Separate PDU header and payload handling for Login Request PDU.
This will clarify the header handling and payload handling.
Especially store the allocated and initialized response PDU to
the current connection and refer it later. This idea is as same as
iSCSI task and will work because login processing is synchronous
and only once per connection.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7e0eb413ee5f759724a685b83a742515a3546780
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471472
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add PDU receive state to each connection, and each connection
transits among states during receiving incoming PDUs.
Four states, AWAIT_PDU_READY, AWAIT_PDU_HDR, AWAIT_PDU_PAYLOAD,
and ERROR are same as SPDK NVMe-TCP target.
Move clearing conn->pdu_in_progress just before putting pdu
when PDU processing completes normally to match with error case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id24b6d6662896b5685125a46ee20cbf216668838
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469966
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Request logout to the initiator asynchronously when exiting the
running connection from the target.
Based on this patch, the next patch will make flushing PDUs possible
only when the connection is RUNNING (or INVALID) and remove the
tight loop in iscsi_conn_flush_pdus().
Set timeout of logout request as 30 seconds. 30 seconds is as same as
NOP timeout and will be reasonable for now.
Add and use logout_request_timer to check the timeout.
When the connection gets internal a logout request, move the connection
to EXITING state if the connection is in INVALID state, request logout
to initiator and start 30 seconds timer if the connection is in RUNNING
state and logout is not requested yet, or do nothing otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I43192be9fd7112ad444152c0dd88f99a14aa8d30
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The connection state is mainly for flushing PDUs. ISCSI_CONN_STATE_LOGGED_OUT
was as same as ISCSI_CONN_STATE_RUNNING for this point.
Replace ISCSI_CONN_STATE_LOGGED_OUT state by a is_logged_out flag
and use the latter to reject any incoming PDU after sending logout
response.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3426a3ecbd241db402b1a2f7b3914a18e3591591
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470703
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is a preparation to support per portal group CHAP authentication
for discovery session.
Previously require_chap, disable_chap, and mutual_chap had been set
and used in iscsi_negotiate_param(), and chap_group had been set
and used in iscsi_get_authinfo().
If a connection is in a discovery session, the connection can get
all CHAP params at its creation, spdk_iscsi_conn_construct().
If a connection is in a normal session, the connection can get all
CHAP params in iscsi_op_login_negotiate_chap_param().
Each connection is in either discovery session or normal session.
So the following change is possible and is done in this patch.
spdk_iscsi_conn_construct() sets all CHAP params of the connection
by global parameters. Then iscsi_op_login_negotiate_chap_param()
overwrites them by the corresponding target's parameters.
iscsi_negotiate_chap_param() and iscsi_get_authinfo() just refer
the CHAP params.
Besides, iscsi_get_authinfo() changed to call just
spdk_iscsi_chap_get_authinfo() inside, and so inline
spdk_iscsi_chap_get_authinfo() into iscsi_auth_params() and then
remove iscsi_get_authinfo().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8028673cc6923e1b8bc20af55e0c3cc933972fc0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469218
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibcd631bf318ef6ece4ac337219652323ca5fd8f1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464136
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out writing connection information to JSON context into
a helper function spdk_iscsi_conn_info_json.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3e92bcb4f21cc7a36af182f850c944b8c5dd559f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463568
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch binds poll groups to SPDK thread through IO channel and
assigns connections to poll groups instead of cores.
iSCSI subsystem registers iSCSI global object as an IO device, and create
poll groups as context of IO channels of the IO device.
Each portal get and hold portal group on which the corresponding acceptor is
running.
When a connection is constructed, iSCSI subsystem assigns a poll group
to the connection by getting it from the corresponding portal.
When a connection enters full-feature phase, iSCSI subsystem schedules
the connection to a poll group by round-robin.
Then, each connection can know its running SPDK thread directly and can
use SPDK message passing infrastructure instead of SPDK event framework.
By this change, iSCSI connections are binded to SPDK thread, and not
binded to processor core anymore.
Some other changes in this patch are
- core ID is removed from the output of get_iscsi_connections RPC. The
upcoming patches will change the RPC to use spdk_for_each_channel and can
access SPDK thread safely, and add SPDK thread ID instead.
