The specification says:
"A host may replace its reservation key without regard to its registration
status or current reservation key value by setting the Ignore Existing Key
(IEKEY) bit to '1' in the Reservation Register command."
So for this case we treat it as a new registrant, also add UT to cover
the added cases.
Change-Id: I5990f15da36706063a35565d110ed4c6eb30a3f3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In test_spdk_nvmf_ns_event, when doing ns resize it will call
spdk_for_each_channel() to pause the subsystem. But it doesn't call
spdk_io_device_register() in advance. This is wrong and may run into
assertion with the coming change since the io_device is not found.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I077b41f812266248c39fdbdb8cdff352d3b4cb74
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8767
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Use the macros for red black tree provided by Free BSD to speed up
io_device lookup.
This change was reverted once but is re-submitted because the critical
issue was fixed by the preceding patches.
In addition to the fix, add unit tests to verify the fix explicitly.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I97ed77f6e5ceacdf2593c9751b55a7d0b92c0b35
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8525
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Create a single nvme_bdev_channel for each nvme_bdev and each SPDK
thread. nvme_bdev_channel has a pair of nvme_ns and nvme_ctrlr_channel.
The pair of nvme_ns and nvme_ctrlr_channel will be aggregated by
nvme_ns_channel in the following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I095a2d6afa4ea23a87e4452b2f9d4c7e0087abe0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6605
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This fix is as same as for NVMe bdev module.
If a ANA log page has two or more ANA group descriptors, the second
or later of ANA group descriptors will not be 8-bytes aligned.
Then runtime error would occur as follows:
runtime error: member access within misaligned address 0x612000000074
for type 'const struct spdk_nvme_ana_group_descriptor', which requires
8 byte alignment
nvmf_get_ana_log_page() in lib/nvmf/ctrlr.c creates a ANA log page
data and processes 8 bytes alignment correctly because we got the
same runtime error before. However, lib/nvme had been missed at that
time.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idaa610544dc5cb659c387fcd38a2b4b97cbd06e5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8398
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
When ANA change event is notified, increment reference count, read
ANA log page, and parse it to update ANA states of namespaces.
Then remove the spdk_nvme_ns_get_ana_state() call and its stub in
unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I254ae6cb993694bf0d7f4fa4b1039b5f9243b5cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8335
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If ctrlr supports ANA log page, nvme_ctrlr allocates a buffer for ANA
log page and read ANA log page itself, and then each nvme_ns sets its
ANA state by parsing ANA log page.
Most code was brought from NVMe driver because NVMe driver already
supports ANA log page management. However it had a bug that assumed
each descriptor is 8-bytes aligned. Fix the bug together in this
patch. Besides, the implementation in NVMe driver was synchronous.
NVMe bdev module reads ANA log page asynchronously instead.
The next patch will support ANA log page update by AER handler.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib8eab887633b043b394a45702037859414b8e0a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8318
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch is used to add the support for users to configure
use kernel or userspace idxd library.
Change-Id: Ie159b897bc9595894ad8f333168efaea6c2a3d78
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7332
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch is used to add the kernel idxd support.
Without this patch, we can use userspace idxd driver
under accel_engine library (module/accel/idxd/accel_engine).
With this patch, we can also kernel idxd driver under the
accel_engine library.
Our approach is implementing a wrapper library to use IDXD
device by leveraging the kernel DSA driver in SPDK idxd library
(lib/idxd).
Then users can leverage the RPC later to configure how to
use the DSA device by user space driver or kernel driver.
In this patch, our approach is to use the idxd-config library
to export the WQs (Working Queues) exported by the kernel.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I3a25a4fe0327bd626bf6883dfbe54437d3209e51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7331
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
There is no need to map the PRP/SGL list RW since this memory is never written
to. In fact, SeaBIOS might submit a request where the PRP list resides on
read-only memory, so attempting to map it RW can break things.
Change-Id: I7e4e90b1fa7e33e81b8d5cd8dcb9568c038938ec
Signed-off-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Nvmf/vfio-user uses this API to map NVMe command sent from
VM from Guest Physical Address to Host Virtual Address, so
now we moved this API from the nvme library to nvmf/vfio-user
as an internal API.
UT code will be added back in coming patch.
Change-Id: I54817fc9811ccd9ddd97b3aa6762a2fce4bbdda6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reset requests from the upper layer will reset the underlying
ctrlrs of a bdev ctrlr but internal reset requests will reset only
the specified ctrlr.
To clarify such difference, rename bdev_nvme_reset() by
bdev_nvme_reset_io() and remove the underscore prefix from
_bdev_nvme_reset() and related functions.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9a2d124f6e2039bfecfdd6599827354d6c373f2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will reduce the size of the following patches and improve the
readability.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2ff5a10622141466d6a0352b2a6387b1412cfbf8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8641
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Create an nvme_bdev by adding namespace to an attached controller,
and use bdev_nvme_submit_request() in the test case test_pending_reset().
This will reduce the size of the following patches and will increase
the test coverage.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb05952a53949e12562e9be3f6526b0f8ad57696
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8640
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This object is per I/O path and will be aggregated by an new upper
layer object.
Hence rename nvme_bdev_ctrlr by nvme_ctrlr. Then the following patches
will add nvme_bdev_ctrlr as a different upper layer object.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ieed634447785cc98140b3d49c52a2c753988ece7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8381
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This object is used for failover and per I/O path. A controller may
have multiple of this object. A controller is per path and may be
aggregated by an new object. Hence this object is a lower layer
object.
Based on the new naming rule, rename nvme_bdev_ctrlr_trid by
nvme_ctrlr_trid.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0d5e5812560a6947a0c25af05dea168e8745130e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8380
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This object will be aggregated by the upper layer object nvme_bdev.
