During enumeration all registered pci devices with exposed access to
userspace are getting probed internally unless not explicitly specified
on denylist. Because of that it becomes not possible to either use such
devices with another application or unbind the driver (e.g. vfio).
Change-Id: I9e84ed1d5dc82db75adcb18936cb6d702ee74d78
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4962
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It is possible that a single probe_ctx could be used
to probe multiple newly attached nvme controllers. If
one of those controllers is removed during this process,
the rest of the controllers do not get probed and can
even get stuck in a zombie state.
It is better to just continue with probing the rest of
the controllers.
Fixes issue #1611.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4156ee8b50e8d52cfeee7224f210a58bb773e939
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4945
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
According to the SPEC we should support up to 8192 bytes
of ICD for admin and fabric commands. Transport configuration
parameter in_capsule_data_size is applied to all qpair types -
admin and IO. Also we allocate resources when we get a connection
request, so we don't know qpair type at this moment.
Create a list of buffer in TCP poll group to support ICD up
to 8192 bytes when configuration ICD is less than this value.
The number of elements in this pool is hardcoded, it is planned
to add a new configuration parameter later.
Fixes issue #1569
Change-Id: I8589e3e2ea95d515f5503c6de7c1ee40aaf7b6da
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4754
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Just always put the config file name in json_config_file,
since we now only support JSON.
If user specifies both -c and --json, it will just take
the latter of the two. This is similar to if the user
specified --json twice.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idc21d73acf0e190eda57a7b0c5d9bcfa14e87030
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4858
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This is first commit that should go into latest SPDK
after the code freeze for SPDK 20.10.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie7dc39553206ba747dc83ab6af7ddc2fc25d71eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4854
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Move current scheduler to it's own module
and make use of new API.
Change-Id: I4928aed82603d51de01194c9650709e814f7f61b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4054
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add structures and function for new scheduler API.
Change-Id: I8e379db62189eb7c36092265c137f07368650e9b
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4053
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Each reactor and each thread is assigned with one fd group.
At the same time, each thread is treated as one interrupt source
registered into its corresponding reactor.
The egrp function for reacotr is the only block point waiting
for events.
Change-Id: Id092e66591b07b445342f8ae16dc218d28887427
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4269
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Interrupt is aiming to support interrupt
mode in SPDK application framework.
fd_group is implemented by epoll on linux.
fd_group can be inserted into thread and reactor
to do epoll_wait internally in order to avoid polling
Change-Id: I9077ad648a97fbd68fd46f43de2e16440bedab0b
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4268
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The struct-accessors are added and named matching the fields defined in
the spec. to be used by the fio_plugin/nvme and other consumers of the
driver-layer. Comments to be consumed doc-generators as well as human
readers of the header-file.
The identify example is updated with the change.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: I8d6cb82e095c5dcbc06fe892e17ce83dc0062735
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4835
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added to be used by the fio_plugin/nvme and other consumers of the
driver-layer.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: I945b0aa93c675ad381ce0a83883c41688b549aee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4834
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The new design:
* Supports a generic batching capability in the accel_fw layer
that keeps track of hw accelerated vs sw commands based on
the capabilities of the engine and processes sw commands in the
generic layer while sending a list of commands (not a batch)
to the engines for processing.
* Batch completions are managed via the generic layer, when using
the accel_fw the engines only process commands. With DSA however,
if a list of commands is sent down it will use the DSA public
API to create and send batches but will rely on the generic layer
to complete the batch task itself. When using DSA directly, batching
works as usual (DSA handles batch completion).
* The engine function tables were greatly simplified by replacing
all of the individual entries (copy, fill, crc32c, etc) with one
`submit_tasks` function that is used to both send lists of tasks
for batches or just one task for single shot API.
* Internally batching is now used to re-submit tasks that were queued
for flow control reasons.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I99c28751df32017c43490a90f4904bdabe79a270
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
For virtio-user library and coming vfio-user feature, the client needs
to send the memory file descriptors to target so that the two processes
can setup shared memory region to do data processing without memory copy.
Currently virtio-user will read /proc/self/maps to get memory file descriptor,
since DPDK already provides this such APIs, so here we can just use it,
for existing virtio-user library we may replace it with the new added
API.
Change-Id: Icfeae465d53826d0c8d1b335287634b03cd174aa
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4428
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove spdk_app_get_running_config() that allowed printing
legacy configuration by the apps.
Along with usr1_handler callback that was used to call that
function.
It was only used in iscsi_tgt so it is removed there.
The app_repeat test was using SIGUSR1 to trigger a
spdk_app_stop/spdk_app_start cycle. But we can use
SIGTERM for that instead. While here, do a bit of
cleanup in the app_repeat test app.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie8449e8bcd979b237c68ef94f50fb7a3cb6c19db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4750
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support for the ZNS zone management receive command.
An internal nvme_zns_zone_mgmt_recv() function is created
that matches the parameters of the zone management receive
function in the ZNS specification.
Convenience functions are provided for the following
Zone Receive Action: Report Zones.
Zone Receive Actions not implemented: Extended Report
Zones.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I23589a602336da5dffccec7230d07026a868e81b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4793
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a function to get the number of zones for a zoned namespace.
Since the ZNS specification does not allow zone size == 0,
divide by zero should not be possible on a spec compliant drive.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I15e0ac8a72e244e248b7fb44f7156b182ecd98b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4792
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Add a function to get the zone size of a zoned namespace.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I89429fa2fd36307a8b34bdf91e3251c68596a48c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
This patch removes callback function for subsystems to
present their options for legacy config.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I63076fc03eff45da5d57fab03501602922a20e3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4749
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes function for bdev modules to
present options of the bdevs.
blob_bdev.h refers to the spdk_bdev_module, so would need
to be bumped too.
At this time spdk_bdev_module is left unchanged to prevent
that.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3cacb087c998d928c5d8c2722b7f041d82bb43f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4748
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Add two new public APIs, spdk_nvme_detach_async() and
spdk_nvme_detach_poll_async() to detach multiple controllers in parallel
as a simple manner to users.
Hold the target controller to nvme_ctrlr_detach_ctx because users
will free any object which held it after returning spdk_nvme_detach_async().
spdk_nvme_detach_ctx holds all nvme_ctrlr_detach_ctx in a sequence
by linked list.
spdk_nvme_detach_ctx has a boolean variable polling_started to prevent
the user from calling spdk_nvme_detach_async() while
spdk_nvme_detach_poll_async() is called repeatedly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>i
Change-Id: Ib049c19f7ef24410b963fd5c777a21184f3012d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add support for the ZNS zone management send command.
An internal nvme_zns_zone_mgmt_send() function is created
that matches the parameters of the zone management send
function in the ZNS specification.
Convenience functions are provided for the following
Zone Send Actions: Close Zone, Finish Zone, Open Zone,
Reset Zone, and Offline Zone.
