It's useful to determine what's being sent out to the server. This
may be relevant for e.g. openstack tests where currently it's hard
to see what tempest|cinder is actually doing, SPDK-wise, during the
tests.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie32781621317dd65e3f6fbcfd5110e7dac337f04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8489
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In the nightly test, the compiler complains:
trace.c: In function ‘_spdk_trace_record’:
00:07:12.523 trace.c:144:53: error: ‘argval’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
00:07:12.523 memcpy(&buffer->data[offset], (uint8_t *)argval + argoff,
00:07:12.523 ^
00:07:12.523 trace.c:145:36: error: ‘arglen’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
00:07:12.523 spdk_min(curlen, arglen - argoff));
And this patch is provided to fix such issue.
Fixes #issue 2034
Change-Id: I4c78d63bdc6a7d166990ae1d18a6abf183efdee1
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8709
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Chengqiang Meng <chengqiangx.meng@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
There is no point in producing USDT probes in unit tests and it breaks
the build on some systems:
ctrlr_discovery_ut.o(.note.stapsdt+0x14): error: relocation refers to local symbol "" [102], which is defined in a discarded section
ctrlr_discovery_ut.o(.note.stapsdt+0x90): error: relocation refers to local symbol "" [108], which is defined in a discarded section
ctrlr_discovery_ut.o(.note.stapsdt+0xf8): error: relocation refers to local symbol "" [110], which is defined in a discarded section
ctrlr_discovery_ut.o(.note.stapsdt+0x15c): error: relocation refers to local symbol "" [112], which is defined in a discarded section
Fixes issue #2027.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic6dad60df1f7dccb7f99777ebc4435c618cb505a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8699
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If NGUID is not specified with nvmf_subsystem_add_ns json-rpc request
then it is possible to expose the same NGUID as bdev nvme module
attached.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Ie0ed7189e55a5abd6bc0904fc356d26f62b50549
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
NVMe specification defines namespace identification descriptors i.e.
EUI64, NGUID, UUID.
BDEV abstracts NVMe specific details that is why only UUID is exposed,
however if NGUID is supported it is prefered to identify namespace
with NGUID over UUID.
If NGUID is not supported by NVMe Controller then fallback to UUID.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If51889a3664c0daa7cbe983048231793e3c502e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Now that multiple trace entries can be chained together to form a larger
argument buffer, we can reduce the size of a single entry back to 32
bytes, while still allowing the user to pass multiple parameters.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic92a1413498df28a8561a13c0f06d895d0af2cc6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8407
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The trace app has been extended to parse chained entries when printing
arguments that exceed the size of a single trace entry.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib9705fd08da998bea39f14eaa83305a8e9d0d5a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8406
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds the ability to chain multiple trace entries together to
extend the size of the argument buffer. This means that a tracepoint is
no longer limited to the size of a single entry, so it can have any
number of arguments, and their size is also not constrained to a single
entry.
Some limitations are still there: a tracepoint can have up to 5
arguments and strings are limited to 255 bytes. These constraints stem
from the definitions of tracepoint structures, which could be easily
modified to extend the limits if needed.
To record a tracepoint requiring larger buffer, aside from reserving
`spdk_trace_entry` structure, a series of `spdk_trace_entry_buffer`
structures are allocated too. Each of them acts as a buffer for the
arguments. To allow trace tools to treat the buffer structures
similarly to regular entries, they also have the `tpoint_id` and `tsc`
fields. The id is always assigned to `SPDK_TRACE_MAX_TPOINT_ID` to make
sure that a buffer is never mistaken for an entry, while the value of
`tsc` is always shared with the initial entry. This also provides a way
for the trace tools to verify if an entry is part of a chained buffer.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I51ceea6b6e57df95d4b8bd797f04edbc4936c180
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8405
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It makes the code more readable. Additionally, to avoid partial updates
to an entry, the check for the number of arguments was moved before it's
filled in.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9ba01b1bcdc29267571badaebd4a9b34ffd7f728
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8404
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
It allows us to get rid of the `next_circual_entry` variable and will
make it easier to retrieve multiple trace entries, which will be needed
in subsequent patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I4666c9da518c2ac0b376e10aa73d1c58cff91f13
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8403
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Since the trace files can get very large (several GBs), parsing them
using python's json module might require an unfeasible amount of memory,
as it needs to load the whole file first. The ijson [1] library
provides interfaces for parsing files iteratively, only loading a small
portion of a file at a time.
