All of our Makefiles duplicate huge lists of libraries
in SPDK_LIB_LIST. We have a very precise and accurate
accounting of the library dependencies in
mk/spdk.lib_deps.mk which can be used to generate
the full list if the app specifies the modules and
subsystem libraries it wishes to link.
I did a first pass through all of the existing
Makefiles to take advantage of this new functionality.
There may be more optimizations we can make later but
don't want to hold up this patch for all of them.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icdaf6f749a6908df2c2ce2db22631a4af4ff3a9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5553
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is used to support ABI compatability issue for spdk_app_opts.
Fixes#1484
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6fed777fa15b367f7c3706b8f218d86d56493906
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5330
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
The copy engine library, modules and public APIs have been renamed.
Use of the word `copy` has been replaced with the word `accel`
short for accelerator in preparation for adding new capabilities
in the future. Additionally, APIs for what was previously called
the `memcpy` engine have been renamed to identify the engine as a
software accelerator.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia607aa718416146fbba1e6792b8de0f66bd8a5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Hello_blob example was never run before in autotest.
Change-Id: I1f858bed816471efed947f06107cec981dd562a4
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481570
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
VMD section with Enable flag set to true
need to be defined in config file to
enumerate devices behind VMD.
Change-Id: I814b0a34f87f9e063ded40e1dfb801a2c5fbe4af
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459766
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Blobstore now supports 512B reads/writes to blobs, if the
backing device is formatted for 512B LBAs. The hello_blob
example app was never updated to account for this - so when
running against a backing device with 512B LBAs, it would
fail since it was only reading/writing 1 blob io_unit (512B)
but was comparing a page size (4KB).
Clean up a typo too while we're here.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6cfeeff1c160a24d4c10b68b9dd93717ed79f212
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450069
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Ib9fb94463a69ffd9660ab2c7fbe02826a7e06741
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449796
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds library that will provide ability to notify about
events. On one side each spdk library can specify what kind of
notification it can produce and on the other side libraries can fetch
those notifications.
Example is bdev module, which lib notify about added or removed bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Change-Id: Ia95e564a8a43400b2745d9de8217b9cc84cd1b16
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/431920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This callback type takes 1 argument instead of 2.
Change-Id: Ic3710fafb2828f08fc064f7658849b3d20521092
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We never used this anywhere, and I need to move to a model where
the start up action is a thread message instead
Change-Id: I6b21ba9afb93a3245aceca2fe24713ffd16d0933
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446986
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This removes a ton of duplicate from a lot of
Makefiles. Note that spdk.unittest.mk still keeps
its own app rules, and now just includes
spdk.app_vars.mk instead. Fixing Makefiles that
include this .mk file requires more work that is
deferred for now. We do need to add the
"install: all" rule explicitly to this .mk files.
Note that Makefiles need to include spdk.app.mk
now at the end of the file, so that things like
APP and SPDK_LIB_LIST are defined before including
it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If6823cda135180c37690ffc96c91660b7f0718e3
Reviewed-on: https://review.gerrithub.io/434283
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Application Makefiles can now just add xx_MODULES_LIB_LIST
to SPDK_LIB_LIST. This is possible now since all
SPDK libraries are linked with --whole-archive, so there
is no need to differentiate between "modules" libraries
and other SPDK libraries.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iabf81a388b72d3b2a2f48287a8491ddc977722ac
Reviewed-on: https://review.gerrithub.io/434277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows a lot of simplification to SPDK application
makefiles.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5fa463f6369834b84a8d92e79fa7768082209d7a
Reviewed-on: https://review.gerrithub.io/434274
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This allows us to remove $(ENV_LINKER_ARGS) from all of the
application Makefiles.
Modify spdk.unittest.mk to explicitly set ENV_LINKER_ARGS
to nothing, to avoid DPDK libraries from getting linked
into unit tests. This seems better than creating separate
LINK_C rules for unit tests. Provide a UNIT_TEST_LINK_ENV
flag to allow select unit tests to override this behavior -
it's needed for some of the env unit tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I647f2c848cf434023cf5a1f3a45869bbc4fc8102
Reviewed-on: https://review.gerrithub.io/434145
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The various *_MODULES_LIST are intended for the modules
that implement the specific interface - not for the
associated core library itself.
For example, BLOCKDEV_MODULES_LIST doesn't contain bdev,
it contains all of the bdev modules. Similar for
COPY_MODULES_LIST and copy.
So make SOCK_MODULES_LIST consistent. This is a real
pain because we have to add sock explicitly to a bunch
of individual Makefiles, but I have plans to clean that
up in some future patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0d293372cfb38bfa46c8478a8d9ca9ce23924747
Reviewed-on: https://review.gerrithub.io/434125
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
blob and blob_bdev are already included via the lvol bdev module
dependencies in mk/spdk.modules.mk. This patch adds blobfs there
too.