Zone Send Actions not implemented: Set Zone Descriptor
Extension.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I9cc04776c249d2b9c515438b81a0f06aea4198fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Move ZNS specific functions to their own header file:
include/spdk/nvme_zns.h.
This is similar to how it's done for e.g. NVMe-oF with
include/spdk/nvmf.h.
This avoids cluttering the nvme.h header with ZNS specific functions.
A SPDK program that wants to use the spdk_nvme_zns_* functions will
need to include include/spdk/nvme_zns.h, however, this is similar
to how e.g. spdk_nvmf namespaced functions work.
This change is safe to do now, since there is no SPDK release with
ZNS so far.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: If39fab4e7a6924cc3bd67aa0c03e9c6de5f8a324
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_bdev_create_bs_dev_ext() gets not bdev pointer but bdev name
as an argument, and hence vbdev_lvs_create() will get bdev name
accordingly.
However after completing spdk_bdev_create_bs_dev_ext(),
vbdev_lvs_create() has to get bdev pointer from the created bs_dev.
Hence add a function pointer get_base_bdev to struct spdk_bs_dev
and set it to bdev_blob_get_base_bdev() at initialization.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idef0663ace85db0269442212014286669c150069
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4706
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_bdev_open_ext() requires the caller to use bdev_event_cb_t
and bdev_event_cb_t is more extensible than bdev_remove_cb_t.
Hence use bdev_event_t as an argument.
spdk_bdev_open_ext() calls spdk_bdev_get_by_name() inside and
spdk_bdev_create_bs_dev_ext() calls spdk_bdev_open_ext() inside.
The caller needs to know if the spdk_bdev_get_by_name() succeeded.
Hence spdk_bdev_create_bs_dev_ext() returns return code by return
value and returns the created bs_dev by double pointer.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1c225bfb66db036439c69c459f39c86684d8a540
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Since legacy config is being removed, SPDK_ACCEL_MODULE_REGISTER
macro no longer needs field corresponding to processing this
type of configuration.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I76ca02487a5fb8f9ecc9d33ac6fa514e7226a03b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4636
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
After decoding a JSON object we had to free the parsed
strings one-by-one. Not anymore.
Change-Id: I819f1d533e397aa9babca58b5500c38ac01a963d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2753
Reviewed-by: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are more transport on the way and we don't want to add
all their various opts into the single, generic structure.
We'll pass the JSON structure to transports instead. Then
the transport code can custom pull from the JSON any param
it wants.
To complement that, transports will now also have their own
JSON config dump callback. This was only done in the generic
nvmf.c so far, with conditions for RDMA and TCP.
Change-Id: I33115a8d56cec829b1c51311a318e0333cc64920
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: jiaqizho <jiaqi.zhou@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Especially SPDK_INFOLOG() should not call spdk_log_get_flag() function,
instead rely on the log flag structure.
This caused performance degradation in places that used SPDK_INFOLOG
too extensively.
Due to nature of the macros, in the meantime new debug log in
iscsi was improperly named. This wasn't caught because of the
macros reliance on spdk_log_get_flag(), where if name wasn't
registered - no log was printed and no compilation occurred.
Going back to using the structures, gives immediate feedback
that there is no SPDK_LOG_ISCSI log flag.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I262eadb5aee29caa2a5cd719c82ca4963ea24576
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add an new API spdk_bdev_part_base_construct_ext() to pass not bdev but
bdev_name to fix the race condition due to the time gap between
spdk_bdev_get_by_name() and spdk_bdev_open(). A pointer to a bdev is
valid only while the bdev is opened.
In the new API, spdk_bdev_get_by_name() is included in
spdk_bdev_part_base_construct_ext() and the caller has to know if
the bdev exists or not. Hence spdk_bdev_part_base_construct_ext()
returns return code and returns the created part object by the double
pointer.
Another critical change is that base is just freed if spdk_bdev_open_ext()
failed with -ENODEV. The reason is that if we call spdk_bdev_part_base_free()
for that case, the configuration is removed by the registered callback
and so bdev_examine() will not work.
The following patches will replace spdk_bdev_part_base_construct()
by spdk_bdev_part_base_construct_ext() for the corresponding bdev
modules.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2db027a159559c403cdfbd71800afba590b0f328
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will disconnect all connections to a subsystem from a given
host identified by HOSTNQN.
Change-Id: Ibc9cea1f08a58a05dbac3a0bb47df8d8a58e7c10
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4556
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There is nothing left here, so remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
This macro was used in only single place and served no real
purpose.
spdk_log_dump() is more commonly used directly, so use it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idea720cdee767c7c6cdc30db10003ef42b88c4a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4540
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Mellanox Build Bot
There is no need to keep the log level in internal header.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0f732af4a18fd16d9c5b26efc051f122a117a9e2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new API spdk_nvmf_subsystem_add_ns_ext() to pass not bdev but
bdev_name to fix the race condition due to the time gap between
spdk_bdev_get_by_name() and spdk_bdev_open(). A pointer to a bdev is
valid only while the bdev is opened.
spdk_bdev_open() has been replaced by spdk_bdev_open_ext() but the
issue still existed.
Update the corresponding unit tests accordingly.
Then replace the internal of spdk_nvmf_subsystem_add_ns() by
spdk_nvmf_subsystem_add_ns_ext() call.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifcaa2121129ef22d5e61c9a8f7c640ff37a64485
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4485
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This change will allow external libs to register
SPDK log flags and use log macros by external libs.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I03ef088580bbf23bd22ad1a36817ca84c5ba8edd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3954
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.
Starting with this patch literal passed to register,
serves as name for the flag.
All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.
Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Patch further out the series will be removing "SPDK_LOG_"
portion of the literal. They will be made much shorter and
have potential to conflict with some other structures.
Add SPDK_LOG to the structure itself which will make sure
there is no conflict as is now.
For couple patches the structures will have longer than nessecary
names.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If281fa8b7ae027500b980766d90513f8c3ee187a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4494
Reviewed-by: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
a pause
This now also takes a lock instead of requiring a pause of the whole
subsystem.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7de174f3f56d2b3767e723387c4f2257107d8b19
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4581
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The list of allowed hosts is only checked during handling of CONNECT
commands - not in the main I/O path. Protect that list with a mutex
instead of requiring a full pause of the subsystem to allow
dynamic management of the allowed hosts without impacting any
active I/O.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3f7e87cc1fa6de200c422928c07153fc60fab28c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
With new funtion it is allowed to successfully parse json values even
if doceder for given key is not found.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I036f263e9050bd2b96aaa3ff61a9542c98365892
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4340
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When uring is enabled, uring socket implementation is
used to create sockets. We may want to use posix sockets
for some reasons (e.g. performance tests). This patch adds
a new API function to set the socket implementation which
will be used by default, e.g. when no impl_name is passed
to spdk_sock_connect/spdk_sock_listen functions.