It requires the input JSON to have the tsc_rate and the definitions of
the tracepoints listed before the tracepoint entries. It's not a big
deal, as this is the way `spdk_trace` generates it, but it's worth
noting, as passing that file through something like `jq -S` might make
it unreadable to the trace script.
[1] https://pypi.org/project/ijson
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I03c0c3fb47091da615a3978b8d63edf4d876b811
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8275
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
This patch adds support for annotating qpairs. The raw pointer values
are replaced with a list of various properties of a qpair collected by
the bpftrace script.
A line like this:
`0 2856282624.000 RDMA_REQ_NEW id: r3256 qpair: 0x26ba550`
becomes (the line was only broken here):
`0 2856282502.669 RDMA_REQ_NEW id: r3256 qpair(ptr=0x26ba550, thread=2, qid=0, \
subnqn=nqn.2016-06.io.spdk:cnode1, \
hostnqn=nqn.2014-08.org.nvmexpress:uuid:729783b4ab38485d8d767b7741108a8)`
To annotate a trace, one first needs to enable and record the DTrace
probes:
```
$ scripts/bpf/trace.py --record `pidof spdk_tgt` > bpftraces
^C
```
Of course, the probe events are only recorded when the script is
executing, so in order to generate the annotations properly, it must be
started before the annotated objects are created. For instance, for
NVMeoF, it needs to be running before a connection is made.
After the BPF probes are recored, the traces can be annotated:
```
$ build/bin/spdk_trace -p `pidof spdk_tgt` -s spdk_tgt -j | \
scripts/bpf/trace.py -b bpftraces
```
For now, the script only annotates traces from the rdma module, as it's
the only one with tracpoints recording qpair pointers now, but it could
be extended to support more tracepoints.
Similarly, more objects could be annotated in the future by extending
the `SPDKObject` class and defining additional DTrace probe points.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2225f4b1ab266b41af561b5e7d942411cd0c13c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8107
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch introduces definitions responsible for generating bpftrace
scripts and parsing its output. That output will be used in subsequent
patches to provide annotations for SPDK traces.
The script has a hardcoded set of probe points that are used to generate
the bpftrace script. They're also checked against the probes present in
code to sanitize them and make sure that they're in sync.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1b8c95e1a035bd7affed2c44b056828a5da94abd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8106
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_nvme_ctrlr_free_io_qpair now always returns 0, so
update the code to account for that.
Fixes issue #2012.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I61c78459472573adbfeb28052ae3379d7880567c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8660
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Returning an error from this function is not useful - there
is nothing the caller can do with that information. So
change the return value to void. Also add ERRLOG and assert
if a transport actually returns a non-zero status, to
force the transport implementer (which must be an out-of-tree
transport) to make changes as necessary.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I402afec045265db178af821d25b99a6dbe066eab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8659
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is not uncommon for delete_io_qpair to fail, for
example when a controller is hot removed. So even
if SQ or CQ deletion fails, continue with freeing
resources and report success back up the stack.
There is really nothing the application can do to
account for this failing anyways.
Upcoming patches will add additional checks to
ensure failing delete_io_qpair status never gets
propagated to the caller.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iac007c1eba30f7a8c4936b3ffb6c837f28ee12ae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8658
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fixed warnings produced by gcc-11:
compress_ut.c: In function ‘test_compress_operation’:
compress_ut.c:726:9: warning: ‘_get_mbuf_array’ accessing 32 bytes in a region of size 24 [-Wstringop-overflow=]
726 | _get_mbuf_array(exp_src_mbuf, &g_expected_src_mbufs[0], SPDK_COUNTOF(exp_src_mbuf), false);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compress_ut.c:726:9: note: referencing argument 1 of type ‘struct rte_mbuf **’
compress_ut.c:430:1: note: in a call to function ‘_get_mbuf_array’
430 | _get_mbuf_array(struct rte_mbuf *mbuf_array[UT_MBUFS_PER_OP_BOUND_TEST],
| ^~~~~~~~~~~~~~~
Fixes issue #2013.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I04d0182169e61e87401f93f56993168d7aa42e43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8692
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Due to the recent changes for non block size multiples write I/O,
the data digest feature was degraded. If Linux iSCSI host enables
data digest and tries to detect LU from SPDK iSCSI target, data
mismatch error is detected and the connection is disconnected
unexpectedly.
The cause was that pdu->data_valid_bytes was not set for non-write
response PDUs which have a data segment.
iscsi_pdu_calc_data_digest() has been used only for non-write response
PDUs. Hence we did not need to change iscsi_pdu_calc_data_digest().