Hence based on the new naming rule, rename nvme_bdev_ns by nvme_ns.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I96a70213b29fb53437acd080a0787ec9f5a6759a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8379
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We will name the lower level objects starting with nvme_* and the
upper level objects starting with nvme_bdev_*.
This object is a channel per ctrlr and another new channel will be
added on top of this object.
Rename nvme_io_path by nvme_ctrlr_channel based on the new naming rule.
nvme_io_path will be used for a new object which is used to find an
optimal I/O path and to reset multiple ctrlrs sequentially when
multipath is supported.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1d4fa6d4625de3413d629a1ff412e00de12dfaf4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In cases when all cores are already doing too much work
to fit a thread, active threads should still be balanced
over all cores.
When current core is overloaded, place the thread
on another that is less busy.
The core limit is set to 95% to catch only ones that are
fully busy.
Decreasing that value would make spreading out the threads
move aggressive.
Changed thread load in one of the unit tests to reflect the
95% limit.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3b3bc5f7fbd22725441fa811d61446950000cc46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8113
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NVMe specification defines namespace identification descriptors i.e.
EUI64, NGUID, UUID.
BDEV abstracts NVMe specific details that is why only UUID is exposed,
however if NGUID is supported it is prefered to identify namespace
with NGUID over UUID.
If NGUID is not supported by NVMe Controller then fallback to UUID.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If51889a3664c0daa7cbe983048231793e3c502e0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Returning an error from this function is not useful - there
is nothing the caller can do with that information. So
change the return value to void. Also add ERRLOG and assert
if a transport actually returns a non-zero status, to
force the transport implementer (which must be an out-of-tree
transport) to make changes as necessary.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I402afec045265db178af821d25b99a6dbe066eab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8659
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fixed warnings produced by gcc-11:
compress_ut.c: In function ‘test_compress_operation’:
compress_ut.c:726:9: warning: ‘_get_mbuf_array’ accessing 32 bytes in a region of size 24 [-Wstringop-overflow=]
726 | _get_mbuf_array(exp_src_mbuf, &g_expected_src_mbufs[0], SPDK_COUNTOF(exp_src_mbuf), false);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compress_ut.c:726:9: note: referencing argument 1 of type ‘struct rte_mbuf **’
compress_ut.c:430:1: note: in a call to function ‘_get_mbuf_array’
430 | _get_mbuf_array(struct rte_mbuf *mbuf_array[UT_MBUFS_PER_OP_BOUND_TEST],
| ^~~~~~~~~~~~~~~
Fixes issue #2013.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I04d0182169e61e87401f93f56993168d7aa42e43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8692
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This update will allow us to use spdk_nvme_detach_async() and
spdk_nvme_detach_poll_async() easier to aggregate multiple detachments.
Previously, we could do:
spdk_nvme_detach_async()
spdk_nvme_detach_async()
spdk_nvme_detach_async()
and then started doing spdk_nvme_detach_poll_async().
Hence aggregating multiple detachments is already supported.
After this patch, the following sequence is possible:
spdk_nvme_detach_async() = 0
spdk_nvme_detach_async() = 0
spdk_nvme_detach_async() = 0
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_async() = 0
spdk_nvme_detach_async() = 0
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_poll_async() = -EAGAIN
spdk_nvme_detach_poll_async() = 0
The actual changes is to remove the variable polling_started from
struct spdk_nvme_detach_ctx because it is not necessary anymore.
Clarify this change via updating the header file and CHANGELOG.
Verify this change by unit test.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iebdf6c27c5304a2097b7084c315ccc99634ffa1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8468
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Recent work identified race conditions having to do with the
dynamic flow control mechanism for the idxd engine. In order
to both address the issue and simplify the code a new scheme
is now in place. Essentially every DSA device will be allowed
to accomodate 8 channels and each channel will get a fixed 1/8
the number of work queue entries regardless of how many
channels there are. Assignment of channels to devices is round
robin and if/when no more channels can be accommodated the get
channel request will fail.
The performance tests also revealed another issue that was
masked before, it's a one-line so is in this patch for convenience.
In the idxd poller we limit the number of completions allowed
during one run to avoid the poller thread from starving other
threads since as operations complete on this thread they are
immediately replaced up to the limit for the channel.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I913e809a934b562feb495815a9b9c605d622285c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8171
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Intention was for the threads to contain a single
core in the cpu mask.
This patch fixes it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8276cc906be53a7f8195d61c63bfa54bd2647b75
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8068
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Move the definition of structure spdk_io_channel into
lib/thread/thread_internal.h, so we don't have to update SO_VER for
other libraries in future when we need to change the internal details on
the structure.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I3d2ca7a8737972e0b33ce92e464da42c48f89dec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8189
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The reference count of nvme_bdev_ctrlr will be used to update ANA log
page safely, and nvme_bdev_ctrlr_destruct() can be used to decrement
reference count after completing ANA log page update.
However, nvme_bdev_ctrlr_destruct() is not a good name for this case.
Furthermore, nvme_bdev_ctrlr_destruct() does not set the destruct flag
to true, and the next patch will need nvme_bdev_ctrlr_acquire().
Hence rename nvme_bdev_ctrlr_destruct() by nvme_bdev_ctrlr_release().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I285b7ab0963d0f4ea4a7a9fd29bd026d37ba8460
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8334
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Consolidate populate_namespaces_cb() calls for error cases into
connect_attach_cb(). Then remove ctx parameter from
bdev_nvme_add_secondary_trid() because it is not necessary now.