Misc changes: include spdk_internal/log.h to register
SOCK log component. The new include header already
includes spdk/sock.h and spdk/queue.h, sow remove
direct inclusion of these headers.
Change-Id: I4abad0a59cd033b15bd43a00e3dbdf313fa6b06c
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4327
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add getters to the ZNS specific data structures, so that an
SPDK application, e.g. examples/nvme/identify/identify.c,
has the ability to get and utilize the information in them.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I26056161093cc811acb6840ff7e2068e5f6058f6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We will later create a lib/nvme/nvme_zns.c file containing zoned specific
operations on a namespace. Since the functions in SPDK have to be
namespaced by prepending the name of the library to the function name,
rename the ZNS data structures in order to make them more aligned with
the coming function names of the getters for these data structures.
Renaming these structs are safe, since they are currently not used by
anyone.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ifd2a99e945806b49f9b213e704acce8d8d2c7037
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4455
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
This option will be used to disable zero copy
for admin qpair. This is needed since the admin
qpair's socket is not connected to socket poll group
and we can't receive buffer reclaim notification.
Change-Id: Ibfbb8a156aafcd7ba8975a50f790da7fbd37d96f
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4210
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently, the scsi bdev only supports the hotremove event,
and the scsi library uses the deprecated `spdk_bdev_open` function.
In this patch, add the resize event support, so the upper layer
could do more actions, like vhost-scsi could notify the guest os.
For the scsi compatibility, add _ext suffix for some public api.
Change-Id: I3254d4570142893f953f7f42da31efb5a3685033
Signed-off-by: Li Feng <fengli@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4353
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add spdk_nvme_ns_get_ana_group_id() and spdk_nvme_ns_get_ana_state()
to getthe ANA group ID and the ANA state of the given namespace,
respectively.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id5f1f7ee488a1eb2a7a77f9986a3bb89146628e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4354
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was not used by anything. It was intended for use by user-space
TCP stacks.
Change-Id: I416589e421784882c693bcc5b03fe1dbcc4b1bd3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4297
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add the I/O Command Set Specific Identify Namespace Data Structure
and the I/O Command Set Specific Identify Controller Data Structure
for the Zoned Namespace Command Set.
These data structures are defined in the NVMe Zoned Namespace Command
Set Specification.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I1434765ecbb22e1020c6b299cd05ba8a614b1cda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4310
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The poller is now created internally to the library whenever a target
is constructed. Applications are not expected to poll for connections
any longer.
Change-Id: I523eb6adcc042c1ba2ed41b1cb41256b8bf63772
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In cases where the SPDK nvme driver is being used as a validation/test
vehicle, users may need to allocate a currently unused qid that can be
used for creating queues using the raw interfaces. One example would be
testing N:1 SQ:CQ mappings which are supported by PCIe controllers but
not through the standard SPDK nvme driver APIs.
These new functions fulfill this purpose, and ensure that the allocated
qid will not be used by the SPDK driver for any future queues allocated
through the spdk_nvme_ctrlr_alloc_io_qpair API.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I21c33596ec415c2816728a600972b242da9d971b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3896
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk_bit_pool is a wrapper around spdk_bit_array with the
intentions of providing much better performance for allocating
from a fragmented bit array. The cost of searching a large bit
array for a cleared bit can become expensive so the spdk_bit_pool
will provide an ability to track extents of recently cleared
bits.
This initial commit does not adding the tracking yet - it is strictly
a wrapper around spdk_bit_array with enough functionality to replace
the use of spdk_bit_pool in SPDK blobstore with equivalent performance.
This will allow us to switch blobstore to use this minimal
wrapper first, and then iteratively improve spdk_bit_pool to provide
the better performance.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I95d0d12db47eac73e0641eb7f94fa5df43d42e45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3974
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
There is no need for this interface to be async.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I1f21b53e90b7d165b6b5fb2e1226ce7591966b58
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4181
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
It was introduced for the purpose of executing fabric cmds when
subsystem and qpairs are not active. It was rather workaround than
solution for transport type like vfio-user. spdk_nvmf_request_exec
is a preferred way of passing request obj into nvmf layer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I4f989de27bfd494c744017599909c2e200f0f233
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4180
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch is used to enable placement_id getting
in sock layer and also add the rpc support.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I70de57b0ed392a0aefce9d3ff1f61ef924015a87
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4146
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support for getting the Command Set Identifier for a given namespace.
The SPDK_NVME_CAP_CSS_IOCS feature can be implemented on top of an old NVMe
specification. If the feature is set, retrieve the NS ID Descriptor List
regardless of the NVMe specification version. The quirk is still respected.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I7b257115ecb0d813ba75201c0f48960c7070dcc9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4085
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add trid to struct spdk_nvmf_qpair and initialize it at initialization.
admin_qpair->trid will be used to get the corresponding
subsystem_listener via nvmf_subsystem_find_listener() and add it to
struct spdk_nvmf_ctrlr in the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0d1a41aede60de88747eff16c7e04f63d0702596
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4009
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When tested on Linux 5.8 kernel and configure spdk
with debug mode (--enable-debug), and test SPDK NVMe-oF
tcp transport, and we see the coredump in sock_map_release
with the following statements:
assert(entry->ref > 0);
After debug, I can confirm that the placement_id value got
from the following function (sock->net_impl->get_placement_id)
changes.
It means that: When the sock is added into the poll group
(spdk_sock_group_add_sock), we get the placement_id (named as
Value(begin)); and when the sock is removed from the poll group
(spdk_sock_group_remove_sock), we get the plaemednt_id on
the same sock (named as Vaule(end)). I found that
Value(begin) ! = Value(end).
So our solution is for a socket, we will get placement_id once,
then we can solve this issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia1d0cf39247b53410260561aca5af38130cc0abb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3983
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Allow toggling log timestamps on and off by adding new RPC call.
Change-Id: I34c84bf89fae352ade266fbf7fd20594ff67bced
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2024
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Patch (922d90c8) removed backtrace printing.
Some of API was leftover in header files,
so this patch removes them.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ieb2069e707dee2a196f0cecc283064661a0ae9a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3953
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Registration macro now generates function based on driver's name.
It allows to have multiple registration within single source file.
Similar pattern is used e.g. by SPDK_NVMF_TRANSPORT_REGISTER.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ied0887e8dae7fe9ca1517313be5eff8f218b7e98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3895
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The one large global mempool was a waste of memory for apps that
don't use the accel framework as its always allocated a pool sized
to handle a heavy load with multiple threads.
Instead move to a per channel list of just 1024 tasks greatly
decreasing the memory footprint but still able to scale as more
threads are added.