Restore the original implementation of iscsi_pdu_calc_data_digest().
Additionally, to avoid future degradation, rename the related
functions to iscsi_pdu_calc_partial_data_digest() and
iscsi_pdu_calc_partial_data_digest_done(), and add comments for
clarification.
This fix was verified by the reporter.
Fixes#2029.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6babcd1b56e79d3fa3cd26b2dfaad87a52788e63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8635
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Currently, crypto job also executes tests from the SPDK_TEST_BLOCKDEV
suite, including spdk_dd tests. The dd tests under a bare-metal system
can take up to 4 minutes alone and that brings the crypto job to the
very edge of timing out.
Since these tests are extensively covered under separate vg jobs we
won't lose any coverage by excluding them from crypto's - the basic
set of SPDK_TEST_BLOCKDEV tests would still remain as part of this
job.
Fixes: #2017
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I877e63de1e43aeb06c134fdacd6f5efbbe2a6317
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Fixes#2022
If queued aborts are present when trying to fail a ctrlr
using spdk_nvme_ctrlr_fail(), then the abort command completion
will attempt to retry one of the queued aborts.
This eventually leads to a segfault that can be avoided by not
retrying any queued aborts.
Change-Id: I897dcb8809e16af8bdd39d4381ab531e1cc29822
Signed-off-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8585
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The vfio-user target emulated NVMe device is treated as
PCIe NVMe SSD in the Guest VM, so when doing controller
reset or shutdown, we should abort the AERs which in the
NVMf library.
Users may switch kernel NVMe driver to SPDK NVMe driver
in the VM, without this fix, we will got "AERL exceeded"
response very frequently, because the AERs submitted by
previous driver will never be aborted in runtime.
Change-Id: I0222ed509629ccb0e98217414dd9043857105686
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8558
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When users remove kernel NVMe driver in the VM, after 120 seconds,
SPDK NVMf target will disconnect ADMIN queue pair due to association
timer timeout, and for vfio-user transport, the ADMIN queue pair
connection is associated with the socket connection, so when probing
the NVMe controller again, because there is no active ADMIN connection
for fabric register R/W commands, it will cause segment fault.
Here we set the association timeout value to 0 for vfio-user transport,
so that the ADMIN connection will not be disconnected when shutdown the
controller, the ADMIN queue pair will be disconnected when the socket
connection breaks.
Change-Id: I3613169229bae384405889653e50f581d30d7c07
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8557
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMf library will set cdw0 based on specific command,
so we use it directly in vfio-user, otherwise, some NVMe
commands such as AER can't work.
Fix issue #2016.
Change-Id: Ie1a80a92c0856b61822ee51ce5d8faaaf1d463de
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8556
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Also fix one incorrect print log.
Change-Id: I3254baf4bbff4acfc0ef43f628d025931e8589ea
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
These macros are only valid for Fabric transports.
Change-Id: Ia456eebdcdab28e81226c1b3a7211fcb41b5e481
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8554
Community-CI: Mellanox Build Bot
Reviewed-by: John Levon <levon@movementarian.org>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_bdev_register() and spdk_bdev_add_alias() had not held mutex when
adding bdev name or alias to global bdev name tree. This bug caused unexpected
error when traversing global bdev name tree.
The next patch will fix the bug. This patch is a preparation for the fix.
spdk_bdev_get_by_name() had not held mutex while traversing bdev
name tree. The major callers to spdk_bdev_get_by_name() had held mutex
when calling it. However, this was not clear.
Factor out the internal of spdk_bdev_get_by_name() into a helper
function bdev_get_by_name() and then change spdk_bdev_get_by_name()
to lock and unlock when calling bdev_get_by_name().
Then replace spdk_bdev_get_by_name() call in spdk_bdev_alias_add() and
bdev_register() by bdev_get_by_name() call.
spdk_bdev_get_by_name() call in spdk_bdev_examine() is not changed.
This is called only from JSON RPC and not related with the bug. So
we want to fix only unlocked access to global bdev name tree.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I25f07694e569eec10dba6c3c8543f6ce77412fe8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8523
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
It is better to not fail connect commands when a subsystem
is not ready. The host will not be expecting that and will
typically treat it as a catastrophic failure (i.e. it won't
retry the connect).
So instead when this situation occurs, start a poller for
the connect request. We will continue to retry processing
it until the subsystem is ready to handle it.