The next patch will inline _nvme_bdev_ctrlr_create() into
nvme_bdev_ctrlr_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia94f456df160c1cc874acac4c70aad27102cb0b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8314
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvmf_ctrlr_get_log_page used req->data to store the log page result.
While the req->data only contains the first iov, if req->iovcnt is
larger than 1, the req->data may not hold the complete log page; and
even worse, the log page result may be written to invalid address and
cause memory corruption.
Change-Id: Ie6415a6bd2327419fe4b32f21ac814fd827c9e95
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7970
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The common bdev layer will split large WRITE ZEROES ranges into
multiple children requests based on the backend device's setting,
it will try to split up to 8 children requests at a time to avoid
flood requests.
Also add UT to cover different cases.
Change-Id: Id9505fbe1c297412ef97b1f73587b22bc43f770e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7875
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This mutex is not used anywhere. After removing mutex from struct
spdk_scsi_globals, struct spdk_scsi_globals is empty. Hence then
remove struct spdk_scsi_globals. We can create struct spdk_scsi_globals
again if it becomes necessary.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I749ae43f7735a7c9383d090eae2093bb52607f17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8192
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a reference to %lu to remove the assumption
about the size of a long.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Id5690eb2ad501eaacb4b266981b4dba128a7b174
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8340
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For receving the pdu, we add the crc32c offloading by Accel framework.
Because the size of to caculate the header digest size is too small, so
we do not offload the header digest.
Change-Id: If2c827a3a4e9d19f0b6d5aa8d89b0823925bd860
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7734
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
So far the schedulers had to calculate the diff of
current_stats - last_stats on their own to get tsc
from last scheduling period.
Renamed the current_stats to total_stats, but kept the meaning
as stats describing tsc for lifetime of a thread.
Instead change the meaning of the last_stats to describe
the tsc of only last scheduling period and change its name
to current_stats.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1a165ff7c1afe659b432c3127a351a96878d1f3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7843
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using the CMB for SQs is not a standard use case.
Performance can vary widely when using CMB for SQs
and is typically not the configuration used for
benchmarking.
So let's change the default value here to 'false',
users can still opt-in by setting this option to
true in the spdk_nvme_ctrlr_opts structure prior
to attach.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iab746ba777b04152ffb92fea2a2bb923a0a0bf21
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8227
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Set nvme bdev physical block size based value of NPWG and NAWUPF namespace
field.
The logic to set bdev phys_blocklen is based on how Linux nvme block driver
sets it. If the underlying nvme namespace supports NPWG/NAWUPF then bdev
phys_blocklen is set to min(npwg, nawupf)
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I6d254a9e730dccc230b9db4d1217bf7ab2f39b6c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8224
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Linking each unit test with spdk_trace allows for getting rid of lots of
stub definitions for the trace functions. The behavior stays the same,
as the trace calls result in no-op anyway because none of the unit test
apps enable tracing.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I904dac92205aadd644100af2c38989bb7979e47c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
And for some internal functions we need to pass controller
parameter so that we can do vtophys based on transport type.
Change-Id: I3ca4fa162ec9305f62b295ba21f7474c21edfe52
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8031
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This reverts commit 2246a93718.
We are seeing a lot of failure on io_device lookup in the test
pool. These only showed up after this patch was merged and sees
the most likely culprit. Reverting this patch for now while we
continue debug.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2ab098319dfae3a5356eb4fe0dbf9f4af2d2eea5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8199
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use the macros for red black tree provided by Free BSD to speed up
io_device lookup.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: Ib3bd382bbeb610503194e7d7bfd569f60a0d0121
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7894
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Adding iov to the spdk_bdev_zcopy_start function enable spdk_bdev_zcopy_start to
be used by transport layers as the iov is owned by the transport command
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I6d2be7f49566048bf25b7711ada8d2fb49fea6ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Nvme-cli submits a RESCAN IOCTL after a format command to
update any information that may have changed during the
format, such as LBA Format. This patch adds support
for RESCAN by executing nvme_ctrlr_update_namespaces to
update the controller information.
Fixes: #1964
Change-Id: I9f03e00a7f39339947ff02390f69ce806e1cfa0e
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8146
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This UT was not working as intended, and was covered by
scheduler implementation and direct modification
of the lw_thread stats in UT.
A single _reactor_run() iterates over all active pollers.
If at least one returns busy, so does the thread.
Thread load at the begining of UT is not 'low', but 100% busy.
To emulate loads outside of the 100% busy/idle, multiple
spdk_thread_polls need to be exectued.
As such to keep this case simple, the busy poller is removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I21b4c607977ed5926e0bb2743c33636cfc49f328
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
At no point in the UT thread and reactor stats
were verified. This patch makes sure that those are
checked and points out a glaring issue fixed in the
next patch.
Please note that spdk_get_ticks() and spdk_delay_us()
increase a single global value, which does not play
well with tests simulating multiple reactors.
As such each round through reactors resets the
global timer and verifies it at the end.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I27878fe35c1606ec20c548fe3bb5ede0102c8a63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8020
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
By the next patch, nvme_io_channel will be used as an I/O channel
to a single nvme_bdev. This channel is created to a single
nvme_bdev_ctrlr and has a corresponding I/O qpair. nvme_io_path
will be a better name especially when we support multipath.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic34162f3c383676c5249396a09173329fc6febce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8095
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously only a single thread could submit abort commands for admin
commands and it was the thread of the corresponding controller.
When we support multipath, we need to traverse the list of controllers
to which the target admin command is submitted. Threads of controllers
may be different.
On the other hand, the previous implementation made the I/O flow very
clean, but the I/O flow will not be clean if there are many controllers
and the subsystem does not have its thread.
