There was an edge case in this check where a public symbol
definition was just moved and that movement triggered this
check. Going forward, check the diff for symbols that were
both added and removed in the same patch. This indicates a
symbol that was just moved instead of newly added.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I71bbcd6d6b3e0a2133e77c29f4ec7a4f2b09e3c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2765
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Since rdma-core handles the entire libibverbs suite, and because it
dropped rxe_cfg in favor of iproute2's rdma tool, building librxe is
not needed anymore. That said, the functionality of the rxe_cfg that
our test suites are using is basic and useful enough to be preserved
in a form of a simple Bash script. This can be used to avoid full
overhaul of the code which would need to be adjusted for iproute2's
tooling. In case more complex rdma configuration link-wise is needed,
iproute2 dependency can be added then.
Additionally, some of the nvmf functions have been simplified to make
use of the rxe_cfg port.
The formatting of the status cmd is left compatible with the rxe_cfg.
Change-Id: I594a24b73472a16d51401bcd74fd30c415b24ddb
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This parameter describes the number of admin and IO
qpairs while admin qpair always exists and should not
be configured explicitly.
Introduce a new parameter `max_io_qpairs_per_ctrlr`
which configures the number of IO qpairs.
Internal structure of NVMF transport is not changed,
both RPC parameters configure the same nvmf transport parameter.
Deprecate max_qpairs_per_ctrlr in spdkcli as well
Side change: update dif_insert_or_strip description -
it can be used by TCP and RDMA transports
Config files parsing is not changed since it is deprecated
Fixes#1378
Change-Id: I8403ee6fcf090bb5e86a32e4868fea5924daed23
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2279
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
It was broken since long ago. --enable-log-bt doesn't change
anything. log.c expects SPDK_LOG_BACKTRACE_LVL to be defined
for backtrace to work, but it's not defined anywhere.
Apparently nobody needs this, so remove it.
Change-Id: I2313fd24198b0bf718663f2eafee9b5c6efa0a7f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2194
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Clearlinux after installation has no empty environment variables,
which caused test failtures.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I8e0673a22c1fe3cf93232704bf8950be357a21b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2717
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
It turns out we have a function to compare version numbers.
It additionally handles cases like "3.0.10 > 3.0.9". The
previous code returned false, the new one returns true.
version_lt() actually tests for less or equal, so compare
against 3.1.0 - the real minimum shfmt version we need.
Change-Id: Ibd18c4505e5b81c0073a907f23c3fc034cfbafbe
Suggested-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2574
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously when doing the naming conventions check, we were
checking against master which was causing some weird issues on
patches which weren't rebased. The much simpler check is to just
compare each patch against the previous one.
This method still works to prevent any bad changes from getting
merged, but handles naming issues on a patch by patch basis.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic031ce07ca1c67819b792dc292dcf6c50df5b1a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2733
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Change-Id: Iee7ba04c489ee1192f6fd65c6647c78536440246
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2508
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I3617a08089b11ace54f34ce2f21bd120a9aa05a3
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2507
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie106459d7dbe92e32933dad569b79c348a8f0052
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2506
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iaa29cdb1920ec3283c1fa62dd4fc20d4c58b1340
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2505
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I71b129b3928f1d5881f42ebfd1510a3fb4055cd3
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2504
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib28364c84a46b98c36ea7202412b34231324f226
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If $output_dir is set, putting the shfmt diff there will make it
easier to extract it and/or look it up from the side of the per
patch build.
Change-Id: Iefb601a29f165e59b7670a8878e95bb6b16c9650
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2277
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Explain the bdev_auto_examine parameter of the bdev_set_options rpc.
Add bdev_auto_examine parameter for the bdev_set_options
in the python rpc client.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I268cd5c01129180467967c2ebfffa7c3ba7e5b1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2580
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
pip3 can come for different python releases (3.6, 3.7, etc.) and
depending on which version is installed some maj.min bins may simply
not exist.
Change-Id: Iefc26902161e2e3578d07e99a9e742b132ef11f0
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2565
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test prevents anyone from adding a function that begins with
spdk to the lib or module directories without also adding that file
to the corresponding map file and a header in spdk/include or
spdk_internal/include.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ife7db13d4bb8fec7570c8492ac3326222a850c36
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2423
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All of the other checks simply print OK if the test passes
this check prints out a lot of text (especially when run at the
tip of long patch series) that can make it difficult to tell if
anything is actually wrong.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ie681d200aa13f208e4afa1ab419cbad63ef6606c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2403
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
A newer version of shfmt was released, but the script still
looked explicitly for the older one.
