These are interface functions that can be used by
an application e.g. spdk_nvme_perf or bdev_nvme
library. The next patches will add usage of these
functions.
Change-Id: I33b88e0e713c2ea5967f9241885e3257c5070577
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6300
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The new 2 API function allow to get and free stats
per poll group. New function to get transport name
have been added to report not only transport type but
also the name.
For now only RDMA transport reports statistics,
other transports will be added later.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I2824cb474fde5fa859cf8196dabac2c48c05709c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6299
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
New statistics include number of poller calls,
number of idle polls and total number of completions.
These statistics allow to estimate % of idle polls
and the number of completions per poll.
Since nvme_rdma_cq_process_completions function
returns number of completed NVMF requests and each
NVMF request consumes 2 RDMA completions (send+recv),
this function was extended to return the number of
RDMA completions.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ifdc1e2e467f645adb5d66d39ff2a379e161fbd77
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6298
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These statistics allow to estimate WRs batching
efficiency. The number of send WRs equals the total
number of submitted NVME commands.
Change-Id: I96c9836cd6b9070cf5f62e43b4d2738506866e94
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6297
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Although currently acking msg_fd inside function
msg_queue_run_batch() will also ack critical_msg's
notification, it is easier to understand the code
if moving acking msg_fd code into
thread_interrupt_msg_process().
Change-Id: I98267c5c28358334a2c1133e3dbc125788de77ab
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
As a start of combining interrupt ability into poller,
it aims to get spdk_thread & spdk_poller runnable between
poll mode and interrupt mode with dynamic switching.
spdk_interrupt_mode_is_enabled() indicate whether interrupt
mode is enabled and dynamic switching is permitted. So
spdk_interrupt_mode_is_enabled==true leads to set up
interrupt mode related resources;
in_interrupt flag indicates whether one spdk_thread now
is running in intr mode.
It is possible that spdk_interrupt_mode_is_enabled==true
but in_interrupt==false. this means spdk_thread & spdk_poller
switched to poll mode from interrupt mode due to heavy
workload coming.
To align with spdk_reactor, use "in_interrupt" to
indicate whether one spdk_thread now runs in intr.
Change-Id: I2cd806bf4dec9969f3df88fac7f6b0c0b716d907
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Restrict spdk_interrupt_mode_enable must be called
once prior to initializing the threading library.
Change-Id: I833ff63fae19882e82154195d03dd7ce56ffb1de
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6707
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use common method name and parameters for calling
subprocesses for local (Target) and remote systems
(Initiators) instead of using "check_output" (from
subprocess module) and "exec_command" (from paramiko)
separately.
Having these functions wrapped by a single common
method will allow to create common methods in Server
class more eaisly, instead of creating two copies in
Target and Initiator classes.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1c10f6a88f3d7300c227e969ad6fd901763ac52c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Parse the config file for "adq_enable" flag and enable
the option in SPDK Target and SPDK Initiator configuration.
At this point the flag has no effect on the generated
traffic, as the system and priority queues are not
configured properly. These settings will be added
gradually in following patches.
Change-Id: I5d7bc892f3aa7bbe691b7e0983294b56fcf994f5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6260
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Get detailed info about NICs installed in servers. This
is using lshw utility to make things easier and not
implement the whole logic for parsing /sys objects and
pci.ids listing in system.
Change-Id: I97871fdc9feaae1c2485574a7b488b88ac3afc4f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
The number of options for test execution grew high,
and we still need to add more. This results in a lot
of parameters to pass around in constructors, which
is hard to read and causes pylint to complain.
Instead of passing each option individually as a
separate parameter, pass them as dictionaries just
like they're defined in .json config file. This
makes managing the default values a bit harder, but
is more readable.
Change-Id: I5d88a2b7fe51d2df93edd9130678a937d34facdd
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will be helpful to simplify the upcoming change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1f170fe48d2ec1b5ea05da6a8aa3589060c5c32d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6438
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use current_data_offset of task to track the current offset of
large write I/O by following the last patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iec3a371c6050fe11478b6f158259d8f4013f5238
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6424
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Custom transport may not provide the `qpair_abort_request`
callback function, so here for transport API we will just
call it when it's not empty. We will add the callback
support with vfio-user in another patch.
Fix#1883.