This patch changes the policy so that any SPDK thread can submit abort
commands for admin commands.
Then when multipath is supported, we will be able to traverse the
list of controllers simply on the current thread to abort either I/O
command or admin command.
We already are able to submit any admin command on any thread anytime
including abort command. Hence this will not cause any issue.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib69de33f2e84b03861c7d95ce060035bdb589e4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8121
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
We can hold bdev_io directly in nvme_bdev_ctrlr as an outstanding reset.
We can put spdk_bdev_io_from_ctx(bio) into a parameter for a few
functions because it is used only once in a function.
Passing not spdk_bdev_io but nvme_bdev_io to bdev_nvme_verify_pi_error()
remove unnecessary substitution.
This is a little more efficient and simplifies the implementation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If49ad9fa42abf27decf3afcd8c994f55faa3bc70
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8094
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This ensures the discovery ctrlr initialization is
done the same as normal ctrlrs. This will be
critical as we make the driver fully asynchronous.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I33c4fd7c82d241c30e7adb89abe79b8088c8776a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8090
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Read VS (Version) register as part of controller
initialization instead of controller construction.
This prepares for upcoming changes to make
controller attach fully asynchronous. Since reading
fabrics registers is an asynchronous operation, it
will be easier to read the VS register as part of
controller initialization which operates as an
asynchronous state machine.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I771386dbdf5902633e0d9f91b3b20be98f26fdc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8076
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Following Linux NVMe host, add UUID and EUI64 comparison to
bdev_nvme_compare_ns().
Besides, previously the return value of memcmp() had been used as
the return value of bdev_nvme_compare_ns() and this was wrong.
Fix it in this patch together.
Add unit test cases for bdev_nvme_compare_ns().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I069ab53e77741d6348b847d51e84a9338e2f3787
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7755
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use the macros for red black tree provided by Free BSD to speed up bdev
name lookup in spdk_bdev_get_by_name().
In the bdev_multi_allocation test, we can get 3x ~ 5x speed up when
creating multiple bdevs for various bdev nums.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I49a2fbcccf06d4c36cbd445ce59e0b0dd4ada31d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7837
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
nvmf_get_ana_log_page used req->data to store the log page result.
While the req->data only contains the first iov, if req->iovcnt is
larger than 1, the req->data may not hold the complete log page; and
even worse, the log page result may be written to invalid address and
cause memory corruption.
The following patch will fix the same issue for other commands in
nvmf_ctrlr_get_log_page.
Fix#1946
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I495f3be05c82be5cd53609772c655c8924b9179f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7923
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Since we will reuse send_pdu for other purpose in the next
patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Iee5166131b70a25bc13aaa847bfc9066231f31a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8028
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Loading subsystems and restoring state from a JSON config file is useful
outside of the SPDK application framework, so move it to lib/init.
Change-Id: I7dd3ceace2e7b1b28eef83c91ce6a4eedc85740e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6645
Reviewed-by: Tom Nabarro <tom.nabarro@outlook.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Before this patch idle_tsc was sum of all idle tsc of all
threads running on a reactor.
There are cases when no threads are present on the reactor,
and _reactor_run() spins doing nothing.
To give more accurate representation of the reactors state,
the idle_tsc now adds time spent doing idle spinning.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If797b2a03507d17b07367d56d5f6c40cefbbbd49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7900
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
tsc_last value is used to update thread stats
during _reactor_run(). See:
spdk_thread_poll(thread, 0, reactor->tsc_last);
If no threads were present on the reactor,
this value got outdated and resulted in
adding time reactor spent with no threads to
stats of the first thread placed on that reactor.
This patch fixes thread stats by making sure
that argument to spdk_thread_poll() is up to date.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0c35fdba1b63b6ee19a5a2b34751090839cb2438
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7845
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This patch does not change the UT in functional way.
Added accounting of last_tsc and spdk_get_ticks() similar
to the real application.
First the reactor_run() [not _reactor_run()] starts
reactor->tsc_last to current time. UT now set it at the start
and never touch it again directly.
Second the spdk_get_ticks() is updated to the elapsed time
to simulate flow of time, and make sure that its further
usage is up to date to the current time.
Fixed typo in test case description for test_reactor_stats.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iaa2eb00fa3bffc2f21f1692da0259f1d023086b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7904
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
This is useful for applications even if they elect not to use the SPDK
event framework.
This doesn't shift everything in one go - just the subsystem
initialization logic. Configuration file loading also needs to move
in a separate patch later.
Change-Id: Id419df1045442d416650ed90e5ee78adfdd623d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6641
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Get all of the hot stuff to the first cache line.
* Shrink the xfer enum to one byte (it only has 3 values).
* Pull out the dif enabled flag form the dif structure so it
can be access separately
* Rearrange the members
Change-Id: Id4a2fe90a49c055a4672642faac0028671ebfae9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7827
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch changes the order of IDENTIFY_ACTIVE_NS and CONSTRUCT_NS
controller states. It is required to further improve memory management
for namespaces by allocating memory only for active ones.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Ie540442b1bd9e897afcbaa4319c139109dd0c515
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6503
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous implementation allocated memory just once at the beginning of
active NS list retrieval procedure. It allocated memory for maximum
possible number of active namespaces, i.e. 'cdata.nn'.
This patch changes allocation logic. One page is allocated at the
beginning. If more is needed, reallocation is done with one more
page.
This patch also removes SPDK_MALLOC_DMA flag from allocation since we
don't do RDMA directly into this buffer.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: Iaa80c4d70c54daaf71dcbf755c63a01a1d83b772
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6502
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use the macros for red black tree provided by Free BSD to manage
timed pollers efficiently.
