Use provided configuration file via --disk-map option
instead of creating bdevs and VMs in ordered sequence
(e.g. 0 to 10, etc.).
This allows to:
- specify which NVMe device we want to use
(PCI BDF identifier)
- how to name it in SPDK nvme bdev configuration
- how many splits or lvol bdevs to create on this device
- which VMs should use created bdevs
With CPU mask configuration file this allows to better
control resources when running the test (especially in
case of NUMA optimization where using sequential for/while
loops is not a good approach).
vm_count and max_disks parameters removed. These are not
needed anymore as they're controlled by config file.
Example of config file contents:
(BDF,Spdk NvmeBdev name,Split count,VM list)
0000:1b:00.0,Nvme1,2,2 3
0000:89:00.0,Nvme3,4,4 5 6 7
Change-Id: I9fc73458825d8072537aa04880765a048e034ce4
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464565
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2045: Iterating over ls output is fragile. Use globs.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I436878774d6f86c23b1c5cf5220da297053f03e2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477397
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Vhost nightly test fails on Error: Partition have been written, but
we have been unable to inform the kernel of the change, probably
because it/they are in use.
Closes#1090
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iafd051e02b3dd32ede8a62c69c7079a0facade0c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476639
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This also requires us to change the create_test_list function to rely on
the run_test function for creating the canonical test list.
Change-Id: Ib35e7752935a3ac83de2702b6dfbd42539027f6a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476962
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In patch fdc82d3 'vm_run $@' was changed to 'vm_run "$@"' but
arguments like 'vm_run "0 1"' should be passed as
'vm_run 0 1'.
Change-Id: I2a51a31fc0b0b55079963b11587be55d9bf86a87
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Met error "touch: cannot touch './timing.txt': No such file or
directory" when running vhost_test.sh. For the working directory
is removed in "vhost_kill 0", And then "timing_exit clean_vhost"
will fail to touch timing.txt in the removed directory.
Signed-off-by: richael zhuang <richael.zhuang@arm.com>
Change-Id: I2d0818b1228ebfd6767c258a0f4c1fbbfc728016
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We will be able to distinguish case and suite in the post process
scripts based on if they have any internal tests.
Change-Id: Iff2aa5caa251924d8a842085d87eb2a17aca45d4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This test suite was doing some things as far as formatting that are
covered by the run_test framework. Also, the way the tet cases were
organized was obfuscating which migration tests are actually being run
in the autotest jobs. This configuration makes it a lot easier to
manage.
As a side note, migration-tc3a.sh and migration-tc3b are not referenced
anywhere in the test scripts. They may be extraneous.
Change-Id: Ibe6782b38cb87c90b2bc61f112f10cd35f5b4a44
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
apparently getopt used $i when iterating over variables because when
weuse --force and don't set i ourselves, bash throws errors that look
like "line 594: [[: --test-cases=1,2: attempted assignment to
non-variable (error token is "=1,2")".
Change-Id: I89937f1cdd3d3c0557c931a11707df17c7b8d87e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The shell_Restore_x variable and xtrace_restore were attempting to
accomplish the exact same thing. However, when assigning
shell_restore_x, if -x was not set, then the assignment would result in
an error causing the scripts to fail.
So just get rid of that variable entirely and replace it with the more
robust xtrace_disable, xtrace_restore mechanism.
Change-Id: Ic823ad8433bd3dc181aaa0930297cd9d74bcf528
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477966
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Use env variables to select custom qemu-img and qemu-system-x86_64
binaries. This is needed to test versus latest Qemu versions from
Github.
If env variable QEMU_BIN is not present then the defaults for test
are system-wide installed packages.
This partly reverts changes done in patch:
5502294d76
which removed possibility to run with custom Qemu binaries.
Change-Id: I8138a079ba7013dcd97aad95ae2eed6417f5b18c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477776
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
And clean out the corresponding calls to timing_enter and timing_exit
from the various test scripts.
Change-Id: I0759417b5a529e4c3649ce04cca1799c089da278
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476804
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This will allow us to use timing_enter and timing_exit directly
inside the run_test function. That function already lends itself well to
nesting the way we do our timing.
This patch series is aimed at combining the timing_*, run_test, and
report_test_completions calls all into a single place. This will greatly
reduce the number of lines of code in our bash scripts devoted to
tracking timing, formatting, and test completion. It will also enable us
to expand on the reporting of test completions. Further down the line,
this will also allow us to unify test case documentation.