Fixes issue #1985.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8835df8f0edf1e889fdd7e754e261c2a880cbb6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8571
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is possible for a controller to get added to the
subsystem before its admin_qpair has been assigned.
We need to account for that when traversing the subsystem's
ctrlr list when determining ns and ana_changes that need
to be reported for the ctrlr.
Found while doing stress testing with connects and
subsystem ns add/remove.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie54dc6ac202faeaeace054e6599f2dea2f30211e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8570
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If perf is connecting to a subsystem with listeners
of different transport types (e.g. TCP and RDMA) and
the user request a specific trtype via CLI (e.g. TCP),
discovery process will call probe_cb for every transport
type. As result, probe_cb in perf will return `true`
and undesired controllers will be created and used in
IO path.
This patch adds a check for trtype and trstring to ignore
controllers that are not of a requested type.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Id87afd03c7b38edfbbfecb5ad2239fe3e9ac9f83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8465
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
After correct trstring initialization, it is
overwritten with trstring value of the current
probe ctx. That leads to a problem when initiator
connects to a sbusystem with listeners of different
transport types (e.g. TCP and RDMA). If probe_ctx has
TCP type, than discovery probe initialized probe trid
with trtype=RDMA and trstring=TCP. As results, SPDK
creates TCP controller with trtype=RDMA and we hit
assert in nvme_tcp_qpair function.
Change-Id: I9355450c40c58fa55b016220703f6f7ae36b2571
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Pollers are supposed to return SPDK_POLLER_{BUSY,IDLE}.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I92bd184aaba9e3efb730b68a6024ebc9757ffd8b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8559
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
also remove out of support fedora31
Signed-off-by: wawryk <maciejx.wawryk@intel.com>
Change-Id: I2ec224a3fb3849eb62ba46a01aa74c62926174f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8461
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If we continuous setup and teardown cuse session, It will teardown
uninitialized cuse session and cause segment fault, New function
cuse_session_create will do the session create operation and under
g_cuse_mtx to avoid this issue.
Signed-off-by: Weifeng Su <suweifeng1@huawei.com>
Change-Id: I2b32e81c0990ede00eea6d4ed3a7e44d534d4df3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8231
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Without hugepage allocation at runtime this is
no longer required. Additionally CI VMs now
have a lifespan of just 1 test run, so there's
no need to clear the cache anymore.
Saves us a few seconds on every run.
Change-Id: I12cb4095c37bd5d22d3b3fcbce4b5072118d3000
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2375
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: <tomasz.rochumski@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
check if the thread is moved to the main core after it becomes idle.
Change-Id: I3ee38ee16d755cc9dea5fa10d9f8ba42507408ff
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7853
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Use extended regexp to resolve any potential ambiguity with matching
on '('. This should fix the following failure as seen on the CI:
fatal: command line, '^SPDK_RPC_REGISTER\(': Unmatched ( or \(
Also, since errexit doesn't see failures inside the process
substitution make sure we return from the function with a proper $rc
in case git fails early on.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia03095e9cc8cf11602dafb5bef28265abb485704
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8577
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When entering the if case to order the list, there is bug should be
fixed. The original code does not address this.
The way this happens is when there is a connection left in the socks_with_data list
between polls and there are enough new events detected that it would exceed the
maximal number of events. A connection is left on this list between polls if it isn't
fully drained via reads by the upper layer on each poll loop.
Currently, the maximal socket event num is 32. Then we did not hit this issue
in our normal test cases. But when you use NVMe-oF tcp target to test which is
described in #2105, there are more than 32 active sockets, and it exceeeds
the maximal num of events of polling (32), so we will trigger this issue.
Fixes issue #2015
Change-Id: I9384476fdba8826f5fe55a5d2594e3f4ed3832ba
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8541
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Faced the following warnings during the compilation:
accel_perf.c:222:17: warning: ‘argval’ may be used uninitialized in this function [-Wmaybe-uninitialized]
222 | g_crc32c_seed = argval;
And this patch can be used to fix this issue.
Change-Id: I84ee542d629ff5d9e6a2873c0035bea81b376150
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8538
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Chengqiang Meng <chengqiangx.meng@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
when running spdk_tgt -m 0x33,
the core id showed from refresh_cores_tab() is:
core
0
0
4
5
The correct should be:
0
1
4
5
This patch aims to fix this display error.
Change-Id: I2ac49d73de6dcf5bf10891b2299565c19cfaa686
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7856
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