- utilize UT multithread framework added by the last patch to test
iSCSI poll groups by UT.
Change-Id: Iec73c778aa413bcabdb63141cc41d4160911ea0e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463359
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Connections will soon be assigned to poll groups, which will be
dynamically moved between CPU cores based on load. It no longer makes
sense to restrict certain portal groups to specific cpu cores in this
model.
Change-Id: Iee983d75febc9797aa60021c5bc0680335e895cd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463358
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
iSCSI is currently being adapted to SPDK's new threading model,
and this parameter doesn't make sense anymore. Remove it for
now until something functionally equivalent is added later.
Change-Id: Ia0e2f5aa81b72d99467c5a900619fbeeb42b2069
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452779
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function is in charge of scheduling new connections
onto cores. It used to be used to dynamically migrate
connections, but we no longer do that.
Change-Id: I2fa04a7dfb43bf9fae7902376ba5ba6d18744469
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452727
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next patch will add the function ponter typedef
spdk_scsi_dev_destruct_cb for SCSI device destruction.
Hence add lun to the names of descriptors and callback for SCSI
LUN for clarification.
This patch doesn't change any behavior.
Change-Id: I73f2bce9129f7a6f16770ab6ed18428b16589108
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450883
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
These change will be used in the next patch.
Change-Id: Ifdb4ccf20049b46e850122a4021cbbe7441e1270
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds spdk_iscsi_conn_readv_data() to read PDU data
from network socket by using spdk_sock_readv().
Additionally, this patch changes the existing spdk_iscsi_conn_read_data()
to call spdk_iscsi_conn_readv_data() by creating a single struct
iovec.
Change-Id: Ied487bb71bd4261ad53c9f3744ae272e65f98d7a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446377
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
CHAP parameters in struct spdk_iscsi_conn had not been changed
even after iSCSI CHAP was refactored and enhanced.
Use names in iSCSI subsystem throughout.
Change-Id: Ic61b0db42adaa406ab48cf3857a4c2859c88690d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/437056
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The following changes are added in this patch:
1. Remove unused TRACE_ISCSI_CONN_ACTIVE and TRACE_ISCSI_CONN_IDLE.
2. TRACE_ISCSI_TASK_EXECUTED is added. This tracepoint can be used
to record TSC for every PDU, especially non-SCSI PDU.
3. TRACE_ISCSI_PDU_COMPLETED is added. This tracepoint is for SCSI PDU.
It will record the TSC which includes the cycles of flushing writebuf.
Change-Id: I277bb2ce57e3cd2fc6fcb25845abdf2c11ed062b
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/425036
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When hot removal of a LUN is started, callback is called for each
iSCSI connection which accesses the LUN. Callback checks all transfer
tasks complete and then close the LUN.
If the connection clears all transfer tasks before getting all responses
to them from the initiator, the initiator continues to retry data write.
Hence the connection have to wait until all transfer tasks complete.
Change-Id: Iad9063673cfedbd78758890d55a4254512e4fca4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reason: If we trigger the spdk_iscsi_conn_migration,
we may face the issue that the io channel of lun
is NULL(which means not allocated). So I think
that if we trigger the migration, we need to
stop the executing the further pdu of this conn
by the current polling group.
Also since the connection is triggered migration,
we should stop execution on the current core, and
let this connection be handled by next round.
Change-Id: I0ab89d79c976f3233890ae25cb7eac98de5e30ac
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/409984
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Also remove the related login and full feature
function
Change-Id: Ia2d0a6617910134c889d1322b53830fe26b9e956
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402486
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch will also re-export spdk_iscsi_conn_destruct
Change-Id: I7d6cbba33294c84398a919d888c8b375e901e09e
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402485
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Put it in the iscsi.c
Change-Id: Ifb2843fb7c78f9ca948eac60704547b8b0635bf0
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/402484
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds a iSCSI poll group for each core,
thus we can poll a group of connections instead of one
by one on each core.
Change-Id: I9cd82c8c0f7f6e7b3ee34034339638199bfca5da
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/399565
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This provides an abstraction layer around TCP
sockets. Previously we just used fd integers, but
we don't want to be tied to integers for alternative
userspace TCP stacks.