Allow RB_INSERT() to insert elements with duplicated keys by changing
the compare function to return 1 if two keys are equal.
Check the return code of RB_INSERT() because this is the first use case
for RB tree macros in SPDK. We did the same for RB_REMOVE() by
adding another temporary variable but we remove it from this patch
because it is not so important compared with RB_INSERT().
When a timed poller is inserted, update the cache for the closest (leftmost)
timed poller only if the tree was empty before or the closest (leftmost)
timed poller was actually changed. We do not have to use RB_MIN()
because all duplicated entries are inserted on the right side.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibe253ca8eecc10116548b5eedbcdba8fb961b88d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7722
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This change is a preparation to first dequeue the closest timed poller
always when it is expired. Previously the poller_remove_timer() calls
were not consistent and difficult to follow.
spdk_poller_pause() sets poller to PAUSING even when it in RUNNING
and move it to PAUSED after returning from its context.
If spdk_poller_pause() and spdk_poller_resume() are called while poller
runs, it is moved to WAITING. Hence thread_execute_poller() and
thread_execute_timed_poller() ignore such cases.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I29340613a2ec0c3529d0886f4d81c0a0fdf8745d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a little complex test cases to avoid regression by the following
patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1c94edd913f0a582868e355be085a1faf9bd1a94
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7913
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This API was removed previously, so remove remaining
references in map file and unit tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iba2f6a5f5ba590d3996dc133c8181083a33d7405
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7963
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Currently we allocate buffers perf each SGL descriptor.
That can lead to a problem when we use NVME bdev with
PRP controller and length of the 1st SGL descriptor is
not multiple of block size, i.e. the initiator may send
PRP1 (which is SGL[0]) which end address is page aligned
while start address is not aligned. This is allowed by
the spec. But when we read such a data to a local buffer,
start of the buffer is page aligned when its end is not.
That violates PRP requirements and we can't handle such
request. However if we use contig buffer to write both
PRP1 and PRP2 (SGL[0] and SGL[1]) then we won't meet
this problem.
Some existing unit tests were updated, 1 new was added.
Fixes github issue #1853
Change-Id: Ib2d56112b7b25e235d17bbc6df8dce4dc556e12d
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7259
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When we introduce RB tree, getting the closest timed poller is not
O(1) but O(log N). To mitigate such delay, cache the closest timed
poller into thread, and update the cache when its content is changed.
Add unit test cases for this change. They will also clarify the current
behavior of spdk_poller_unregister() and spdk_poller_pause() for
timed pollers.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibb98a54c261859a3210034038d3953e5c93ef8aa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7720
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Some systems may have page size other than 4096 bytes
Change-Id: Id56bb1566fff480edbe1a293121fc7a68c74252a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Use spdk_thread_get_last_tsc() and spdk_thread_get_stats() in
unit tests for reactor. As a result, we can change one inclusion
from spdk_internal/thread.h to spdk/thread.h.
This is the same effort as spdk_poller.
The following patches will move the definition of struct spdk_thread and
enum spdk_thread_state from include/spdk_internal/thread.h to
lib/thread/thread.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I24d4a52ecf885b6e7db749616ee1f95b82574dc5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It's only for tcp now, but the transport here is rdma. So there is no need to assert.
Signed-off-by: ChengqiangMeng <chengqiangx.meng@intel.com>
Change-Id: Ieffaac9d31a8f9c79a0d9fd226d74268986b7a77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7823
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
This helps in next patch in series where multiple
completions will be executing.
UT is adjusted since one additional poll is required.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id72377ddef91e40cdbc2bdea6f33c23309b0ca3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
During snapshot creation the original blob becomes
a thin provisioned blob that will only the diff of data after
snapshot creation.
Despite the comment in the UT the number of polls before issuing
blob write was hitting blob BEFORE it swapped with new one.
Issuing I/O during this period shall check for io freeze
before checking cluster allocation.
Otherwise bs_io_unit_is_allocated() hits assert for thin
provisioned blob. This is because cluster map of blob is
empty, but properties have not been updated yet.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I742e1a50b14d456ae1e6de13b5111caec3e8322c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7641
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
ctrlr_discovery.c doesn't need this #include.
Including it causes bdev_module.h types to be
emitted to the debug symbols at least with some
compilers, which can result in unwanted abidiff
errors.
The unit tests do need it, so just include it
there instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iad28f9778ce08b11b52325658583ae9032295f3a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7813
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The library itself doesn't need it. The unit tests
do need it, so just include it there.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9aefd303ae12928d45141029436509f185105bd3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7812
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Nvme-cli uses NVME_IOCTL_IO_CMDs for "io-passthru"
commands to cuse devices. This patch adds support
for that IOCTL.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I20e0ac91ba08fce91bc5da1f4a1e454058cdd1e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7741
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The nvme cuse IOCTLs are actually creating passthru commands
that can be either IO passthru commands or admin commands.
Renaming the routines to correctly reflect that should limit
the confusion when reading the code. Passthru commands that
are admin commands will go to the spdk_nvme_ctrlr_cmd_admin_raw
interface and passthru commands that are IO will be sent to the
spdk_nvme_ctrlr_cmd_io_raw interface.
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I8d427fe8b5f503fdb2d193236c77d410d5b13886
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7740
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: We will also support the kernel idxd driver, so we do not
need export this feature in the module file.
Change-Id: I965e031497920f527962ba187bccd81de6977b8f
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is prepared for using the hardware offloading
engine in accel framework. And some fields in nvme_tcp_pdu
needs to be DMA addressable.