Make it execute the first binary '^shfmt.*' in PATH whose --version
returns at least v3.1.0.
Change-Id: If621abfa4d995a9dc985e6bab8c33aa36c327fae
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2428
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When using vfio a warning for memlock limit is printed.
TARGET_USER is one set by caller when executing the script,
or set to user that called the script (even when using sudo).
Yet ulimit was printed for the one executing the script,
most likely root.
This patch verifies ulimit for a particular TARGET_USER.
Along with more explicit information which user the
information pertains to.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I20ad62109bc316295208e21f959ecfc263307e1c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1964
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds '--plugin <module_name>' parameter
to rpc.py script which is used to provide module
name with additional RPC commands that should be
included in rpc.py script. User must export path
to rpc module with PYTHONPATH before calling rpc.py
with this new parameter.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I971429a33cf4ea943d2b7f3abd5a6cb82398d2a4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2263
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is relevant in context of rpc_cmd() which was introduced with the
following commit:
"scripts/rpc.py: add daemon mode" 8b98cdb64a
When rpc.py runs in a server mode, its stdin is already attached to a
pipe connected to its parent Bash process. In such a setup, it's not
possible to use some of the rpc methods, e.g. load_config().
To make use of said methods possible, allow them to load the config
from different sources - a regular file or a string.
Change-Id: I6fa7d13fa1957b6449ce5d5c5a810bd58d0a5703
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2106
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The -1 is valid value indicating that the node id for given device
has not been specified. Detect it and map it to "unknown".
Change-Id: Id97d9046be0e4d5ff257bca66ae3e73e906253fe
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2229
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use * instead of ? to match all the potential nodes not only those
with a single digit id. The actual node limit is dependent on
kernel's CONFIG_NODES_SHIFT hence in theory, the actual number of
numa nodes may be far greater than 10.
Change-Id: I1d587735b433ed23594725b9d77a44f7cc729494
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2228
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since sysfs is not used by the FreeBSD the following error can be
seen each time gen_nvme.sh is run:
grep: /sys/bus/pci/devices/$bdf/uevent: No such file or directory
Avoid that by looking up the pci address in a way specific to
FreeBSD.
Change-Id: If81e71cece52c2f27dcf68f7a7eba3dd7d8ce10f
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2227
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, store kernel name in the separate var and use it throughout the
entire script.
Change-Id: Iaa1c4c4aa52fb4aa708fb476478a81e9c6067b58
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2340
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will probably be not installed by default in CentOS
installations. If we're going to use "config-manager" then
it requires yum-utils.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I7d310e376430b065742b671d983d11dd87bb5fac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2221
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add new dev tool for enforcing proper formatting of the Bash code
across the entire repo. This is done in order of defining a common
set of good practices to follow when writing .sh|Bash code.
As powerful as shfmt may be, it allows only for some specific rules
to be enforced, hence it still needs to work side by side with
shellcheck syntax-wise. If it comes to style, following rules are
being enforced:
* indent_style = tab - Lines must be indented with tabs. The exception
from this rule is the use of heredocs with
<<BASH redirect operator. Spaces can be used to
format the line only if it's already preceded
with a tab.
* binary_next_line = true - Lines can start with logical operators. E.g:
if [[ -v foo ]] \
&& [[ -v bar ]]; then
...
fi
* switch_case_indent = true - case|esac patterns are indented with tabs.
* space_redirects = true - redirect operators are followed with a space.
E.g: > foo over >foo.
In addition, shfmt will enforce its own Bash-style for different parts
of the code as well. Examples and more details can be found here:
https://github.com/mvdan/sh
Change-Id: I6e5c8d79e6dba9c6471010f3d0f563dd34e62fd6
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1418
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was added before the usage of having a SW engine and 2 HW
engines was fully thought out. The current rules are:
* if no HW engine specific enable RPC is sent, use SW
* if a HW engine specific enable RPC is sent, use it
* If a 2nd HW engine specific enable RPC is sent, ignore
In this scheme there's no need for an RPC that lets the user
choose which engine to use because they already do so when
they enable an engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I006ffb3b417f1e93bb061b29535d157ba66f03b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2033
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With issues similar to https://github.com/spdk/spdk/issues/1293 it
would be better to use temporary directories for spdk workspace
instead of depending on the hardcoded path (/tmp/spdk). This will
mitigate potential scenario where permissions of the target dir
are suddenly changed in-between autobuild runs.