Future patches will do more work to enable multiple
implementations of this abstraction. For now, just
get the abstraction in place for POSIX sockets and
make all of the iSCSI changes associated with it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9a825e9e02eb6927c8702d205665c626f57b3771
Reviewed-on: https://review.gerrithub.io/398861
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
This removes PDU flushing from the main connection poller -
all PDU flushing is now done inline when the PDU is completed,
or from the context of the new flush poller.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I703cb451d4b548e7f75892e31a7927b511fb4f55
Reviewed-on: https://review.gerrithub.io/395543
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Fixes github issue #218.
This patch introduces spdk_cpuset object to store and manipulate
the set of individual CPUs. The main objective of this object is
to replace cpumask declared as uint64_t and extend the limitation
of supported CPUs (lcores) above 64 CPUs.
spdk_cpuset is always allocated dynamically and accessed by opaque
pointer, what makes it easier to extend in the future without
breaking API/ABI.
This patch also extends parsing function allowing to set cpumask
using a list of cpus e.g. "[0-4,10,12]" sets mask of 0,1,2,3,4,10,12
as well as hexadecimal string with and without "0x" prefix.
Change-Id: I475c3ba7fab629021a22e03176e57e400dd24a49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/390794
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
To use JSON dump of iSCSI global parameters as configuration file,
at bootup, it must have completeness.
This patch fixes the following:
- DefaultTime2Wait was not contained.
- MinConnectionsPerCore was not contained.
- Converting only 0 to "None" for dump is not efficient.
Change-Id: I740e6938c216c5c62df6ee70b0ceac40fd0cac00
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/396100
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Some upcoming changes will effectively render this moot
anyways by adding an epoll/kqueue descriptor to poll
on in all cases (not just connections that have been
idle for 5ms).
The epoll/kqueue code was just ifdef'd out instead
of removed - some of this code will be useful
and reusable with minimal changes in the upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c354390537e6369cb3c32e78a59c300dec6d098
Reviewed-on: https://review.gerrithub.io/395553
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This function was originally named spdk_iscsi_write_pdu()
in lib/iscsi/iscsi.c. Since this is an operation on a
connection, add "conn" to the name and move it to conn.c.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iaad022907d43788108d5b2660306abcf5e94040d
Reviewed-on: https://review.gerrithub.io/395522
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
When header files include other header files, it can be difficult
to read the chain of relationships. Hence remove obvious nested
header inclusion.
Remove obvious unreferenced header inclusion too.
Change-Id: I13b1c4e107da8c1a93fae4a0e3c3ee273887aab0
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/391363
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A few foundational change to support safe removal of portal.
- global login poller -> login poller per portal
- Caching portal data for active connection
Change-Id: I62f4d90c9ac11a433ad47421b2b0c69bfc3c70b7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379930
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix up all existing spacing errors in comments and add an automated
check for patterns like /*comment*/.
Change-Id: I28f61c93612dc0f8aed66bd509da78e91ea9737e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When we enabled the ERL1 configuation, for the DATAIN task release
process, we will queue the task to the SNACK list firstly, and then
remove the list when got ACK from initiator, but for this part of
logic, the reference count of primary task was not released correctly.
Change-Id: Ic5959cf644c74f676be0b84c5650292dc426b2d8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Enforce exactly one trailing \n, and fix all of the existing cases.
Change-Id: I6218e4700e90aeb647eaee78089530c79993c8c8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The lcore_id field in the get_iscsi_connections RPC was removed in
commit 5d8c94536a7d1d4c1f0ee3349188bf0e7e8c9e74; add a field to
spdk_iscsi_conn to track the lcore so this can be re-added.
Change-Id: I6c9574829466b168880728f4620401987fc7dd3c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This leaves more flexibility for future changes to the poller
representation without requiring API changes (after this one).
It also prevents the user from accidentally using poller fields in a
non-thread-safe way, since they can't be accessed directly anymore.
Change-Id: I7677d5b93668665d29ae39c5e0ba74333ad3f878
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Similar to our NVMf target, this is an iSCSI target that
can interoperate with the Linux and Windows standard iSCSI
initiators.
Change-Id: I6961c5ef99f7b161c396330ed5b543ea29b0ca7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