Change-Id: I75325e2cd7ff25fe938bea0ac9489a5027e3e0e9
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7770
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is used to prepare using the accel framework to calculate
the crc32 because some fields in this structure needs to be allocated
in DMA addressable memory.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ib8def5596e60f4702709da647145c4e2b6d6848f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7767
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We cannot rely on DSM/DEALLOCATE as a write zeroes
alternative, even if DLFEAT reports that deallocated
blocks will be read as all zeroes. DEALLOCATE is
advisory, meaning that blocks may not actually be
deallocated. In cases where they are not deallocated,
they will not be read back later as zeroes.
QEMU 6.0 started reporting DLFEAT as returning zeroes
for deallocated blocks but for some of our write
zeroes tests, blocks aren't actually deallocated.
We may be able to add quirks in the future if we know
that a controller reliably deallocates blocks, but
for now we need to revert this completely.
Note that since bdev/nvme module now does not support
write zeroes in any cases, we need to disable the
write zeroes call in the unit tests.
Fixes issue #1932.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I79f0673774b621a9ffcc46891728cc7719e34cdb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7723
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will help us to add unmap split function, also
remove bdev_io_type_can_split() because we changed
to use swith(io_type) ... case now.
Change-Id: I449d6a9f5bf2d0b43dd124bbfc9e1ca2afddc15a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7516
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Purpose: This patch is used to prepare to add the kernel
idxd support later.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: If89665f95d622c7342ab75050664158ec6fc615a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7330
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
(Note: this patch was previously applied as b32cfc46 and then reverted
as 63642bef.)
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7739
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
1) use spdk_bdev_get_name() accessor
2) use __SPDK_BDEV_MODULE_ONLY #define
The latter allows nvmf to just get the spdk_bdev_module
definitions and APIs that it needs for claiming bdevs
for purposes of avoiding the same namespace used in
different subsystems.
This also ensures that future changes to structures
like spdk_bdev and spdk_bdev_io will not cause
lib/nvmf so version changes.
Note: we include bdev_module.h explicitly in the
nvmf/subsystem unit tests now, before including
subsystem.c, because the unit tests do depend on
knowing the internal structure of spdk_bdev.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2f499a741d19f4749eadb402641f28137245fd23
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7738
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is already set by nvmf_tcp_req_pdu_init
when we get the pdu. So we do not set it again.
Change-Id: I034bbc46e600afd802457c0b152e303f16bafba3
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7714
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This reverts commit b32cfc467b.
This commit fails the ABI checks and only got through because the checks
were disabled until 21.04 hit.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id26b8f8ba551193d99b1ccbd31b35378b4095a20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7731
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Today the in-guest nvme device shows physical_block_size=512 even though
the backend iSCSI bdev supports physical_block_size=4K
iSCSI targets exposes physical block size using
logical_block_per_physical_block_exponent in READ_CAPACITY_16
NPWG is one of the way to let Linux nvme driver set
physical_block_size of the nvme block device.
This patch adds spdk_bdev.phys_blocklen which is updated if the iSCSI
backend exposes physical_block_size.
Later phys_blocklen is used in nvmf to set NPWG and NAWUPF to report
back during NS identity.
Linux driver uses min(nawupf, npwg) to set physical_block_size.
Similarly in scsi_bdev fill lbppbe in READ_CAP16 response
based on spdk_bdev.phys_blocklen.
Fixes#1884
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Change-Id: I0b6c81f1937e346d448f49c927eda8c79d2d75cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7310
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are three modules implementing the bdev-zone API:
bdev_nvme, bdev_ocssd, and vbdev_zone_block.
For all three modules, the number of zones can be calculated using:
block_count / zone_size.
To avoid this calculation being performed everywhere, create a helper
function in bdev_zone.h, together with the other zone APIs, such that
a user can easily get the number of zones.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I2967b15a604ab8bf4420588e7510b9820762f925
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7451
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
tcp transport doesn't send a response capsule when
c2h_success is set even if cdw0 or cdw1 are non-0.
Signed-off-by: Ed rodriguez <edwinr@netapp.com>
Signed-off-by: John Meneghini johnm@netapp.com
Change-Id: Ieba81fcc50342a2009f7931526e6f8392e26b6a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6808
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
New UT verifies number of extent page writes for
thin provisioned blobs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6b52195d26c3c1414ca862b03e8a3043bbe29b42
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7017
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This patch addresses couple issues:
1) Before issuing the md syncs the previous steps in test left
blob state in dirty state already. The resize never had a chance
to apply. This patch adds a proper md sync and polls for completion.
2) Changing blob state is something that should be done via API.
In order for dirty state to apply immidietly set_xattr is now used instead.
3) Verify test state in callbacks to make sure not only the number of
completions is correct, but their order.
This patch is introduced because of the test originally worked
only because of the extent pages always writing out its pages.
The second sync always was delayed because of this.
Meanwhile that should not be the case, since no MD or EP modification
was done.
Later in the series Extent Pages are fixed, but this test remained incorrect.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iac17c27f6ff83f2b79835aa6e48472d5293c44d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
This function finds a placement_id that does not have a group
associated with it.
Change-Id: I1306690e980fd4661f46dba9fb283f048a962eba
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7223
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When the format command is issued, the kioxia drives responds with "NS Attr change" notices.
In the callback function of the notice, the CQ Head Doorbell is updated twice with the same
value while issuing the Active NS list & identify NS commands.
Fixes: #1701
Signed-off-by: G.Balaji <gbalajieie@gmail.com>
Change-Id: I8cc80fba0a226c22753e605ef3129602a9313ce7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7149
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also update the UT.