Also renamed all accel_req to acccel_taak and simply task to
accel_task as this was being touched anyways and not consistent.
fixes issue #1510
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I0e93ca6270323e2df4b739711c5d9b667a52e1eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3740
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK poller uses microsecond as the input parameter, so we need to
change the correct value when opts.association_timeout is expressed
by millisecond.
Change-Id: Ia674f0115ea176b998e4c0c70b8ce75b28984701
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3861
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
After supporting ANA reporting by default, Linux kernel 5.3 reported
error when parsing NVMe ANA log. The newer kernel fixed the issue
but we should optionalize ANA reporting feature to avoid error for
Linux kernel 5.3 or before.
Add a bool variable ana_reporting to struct spdk_nvmf_subsystem
and disable ANA reporting and initialization of related variables
if it is false. We can expose MNAN (Maximum Number of Allowed
Namespaces) even if ANA reporting is disabled. But MNAN is not
required if ANA reporting is disabled. So do not set MNAN if it is
false too.
Add a public API spdk_nvmf_subsystem_set_ana_reporting() to set
ana_reporting by the nvmf_create_subssytem RPC.
The next patch will add ana_reporting to nvmf_create_subsystem RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icc77773b4c9513daba2f1a9fdaf951d80574f379
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3850
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The bdev_examine_bdev api will examine a bdev explicitly. After
disabling the auto_examine feature, a user could call
bdev_examine_bdev to examine a specific bdev he/she wants.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: Ifbbfb6f667287669ddf6175b8208efee39762933
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3219
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes implementation of VPP socket abstraction
along with ways to compile it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I089f7703cfc4fb517f8f80f4368e544bced549b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3734
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
After CC.EN transitions to ‘0’ (due to shutdown or reset), the
association between the host and controller shall be preserved for at
least 2 minutes. After this time, the association may be removed if
the controller has not been re-enabled.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: I4734600067fd4b7306b46f1325fdd5031e81c079
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2984
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This function should be the synchronization point for all
disconnects regardless of whether they begin on the transport,
from an RPC, or in response to application termination.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If3553ab3a9e265b0938c84832cb9f774852d7565
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3674
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This API differs from spdk_nvmf_tranpsort_stop_listen in
that it also disconnects the qpairs associated with
that listener.
Change-Id: Iadfc6d2debc0ef8f1a8cd5db4f20168aeae8264d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3279
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
TCP delayed ACK can be disabled or enabled by enabling or disabling
quick ACK, respectively.
The recently added spdk_sock_impl_opts is helpful for sock library
to control quick ACK.
Hence this patch adds and uses an option enable_quickack. The option
is effective only for the POSIX sock module.
We have spdk_sock_opts now too but spdk_sock_impl_opts will be better
for this case.
This option is not supported on FreeBSD. FreeBSD users can set the
option globally via sysctl if desired.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic89620267acce5872dc8ecaf7a99bb70ae97e993
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3603
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Because of the Linux kernel has limitation, IORING_SETUP_IOPOLL is only
used for local devices (e.g., local files, pcie NVMe SSDs etc.). However,
it does not work for devices atttached from the remote. So in order to
make bdev uring generic, Let's do not use IORING_SETUP_IOPOLL to create the
uring.
Change-Id: I6aea1ff222a8a0d67ab040ada75aa0ef6730e725
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3587
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit 6194cb2e15.
It's unclear whether we need to add a new API for the env layer
for upcoming work. Nothing currently uses it. When we have a clear
need, we can add this back in.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I174276799d650a1365b37a737271a54a796cd455
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3561
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added to the framework as well as all 3 engines. Needed by apps
in the event that they have to fail following the creation of a
batch, allows them to tell the framework to forget about the batch
as they have no intent to send it.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id94754ab1350e5a969a5fd2306bd59c38f0a0120
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3389
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Now that drivers can be registered from upper layers there's
no need to keep them centralized inside env.
(check_format.sh complains that spdk_pci_nvme_get_driver() shouldn't
start with the spdk_ prefix - to workaround that we move the function
declaration from one place in env.h to another - that's enough to
convince check_format it really is a public function)
Change-Id: If86aebd6c997349569c71430ec815b413eb44ef8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3187
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This allows SPDK apps to register new PCI drivers outside of
the env layer, enabling SPDK as a whole with new use cases.
Change-Id: I0c998a9ec249c3ca610b7b3b8b6caf616b16f64c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3185
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
An alternative to spdk_pci_*_get_driver();
Change-Id: I20a80b3c655a37fb1c76da21c2b70d5678041fab
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3186
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Not needed with new scheme around accel_task in prior patches.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic6f16654db62fe1dc51b0822f0ff92261da4494c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3212
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was sort of a clunky interface requiring a couple of inline
functions in every app that wants to use the accel_fw moving
forward. By having the accel_fw public API accept a callback arg
instead of an accel_task combined with adding a pool of accel_tasks
in the accel_fw engine we can eliminate this.
After changing the parm to a cb_arg, changes were made to all accel_fw
interfaces to put cb_fn and cb_arg as the last parms in public and
private function calls.
Related bdev_malloc changes need to be in this patch in order to pass CI.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2b75764e534562d91484a094c3352266156d8425
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3209
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With this patch, spdk_app_start/stop can be repeatedly
called by users based on their upper level application's
requirement.
Changes are:
* Add reinit ability inside spdk_env_init and related functions
* Clear g_shutdown_sig_received in spdk_app_setup_signal_handlers
* Clear malloc_disk_count in bdev_malloc_initialize
Change-Id: I2d7be52b0e4aac2cb6734cc1237ce72d33b6de0c
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2260
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The new abort functionality doesn't take custom admin cmd
handlers into account.
This commit allows setting a custom admin cmd handler
for abort that provides the ability to influence the
bdev lookup to which the abort is sent to.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: I3a66c6f863f5ee4d89cb2194dffdc6855945fa8a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3485
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Zero copy send can cause performance degradation with small
payloads. This patch adds an option to disable it if required. By
default zero copy is enabled.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I14f2b21ad375e770cb08f850360898bac675b351
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Receive pipe reduces number of system calls and gives significant
performance improvement with kernel TCP stack and relatively small IO
sizes. With user space TCP/IP implementations there are no system
calls and double buffering introduced by pipe has negative impact on
performance. Receive pipe remains enabled by default.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ic5ddee42293df2c233ba7ffbe6662de7917ac586
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This follows struct rte_pci_id which had class_id as well.
We'll need it to make some additional DPDK APIs public through
the env abstraction.
Change-Id: I794a6cd6b17e48daf53b48fa5abe3d3dcfeaa403
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3182
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
You don't get notified when someone starts using your hooked
device, so there's not much gain from knowing when someone
stops.