Change-Id: I8e1f4bcea86b2c3b88cc6e42339c57dfce4d58f2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
fio.sh script is never used for vhost performance testing.
There are separate test scripts created just for this purpose.
Change-Id: I55e9b8c0d53100d1ce8077cf1758590bbe971dee
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Correct shellcheck rule SC2012: Use find instead of ls to better handle non-alphanumeric filenames
Change-Id: Ibfc54ac06ae4cecadd22954159d259295f99912f
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Edited config file is loaded in test via rpc.py
load_config. Because of that, each parameter is
sent "as-is" from config file, as opposed to using
rpc.py bdev_create_raid which would cause argparse to
convert all params to desired type.
Commit 445e667 changed raid_level to enum while this
config file still used int which caused nightly tests
to fail.
Change-Id: I729c7263261c73e255ab2e6071f76219a351cb19
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473565
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Correct shellcheck rule SC2140: Word is on the form "A"B"C"
(B indicated). Did you mean "ABC" or "A\"B\"C"?
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1655b2e76be7a5e3d615c5b34c5af9e4012ac49f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Corrected code in some files.
Most of cases cannot be corrected as we use global variables
defined in other files.
SC2154: var is referenced but not assigned.
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Change-Id: Id333587f81b0bc2456b0c97bac5343a8e5a22774
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2124: Assigning an array to a string!
Assign as array, or use * instead of @ to concatenate.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Id74c55b7e1c41b6469e84ac388cf8a5bd8e562a6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473276
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We tried to change all of these when updating the RPC
names, but there were some that were missed apparently.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1b27d658bb039f201ca003b1d9005e7cfa8c45c2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473340
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Do not run gen_nvme.sh and do not automatically create
nvme bdev configuration.
Allows more control over Nvme/bdev configuration when
running performance tests.
Change-Id: I9ef139921efbcc5d92d3a55c05aace929c6284e7
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464564
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Add possibility to measure CPU utilization on host server
while running FIO tests.
Change-Id: Ibc76c2b1469974297350388880a036d8778e4713
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464563
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Fix: removed vhost_dir assigment in places where it is not needed.
Change-Id: Idd120099d8c5d28901437e13b5670209f7536568
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472603
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reinstating "shift" removed in commit a2ab5eb as it was actually
needed.
Change "cmd" command string to use $@ instead of $2 so that we're
able to use more than one additional param for vhost instance.
Change-Id: If656c4319d7acfecddd2ff73104d3c79b799689f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472681
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2115: Use "${var:?}" to
ensure this never expands to /* .
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I4a6beef338b7a3c496f1b74a0cdbbdff83403ddc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Correct shellcheck rule SC2145: Argument mixes string and
array. Use * or separate argument.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I45102ead2e97cc1d6b11c21f269e58a235055c35
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470926
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Correct shellcheck rule SC2043: This loop will only ever
run once for a constant value. Did you perhaps mean to
loop over dir/*, $var or $(cmd)?"
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: If8de0a81ea889a04b8fea646fedc0a2cfe49d5f7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470737
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Patch b6af628 while addressing Shellcheck 2088,
broke the pathing to integrity_vm.sh within VM.
Originally tilde was used within quotes so it didn't expand,
since cmd was executed as root the path was correct on VM.
After the change the path was changed to $HOME, making it
actually expand on the host system (not VM). Path was made
incorrect.
Since we already scp to /root/, it shouldn't
be an issue to use that path in explicitly when executing.
This fixes recent nightly run failures.
Change-Id: I2e0ac767cbf77a71841db260e602b568b1f510a1
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470624
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Variable was used as an array but is now assigned a string.
Change-Id: I79e59d80be96657a9c2fc66f9d205458f9db67b2
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Check exit code directly with e.g. 'if mycmd;',
not indirectly with $?.
Rule disabled in test/pmem/common.sh as behaviour
may differ depends on bash version
Change-Id: Ied4c5dfb09e52c5db08becf1ad69a29a1bda426b
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This was changed recently to enable a shell coding style checker, but $*
does not represent the number of arguments supplied to the function,
rather it is an alternative version of $@ that stores all arguments in a
single string. So we should be checking against an empty string and not
0.