These changes are needed for some upcoming patches which will
apply --whole-archive to all libraries linked into the application.
That patch will require that we never include the same library
twice.
Shared library builds *require* that blobfs be listed before
blob on the link line, hence adding blobfs here even though it's
not technically associated with a bdev module.
We can also simplify spdk.modules.mk while we're here - just
filter out bdev_lvol to disable lvol for applications like
blob_cli that need to disable it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I01e5e6b91d947463749f942f54c12f48229bbe5a
Reviewed-on: https://review.gerrithub.io/432916
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The thread API is the preferred abstraction for sending
messages now.
Change-Id: I51d6886815e2f20c4726538fc8640c270eeb4854
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will be necessary when the NVMe/TCP transport is added, which will
use the sock abstraction library.
Change-Id: I6561ccdad1ff575db2afa418eab2f2cd24806cb9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416477
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Several apps link against $(COPY_MODULES_LINKER_ARGS) without adding
$(COPY_MODULES_FILES) to the dependency list. This means that those
apps would not get rebuilt if the copy modules were modified without a
'make clean'.
The blobfs example apps were also missing other dependencies; add those
while we're here.
Change-Id: Iac6606b650d32bf21f7f31bd2727f9e92c0da748
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/414888
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This makes more sense as a first class library.
Change-Id: Ibd5c578f8708bd8c7d83fe1629e97c9a3316b56b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414698
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
To support resize operations during I/O, we will need
to send messages to each thread to quiesce I/O while
the resize operation is in progress to guard against
the cluster map memory changing while another thread
is accessing the cluster map.
Therefore, spdk_blob_resize needs to be asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ida037334739b4b80a1dbc76e8f1c70bca8b73582
Reviewed-on: https://review.gerrithub.io/404616
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Modifies behavior of spdk_app_start() and spdk_app_parse_args()
such that they return on failure instead of terminating with
exit().
Change-Id: I82566417f04e1ae2e3ca60a00c72e664db26c9e4
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/401243
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
These new names are much more clear and are aligned with other
functions such as spdk_blob_close.
Keep the old names around for now but deprecate them. We will
remove them in next release.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idc60fd0b19fa2a8b0247a1f5835774d342e721f9
Reviewed-on: https://review.gerrithub.io/400884
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
It is not ideal to have to add this in a bunch of
different Makefiles, but further consolidation of
Makefiles is going to be a more arduous process.
With this change, rebuilding SPDK after no changes
will result in no output - all of the "Nothing to
be done for 'all'" messages have been removed. Note
that DPDK build output still remains - this can be
suppressed by either using an out-of-tree DPDK, or
using SKIP_DPDK_BUILD=1 when using the in-tree DPDK
submodule.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib1d45432f2baaa1d9c1b9509906ee1e77966d3ca
Reviewed-on: https://review.gerrithub.io/399918
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
App line was missing some stuff so that the apps weren't rebuilding
when underlying dependecies changed.
Change-Id: Idecc6296caf48229dfadd57b9da5768f29c9d9e1
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/399456
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Using the ** paradigm is a bit problematic for asynchronous
routines that could fail. Currently we were inconsistent in
that some error paths would zero the pointer while others
did not. So make this just a plain pointer, which simplifies
the API and its implementation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I67147931c6e8350896a4505022a6a314655de3d3
Reviewed-on: https://review.gerrithub.io/391482
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
As part of clarifying the API and preparing for some
future changes, rename the following functions:
spdk_bs_md_create_blob => spdk_bs_create_blob
spdk_bs_md_open_blob => spdk_bs_open_blob
spdk_bs_md_delete_blob => spdk_bs_delete_blob
spdk_bs_md_iter_first => spdk_bs_iter_first
spdk_bs_md_iter_next => spdk_bs_iter_next
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I86bf792717b68379484a6108396bb891fe1c221e
Reviewed-on: https://review.gerrithub.io/391031
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is in preparation for enabling hot remove of logical volumes when
their underlying blobstore device is hot-removed.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I310a3f64f0de5d628609c20a1a3b4d38df0755aa
Reviewed-on: https://review.gerrithub.io/377041
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
hello_context is never NULL when hello_cleanup() is called, and
spdk_dma_free() does nothing if the parameter is NULL.
Change-Id: I7004d70a17e5dc237206b95c26df9b100952df65
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374205
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Example hello world for blobstore that:
- uses the spdk app framework
- uses a malloc backend bdev
- shows the basic blobstore operations
Change-Id: I1662139e6b1fa33c6109006407a11c8c0936ac0c
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/370785
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