Change-Id: If44a2dcce712a185287186f33e7361223dc6d451
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Main subparser for rpc lists all positional arguments. Like so:
positional arguments:
{framework_start_init,start_subsystem_init,framework_wait_init,....
This again is duplicated with better help message.
This patch just removes this list, leaving the most detailed one.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5e6b9d0dd6ccf68bfe1cd5959ed509032738c037
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2126
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
The main parser will show usaged like so:
usage: rpc.py [-h] [-s SERVER_ADDR] [-p PORT] [-t TIMEOUT] [-v]
[--verbose {DEBUG,INFO,ERROR}] [--dry_run] [--server]
{framework_start_init,start_subsystem_init,............
The above contains very long list of all RPCs.
This is duplicates help from the subparsers, which contain
more descriptive help message.
This patch replaces the usage with:
usage: rpc.py [options]
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ibf400987103f5571f79c57d8a9588d97f463d773
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2125
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Any time script is called an RPC is called and socket
connection is attempted.
This should not be required when no arguments were provided,
such as calling help to explore possible options.
Example of the error:
[tzawadzk@PowerEdgeFour spdk]$ sudo ./scripts/rpc.py
Traceback (most recent call last):
File "/home/tzawadzk/spdk/scripts/rpc/client.py", line 40, in __init__
self.sock.connect(addr)
ConnectionRefusedError: [Errno 111] Connection refused
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "./scripts/rpc.py", line 2438, in <module>
args.client = rpc.client.JSONRPCClient(args.server_addr, args.port, args.timeout, log_level=getattr(logging, args.verbose.upper()))
File "/home/tzawadzk/spdk/scripts/rpc/client.py", line 56, in __init__
"Error details: %s" % (addr, ex))
rpc.client.JSONRPCException: Error while connecting to /var/tmp/spdk.sock
Error details: [Errno 111] Connection refused
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3734e1603fa7151fd53b99b8af4ea79bf82fe0f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2124
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Expose a cache of pci devices in form of an assoc array that could be
looked up during the runtime of a script like setup.sh.
In case of setup.sh, caching speeds up execution quite visibly:
config run, no caching:
real 0m4.488s
user 0m1.440s
sys 0m1.260s
config run, caching in use:
real 0m2.876s
user 0m0.365s
sys 0m0.420s
Note that for initial config runs, binding controllers to proper
drivers is the actual bottleneck.
status run, no caching:
real 0m1.877s
user 0m1.252s
sys 0m0.984s
status run, caching in use:
real 0m0.371s
user 0m0.242s
sys 0m0.204s
reset run, no caching:
real 0m2.559s
user 0m1.409s
sys 0m1.322s
reset run, caching in use:
real 0m0.960s
user 0m0.432s
sys 0m0.419s
Additionally, in case common tools, e.g. lspci, are missing, fallback to
sysfs to pick all needed devices from the pci bus. Targeted for Linux
systems only.
Change-Id: Ib69ef724b9f09eca0cbb9b88f1c363edc1efd5dc
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1845
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is required for SSL verification when running on https.
Added argparse to handle multiple optional arguments.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib8731bafaaf38264ed86ed84ca7eeca5ff4935b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2122
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In create_vhost_vm we export SDPK_VAGRANT_DISTRO
variable to vagrant subprocess that is called
during the script.
But if SPDK_VAGRANT_DISTRO is an array variable,
then Vagrant will not see it
and always default to ubuntu16.
This small patch fixes that.
Change-Id: I45e9ed4f847e4fa10b90650a613f9cfe17ee38e3
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1676
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Purpose: To set the priority of the NVMe-oF connection especially
for TCP connection.
For example, the previous example can be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420
With the change, it could be:
trtype:TCP adrfam:IPv4 traddr:10.67.110.181 trsvcid:4420 priority:2
The priority is optional. We try to change
spdk_nvme_transport_id but not in spdk_nvme_ctrlr_opts since
the opts in spdk_nvme_ctrlr_opts will reflect in every nvme ctrlr,
this is short of flexibility.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Change-Id: I1ba364c714a95f2dbeab2b3fcc832b0222b48a15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1875
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The new RPC also includes and option for which
idxd config is to be used. Config options will be
explained in detail in a later patch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I1322bab4d6ca9cc45ec3a56d7267dc7dc09dbea3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1726
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