By checking against 0, every time we passed 0 into vm_wait_for_boot, we
tried booting every vm in that directory. This causes errors on nightly
tests and intermittent failures during per-patch testing.
Change-Id: I1850ea73ea59fdc244de1a91e4c6de1b4505e518
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Correct shellcheck rule SC2088: Tilde does not expand in quotes. Use $HOME.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Iea1eeaafc414c153f60634aaa39b0ab3272c9c48
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC1004: This backslash+linefeed is literal.
Break outside single quotes if you just want to break the line.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I7b872fa3c66685c1e8e7989f7b3b74a9e4f35325
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Arrays implicitly concatenate in [[ ]].
Use a loop (or explicit * instead of @).
Change-Id: Ib3ac2c65207dfc30aad6117cc4996cdc105f5079
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467858
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Test scripts are no longer failing and can be
re-enabled in nightly testing.
Change-Id: I07e682466f98a63c65b1d17cca47a4136809e8c9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468203
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Removing "shift" command because it was not needed and
caused vhost run command to be not properly constructed.
Needed to fix if contition for --no-pci param while at it.
There was no $no_pci variable defined after optargs were
removed.
Change-Id: I72c615fdb2a5fd507efedae100b9b79c5cfd8935
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This line called vhost_kill with 2 arguments:
$1 - string "0"
$2 - string "vhost_name"
Problem was that vhost_kill only accepts 1 argument, which
is "vhost_name". This was not noticed because in seems in
most of our tests we just use the name "0".
This would fail to kill a vhost instance in case it would
be named anything else than "0"
Change-Id: I635c5b92673abb7350d8bd6c636f6b794651f7ac
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468201
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A sub-team over a year ago agreed that there was not enough value
in checking test plans in to the repo as they require maintenance
and their primary purpose is not to document how the module is tested
but to facilitate discussion during test development. It was agreed
that we would use the review system to iterate on test plans but once
the actual tests were developed that the plan would not get checked in.
This patch just removes those that were likely in the repo before that
discussion.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I75dcdd8b4754b7ecb4a21079b251c707557a3280
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467394
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In the event that our fuzz test passes, we should manually remove the
trace files from the /dev/shm directory. This will prevent us from
failing to allocate /dev/shm files when a machine consistently passes
the tests and doesn't reboot.
Change-Id: I2ccde6aba7d61fda3a28ed24e009c6f8f81c20b4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
You can run this at your desk as follows (from SPDK repo):
sudo -E ./test/vhost/fio/fio.sh --iso
Change-Id: Ib83e21e8b8450d1bfce6a0223642c4087f9f47dc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is patch that implements changes according to proposal
submitted in https://review.gerrithub.io/c/spdk/spdk/+/453036
Change-Id: I5423cd34cb5fc111b34cab2b7f7c6c5f11898af8
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464677
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fix SC2064 issue.
Use single quotes, otherwise trap expands now rather than
when signalled.
Change-Id: I0b3a9157f52eed037e8d217f639c64d6876ec1e1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Removing parentheses around if condition.
This unnecessarily spawns a subshell.
Removing SC2233 (Remove superfluous (..) around condition)
from check_format.sh exclusion list.
Change-Id: I0a4c266667264220a898ce80f587ae61bc113821
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Changing according to styling check done by ShellCheck.
Removing from check_format.sh exclusion list:
SC2236 - Use -n instead of ! -z
SC2070 - -n doesn't work with unquoted arguments. Quote or use [[ ]]
Change-Id: Ia9d645b9d0ce31b67c4de682395cf36f4ddc8d1f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463180
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix shellcheck styling error SC2006. Use of backtics is deprecated
and dollar-parentheses are encouraged instead.
Removing SC2006 from check_format.sh error exlusion list.
Change-Id: I8ef9d782839ff4361386720c39a28e449b5efab9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This function and the calls to it were mismatched. Make the function
calls correspond to the name of the function.
Change-Id: Iac4604fee3435621239fab2be8b0d86db926c87c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464311
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Don't require these to be numbered.
Change-Id: I385f579b41d24eea02e157e53c4fc1530864bb5b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461389
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Making this explicit makes the tests clearer
Change-Id: I6c37f873683b38b644bebc42532694d45a181d04
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are upcoming simplifications where it will be
better if these are two separate steps.
