These had diverged. Make them work the same way again.
Change-Id: Ib6d93a7042584493315fe1e348dc8ede9ab320f0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In parallel make, it was previously possible for sub-directories
to start compiling before mk/cc.mk was checked. This doesn't
really cause a problem, but set up the dependencies to ensure
it is always checked before proceeding with the compilation.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9152095eaebf21e242aa5472f800f036fe8d0751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2554
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If $output_dir is set, putting the shfmt diff there will make it
easier to extract it and/or look it up from the side of the per
patch build.
Change-Id: Iefb601a29f165e59b7670a8878e95bb6b16c9650
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2277
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The UT can test the received aer reqs number and
check if the reqs are continuous.
Change-Id: Ifa1cb9dd4cdae5526fc80fe6c1b504ad9873d0f8
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2549
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add the AER events in nvmf target from one to four.
Change-Id: Ie31988b49d68bdbc28ab2e09c783e681d3017e2b
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2548
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
current_queue_depth should have been incremented only if I/O submission
succeeded.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibdcae2d4e8d5b804faaac2392226252c95dfb634
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2586
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
current_queue_depth should have been incremented only if I/O submission
succeeded.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib26b42b0ab195eba7536b2403a31d42305d77433
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2585
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Explain the bdev_auto_examine parameter of the bdev_set_options rpc.
Add bdev_auto_examine parameter for the bdev_set_options
in the python rpc client.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I268cd5c01129180467967c2ebfffa7c3ba7e5b1a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2580
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This helps ensure thread safety on creation of the
netlink socket, when probe is called from multiple
threads at once. It is also a lot more clean - we just
create it once, rather than checking every time probe
is called to see if it has to be created.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I528cedc3ff44de6ea8ecaf6d2389226502ba408e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2681
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow spdk_nvme_probe and variants to be
called from multiple threads in parallel.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I534db605c9e192b943afe973981b7b503d8b7e34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2680
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
For compatible on different OS, need to using __has_include.
And this can't be simplified.
ncurses file is different on openSUSE.
Fixes issue #1400.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I612e7c37d054da90206499bcdfe8cc06cd8cc360
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2638
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will need to be done separately for poll groups.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0e432493bdb02e13fe5c73a8a09911cef573307b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1664
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This helps create a separation between processing a qpair and processing
a completion queue which can be shared across multiple qpairs.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I111dd16ec4327854f232988a96891a65813f00e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1166
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Warning:
ctx.c: In function ‘vbdev_ocf_ctx_log_printf’:
ctx.c:503:2: warning: ‘spdk_lvl’ may be used uninitialized in this function [-Wmaybe-uninitialized]
503 | spdk_vlog(spdk_lvl, NULL, -1, NULL, fmt, args);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compiling with ocf module, here should add default.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I645a1044e58b63d5a58fde19baa3c125f97e0a7b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2603
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In the case, there are several ctrlr used, it's better to
have the traddr to indicate which ctrlr has the issue to
shutdown.
Change-Id: Ie564bb70566ba5822938efc99125d063f7b4ae4a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2588
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
pip3 can come for different python releases (3.6, 3.7, etc.) and
depending on which version is installed some maj.min bins may simply
not exist.
Change-Id: Iefc26902161e2e3578d07e99a9e742b132ef11f0
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2565
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This reverts commit 79215d80c1ef383f39b714121a71bfe9ca8147c1.
Reason: Find the bugs while using batched. For example, if
we fetch 3 CQEs, A, B, C and put it in a cqes[] array.
Then we leverage io uring cqe seen to handle, Then we handle the
CQE A, then invokes the call back related with A. In A's call back,
it may also call the reap function (sock_uring_group_reap),
then the CQEs will be handled again. Thus the CQEs B and C can be already
handled. Then we will handle B or C again, then it triggers the error.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I67ece3b24e677b88d66d08722b00539693b42e1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2543
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Do not skip if db_bench is not available.
Explicitly fail.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I96b0fde50aedf20654a114a2c28d24bfed478b11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2515
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add simple periodic round robin poll group migration to the example
application to exercise SPDK thread dynamic scheduling.
Add CLI option to enable the feature manually. Default setting is
disabled, and the period is specified as micro second.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4639e94ce00611a600ff068e754ee6f31905565c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2556
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add the flag, resched, to struct nvmf_lw_thread.
Add an new function nvmf_request_spdk_thread_reschedule() to set
the resched flag of the current thread to true.
nvmf_reactor_run() checks the resched flag and call
nvmf_schedule_spdk_thread() and clear it if it is true.
Enable the thread operation SPDK_THREAD_OP_RESCHED and add
nvmf_request_spdk_thread_reschedule() to the case of
SPDK_THREAD_OP_RESCHED in nvmf_reactor_thread_op().
Following patch will add repeated calls to spdk_thread_set_cpumask()
to exercise the feature.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I60a4213c139b3e6f16ccb7065dea34ffe760de13
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2541
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replace mutex and linked list by lockless ring for nvmf_reactor->threads.