Change-Id: I6086bf4cafca8a917a467490955d7df0ba8930d5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7495
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since the maps are unique to modules, they can store the group_impls
directly.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I7f11db558e38e940267fdf6eaacbe515334391c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7222
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This allows for different policies per module, as well as overlapped
placement_id values.
Change-Id: I0a9c83e68d22733d81f005eb054a4c5f236f88d9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7221
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Test scenario is as follows.
Some iSCSI initiator sends a Data-OUT PDU sequence such that the size of
the data segment of any Data-OUT PDU is not block size multiples.
Test if such complex Data-OUT PDU sequence is processed correctly.
Desired Data Transfer Length is 5 * SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH / 2.
Number of Data-OUT PDUs is 4. Length of the data segment of the first two PDUs are
SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH / 2 - 4. Length of the data segment of the
third PDU is SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH. Length of the data segment
of the final PDU is SPDK_ISCSI_MAX_RECV_DATA_SEGMENT_LENGTH / 2 + 8.
Three data buffers should be used and three subtasks should be created and submitted.
The test scenario assume that a iscsi_conn_read_data() call could read
the required length of the data and all read lengths are 4 bytes multiples.
The latter is to verify data is copied to the correct offset by using data patterns.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5e3939d07cd4f50fe3dcf659a18a9f8fcbe01e07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6584
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Test sharing data buffer among multiple Data-OUT PDUs.
Allocate real data buffers and the iscsi_conn_read_data() stub writes
data patterns into them.
The data pattern is to write offset per 4 bytes. This requires read
length to 4 bytes multiples but the requirement will be acceptable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I87c673c3bb0ada2afebb9332af9525cd9d7388f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6568
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This prepares for an upcoming patch to fix issue #1701 which
requires handling async events outside of the check
completions loop.
Fixes: #1701
Signed-off-by: G.Balaji <gbalajieie@gmail.com>
Change-Id: I4985d814903143511383172b1a443580db33a78f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7416
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We can return error status when processing RELEASE2 without
a reservation, also add a UT to cover this case.
Fix issue #1898.
Change-Id: I56ffa8eabfc0409307500f8740cb627aab9d2f0b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7379
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is necessary to the following patches to test reset continuation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I20e0a6b96694eb06adadfbe8e20f73380645ea43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
It is more readable to use const variable rather than raw number.
memset is the way to initialize variable size array.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I42f3f34422ea96e06a99bd6cc02e0e91349a4009
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7323
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Previously when attaching a ctrlr, all namespaces had not been
populated. Hence we had to populate each namespace manually.
It is more normal if all namespaces are populated when attaching the
corresponding ctrlr.
This patch does such change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I55d9c444c492ba6e44a609eac81b1ef25a7190a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7313
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously spdk_nvme_probe_poll_async() had processed all attaching
controllers. Hence it was not easy to attach multiple controllers in
unit tests.
Besides, add a check to exclude duplicated controllers into ut_attach_ctrlr().
If the target is any SPDK library, we should insert another patch
only to do code movement, but this is a unit test file, and so it
will be acceptable to include code movement in the same file.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9e8eba6a67b2a6d0df384214ff84aa5b0c602217
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7312
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We only need SPDK_CU_ASSERT_FATAL to check for
NULL pointers. Other checks should just use
CU_ASSERT and variants.
There are some nvme_ns_cmd_ut checks that are
using SPDK_CU_ASSERT_FATAL unnecessarily. Let's fix
them.
Found during investigation of issue #1882.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0b313e44e2ed05554783933e7d4bbc5f07a7e84a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7290
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Check if qpair has a poll group during the connect process,
use poll group's statistics or allocate own structure per
qpair. That is done due to not all applications use poll
groups and we want to avoid "if (qpair->group)"
conditions in data path.
Admin qpair always allocates its own statistics
structure but the statistics are not reported
since this qpair is not attached to a poll group.
Statistics are reported by spdk_nvme_perf tool
if --transport-stats and in bdev_nvme_transport_statistics
RPC method.
Change-Id: I58765be161491fe394968ea65ea22db1478b219a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6304
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These are interface functions that can be used by
an application e.g. spdk_nvme_perf or bdev_nvme
library. The next patches will add usage of these
functions.
Change-Id: I33b88e0e713c2ea5967f9241885e3257c5070577
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6300
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
bdev_nvme_delete() calls spdk_nvme_detach() in the end. However,
previously spdk_nvme_detach() stub did nothing and ut_detach_ctrlr()
was called separately if ctrlr wass attached by ut_detach_ctrlr().
This was to differentiate the two cases, ctrlr is statically assigned
or dynamically attached by ut_detach_ctrlr().
This might be a little confusing. Hence by adding a flag, attached,
to ctrlr, merge ut_detach_ctrlr() into spdk_nvme_detach(), and remove
ut_detach_ctrlr() calls.
Besides, change one SPDK_CU_ASSERT_FATAL to return NULL because the
other cases do that and the callers for ut_attach_ctrlr() already have
SPDK_CU_ASSERT_FATAL.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2a73f57c6031819d3ae441a6874127ff5d53fc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7311
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will make the following change simpler and testing
bdev_nvme_find_io_path() will be good.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iac82bdba88e4abfa41c2ce04f10ce41a6b7dbd71
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7106
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The following patches will aggregate multiple Data-OUT PDUs into a
single write subtask and we will not be able to use reqh->buffer_offset
to track the current offset of large write I/O to submit write subtasks.
On the other hand, each iscsi_task or iscsi_subtask is only read or write
Hence rename current_datain_offset of iscsi_task by current_data_offset
in this patch.