Change-Id: I618f947dc314b05a4f94ea98c63fe85539544704
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461386
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Don't use a fork of QEMU that's in a specific directory.
On the test systems, we can install the forked QEMU as
the default QEMU and put the binaries in PATH so that
it works.
Change-Id: I637d70452901c85606eb5eeb2bf6c67ae98cd92f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458597
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Using the vhost_user API on the initiator side, we can craft arbitrary
requests to fuzz the vhost target APIs. This script currently supports
vhost_blk, but will support both vhost_blk and vhost_scsi.
Change-Id: I7f0af6ca2adabbc18b7029ea77b33f47fce9c16b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454682
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Scripts were using a mix of two approaches, lets unify that so
just dollar-parenthesis syntax is used.
Also update two scripts from spdk/test which we previously missed.
Change-Id: I429f9bc158076462b419fae597f716c329f9b7aa
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also, construct this path by grabbing the home directory
of the current user.
Change-Id: Ia8d5cc2be40c0c3ac693c80a3132b970f7124183
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456704
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is much easier.
Change-Id: I4ae5f2f5b9393f65d07f39f03fa30628a40b01cf
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459304
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It's always set in autotest_common.sh, there's no need
to set it again in each test script.
Change-Id: Ib14c4189c553dad54a3065c1a1d413a5fc5a5347
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Scripts were using a mix of two approaches, lets unify that so
just dollar-parenthesis syntax is used.
Change-Id: Id093b6c82d1f766ba6af13bed720977eceaa7ffc
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457744
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Those tests are absolutely awful. For the last few days
they've been randomly failing way more often than usual
and we have no way of figuring out what the root cause is.
We know it's 'discover_bdevs' that hangs, but since it
doesn't produce any output (all redirected to null), we
can't get any relevant information out of it. The only
way to move forward is to rewrite this entire test from
scratch.
Change-Id: Ie874110008f82f3ca0dd62f733b0dac73160fbb8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457766
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is to solve below issue:
error 'Fio job '\''/migration-tc1.job'\'' does not exist'
Change-Id: I60dc6254d238878b03c5faf341b3201643286dfe
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Normal return for qemu checking , this should check before vhost/common.sh.
For qemu not installed on this machine. It may be a VM. Skipping nvmf_vhost test.
Otherwise, code will exit 1 before this normal return.
And in vhost/common.sh should with qemu checking.
Change-Id: I2285fffa6fc4384b4b172e5c443019e9ab391fa0
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456123
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds functions in autotest_common.sh,
fio_bdev() and fio_nvme() for their respective plugins.
It simplifies its usage throughout the scripts.
Additionally will help with expanding the fio cmd
line with nessecary changes only in single place.
This will be used in next patch in series to
LD_PRELOAD ASAN before fio_plugin.
Note: Did not implement changes for perf scripts,
since they are usualy run separately and didn't want
to affect those.
Similarly didn't change vhost initiator tests,
because the exported directories do not work for
inside the VM. Will need to think of a way to change it
there as well.
Change-Id: Idf750ee7aa9d5e30efc0ce430d15fa45ceccb203
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456314
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This sends an RPC to the vhost target with the given number.
Change-Id: Ifd74443087475242d3a65a0e8621dcd20ab2d1b0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456703
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No need to prefix name with spdk.
Change-Id: I9b07a52f6c88d77e1dda2c63ec951c1847780cca
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456702
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
No need to prefix name with spdk.
Change-Id: I413f78fac427a0955db495bb926bf8d6bc3dfb2a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456701
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We typically don't prefix bash functions with spdk.
Change-Id: Icda57e42acb83f4aa51731ac62f8db7ee26e658a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456700
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Nothing used this anymore. Everything is json.
Change-Id: Iaa1239422e18436b3b8819ce734955683ec63735
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456699
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Fix the following nightly failure:
> migration.sh: line 56: vhosttestinit: command not found
Change-Id: I56135c2a83de2455238eb7d40de973459019d63b
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456758
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
rootdir is the pattern used in the other tests
Change-Id: Idaedf8a3d9aeed54a9113a38986f29fa04355d9a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454797
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The vhost tests create some temporary files as they run outside
of the SPDK repostiroy. Clean these up.
