As a part of cleanup they're replaced by a device-agnostic
attach API, which is easier for us to manage.
Change-Id: I2ec68f20ba209f02ee5c2de4b6fe5330a4bc0853
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/436480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DPDK 18.11+ does its best to ensure all devices are
equally attached or detached in all processes within
a shared memory group. For SPDK it means that if
a device is hotplugged in the primary, then DPDK will
automatically send an IPC hotplug request to all other
processes. Those other processes may not have the same
SPDK PCI driver registered and may fail to attach the
device. DPDK will send back the failure status and the
primary process will also fail to hotplug its device.
To prevent that, we need to pre-register the pci
drivers on env init.
We register the drivers just after the EAL init
because we don't want the matching devices to be picked
up by the initial bus probe in DPDK. That's for 2 reasons:
1) we don't want to attach *all* available devices
2) devices attached from non-SPDK context (that is,
outside of the spdk attach or enumerate functions)
will still fail to attach - the entire attaching
process will only take significant amount of time
and will bloat the log with useless status messages
Change-Id: I7b4c3a2e355f98ea755649f789137f5a727bc935
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/434415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Although the struct is used as an enumeration context,
it really is a pci driver. The subsuequent patch introduces
a few functions around the pci driver, so rename the struct
to make it align nicely with those functions.
Change-Id: I919c30e55d9f42d795ecd8e20e5d29f3918c17a5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/434414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Now that even DPDK 16.11 (LTS) reaches its end of life in
November 2018, we can surely drop support for DPDK
versions older than that.
The PCI code will go through a major refactor soon, so this
patch cleans it up first.
Since this is the very first SPDK patch that drops support
for older DPDK versions, it also introduces an #error
directive that'll directly fail the build if the used DPDK
lib is too old.
Change-Id: I9bae30c98826c75cc91cda498e47e46979a08ed1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/433865
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Despite the scary commit title, this patch just unifies
per-driver mutexes into a single pci mutex.
On each hotplug we modify some DPDK global resources,
which per-driver locks aren't sufficient for. If
multiple threads try to attach devices at the same time,
then we'll likely have a data race. DPDK hotplug APIs
don't provide any kind of thread safety on their own.
Change-Id: I89cca9fea04ecf576ec5854c662bae1d3712b3fb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/433864
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We used to support it by default in our DPDK forks,
but starting with DPDK 18.08, a new PCI driver flag
RTE_PCI_DRV_WC_ACTIVATE is required.
We enable now it for NVMe and Virtio, but not for I/OAT,
as our I/OAT driver currently assumes strong memory
ordering, which prefetchable resources do not provide.
Change-Id: I1a13356e28535981153b3d3e52bfe9d66b6172af
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/422239
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Briefly tested with SPDK target via bdevio
through both vhost-user and QEMU's virtio-pci.
vhost-blk driver is not mentioned in any doc yet.
A virtio-blk bdev can be created as following:
`construct_virtio_user_blk_bdev /tmp/virtio.0 MyVirtioBlk0 --vq-count 16`
`construct_virtio_pci_blk_bdev 0000:01:00.0 MyVirtioBlk1`
or
```
[VirtioUser0]
Path /tmp/vhost.0
Type Blk
Queues 16
[VirtioPci]
Enable Yes
```
If `Type` field is not present, the VirtioUser
section will be parsed as a SCSI one, preserving
backward compatibility.
Change-Id: I3eae9f3b90570fbb0177df4951e5eed86fe07c66
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/393056
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch only adds the pci_virtio.c file,
without changing any functionality. This
is required for future rte_virtio migration
to SPDK.
Change-Id: I7774cdfdaf8934fde588e25b5db5dd86a9cbfb3f
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379484
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