Remove that callback and also move DPDK device detach under
the same lock which sets the pending_removal flag. This eliminates
a data race window when hotremove notification could arrive
after device was detached, but before it was scheduled to be
removed.
vmd and ioat nest the spdk_pci_device struct and abigail complains
even though the parent structs only have forward declarations in
public headers. Adding those two structs to the suppression list
doesn't help though. Abidiff still complains about the pci device
struct being changed, probably because ioat.h and vmd.h both include
env.h. Abidiff suppresion list should eventually be split per-lib,
but for now ignore struct spdk_pci_device changes globally.
$ abidiff [...]/libspdk_ioat.so [...]
'struct spdk_pci_device at env.h:652:1' changed:
type size changed from 1024 to 960 (in bits)
1 data member deletion:
<SNIP>
Change-Id: I9b113572c661f0e0786b6d625e16dc07fe77e778
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2939
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also one small bug fix w/compare in accel_perf as a result
of changes made in accel_perf sicne base compare was added.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id8e67bd9de9cbd006ac148f4a77807cc3e8e662b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2958
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Also update accel_perf to support it.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ida7b863de02c64239ec4cfbdc3b0235d4e0521f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2954
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also as a minor drive-by, added verify capability for fill that
wasn't there before, useful in making sure the prep function
was working and really should have been there anyway.
idxd support for prep fill will follow.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib54311c1fb98abd2fb61df6603cf3c5300b71161
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2952
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Adds support for both the accel fw and the sw implementation.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib8748f272a688a074ca475a86dea14179acc020d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add disable_sections_merge() procedure that will allow
to have multiple sections with a same name.
This behaviour is how FIO treats such sections
and so will be used in bdevperf config file.
Change-Id: If221daeb7753d91b5d2608d25ccbb16f2d43ccce
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3433
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
1 Change the default factor from 4 to 8, which can be used
to improve the performance.
2 Change the base buffer size in nvme_tcp.c,
we should not use sizeof(struct spdk_nvme_tcp_cmd),
it is 72 bytes. Normally, the initiator will receive
C2h pdus and R2T Pdus by most, so set the size of using
sizeof(struct spdk_nvme_tcp_c2h_data_hdr) is enough.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I384f4cb026cb8d83e75b639f7256ee8cb8ed1df1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3283
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Includes a few related changes:
* slight refactor to have common prep function for batch prep
commands in the sw engine
* added support for dualcast batching in accel_perf example app
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If9f078a0f8eb509d296e60a94331c92a72f8cb10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2913
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This macro works only in debug build, in release it always returns
false.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I949ac5f3e3ff811bd4590645300c536c5a6afab6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3358
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make the abort execution timeout value as optional.
Zero is acceptable and means immediate timeout.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4b03c65b8bd15899f48be9476ee657446147581
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3104
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add three variables, poller, timeout_tsc, and req_to_abort to
struct spdk_nvmf_request to wait until the request to abort is
abortable without using any dynamically allocated context.
struct spdk_nvmf_request is already very large (968 bytes), and
the pahole tool checked these variables did not create any extra hole.
Poller pointer and timeout value are usable for other potential
cases, and so use generic names.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7202ade181365ab586d8c30383b3ea0fef82dcff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3260
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
State machine is different among NVMe-oF transports and is
encapsulated to the transport neutral NVMe-oF controller and
NVMe-oF qpair.
To implement abort operation for each NVMe-oF transport,
add a function pointer qpair_abort_request to struct spdk_nvmf_transport_ops
and a stub nvmf_transport_qpair_abort_request() to encapsulate
which transport is used.
The following patches will implement qpair_abort_request for each
transport. Each qpair_abort_request() is responsible to call
spdk_nvmf_request_complete() for the abort request.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2beac959ed428c5108cf33691226b7fae5cd24d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3007
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
A new API spdk_nvme_ctrlr_cmd_abort_ext() gets cmd_cb_arg as a
parameter, and use it to abort requests whose cb_arg matches cmd_cb_arg.
The caller can set the parameter qpair to NULL if it wants to abort
requests on admin qpair.
Hold ctrlr->ctrlr_lock throughout because abort request is submitted
to admin qpair.
The API is not critical for performance, and so initialize parent
data first.
The API is for a specific qpair, and so hold SQID in the parent,
and it is copied to the children. On the other hand, CID is set
to child when request to abort is found.
Use an new helper function nvme_transport_qpair_iterate_requests()
to add abort request for each outstanding request which has
cmd_cb_arg as its callback context.
The case is possible such that the request to abort is not outstanding
yet but queued. Hence abort queued requests which has cmd_cb_arg
as its callback context too, but it is done only if there is no error
so far.
If only queued requests are aborted and there is no outstanding
request to abort, complete with success synchronously.
If there is no outstanding or queued request to abort, return -ENOENT.
When any abort request is submitted, the difference between success
and failure is only bit 0 of CDW0 according to the NVMe specification.
We cannot the existing helper functions nvme_request_add_child() and
nvme_cb_complete_child() but can use nvme_request_remove_child().
nvme_qpair_submit_request() may use only nvme_request_remove_child()
from these three helper functions. Hence we use req->parent as other
types of request do.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3a271c6542f8e2e6b425b3bf6151f41e924bc200
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2039
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new macro spdk_nvme_cpl_is_abort_success(). This will be used
in NVMe driver and NVMe bdev module later.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8348f54ed8c9fd0238661f7d7e61e9e6f36f33c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2800
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch only includes the basic framework for batching and the
ability to batch one type of command, copy. Follow-on patches will
add the ability to batch other commands and include an example of
how to do so via the accel perf tool. SW engine support for batching
will also come in a future patch. Documentation will also be coming.
Batching allows the application to submit a list of independent
descriptors to DSA with one single "batch" descriptor. This is beneficial
when the application is in a position to have several operations ready
at once; batching saves the overhead of submitting each one separately.
The way batching works in SPDK is as follows:
1) The app gets a handle to a new batch with spdk_accel_batch_create()
2) The app uses that handle to prepare a command to be included in the
batch. For copy the command is spdk_accel_batch_prep_copy(). The
app many continue to prep commands for the batch up to the max via
calling spdk_accel_batch_get_max()
3) The app then submits the batch with spdk_accel_batch_submit()
4) The callback provided for each command in the batch will be called as
they complete, the callback provided to the batch submit itself will be
called then the entire batch is done.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4102e9291fe59a245cedde6888f42a923b6dbafd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2248
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Having functions without qpair on the interface allows for wider usage
e.g. by nvmf layer.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I3a51ad53f00eb29e2ba2681ef4ff0cc2a197b65d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3176
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
This allows users to configure the number of
connection requests outstanding to an rdma port
at once.
RPC included.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I8a2bb86b2fb7565cb10288088d39af763b778703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3097
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
To abort requests whose cb_arg matches, add child abort request greedily.
Iterating all outstanding requests is unique for each transport but
adding child abort is common among transports, and adding child abort
is replaceable by other operations.