Change-Id: Ic964fc6672b8a4ea088ace1b11c712eb70f7be08
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454933
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These are used when running test scripts in iso mode at
your desk.
Change-Id: I1876771d8a94c9db57636c143f7bf9d6f98bd3aa
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We don't provide windows executable for this test.
Change-Id: Iedaafba06662f776c102528f8073b6c3d56bb323
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450406
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tests for checking read-only option no longer fail.
Removing rootdir variable and sourcing commands as
*_vm.sh scripts are designed to be run as standalone
inside spawned VMs.
Change-Id: I491ebf8e2b305539e3fabdc6219ea53693ad2883
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455203
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There's a bug in Linux 5.1 (possibly 5.0 too) where
the kernel initiator driver crashes if it can't get
one queue per CPU. This will get fixed eventually,
but for now we need to remove the cases where we
restrict the number of queues per controller so that
we can test on newer kernels.
Even on cases where we're testing the SPDK initiator,
there's no real need to restrict the number of queue
pairs.
The kernel will eventually get fixed, but we should
be testing with default behavior anyways (the kernel
wants lots of queues). We'll also want to add some
regression tests to make sure the kernel doesn't
break again. But that will all come later.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9979e6d94456e075688b822b042936b63e518a4a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454819
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We do not need these lines in this script as it is meant
to run as standalone in a spawned VM.
Change-Id: I172227b6a7c6271d082f21677f13f2ce810fcfcf
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455092
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is now sourced by each of the individual test scripts.
Change-Id: I0b4982a96455fcb376310658c1f2ad90a1232379
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Follow the pattern that most of the other tests follow by
defining testdir and rootdir at the top, then sourcing
the common files.
Change-Id: I8f4374e91f20edc244e8e8bcf8f9df198b4509c6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454380
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This wasn't used in the automated tests. It's probably only
for manual testing. For manual testing we're moving to a model
where the test script can run with just the 'iso' option, so
let's drop this parameter to simplify.
Change-Id: Iaafd237bcd4185844e568e79828824bdaf31a25d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454093
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These scripts aren't tests - they're just shortcuts to be used from
the command line to run tests. But we're moving to a model where
users can run individual tests directly by passing in the 'iso' flag,
so these aren't useful any longer.
Change-Id: I0789a4d267c6ab0e111a6b2f4ffd3b6ce21d9638
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454091
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This matches the pattern used in other tests.
Many of the tests use a COMMON_DIR defined up top.
Instead of changing where this points, because it's used
for multiple things, just change the places where it
is used to source common.sh. This is lower risk for now
until these are cleaned up later.
Change-Id: Ib38ea9fdc94118c6c406f86177bab21c4e1c98b4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
We use python3 now, not python. This is important
because in next patch we will use a new 'aliases'
keyword argument in the argparse API that's only
available in Python 3.
While here, clean up some documentation that was
instructing users to call python explicitly instead
of just invoking scripts/rpc.py directly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c11e131cd56f7c994aa8fe21b4b00ae33489fdd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453460
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This file contains manual tests, so make the name
reflect that.
Change-Id: I49b494b097dda30f1d6e134b86d6c43ef6ec11b1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Beginning to shift the test script model to match the other
tests in SPDK.
Change-Id: Ica146fd7d66de904ad7a9b774eca13bf0510c297
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452264
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Run given fio config in loop X times. We use that later
to calculate the average of runs.
Previously the loop was done in CI but it's better to do
this in script.
Change-Id: Ie4126f504b2c027a1d6b4b4520152e89aadb4794
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450946
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently, if the Bdev subsystem initialization fails, the initialization failed
module does not call the fini function cleanup resource.
However, null module use the 'spdk_io_device_register' and spdk_zmalloc to request
resources. In failed path, it will cause resource leak when exiting the app.
To avoid this, it will cleanup resources when module initialization fails.
Change-Id: Ib1a89e5238252d69b6e64ea02a0bd826661349a5
Signed-off-by: Tianyu Yang <yangtianyu2@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450105
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make use of --clear-method for lvol store and lvol bdevs.
Lvols will not perform unmaps in this test.
Previously precoditioning in script was only allowed for lvol
bdevs, NVMe precond had to be done outside script.
Changing this to allow both bdev types to be preconditioned
as part of the script.
Change-Id: Ibcb4f2a084aaa60885d3e9e9c8a4f518c8ad2477
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In test soft hotremove is used.