Change-Id: Icd82a26bde4ed90068bc85ee04cce9642cb6135d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7291
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Replace old '/home/sys_sgsw' location by new created
'/home/sys_sgci/spdk_dependencies'
Also update readme with current user name.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ifcea15f704183c7ae0044ee02bd28b6bd891b262
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6927
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
We used the controller ready field to indicate ADMIN queue connection,
but the accept poller and ADMIN poll group may run in different
threads, this may lead vfu_attach_ctx() be called several times, so
change the 'ready' to true when a new socket connection is created.
Fix issue #1854.
Change-Id: Iab6ffd6dffb3fff5cf893e79774bc28fe0b2830c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7073
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will make the code easier to understand.
Change-Id: I7112d3fd5f0d6dce9b66d44375b68ce7d1e8951d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7072
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
unmap_q is only be called in unmap_qp, so remove this function to make the
code more clear to read.
Change-Id: I627c7a1efdcb85476cb618fced8b0bfc2d8f1f62
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6886
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When killing QEMU or remote client is terminated normally,
we can release current controller related data structure,
users may restart QEMU to connect the same socket file
again, for the new connection, vfio-user will create
a new controller data structure for it.
Here we add a lock in the endpoint data structure to protect
number of connected queue pairs variable, because controller
data structure is like a session, while endpoint is related
with the socket file, so it's safe here. Moreover, we can
use this lock to protect live migration related data
structures in future.
Change-Id: Ie7060041a253604e7a2242813ec284eae46fe4e8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6862
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This option may have been valid at one point, but is
not any longer. So remove it from the usage text.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I83747968085a77fb52d735026294bf5f82517ffc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7276
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bdev_nvme_delete() calls spdk_nvme_detach() in the end. However,
previously spdk_nvme_detach() stub did nothing and ut_detach_ctrlr()
was called separately if ctrlr wass attached by ut_detach_ctrlr().
This was to differentiate the two cases, ctrlr is statically assigned
or dynamically attached by ut_detach_ctrlr().
This might be a little confusing. Hence by adding a flag, attached,
to ctrlr, merge ut_detach_ctrlr() into spdk_nvme_detach(), and remove
ut_detach_ctrlr() calls.
Besides, change one SPDK_CU_ASSERT_FATAL to return NULL because the
other cases do that and the callers for ut_attach_ctrlr() already have
SPDK_CU_ASSERT_FATAL.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2a73f57c6031819d3ae441a6874127ff5d53fc04
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7311
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will make the following change simpler and testing
bdev_nvme_find_io_path() will be good.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iac82bdba88e4abfa41c2ce04f10ce41a6b7dbd71
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7106
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Factor out the operation to get ctrlr pointer to submit an admin
command into a helper function bdev_nvme_find_admin_path().
This will make the following changes transparent.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idabfa5874ad95414f24d414702205b0cdbc98ddb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7105
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
reset_io is stored into nvme_bdev_ctrlr->reset_bio now. Hence we can
merge completing reset_io into _bdev_nvme_reset_complete() easily.
i
As a few minor changes, to reduce the size of the following patches,
clear reset_bio before calling spdk_bdev_io_complete(), and call
spdk_bdev_io_complete() after completing ctrlr reset.
The following patches will retry pending reset_ios if reset is internal,
abort reset_ios if reset is external and fails, or succeed reset_ios
if reset is external and succeeds.
This clean-up will be helpful for such enhancement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5e0b4e04b19f4f4f3b21b2db4dc6a2b948b29c67
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7241
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvme_bdev_ctrlr->reset_bio is accessed only by the thread which called
spdk_for_each_channel() and the callback to spdk_for_each_channel()
is called after unwinding stack via message.
Hence bdev_nvme_reset() can call _bdev_nvme_reset() rather than
_bdev_nvme_reset_start() and store bio into nvme_bdev_ctrlr->reset_bio
after _bdev_nvme_reset() returns zero.
Then inline _bdev_nvme_reset_start() into _bdev_nvme_reset() because
_bdev_nvme_reset_start() has only a single caller now.
The following patches will introduce subsystem and bdev_nvme_reset()
will reset all controllers of a subsystem sequentially. These further
clean-ups will be helpful for such enhancement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I25abaa5be511c967ce20c92e4caa7dfeb3e09dd1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7240
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The following patches will aggregate multiple Data-OUT PDUs into a
single write subtask and we will not be able to use reqh->buffer_offset
to track the current offset of large write I/O to submit write subtasks.