The next patch will use it to track the current offset of large write I/O
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I922582c5b9474a3c512f81d0f0425158a38a9a8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The following patches will want to aggregate multiple Data-OUT PDUs
into the same data buffer, but it will be 64KB at most.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I72eabbeae0b027c2fbff2a5837d180b06b0a1b49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6418
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patches will change the handler for Data-OUT PDU to
submit subtask only when 64KB data is read or F bit is set.
Previously, we had created a subtask when processing header and
before reading data segment. Creating a subtask beforehand is not
convenient for the following changes.
Hence create a subtask after reading data segment.
If LUN is removed while processing the Data-OUT PDU, the corresponding
primary task will be terminated by iscsi_clear_all_transfer_task(),
and any subtask completion is not sent to initiator. Hence we can
reject the received Data-OUT PDU safely.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb6d6988676080b458b31d12fef065f3c1de0cb6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The hotplug lib can be used for pcie devices
such as nvme, virtio_blk and virtio scsi.
For the sigbus handler, there is only one in a
process and it should handle all the devices.
And align nvme to the hotplug lib
Add the ADD uevent support for allowing the
device hotplug.
Change-Id: I82cd3b4af38ca24cee8b041a215a85c4a69e60f7
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5653
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Also fix the comment. It's never going to make sense to add a socket
to a group twice.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Id4845b77114aef32bbe4ea0e53d2e1fde8e116f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7204
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This will be useful as the same purpose as
spdk_io_channel_iter_get_io_device() and will be used in the
following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id45f5980c65543703b91df2afeb47448232fe503
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7237
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Moving nvme_ctrlr_depopulate_namespace_done() to common.c removes the
stub from bdev_ocssd_ut.c and will simplify the upcoming changes.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia94a88ca77518c7df08b52aa9298cdea5997ca1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7135
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvme_bdev_ns_to_bdev() was introduced because nvme_ns->bdev may be
removed to support multipath. However, it is unlikely now.
Hence it is easier to read to stop using nvme_bdev_ns_to_bdev() and
access nvme_ns->bdev directly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iaf35455218761bafd03060a21110ad1c4098b1db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7098
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This change separates failover case more clearly, and will make
the following changes simpler.
Merge spdk_nvme_detach() and populate_namespaces_cb() into
bdev_nvme_add_secondary_trid(). Then change the return type of
bdev_nvme_add_secondary_trid() to void and move the comment to the
head of it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0eb706728cf1b9ad7031eb66e11880a47e2ba767
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7044
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Clean up bdev_nvme_add_trid() by factoring out comparison of namespaces
and comparison of trids into helper functions, bdev_nvme_compare_namespaces()
and bdev_nvme_compare_trids(), respectively.
Then rename bdev_nvme_add_trid() by bdev_nvme_add_secondary_trid().
Rename is for clarification and clean-up is for the next patch.
The next patch will merge spdk_nvme_detach() and populate_namespaces_cb()
into the renamed bdev_nvme_secondary_trid(). Clean-up makes the
next patch simpler.
One note is that checking if the type of trid is not PCIe is done
by holding mutex now to prioritize clean up.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idc8652329dd2c721d101a724ec1a57a66c4174a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7094
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
With this change, each polling group will use one
accel_engine channel. This change will be more suitable
to utlize the underlying accelerated device.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ibab183a1f65baff7e58529ee05e96b1b04731285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7055
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The following changes will require nvme_bdev_ctrlr_create() to be
asynchronous. As a preparation, merge nvme_ctrlr_populate_namespaces()
and populate_namespaces_cb() into nvme_bdev_ctrlr_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I623f927da072d746b4bd83314c0f5bcb9cc34ef0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7043
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The API spdk_nvme_ctrlr_free_io_qpair() returns immediately if the
passed qpair is NULL, but calling spdk_nvme_ctrlr_free_io_qpair()
with NULL should be avoided.
This patch cleans up the code to ensure that nvme_ch->qpair is NULL if
disconnected and spdk_nvme_ctrlr_free_io_qpair() is called only if
nvme_ch->qpair is not NULL.
Then add a test scenario that two reset requests were submitted
simultaneously and the first reset request failed and then the second
reset request also failed. This verifies the refactoring done in the
next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iae461f7f826b0e1a4607a17e528c04a642242d6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7041
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add support for zoned namespaces in the bdev/nvme module.
Query the namespace type, and if a zoned namespace is found, set the
bdev struct members needed by the bdev_zone.h APIs.
Note that while vbdev_zone_block and bdev_ocssd have zone locks,
bdev/nvme does not need any kind of zone lock, because NVMe ZNS
supports append natively.
The whole point of the zone append command is that you don't need any
locks, even when having multiple writers, since the drive will return
back the Assigned LBA where the blocks were actually written.
If a SPDK application will utilize writes instead of zone appends,
the SPDK application itself will need a per zone lock in order to
make sure that there is only one outstanding write.
Adding zone locks in bdev/nvme would reduce the performance of zone
appends, for no reason at all.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Ibacdb9b6e839624aba869c9949231343db5914be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6911
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add support in bdev_zone.h for getting the maximum zone append data
transfer size.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I61203e64d51601232c6578a090fa52975364c1f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6910
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The specification for Maximum Data Transfer Size (MDTS) says this field
should include the length of metadata, if metadata is interleaved with the
logical block data. However, some drives can support MDTS without counting
the interleaved metadata, so for this case SPDK will only use data length
without interleaved metadata length.
Change-Id: I29920a25885699e2689be043b87122367be0e416
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6813
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch really uses the accelrated engine.
Currently, we only offload the crc32c caculation,
but it can be extended.
Change-Id: If0e4c6a44b6e1e10e03f7eca355bed418d67326b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6760
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