If we create event call, we will be able to keep linked list and
remove only mutex. However, simple replacement of locked linked list
by lockless ring will be enough for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I590a385ff018ad20c7d6752b0a3a5562e3b68510
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2579
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Stop creating the default lightweight thread per POSIX thread. Additionally,
substitute the created master thread into g_init_thread directly as a
preparation to the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I09643491e6b5aaf91d9958481f05e264a2ac5f7d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2542
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This test prevents anyone from adding a function that begins with
spdk to the lib or module directories without also adding that file
to the corresponding map file and a header in spdk/include or
spdk_internal/include.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ife7db13d4bb8fec7570c8492ac3326222a850c36
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2423
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When testing fuse with blobfs, we used "bs=4k count=32" as the test case,
but when it comes to bdev layer, the IO size is 64KiB, and alignment is 4KiB,
so bdev_io_get_buf() will return error as the following message:
bdev.c: 789:bdev_io_get_buf: *ERROR*: Length + alignment 69632 is larger than allowed
so here we can resize the AIO alignment size from 4096 to 512, because the bdev memory
pool default alignment size is 512, with this change the error will not occur in
bdev layer.
For the umount operation, since the fuse module will use send message to do the umount,
here we can insert one second barrier to wait for the umount to be completed before
killing the process.
Fix issue #1406.
Change-Id: Id3c67900c87a5797718c28c184a925275f90c7d4
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2587
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When VM shutdown there will be an error message 'VHOST_CONFIG: recvmsg failed' printed.
The return value of recvmsg will be 0 when the peer has performed an orderly shutdown,
or -1 if an error occurred. So adding logs to distinguish these two different situations
to avoid confusing and to hint accurately.
Signed-off-by: Dayu Liu <liu.dayu@zte.com.cn>
Change-Id: Ia4b806a11d3c6ddf076c61d1caad4fa7b16fb9b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2557
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Replace spdk_thread_lib_init() by spdk_thread_lib_init_ext() to
support dynamic SPDK thread scheduling in this sample application.
Add nvmf_reactor_thread_op() and nvmf_reactor_thread_op_supported(),
and then pass them by spdk_thread_lib_init_ext().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9498d45d74757d8893b2b415fe28bf65f8fd02d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2540
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By following the SPDK NVMe-oF target application, create and destroy
a lightweight thread per poll group instead of assuming a pool of
lightweight threads already exist at start up time. Each poll group
is only accessed from the associated lightweight thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0a221594d51373237f4ead07a3f5592dbbffa7a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2539
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
if spdk_thread_poll() calls spdk_thread_create() to create SPDK
thread dynamically, it will acquire nvmf_reactor->mutex and will
cause deadlock because the queue nvmf_reactor->threads is accessed
by any POSIX thread by holding nvmf_reactor->mutex.
If any non-owner POSIX thread manipulate nvmf_reactor->threads by
holding nvmf_reactor->threads, like general priority based scheduler,
running SPDK threads by FIFO will be better.
Change nvmf_reactor_run() to dequeue a SPDK thread from the head, run
it, and then enqueue it to the tail. Release nvmf_reactor->mutex
while spdk_thread_poll() is executed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9b4040cc4d995beaf4a1f9ed8260bb1254d7d7fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2537
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvmf_schedule_spdk_thread() is not so performance critical but
should work as designed. Guard the whole operation to decide the target
core by g_mutex. This matches the reactor's _reactor_schedule_thread().
If _reactor_schedule_thread() is refined, change this accordingly too.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9382230577442897d4d2d22b85b1ae4edd77aa98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2536
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
I found this flag weird while debugging a lvol with
thin provisioned Blob, so make it consistent with it's Blob.
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: Iae555020d5781dfcf4d4f072a47e9573d35b8705
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2435
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Using an inline function to decrease the aer notification code.
It also can benefit from adding new async events later.
Change-Id: Id0f7c57fd66ade303c625d1d1af10d41dead8994
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2547
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Fix potential bug. In nvmf_ctrlr_abort_on_pg(), when run into
the request_complete it can trigger this bug because in nvmf_qpair_abort
the ctrlr->aer_req was set to NULL.
Change-Id: I37a7e3c76c6616ca4ecbc6d9d2776ee32449c796
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2545
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add wrappers around the request and response values and track
those using the wr_id value.
This will come in handy when we start doing poll group based
completion processing.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Iaff75b03e41d49f53e55e0ce65d384567988fc9d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1165
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When we don't use SRQ and close a qpair, we will receive completions
with error status for all posted ibv_recv_wrs. This is expected and
we don't want to log an error, use debug severity in this case.
Fixes#1387
Change-Id: Ia8efb8f24628880454fab1d7f6188e7b31cffb67
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2451
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A wrong parameter is passed to memset when loading blob->active.clusters,
this leads to an unpredictable wrong lba value using thin provision LVOLs
while submitting IO requests, thus causes EIO error using QEMU vms.
Signed-off-by: Sochin Jiang <jiangxiaoqing.sochin@bytedance.com>
Change-Id: Iecea80cfa58f7a025603430d666fd9cd4d3fea8b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2431
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Currently used fork of nvme-cli (nvme-cli v1.8 with our patch)
doesn't work well with namespace manage feature (e.g. namespace
deletion or working with NSID=0xffffffff). These problems seems
to be fixed in later versions of nvme-cli (v1.11.1 for now).
Nvme-cli tool must be patched to support namespace devices
exposed as character devices. Required modification is
already merged with current nvme-cli master in
commit: e770466615096a6d41f038a28819b00bc3078e1d
and hopefully will be available in the next release of nvme-cli
(>1.11.1).
Next steps would be:
1) Change the commit hash to a release that includes mentioned
patch.
2) Drop the compilation when system repos contain the right
release.
Change-Id: I07846cba955e580f5a8861ad4c7e50e7f4adccfb
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2417
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
