Also made on the prints a DEBUG message instead and noticed the really
name that was being registered by this component so updated it to
make it look like the rest of SPDK.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I747a846cb365e7db49be50db941e83fb1b265ea0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460244
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When we create a base bdev and then create a split vbdev on top of
the base bdev, if we delete the base bdev first, we have no way to
remove the configuration of the split vbdev. Hence even if we
create a base bdev again, we cannot create any split vbdev on top
of the base bdev again.
The meaning of flag, `removed` of `struct spdk_vbdev_split_config`
is not clear and there will be no issue even if the flag `removed`.
Hence remove the flag `removed` in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I053c95e647721004cecfe4fd8b0f1ff5bb9bf38a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When we run out of bdev_io's child iovs and we had
to round down I/O size to nearest block size boundary,
we used to decrease the existing child_iovcnt and
set a new "child_iov_run_out" flag to terminate the
uppermost splitting loop.
We can get rid of that new flag by just not decreasing
child_iovcnt when rewinding the last few iovs - it
will make the uppermost loop naturally terminate using
the existing checks.
Change-Id: Ie40c7ce135e7fb8fe284afdf7beeebd10af85cb7
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459911
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Compilation Warning on fedora30.
In file included from bdev_raid_ut.c:38:
spdk/lib/bdev/raid/bdev_raid.c:325:11: warning:
Use of memory after it is freed. raid_ch->base_channel[pd_idx],
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is related to issue #822.
Change-Id: I6432772fb38ca02bc4f0a02a36ed3fe61b8607c7
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460069
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I6fd1106c2278c2ef8899c822e920252f62266547
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459550
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Changed initialization of the ftl lib when using an rpc call to
allow for usage of any default configuration parameters (currently
only allow_open_bands is exposed).
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I73457dfcacc6b1adeffd13ecc6e98001749e00cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459741
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Here is the an example to describe existing issue:
There is a Write request with 64KiB data length, and this IO is cross the IO
boundary. We assume that the parent IO will have 2 children requests, one is
33KiB length, the other one is 31KiB. Here is the view of parent iovs, the
first 33KiB length data has 33 iovs:
iov.[0].iov_length = 1024;
.
.
iov.[31].iov_length = 256;
iov.[32].iov_length = 768;
.
.
iov.[64].iov_length = 1024;
In function _spdk_bdev_io_split(), then you can see that for the 33KiB length
child request, exiting code will run out of child child_iov space and return
error due to last one data buffer is not block size aligned.
Here we can rewind the existing offset to last block size aligned buffer to
avoid the error case, for backend which need aligned data buffer such as
AIO backend, the request will go through spdk_bdev_io_get_buf() again to
do the data copy, otherwise for those backend devices such as NVMe with
hardware SGL support, 256 data segment is fine for them.
Change-Id: I96ebdf29829d86f9b38fab28a7406eedc9fa44ef
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
By default QAT will be selected if available however a new RPC
can be used to either auto-select (default) or specify either
ISAL or QAT.
Change-Id: I37cf7640bbd8cef455583e1eccb8adb59cc419d8
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456693
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There is one existing example usage case to describe the issue:
Users(e.g. Vhost-blk target with Windows Guest) call spdk_bdev_readv_blocks()
to submit a 128KiB length data READ request, and the data buffer
provides by vhost isn't aligned, but the backend block device
requires aligned data buffer, so existing function call trace:
spdk_bdev_readv_blocks()-->
spdk_bdev_io_submit()-->
spdk_bdev_io_get_buf()
spdk_bdev_io_get_buf() will allocate buffer from large data
buffer pool for 128KiB length, of course, it will return error
with existing logic.
So here, no matter what the data length is, we can go through
the split process first for both READ and WRITE.
However, there is one scenario that for iSCSI READ request,
the iSCSI layer will not allocate data buffer for the request,
so for this case if the IO boundary is required we should keep
the logic as before.
Change-Id: I67661f5fa4c3c7c561b45c86146759aa3477adbf
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453133
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The next patch in this series introduces and RPC that makes the
selection more flexible.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I55617d3c37b51cf9474c358cb92f5218397c0c58
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There were some TODO items in here that were incorrect if using
an underlying block device that had a 4K block size. The values
here will set the compress vol LBA size to match that of the
underlying lvol but the backing IO unit size, the min size that
reduce will use to perform backing device IO is set to 4K as
smaller than this makes little sense given chunk size is currently
at 16K.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic6a9421a25d947ae7d4dce190d6599eec1d4a05a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458703
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Module only supports shareable transforms, also adjusted the number
to what we need, just 2.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ieb77b5f1221878ac7a4be5176ed459d5165f8430
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458698
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If bdev is configured to use separate buffers for metadata transfer,
but it doesn't support the write zeroes command, pass empty zeroed
buffer to make sure the metadata is cleared out as well.
Change-Id: If6f024266067e5764a28a276296f651d31da4792
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The function spdk_bdev_desc_get_bdev() was added,
but remained unused. Couple places done the exact same thing,
so now they just use it directly.