Hence add qpair_iterate_requests() function to the function pointer table
of transport, and pass the operation done in the iteration by a
parameter of it.
In each transport, the implementation of qpair_iterate_requests() uses
TAILQ_FOREACH_SAFE() for potential future use cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic70d1bf2613fce2566eade26335ceed731f66a89
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2038
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Poller should return status > 0 when it did some work
(CPU was used for some time) marking its call as busy
CPU time.
Active pollers should return BUSY status only if they
did any meangful work besides checking some conditions
(e.g. processing requests, do some complicated operations).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id4636a0997489b129cecfe785592cc97b50992ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Definitions for the new I/O Command Set aka. Namespace Types.
Definitions include CNS values, controller capability values, controller
configuration values, and command specific error codes.
Also, addition of the "old" controller capability and configuration
value for "No I/O Command Set or Admin Only".
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: I1256d657d306299365d1aa40b943070b31fcd489
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2932
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Export iova-mode parameters in spdk which is useful in
VM environment.
Change-Id: I3f4756b2c3b6cf5d1964a50bbf63f9c596997696
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2910
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This API is a wrapper for rdma_accept which allows
to remove spdk_rdma_qp_init_attr::initiator_side.
Change-Id: Iba2be5e74e537c498fb11c939c922b2bbda95309
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add to both accel framework and add sw engine implementation.
IDXD implementation and accel example app patches to follow.
Dual-cast copies the same source to two separate destination buffers.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7df28518505f0d4bbb32cc8e69eb8a231fb29452
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2127
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Dual-cast copies the same source to two separate destination buffers.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icadae34a75c35e2db672a193287b147416012a5a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2129
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
This might be helpful if secondary processes cannot start due to
conflicts in address map.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I180dc09b4cad3b0064f009b0f553f5929de6566c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2776
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Calling spdk_nvmf_tgt_accept() now automatically assigns new qpairs
to the best available poll group.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3df2a2c5a28dba45c5ba0cbd1e8c28dd7e56cf9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2813
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We don't want these internal functions to show up in the
object files with an spdk prefix.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic14cbe2963e176bddbff1a729b503f972a78419d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2871
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is technically a function that will remain
static in the library where SPDK_BDEV_MODULE_REGISTER
is invoked. It was missed in earlier checks because it
is created via a macro.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I32a59f88bb7c112183763f222d4e1c8c864c545a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2794
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
For completeness, now all output is placed into build/ in the
appropriate location. In the future, 'make install' can be changed
to simply copy from there instead of rebuilding.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I236b37868b5f4a2d5c5b910090aeaa9dff0501e2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2381
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The plan is to push the logic that assigns qpairs to poll groups down
into the nvmf library. To do that, we'll need to have a list of the poll
groups.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Iea59ac1a439dbd1bcae68fb2977a47a855884a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2811
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
bdev_io is passed to the callback to the timeout I/O, but the context
of bdev_io is stored in cb_arg and spdk_bdev_abort() needs cb_arg.
Hence add an new helper function, spdk_bdev_io_get_cb_arg(), to get
cb_arg of bdev_io.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5eb25ffdad2467c55a1b55f8cf0accef8799bb4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The I/O aborted by the abort command should be completed with SC = 07h, i.e.,
"Command Abort Requested". However, if the generic bdev layer or non-NVMe
bdev module aborted the I/O, the aborted I/O would complete with SC = 06h, i.e.,
"Internal Error". To fix this unexpected behavior, add an new I/O status
SPDK_BDEV_IO_STATUS_ABORTED and update spdk_bdev_io_get_nvme_status() to
set SC to 07h if the I/O status is SPDK_BDEV_IO_STATUS_ABORTED.
If the NVMe bdev module aborts the I/O, the I/O status is set to
SPDK_BDEV_IO_STATUS_NVME_ERROR and SC is set as expected.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifc99a97248a8d54a8c8d2fab74a90c7ce99c2e6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2582
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add spdk_bdev_abort function as a new public API.
This goes all the way down to the bdev driver module and attempts to
abort all I/Os which has bio_cb_arg as its callback argument.
We can separate when only a single I/O has bio_cb_arg and when multiple
I/Os have bio_cb_arg, but unify both by using parent - children I/O
relationship. To avoid confusion, return matched_ios by _bdev_abort() and
store it into split_outstanding by the caller.
Exclude any I/O submitted after this abort command because the same cb_arg
may be used by all I/Os and abort may never complete.
bdev_io needs to have both bio_cb_arg and bio_to_abort because bio_cb_arg
is used to continue abort processing when it is stopped due to the capacity
of bdev_io pool, and bio_to_abort is used to pass it to the underlying
bdev module at submission. Parent I/O is not submitted directly, and is
only used in the generic bdev layer, and parent I/O's bdev_io uses bio_cb_arg.
Hence add bio_cb_arg to bdev structure and add bio_to_abort to abort structure.
In the meantime of abort operation, target I/Os may be completed. Hence
check if the target I/O still exists at completion, and set the completion
status to false only if it still exists.
Upon completion of this, i.e., this returned zero, the status
SPDK_BDEV_IO_STATUS_SUCCESS indicates all I/Os were successfully aborted,
or the status SPDK_BDEV_IO_STATUS_FAILED indicates any I/O was failed to
abort by any reason.
spdk_bdev_abort() does not support aborting abort or reset request
due to the complexity for now.
Following patches will support I/O split case.
Add unit tests together to cover the basic paths.
Besides, ABI compatibility check required us to bump up SO version of
a few libraries or modules. Bump up SO version of blob bdev module simply
because it does not have any out-of-tree consumer, and suppress bumping
up SO version of lvol library because the affected struct spdk_lvol
is not part of public APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I515da688503557615d491bf0bfb36322ce37df08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Having spdk_vhost_blk_get_dev required us to bump up the SO version
the vhost library when we updated bdev.h but spdk_vhost_blk_get_dev
has not been used publicly, and can be inlined very simply.
So remove spdk_vhost_blk_get_dev from include/spdk/vhost.h and inline
it to the place which had used it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I98c233b81d7980d4e2c5bd3c0a65d747f183e1e9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is used to make spdk_nvme_connect can support
the old library for compatibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I49d92fb473c3cbabd8e1240785b920480202eee9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1998
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Having that transport can decide about particular ctrlr attributes not
globally but per ctrlr.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ia3fb0d4e576cb9f8ce6df75f775e2fd5727d7f48
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2757
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Useful for transport specific layer to inform that SGLs are not
supported or to adjust settings.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ia849f5af206538408664fd20ea4e7dcb9da6f6f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_nvme_cuse_update_namespaces() API allows application
to repopulate namespaces on NVMe CUSE devices.
Change-Id: I5375b13bcc91b17cd26b4dc6f02d83dc33826542
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/658
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Thus, we can make sure that when read data is larger than
the pipe size, it will not read the data into the pipe.