For easier testing use only one nvme bdev instead of two.
Change-Id: Ia5543f0ae0773e38b92cc4d2325da2e3d787f674
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446528
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Test script for attaching Windows VM to vhost scsi
or vhost blk controller and creating various filesystem
types on the attached devices.
FIO integrtity test as a possible improvement in
the future.
Change-Id: I5bd784398551742a9226b9a7ba16a45edd27f474
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443359
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Test case in blockdev.sh is causing nightly tests to fail
so put it back to nightly_failing list.
Put vhost read-only test on the list to check if it passes
on qemu 3.0.0. Bring back vhost live migration test since it
is missing vhost.sh.
Change-Id: Ic8b5341808cdf843850d22fb6a22a64e92dccafa
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/436840
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
- Add option to throttle iops in VMs using cgroups
- Add option to measure CPU utilization in VMs using SAR
- Add option to limit kernel vhost CPU cores (not NUMA optimized)
- Add option to do lvol preconditioning using fio bdev plugin
before running IO performance test
Change-Id: I7e0fcf977be96ecf837385c2abc9d5dabbe2f8c5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/434229
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Two fio instancess will try to do simultaneous I/O
to a single vhost block device.
The test uses default_initiator.job as a fio config,
which apparently wasn't used anywhere and had to be
slightly adjusted to work. Specificaly, we had to
specify an empty job in the config file, as specifying
it from the command line wouldn't make it inherit
any options from the [global] section in the file.
Change-Id: I2c2a96a709c567f5c910715a5b3d85a4e28bcb97
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/419066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch rework all JSON config file reading tests. This is needed as
current approach will require to modify each test to re-launch SPDK
applications for each test type. This is hard to do because tests are
not flexible and will require to be rewritten almost from scratch. Not
metioning time to relaunch each test separatly.
Instead, just replace all old tests with one test. Launch only one
target and only one initiator. Then configure it using RPC calls. Then
config is dumped and target and initiator application is relaunched to
reread the configuration from file. Then config is dumped again and
compared.
Change-Id: Id857089aed0e6f2197cbf3ae625a4e9f4b13e8bb
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/432318
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Keep run_test inside a designated file instead of
calling them directly in autotest.sh
In similar way how nvmf and iscsi scripts are composed.
Change-Id: I19f70678a85b5764d34808f8f7a9e735556474f9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/421232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Fix vhost nightly test with Split NVMe bdevs, Raid Bdevs and
vhost blk controllers.
Bdev arguments for case with blk controller were not updated.
Change-Id: Ieba05a5e5a4a5fc2d424b3fb36d7156ef81db0e8
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/436490
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1. Use the Raid-0 bdev which based two Malloc bdevs to run
the fio test.
2. Use the Raid-0 bdev which based one Nvme bdev and one
malloc bdev to run fio test.
3. Creating lvol store on device Raid-0 which is based on
two Malloc bdevs.
Change-Id: I3fb5e5d8e445a236a6a4e8c198a6f54a1f488989
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/425546
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This helps avoid issues with nbd not being ready when
we need it.
Still keep various "modprobe nbd" in different test
files - this ensures these test files can still be
run in isolation. But remove the various "rmmod nbd"
to ensure that nbd always stays loaded. There is no
harm in just keeping nbd loaded all the time.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3597ff1f7ac53162c33a0384a33f33776cf6f182
Reviewed-on: https://review.gerrithub.io/434838
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This workaround is needed to stop EBUSY errors from NBD ioctls(). This
can be fixed in NBD bdev code but till that point lets merge this
workaround.
Change-Id: Ic1546963538beda4d4409cef93062103e2a23e34
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/434040
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Fix variable name added in patch:
https://review.gerrithub.io/#/c/spdk/spdk/+/429049/
Change-Id: I0349dfd16f784a0cc92ff64beae3389c1de8b55c
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/429485
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When running these tests, we want to set the transport opts, not
necessarily the target opts. This will also open us up to doing broader
tests in the future against different transports.
Change-Id: I73112f82c371592456c65355f53f7970878a59c3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/429049
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Boot os from a vhost controller using lvol bdev on a device with
512B block size. It performs fio integrity test.
Change-Id: Ic30a5dc33d9dd072559d9101f31e22e9e96862a7
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/421758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
