For MODE_SELECT request we didn't verify the parameter
list length field from CDB and could complete an invalid
I/O without reporting any error. Fix it by adding an
additional check. Just to clarify: the I/O did not do
any harm, we just completed it with success while we
should have completed it with some error status.
Change-Id: I473e321da37259ee6318ca7dadab2726851d2b68
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function didn't do anything.
Change-Id: Id44a7d0c129ab60751eda382911935d677730ec9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch uses the change by the last patch to initialize DIF
context in SCSI layer. Besides this patch changes the name of a
parameter from offset to data_offset to clarify the meaning.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I54bf1168ec5959432aa15dae0360c0640138b033
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Data offset are intended to correspond to DATAO in NVMe/TCP and
Buffer Offset in iSCSI.
Previously for iSCSI, buffer offset had been merged to start block
address, but passing buffer offset separately from start block address
clarifies the logic more.
On the other hand, for NVMe/TCP, passing DATAO separately from start
block address will be critically important because DATAO will bave any
alignment and will be necessary to use for not only reference tag
but also guard computation.
This patch adds data_offset to struct spdk_dif_ctx and adds it to the
parameters of spdk_dif_ctx_init(). ref_tag_offset is also added to struct
spdk_dif_ctx and it is computed by dividing data_offset by data_block_size
and is used to compute reference tag.
The next patch will use this change when getting DIF context in SCSI.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0e12ca9b1dc75d0589787520feb0c2ee0f844a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To establish a persistent reservation the application client shall first
register an I_T nexus with the device server. An application client registers
with a logical unit by issuing a PERSISTENT RESERVE OUT command with REGISTER
service action or REGISTER AND IGNORE EXISTING KEY service action.
Specify Initiator Ports (SPEC_I_PT) bit and All Target Ports (ALL_TG_PT) bit
are not supported for now, the registrants belong to the I_T nexus who sends
the command.
Also Activate Persist Through Power Loss (APTPL) bit will be supported in
following patches.
Change-Id: If057a764a4bfa73017f98048c94b697dbfa4b4a1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436088
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_malloc() is not required here, as the buffer
is neither DMA-able nor shared between processes.
The buffer is used to store the scsi response as it's
prepared. At the end it's always memcopied to possibly
multiple DMA-able buffers in the scatter-gatter list
provided by the upper layer.
Change-Id: I92fcede67dc24c532b13399f6364b071b2aeeb56
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This case was zeroing the entire structure - overwriting
the peripheral and page_code data already set. Don't
bother zeroing the alloc_len either - we'll set that
later in this case statement.
Fixes issue #750.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b7c6f954b5e3c85ddfaf801d64dd4a501f50cd2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450922
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SPDK iSCSI target didn't convert LUN ID from integer to structure
when it sends R2T PDUs. The next patch will fix the issue. Introducing
helper functions into SCSI library and using them will be clean. Hence
this patch adds two helper functions to convert LUN ID between structure
and integer.
The logic of helper functions is derived simply from the current
implementation in SPDK.
Change-Id: I114b546cfcb44109d6cd131a1fa972f4d6bfea38
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds an API spdk_scsi_bdev_get_dif_ctx().
spdk_scsi_bdev_get_dif_ctx() decodes opcode in CDB, and if opcode
is read or write block commands, it gets LBA and use the lower
32bits of LBA as Reference Tag. It gets DIF information from
specified bdev next. Then it sets all to DIF context and return.
spdk_scsi_bdev_get_dif_ctx() is exported to iSCSI through
spdk_scsi_lun_get_dif_ctx().
Change-Id: Id8aac164c48e9e9d4ff7cfc9fa81bb5090f3e187
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446224
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
SPDK iSCSI and SCSI target don't expose any metadata and DIF settings
to the corresponding iSCSI and SCSI initiator.
Even when SPDK iSCSI and SCSI target allocate any bdev formatted
with DIF, SCSI commands sent from iSCSI and SCSI initiator don't
have any metadata and DIF information.
For that case, iSCSI target inserts and strips DIF on behalf of
iSCSI and SCSI initiator.
Hence SPDK SCSI target has to use data block size not including
metadata to process SCSI commands correctly.
This patch replaces spdk_bdev_get_block_size by
spdk_bdev_get_data_block_size in necessary places.
Change-Id: I264c8e532d1d1b016f6d8774c8ec03389528044f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In this patch series, spdk_bdev_scsi_read and spdk_bdev_scsi_write
became almost identical. Hence squash them into spdk_bdev_scsi_read_write.
Change-Id: Ibbaddf74c1bf2dac37a0133eac27086af650a061
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is in a effort to consolidate SCSI read and write I/O
for the upcoming transparent DIF support.