Change-Id: I87f3b03fd9b81eb693e9eae0fea9eef7d1b9eaa8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_sock_impl_get/set_opts functions allow to set different socket layer
configuration options. Options can be set independently for each
socket layer implementation.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I617e58366a153fae2cf0de1b271cc4f4f19ec451
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/607
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: Ieadf271a0c8530f2440cded05ad139483a8c5937
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2383
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Along with the sw engine back end implementation for it. IDXD
back end will follow, the use in the accel perf tool as part
of verify.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia1013cd884ff71990f898320d6a22e96e16ad2a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2107
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The spdk_mem_reserve() function reserves a memory region in SPDK's
memory maps. This pre-allocates all of the required data structures
to hold memory address translations for that region without actually
populating the region.
After a region is reserved, calls to spdk_mem_register() for
addresses in that range will not require any internal memory
allocations. This is useful when overlaying a custom memory allocator
on top of SPDK's hugepage memory, such as tcmalloc.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ia4e8a770e8b5c956814aa90e9119013356dfab46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2511
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Verbs implementation: doesn't differ from the original:
- send_wr: saves WRs in the qpair internal structure
- flush_wr: calls ibv_post_send
Direct Verbs implementation:
- send_wr: calls ibv_wr_start for the first WR;
Calls opcode-specific function to add a WQE to SQ
Tracks queued WRs to return a correct pointer to 'bad_wr'
- flush_wr: calls ibv_wr_complete - it flushes to the NIC
all WRs added between ibv_wr_start and ibv_wr_complete
Change-Id: I65a26914db688af20589f3b69a994d214d860726
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1659
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The new RDMA provider can be enabled by passing
--with-rdma=mlx5_dv parameter to configure script
This provider uses "externally created qpair"
functionality of rdma cm - it must move a qpair
to RTS state manually
Change-Id: I72484f6edd1f4dad15430e2c8d36b65d1975e8a2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1658
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is a wrapper over RDMA CM rdma_disconnect function
The wrapper is needed since in Mellanox Direct Verbs
(aka DV) we must move qpair to error state manually
before calling rdma_disconnect
Change-Id: Ia8623c6989e7679591f2da56bafa7f4262eeebf9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1975
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
RDMA provider is used as an abstraction layer and allows
to add vendor specific verbs implementation. This patch adds
an interface to create and destroy qpairs and its implementation
using regular verbs API.
Future patches will add functions to queue/flush Work Requests,
enable usage of RDMA providers API in NVMEoF target/initiator and
add Mellanox Direct Verbs implementation. This abstraction layer
is flexible enough to add other vendor's implementations.
The choice of a specific RDMA provider will be made at
the configuration step, it doesn't add any runtime overhead.
Change-Id: If8eec5bd45c82c71f73a14f6e84121cd02a1d65d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The bdev_auto_examine flage will impact how bdev layer examine a
disk. If bdev_auto_examine is true, the bdev layer will examine all
bdevs as usual. If bdev_auto_examine is false, the bdev layer will
only examine a bdev if it is in a whitelist.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: If5b26283905f97f8a95ae9065226fa3dae6c27a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2114
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add the CRC function at the framework level and implement the
software engine back end to use ISAL. The patch series will continue
to include an option for accel_perf to test CRC as well as IDXD
implementation.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4eff3bbcf98c0bc2928a48272a57031c8b96394e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2072
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Some users of SPDK API, such as OCF,
may want to generate logs with arguments themselves.
In that case they would need to first create a buffer
and then pass that buffer as a single argument to spdk_log().
This change adds spdk_vlog() which accepts va_list as argument list,
so it is easier to use spdk_log().
Change-Id: Ie2a3ac481035a250fcd68d0f9b8292008ebb6fe0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1946
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Allowing for custom crc32 polynomials isn't really within the scope
of SPDK. SPDK libraries have shifted over to using more optimized
versions of these functions wherever possible (e.g. ISA-L).
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ie4837010874e957481dd00896389b38c842445e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2424
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: I2a8b70aa92828cf60d168dcf2985759e0eb9a6e3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2217
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This file isn't exclusive to the nvme lib. As such, it shouldn't
use the internal SPDK_LOG_NVME flag.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib6d239ad2e45e58fb97a5ea70b01ce72afa938c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2246
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In spdk_log() accept filename = NULL.
If filename is NULL then source information as well
as log level is not displayed.
This change allows to replace all usages of
printf() and fprintf(stderr,) by
SPDK_PRINTF() and SPDK_ERRLOG() which use spdk_log().
Using spdk_log() instead of printf() is always prefered
since SPDK can be used inside of another application
where SPDK logs could be redirected.
SPDK uses printf()
places where location info is not needed
we cannot replace it by SPDK_NOTICELOG().
This change is in the scope earlier planned task:
https://trello.com/c/lZzBjrw3/10-remove-use-of-printf-fprintf-and-perror-for-logging-in-library-code
Change-Id: I55c24da4a2092bd118fa2c121092d253cedb1cf8
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1942
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add both the plumbing in the engine to call module entry
points if they exist as well as the json write config
for idxd (the only module with config info at this time).
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I91376d3fc60227cd79fae17b164722619eafb9e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2052
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was added before the usage of having a SW engine and 2 HW
engines was fully thought out. The current rules are:
* if no HW engine specific enable RPC is sent, use SW
* if a HW engine specific enable RPC is sent, use it
* If a 2nd HW engine specific enable RPC is sent, ignore
In this scheme there's no need for an RPC that lets the user
choose which engine to use because they already do so when
they enable an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I006ffb3b417f1e93bb061b29535d157ba66f03b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2033
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
reduce library uses unlink, but the unit tests need to
override it in a specific way.
But linking unit tests with LTO requires the wrapper
definitions be in objects/libraries listed *after*
the object/library that refers to it. So we need to
make the unlink wrapper somewhat generic. We do this
by exporting a string and callback function that the
user can set to enable a user-defined function to be
called when unlink() is called with a specific file
name.
Also revert 3ef6d06 as part of this patch, since we
no longer require the workaround that it implemented.
Fixes issue #1357.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1ee4c424ad31fe7d91d7b524ed47aedd279e5b5c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1948
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch also implements the new API for the 3 existing engines.
There was also some minor clean in one file, moving a function to
eliminate multiple forward declarations (there would have been
another one with this new API).
The next patch will use this API in the accel perf tool.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4ebc9cb3d1c588919235b5080cbeec29189efa21
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2025
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Useful for transport specific layer to inform that Keep Alive is not
supported or to adjust granularity.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I636fda3eadcb96cd8a4b79570fc4e3cc6a58fe93
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Virtual controller capabilities can be overridden on transport
specific layer. The current behavior shall be preserved.