On the other hand, each iscsi_task or iscsi_subtask is only read or write
Hence rename current_datain_offset of iscsi_task by current_data_offset
in this patch.
The next patch will use it to track the current offset of large write I/O
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I922582c5b9474a3c512f81d0f0425158a38a9a8d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The following patches will aggregate multiple Data-OUT PDUs into a
single SCSI write up to 64KB. Any variable to accumulate data length
is necessary.
Hence add data_len to mobj and accumulate read data length into
mobj->data_len, and then refer mobj instead of pdu->data and
pdu->data_segment_len to submit write subtask.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6354534769e67c0fd995bbc3c2b4a80d21a23915
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6422
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Wrap an operation to get a data buffer from mempool into a helper
function iscsi_datapool_get() and wrap an operation to put a data
buffer to mempool into a helper function iscsi_data_pool_put().
Use inline for both functions.
Besides, as a minor fix, remove duplicated file inclusion between
iscsi.c and iscsi.h.
7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia3005dffaa93a6bca16f19bb467fb5b64ae1aad2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add crc32c to struct spdk_iscsi_pdu and initialize it by SPDK_CRC32C_INITIAL,
and then use it as the initial value of _iscsi_pdu_calc_data_digest().
Separate finalization of crc32c into _iscsi_pdu_finalize_data_digest().
Move the definition of related macro constants from iscsi.c to iscsi.h.
iscsi_pdu_calc_data_digest() is used for read too. So setting
pdu->valid_data_bytes before calling iscsi_pdu_calc_data_digest()
for read.
Data split will be supported only if DIF is disabled, and hence
DIF case is not changed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9d24f605fd0d452782e17695b613cd2f63d2e42f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6421
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The following patches will want to aggregate multiple Data-OUT PDUs
into the same data buffer, but it will be 64KB at most.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I72eabbeae0b027c2fbff2a5837d180b06b0a1b49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6418
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The following patches will change the handler for Data-OUT PDU to
submit subtask only when 64KB data is read or F bit is set.
Previously, we had created a subtask when processing header and
before reading data segment. Creating a subtask beforehand is not
convenient for the following changes.
Hence create a subtask after reading data segment.
If LUN is removed while processing the Data-OUT PDU, the corresponding
primary task will be terminated by iscsi_clear_all_transfer_task(),
and any subtask completion is not sent to initiator. Hence we can
reject the received Data-OUT PDU safely.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb6d6988676080b458b31d12fef065f3c1de0cb6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6415
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The hotplug lib can be used for pcie devices
such as nvme, virtio_blk and virtio scsi.
For the sigbus handler, there is only one in a
process and it should handle all the devices.
And align nvme to the hotplug lib
Add the ADD uevent support for allowing the
device hotplug.
Change-Id: I82cd3b4af38ca24cee8b041a215a85c4a69e60f7
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5653
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The old 1.2.1 version doesn't compile against latest 5.11.x kernels
(e.g. due to recent changes in include/net/xdp.h) so upgrade to the
latest compatible release.
Also, move the url to sourceforge since ice is released more often
there under e1000 project.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I08b7beae922addeb877fe321679151b02bd253db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7011
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Most notably, crypto/sha.h was split into two separate header files,
crypto/sha1.h and crypto/sha2.h.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I43ae61034f743bf4aae7f2f29919eec92d851f01
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
collect_devices() is split into two functions:
- collect_net_devices(): Collect ethernet net devs from the
net class.
- collect_rxe_devices(): Collect all rxe devices from the
infiniband class.
This is done in order to make handling of some conditions easier.
Case and point, in newer kernels, device/net link is not anymore
created for the soft roce devices, instead only ./parent attribute
is available. collect_rxe_devices() is adjusted to handle such
a condition.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Idefa39c4a62c9e650a03e237f49940461e9782a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6992
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Introduce new utilities NVME_CTRLR_ERRLOG, NVME_CTRLR_WARNLOG and so
on to output the ctrlr's identification at different log levels.
For RDMA and TCP, the subnqn will be output and for PCIe and custom,
the traddr will be ouptput.
Change-Id: I81a112463bf752999aa1fe4e0c867d88e09a2f64
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7057
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