Previously conversion of bytes and blocks are done both in
SCSI layer and BDEV layer. After the patch series, conversion is
consolidated into SCSI layer.
Change-Id: Ib964a41ec22757f2a09cea22f398903f78d0781f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is in a effort to consolidate SCSI read and write I/O
for the upcoming transparent DIF support.
Previously conversion of bytes and blocks are done both in
SCSI layer and BDEV layer. After the patch series, conversion is
consolidated into SCSI layer.
About conversion from bytes to blocks, we don't expose bdev API
spdk_bdev_bytes_to_blocks and but create private helper function
_bytes_to_blocks because we will use not block size but data
block size when we support transparent DIF feature.
Change-Id: I37169c673479c92e027e2507a0e54a1e414b43e1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444778
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The last parameter xfer_len of spdk_bdev_scsi_read is not used,
and of spdk_bdev_scsi_write is used only to check task->transfer_len.
Hence remove the last parameter xfer_len from spdk_bdev_scsi_read/write
and extract the check operation from spdk_bdev_scsi_write and insert
it into spdk_bdev_scsi_read_write.
Additionally, remove a debug log because xfer_len is not passed to
spdk_bdev_scsi_write anymore. Hopufully, this will not degrade any
maintainability.
On top of this, factoring out the operation to convert byte to
block in spdk_bdev_scsi_read/write be done.
Change-Id: I35faca269a9c4a7f15d27e8e61b6a1b809a36b3f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444776
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
It is perfectly valid for a bdev to not support the
unmap command - there's no need to print an ERRLOG
when a SCSI INQUIRY 0xB2 (LOGICAL BLOCK PROVISIONING)
command is sent to query if the LUN supports it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I18389df4d55a1ac186707d624ddea292a5470e80
Reviewed-on: https://review.gerrithub.io/c/442104
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Current SPDK SCSI supports only LUN RESET in task management function.
Upcoming patches will support other functions too but differentiate
the callback function about LUN reset from other task management
functions for now to avoid misunderstanding.
Change-Id: If8f00ce413fbcc54b12dd885cbf01597f83a2af9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434763
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Althrough it has very small chance to be executed, it's nice
to have it fixed.
Change-Id: I899681ccc13ed59c7fdd343ef7791df4e69e490f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/433976
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
New function was added in bdev layer to allow
handling spdk_bdev_io buffer exhaustion.
This patch adds that functionality to scsi bdev.
Change-Id: Ia6a5be871ae09a4d1166991925f0a44f3b355bdd
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417032
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SCSI reset function return code is not used,
so there is no need for it to have return code.
Change-Id: Ib647109c75b1546675d2601fa00004e1ef186024
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/418615
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously when IO was sent to bdev, even without callback yet,
status for task was set to SPDK_SCSI_STATUS_GOOD.
This patch changes it so that it is only set when callback actually
comesback from bdev via spdk_bdev_io_get_scsi_status().
Change-Id: I4a36ec345608257123e1036d31540f5f1090a23b
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/417708
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This will become the public interface for implementing
bdev modules. Right now the file exposes too much of
the guts of the bdev layer to modules, so it needs
to be stripped down.
Change-Id: Ie8b8c3271d51fdb8d0c24a80244b3f3e510c8790
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/412297
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Instead of silently truncating overly-long SCSI dev names, add an
explicit check and return an error if the name is too long.
Since we now calculate the length of name up front, this also allows
simplification of the copy into dev->name.
This also ensures that dev->name will always be zero-terminated, so we
can simplify the strnlen() in spdk_bdev_scsi_pad_scsi_name() to a
strlen() and remove the invalid unit test case for padding names longer
than SPDK_SCSI_DEV_MAX_NAME.
Change-Id: I54de00bac062a142a10c41cfa2aec19d7969dff0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/406990
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This fixes a false positive warning when building on GCC 7.2.1 with
CONFIG_COVERAGE=y.
bdlen is always initialized on the path where it can be used, but the
compiler seems to get confused when coverage is enabled, so zero out the
value at the top of the function.
Change-Id: Ifc13abff80124cad3d26286ffebf84f967141d13
Reported-by: John Meneghini <johnm@netapp.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/396244
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Retrieve LUN data directly from struct spdk_scsi_lun rather than copying
them into struct spdk_scsi_task, and access the LUN via the task->lun
pointer.
Change-Id: Id8745f116bc559fb2f9e58811c2b9781c8cbdae8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393709
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The normal execution path for read/write commands is that none of the
checks fail; annotate all of the checks in spdk_bdev_scsi_readwrite()
with spdk_unlikely to encourage the compiler to generate the happy path
as straight-line code and move the error handling out of line.