Change-Id: I018f57b7b4bcfe22ec6a97cf5261b9a257ba93de
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456957
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Allow requests using separate buffer for metadata IO if base bdev
supports it. Copy base bdev's metadata configuration (separate /
interleaved, size, DIF type and location).
Change-Id: I89996f89cad805e696cacf0bba486b4cc1f617e6
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458407
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Starting with this patch it is possible to remove a
snapshot if there is only a one clone created from it.
In such case snapshot can be removed without any data
copying. This is achieved with following steps (case
with only one clone):
1. Open snapshot (Snapshot1) that shall be removed
2. Check if the Snapshot1 has no more than 1 clone (Clone1)
3. Remove Clone1 entry from Snapshot1
4. If the Snapshot1 has a parent snapshot (Snapshot2):
4a. Add Clone1 entry to the Snapshot2 clones list
4b. Remove Snapshot1 entry from Snapshot2 clones list
5. Open Clone1 blob
6. Freeze I/O operations on Clone1
7. Temporarily override md_ro flag for Snapshot1 and Clone1
for MD modification
8. Merge Snapshot1 and Clone1 clusters maps into Clone1
clusters map
9a. If Snapshot2 is present switch parent ID and backing
bs_dev on Clone1
9b. If Snapshot2 is not present set parent ID to
SPDK_BLOBID_INVALID and backing bs_dev to zeroes_dev
10. Sync MD on Clone1
11. Sync MD on Snapshot1
12. Restore MD flags for Clone1 and Snapshot1
13. Unfreeze I/O on Clone1
14. Close Clone1 blob
15. Remove Snapshot1
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I800724b981af894e01e1912d0077c5b34a2ae634
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
_spdk_bdev_io_split() will be used to requests that have IO buffers.
Change-Id: I5ba0b83e47b84066e6c5032de2e02404155896d3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Data offset are intended to correspond to DATAO in NVMe/TCP and
Buffer Offset in iSCSI.
Previously for iSCSI, buffer offset had been merged to start block
address, but passing buffer offset separately from start block address
clarifies the logic more.
On the other hand, for NVMe/TCP, passing DATAO separately from start
block address will be critically important because DATAO will bave any
alignment and will be necessary to use for not only reference tag
but also guard computation.
This patch adds data_offset to struct spdk_dif_ctx and adds it to the
parameters of spdk_dif_ctx_init(). ref_tag_offset is also added to struct
spdk_dif_ctx and it is computed by dividing data_offset by data_block_size
and is used to compute reference tag.
The next patch will use this change when getting DIF context in SCSI.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0e12ca9b1dc75d0589787520feb0c2ee0f844a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added basic configuration details (transport type and address,
parallel units, cache info) as well as most important OCSSD geometry
data to get_bdevs driver_specific section.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I00c50706bd9203bcef1701be1b7d87e93c10e57f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456790
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We had "./configure --with-uring" , but actually, it wasn't compiled.
we need add uring to Makefile that code will add this.
then we can continue to verify this module.
Change-Id: I8b98825f6795eb9f9e7b4947d1c7c3a44a6f0f64
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Gives the ability to change behavior of restore after dirty shutdown
without recompiling ftl library. User can define if partial recovery
or error should be returned after such a scenario.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I6dda40df7b92d6a377957e4a70a3eab91a6ac4a9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456185
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Improve handling of partial IOs for case when iovcnt == 1.
This case is pretty frqeuent because all data allocated by OCF
have iovcnt == 1 (see ctx->data->alloc() or vbdev_ocf_ctx_data_alloc())
Change-Id: I8d38ca9e9d2bd3e6ce298bf788ce6ed782b56594
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch fixes submission of partial IOs in bottom adapter
Existing check (if offset > 0) was not sufficient to detect partial IOs
because there could be an IO with offset = 0 but length < total size of iovs.
This patch changes the check, but also free operation on completion
because now the old free does not cover all situations when we allocate iovs.
`Partial IOs` are the IOs handled by bottom adapter
which specify only part of the internal iovs vector.
So their length is less that the length of internal iovs vector.
They exist because sometimes parts of single IO from top adapter
need to be sent to different locations.
Also, in general, IOs initiated by OCF (such as cleaner IOs) are represented
as single big iov that is submitted by parts in form of 'Partial IOs'.
Change-Id: I8ae47659fb34904c593a696d74d683a418ac9962
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Implement metadata probe functionality to load cache state
from disk.
During metadata probe, we inspect UUIDs of core devices
and create vbdev configurations based on them.
Then, to start vbdev, we use load path (loadq = true).
After this change persistent metadata is officially supported,
we can save and restore cache state from persistant storage.
WriteBack mode is now safe to use in respect to unexpected shutdowns,
because all information about dirty data is also restored during cache load.
Change-Id: I6cf86aabd68177b88638a68ea6a5b78a1068a4d0
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455417
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch updates submodule and appropriate functions.
Cleaner poller is now registered only when needed.
Change-Id: Ic4ca7ce6f77b71ac12c19462f62ae7cd96c59006
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455408
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
iSCSI application may set the data iovec to NULL for READ requests.
Change-Id: Ic6b73f62f75dc2d927c18219fa1c2cb242f0528e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
DPDK rte_ring_enqueue_bulk() has free_space parameter to return
the amount of space in the ring after enqueue operation has finished.