This can be useful to limit or extend the default based on transport
type.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I754f0d957a46f219adc1e55f792e79c7546ddb43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: To set the priority of the NVMe-oF connection especially
for TCP connection.
For example, the previous example can be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420
With the change, it could be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420 priority:2
The priority is optional. We try to change
spdk_nvme_transport_id but not in spdk_nvme_ctrlr_opts since
the opts in spdk_nvme_ctrlr_opts will reflect in every nvme ctrlr,
this is short of flexibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I1ba364c714a95f2dbeab2b3fcc832b0222b48a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1875
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: This is used to make users can specify
some options on the socket, e.g., the different priority for the socket.
While creating sockets, the priority needs to be set before connect()
and listen system calls, so better to add one parameter in spdk_sock_opts
which can contain options (e.g., priority) in spdk_sock_listen_ext and
spdk_sock_connect_ext functions.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I406238e9da7abd69f937b7072535a19124ed0169
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1874
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Last and only usage of struct lvol_task was removed in
previous patch.
Since it is no longer used, remove the structure itself.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3612106de2ab3a9197245de078c73c53beeff443
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was changed to better facilitate thread safety.
In next patch a lock will be held when going over the
cuse devices list.
Now user is expected to pass a buffer of a sufficient size
that will be filled with ctrlr or ns cuse device name.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3202ef285e427111e3595389619463fda58dbef6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1978
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unregistering nvme_cuse when the device did not exist
resulted in SEGFAULT within nvme_io_msg_ctrlr_unregister().
To prevent that, when no nvme_cuse is registered for the
ctrlr do not unregister nvme_io_msg_producer.
RPC and spdk_nvme_cuse_unregister() now return an error.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id77cebe23ff91023a24cfe091f5f62a76a9175fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1921
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Docs, RPC, unit tests, etc., will follow. Notes:
* The current implementation will only work with VFIO.
* The current implementation supports only the existing accel
framework API. The API will be expanded for DSA exclusive features
in a subsequent patch.
* SW is required to manage flow control, to not over-run the work queues.
This is provided in the accel plug-in module. The upper layers use public
API to manage this.
* As we need to support any number of channels (we can't limit ourselves
to the number of work queues) we need to dynamically size/resize our
per channel descriptor rings based on the number of current channels. This
is done from upper layers via public API into the lib.
* As channels are created, the total number of work queue slots is divided
across the channels evenly. Same thing when they are destroyed, remaining
channels will see the ring sizes increase. This is done from upper layers
via public API into the lib.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ifaa39935107206a2d990cec992854675e5502057
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1722
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Module, etc., will follow. Notes:
* IDXD is an Intel silicon feature available in future Intel CPUs.
Initial development is being done on a simulator. Once HW is
available and the code fully tested the experimental label will be
lifted. Spec can be found here: https://software.intel.com/en-us/download/intel-data-streaming-accelerator-preliminary-architecture-specification
* The current implementation will only work with VFIO.
* DSA has a number of engines that can be grouped based on application
need such as type of memory being served or QoS. Engines are processing
units and are assigned to groups. Work queues are on device structures
that act as front-end groups for queueing descriptors. Full details on
what is configurable & how will come in later doc patches.
* There is a finite number of work queue slots that are divided amongst
the number of desired work queues in some fashion (ie evenly).
* SW (outside of the idxd lib) is required to manage flow control, to not
over-run the work queues.This is provided in the accel plug-in module.
The upper layers use public API to manage this.
* Work queue submissions are done with a 64 byte atomic instruction
* The design here creates a set of descriptor rings per channel that match
the size of the work queues. Then, an spdk_bit_array is used to make sure
we don't overrun a queue. If there are not slots available, the operation
is put on a linked list to be retried later from the poller.
* As we need to support any number of channels (we can't limit ourselves
to the number of work queues) we need to dynamically size/resize our
per channel descriptor rings based on the number of current channels. This
is done from upper layers via public API into the lib.
* As channels are created, the total number of work queue slots is divided
across the channels evenly. Same thing when they are destroyed, remaining
channels with see the ring sizes increase. This is done from upper layers
via public API into the lib.
* The sim has 64 total work queue entries (WQE) that get dolled out to the
work queues (WQ) evenly.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I899bbeda3cef3db05bea4197b8757e89dddb579d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1809
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This makes more sense within the context of the nvme driver and
helps us avoid the awkward situation of getting a failed_qp callback
on a qpair that simply hasn't been connected.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ibac83c87c514ddcf7bd360af10fab462ae011112
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1734
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This allows us to hide the implementations of
g_subsystems and s_subsystems_deps within the
libraries themselves.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I60716b9465b58d6cdb3a43262a7ded844bd80eda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1786
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is part of a larger effort to remove the g_subsystems and
g_subsystems_deps variables from the spdk_event map file. The
implementation of those variables should be internal to the
library.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I3c2c04933859c6c484a903e666df10f810b26709
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1785
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since the related feature is already contained in
spdk_sock_listen and spdk_sock_connect functions,
we no longer need this function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1eafff0d139fa266a355fbee2bf0fc3947db69fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1876
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When iterating SGL segment, we can use existing virt_addr parameter
to return UINT64_MAX as a special value to indicate this segment need
to be described as Bit Bucket SGL.
Currently only READ command is supported, we can enable the WRITE
and COMPARE support when necessary.
Change-Id: I50aa2b226ec3449c13ed1d97b3224ee8e7de95a8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1467
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Separate these two operations into different functions. It is
possible that a CMB may not be visible from the CPU, but still
be present and have data transferred to it by some other DMA
engine. Generalize the API to handle that case.
Change-Id: Ifcd282af0db734fe4a6ef2283ae8e8933d017809
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/787
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of creating an allocator where the driver manages the space,
now, since using the CMB for queues and data has already been
disallowed, just create functions to map and unmap the entire CMB.
The user can manage the space.
Change-Id: I023994deda3b517e14d2ba464c7375bf22b58456
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/785
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Update vhost blk contruct rpc, make it enable to
support packed ring feature.
Change-Id: Ia1f75e72e8441e8d82fad89073e4875f89e5b9cd
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1567
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove unused io_device_delete_count field
Reorganize the fields so that ones used in the data path are
located in the beggining of the structure and occupy 2 cache lines
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I98e22dacb84153e6a10a6ff6d77c1c9dfb14e02b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1803
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently run count of poller has been incremented per execution.
It will be helpful for us to know how poller is busy by adding busy
count which is incremented only when some work is done.
spdk_thread_poll() has used the same timestamp in it, and so this is
the maximum we can do for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0adfbf9a62c959499978124ecc97d377c96c3769
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Set 5 seconds timeout to wait until exiting thread is exited into
spdk_thread_poll(). After the timeout, collect error log and then
move the thread to exited forcefully.
Add necessary unit test case accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ied8f58a2023a3bbe098530810fd3288bef93c3e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1644
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