Change-Id: Id0e606c78f0b99662e5c27e3bfa32535de20aa13
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393700
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
spdk_bdev_scsi_read_write_lba_check() was only called from one spot, and
moving its code directly into the caller makes the code simpler to read
and more consistent, since now all of the sense code setup is directly
in spdk_bdev_scsi_readwrite() rather than being split across two
functions.
No functional change.
Change-Id: Ic6ee21b06c721a949579817f0339a4b047ffb2cc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393699
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Only two comparisons are necessary to ensure the I/O is in range.
Change-Id: I66e93abbf9b25949b3c783a47d26918362f00b93
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393698
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Simplify the logic in spdk_bdev_scsi_read_write_lba_check() to do the
LBA bounds check for both parent tasks and subtasks.
This will allow the parent/subtask relationship to be fully moved to
iSCSI in a follow-up patch.
Change-Id: Ic66466f7d77270c303c94b7002196398a34e4814
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393696
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
it appears that scsi name string designator
format in SPDK is not correct. The name strings
are not null terminated (which causees garbage
to appear in scsi_inq -p 0x83). Further, they
are not padded correctly.
SCSI port name and device name strings must be null
terminated. Further, the length must be a multiple
of 4 bytes, and must be padded with 0s.
See SPC-5 Section 7.7.6.11.
Change-Id: Id7c4ad27e5c3a17ad68e5e466142801c0d03b1f2
Signed-off-by: Karandeep Chahal <devilsgrotto@gmail.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/393027
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Each SCSI task should only report its data_transferred; the
parent/subtask relationship should be handled in iSCSI.
Change-Id: Ibece110fd8cca4e94648942fe6b5e004a4fd8a80
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393212
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use spdk_bdev_unmap_blocks() in place of spdk_bdev_unmap(), since the
SCSI UNMAP descriptor already natively operates in blocks rather than
bytes.
Change-Id: I16a0c38d203cf5f60484229e7872783b11d8de6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393202
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Use spdk_bdev_flush_blocks() in place of spdk_bdev_flush(), since the
SCSI SYNCHRONIZE CACHE command already natively operates in blocks
rather than bytes.
Change-Id: I11810948fb8d0b6b911d48620e2a363f767cc7f7
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/393201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Require braces around all conditional statements, e.g.:
if (cond)
statement();
becomes:
if (cond) {
statement();
}
This is the style used through most of the SPDK code, but several
exceptions crept in over time. Add the astyle option to make sure we
are consistent.
Change-Id: I5a71980147fe8dfb471ff42e8bc06db2124a1a7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390914
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Disambiguate the log components from the trace functionality
(include/spdk/trace.h).
The internal spdk_trace_flag structure and related functions will be
renamed in a later commit - this is just a find and replace on
SPDK_TRACE_* and SPDK_LOG_REGISTER_TRACE_FLAG().
Change-Id: I617bd5a9fbe35ffb44ae6020b292658c094a0ad6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376421
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is necessary to avoid failing very large write_zeroes operations.
This is the minimal workaround to get the current bdevio tests to pass -
the real fix will be implemented in the bdev layer later.
Change-Id: I4e49f1b4da5d4c7f9507757d6c71ba3880d22437
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/383306
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The SCSI spec defines two separate fields within the first byte of
the Inquiry data. Define them as bitfields and add enum values for the
peripheral qualifier field.
Change-Id: Ibbb158338da199fc1b67b04c52ec91633577c571
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382713
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Current implementation supports only adding port to scsi_dev.
This change is required to support dynamic remapping of portals.
Change-Id: Idce49aeae43c8861ebe2807df853694f7bacf884
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379931
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Replace SPDK_TRACE_DEBUG with component-specific flags.
Change-Id: Iee7eafab5e6ac8713f247323a18552b5afb0e86a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375834
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This matches the name to the behavior and prepares for addition of a new
log macro for "info" log level.
Change-Id: I94ccd49face4309d3368e399528776ab140748c4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/375833
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The SCSI spec says that zero transfer length shouldn't be considered an
error.
Change-Id: I98958cc393e0e487e25fdbb0eb7fc8126aff9945
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/374320
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We report SPDK_WORK_BLOCK_SIZE (1 MiB) as the Maximum Transfer Length in
the Block Limits VPD. The initiator should not submit a request larger
than this; if it does, fail the request.
Change-Id: I39575cdca4555ac1f78e055a48569be3f47e4781
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/373162
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
None of these make sense as global parameters - they're
all only configurable per-disk. This is a large simplification
and removes the SCSI library's dependency on the config
file entirely.
Change-Id: I1236158a23fa49e437938c51022b13772e404561
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/371598
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is far simpler, although it does limit the bdev
layer to unmapped just one range per command. In practice,
all of our code reports limits of just one range per command
anyway.
Change-Id: I99247ab349fe85b9925769e965833b06708d0d70
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/370382
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