This parameter can be used to wait when the ring is almost full and
wake up when there is enough space available in the ring.
Hence we add free_space to spdk_ring_enqueue() and spdk_ring_enqueue()
passes it to rte_ring_enqueue_bulk() simply.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9b9d6a5a097cf6dc4b97dfda7442f2c4b0aed4d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The function spdk_bdev_io_get_io_channel() was added,
but remained unused. Couple places done the exact same thing,
so now they just use it directly.
Change-Id: Ifa332ce3a489256ccf2f5d0dd9c74a3215c544ce
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The function spdk_bdev_io_get_thread() was added,
but remained unused. Couple places done the exact same thing,
so now they just use it directly.
Change-Id: Ia25abf57eb88c8df47c83e4edd761a9e02cc1618
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456436
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Handle IOs with metadata being transferred in a separate buffer if the
device underneath supports it.
Change-Id: I38887a24d2aad51f674a840367b5dcdeda2d5a8b
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds *_with_md family of functions allowing for IO with
metadata being transferred in a separate buffer.
Change-Id: I842d5a00a532cf5d0b0f0738535ea46903674140
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451465
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Existing code in spdk_bdev_write_zeroes_blocks() will call spdk_bdev_free_io()
for the error case, which will cause assertion because the bdev_io isn't
submitted to the backend yet, so we will check the condtion first to
avoid the error case.
Change-Id: If27d78217f709a3315e74c00869d345abd6b9a69
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This module simply sits on another virtual bdev
and adds a simulated average and p99 latency to that drive.
Change-Id: Ie9fc91e27585fd0636cb7dc845cb41744bf24625
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
QAT driver will not load with anything less than 128, may need to
adjust after performance testing.
Change-Id: I4949e6d97e7ed997d14b907dac00cc288dcc331b
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456069
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
mbufs are freed with a single call to the first mbuf in the chain
unless we hit an error before we chain them. So free them correctly
when chained and loop through the array one at a time and free them
that way if not.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I80ebb86bc2147b42db89d24f8e985cacf7d4bceb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455019
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move actual submission code to _spdk_bdev_io_do_submit, used by
both normal submission path and QoS path.
Previous patch(review.gerrithub.io/c/442127) adds the missing
bdev_io->internal.in_submit_request flag to QoS submission path.
But QoS submission path doesn't handle nomem_io yet.
This patch makes QoS submission path handle nomem_io in the same way
as the normal path and extracts actual submission code into do_submit
function, so that further modification of the submission logic will
apply to both paths automatically.
Change-Id: I41fa88d239c3a2bd9783d812826e32e7c887818d
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455252
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Interpret volume->open() options as our vbdev_ocf_base struct.
This is used during metadata probe procedure, when there is no
vbdev configurations created, so we need to pass base structure
as option.
This patch is a prepartion for persistant metadata support,
and it does not change current behavior.
Change-Id: I0b7435df1692d8b3028931c6c9fc50d2d84b2557
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Use OCF per-volume UUID field to serialize bdev names.
This is going to be used during cache load to find out
which bdevs we want to attach.
Note that there is in fact "user_metadata" buffor that is
also stored in cache metadata, but we cannot use it
because its size is limited to 64 bytes.
UUID in OCF terms is not standarized
and is meant to be used to store custom immutable data.
This change preparation for persistent metadata support.
Functionality is not changed. (everything works the same way)
Change-Id: Ia9204fae29106f5b816d93a6771425a223d6c028
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455414
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change shutdown behavior such that now first bdev destruct() call
stops OCF cache instance.
Previusly, cache was stopped when single vbdev was referencing it.
This patch is related to persistent metadata support.
Without this change, every time a SPDK application is stopped,
only the last core is remembered in metadata,
because vbdevs detach by 1 by 1, each time updating the metadata.
Change-Id: I57db3f77db525177c024ee85e660a85aff2f8c31
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Fix instance function for OCF ctx interface.
This function is used for persistent metadata only.
Change-Id: I9583ea8eb21f07a3e9072a9552bed1c077cb7114
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Make init_vbdev() accept NULL as cache_mode if loadq flag
is set.
This is needed for load path because we don't know cache mode
before the actual load (happens later).
This change is related to persistant metadata support.
This patch does not change current behavior because loadq flag
is always false.
Change-Id: I42727eb841d87903c81bd5e6d51b6d4869ed9be3
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455411
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Implement load path for OCF cache.
During load OCF will read metadata from cache disk and restore its state.
management_channel initialization is moved before cache load/attach part
because ocf_mngt_cache_load() needs it to read metadata.
This patch is a preparation for persistant metadata support.
Load path is never used yet because loadq flag is always false.
Change-Id: Iff6c1c52eae7b9f52812a8bd3d5ae6d6facedd60
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455410
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add new loadq flag that indicates if vbdev
should load cache instance from disk or start a new one.
This change is a preparation for persistent metadata support.
Functionality is not changed in this patch as the loadq flag is always false.
Change-Id: I1baac7f988e6eeadb4f365ba7bfab8019d55a753
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455409
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
