This patch adds support for saving VMD subsystem's configuration to a
JSON formatted file. It allows saving and then loading configuration
with VMD enabled without having to send the `enable_vmd` RPC.
Change-Id: I59b380ec1e1f25f60f45d2363724ed7ac78c365c
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473405
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch adds support for hotplug / hotremove detection for devices
behind the VMD. The detection acts similarly to the one implemented for
regular PCIe devices, that is user has to periodically call probe
function. Additionally, for applications not using SPDK's event
framework, spdk_vmd_hotplug_monitor has to be called periodically as
well.
Change-Id: I9f6839560efcf16c839b01976639d835f119cb47
Signed-off-by: orden smith <orden.e.smith@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use one function for VMD module initialization, regardless of whether
the initialization is performed via config or RPC. It'll allow the
module to perform additional steps during its startup that can be shared
between the config / RPC paths.
Change-Id: I1062545a9ea109bd69e01f759e701ca279d0d8de
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It can be useful for passing additional information about nvmf
target to a handler for new nvmf connections. Context can be
stored in globals as it is currently done in nvmf code. However
in case of multiple targets or languages where accessing global
state is challenging (i.e. Rust), this becomes inconvenient.
Change-Id: Ia6a2fdba4601531822b3e5fda7ac5ab89d46f6c5
Signed-off-by: Jan Kryl <jan.kryl@mayadata.io>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469263
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Enables access control to allow subsystem access on one or more FC ports.
If a subsystem definition does not have a single valid "Listen" directive,
then the subsystem will allow dynamic listen address binding. For such
subsystems,
* When a FC port comes online, FC transport will add port's address
to subsystem's listen list.
* When a FC port goes offline, FC transport will remove port's address
from subsystem's listen list.
If subsystem definition has 1 or more valid "Listen" directives then FC ports
coming online or going offline will not affect subsystem's listen address
whitelist.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: Ic7fed76e4bf8d1df0aeeae1d4fa5e6d207afccf3
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471025
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Package ip address parsing code into a separate function. This change
is the first patch in the series to enable FC listen address support.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: Ia86c61d001a091dfb9f825b68f76cdaf94537303
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Update transaction length wrt to medata size
Change buffers handling in the case of enabled DIF - add function nvmf_rdma_fill_buffer_with_md_interleave to split SGL into several parts with metadata blocks between them in order to perform RDMA operation with appropriate offsets
Add DIF generation before executing bdev IO operation
Add parsing of DifInsertOrStrip config parameter.
Since there is a limitation on the number of entries in SG list (16), the current approach has a limitation on the max transaction size which depends on the data block size. E.g. if data block size is 512 bytes then the maximum transaction size will be 512 * 16 = 8192 bytes.
In adiition, the size of IO buffer (IOUnitSize conf param) must be aligned to metadata size for better perfromance since metadata is treated as part of this buffer. E.g. if the initiator uses transaction size = 4096, data block size on nvme disk is 512 then IO buffer size should be aligned to (512 + 8) which is 4160. In other case an extra IO buffer will be consumed which will increase the number of entries in SGL and in iov.
Change-Id: I7ad2270fe9dcceb114ece34675eac44e5783a0d5
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The SPDK application framework defines a list of event subsystem
dependencies. When linking against individual shared libraries, it is
useful for this dependency structure to be codified in the shared
libraries themselves.
For example, when linking a bdev based application against
libspdk_bdev.so, one might wish to only specify this shared object at
link time. However, when you actually run the application, it will fail
to start because it is not linked to the copy and vmd subsystems.
However, once thesedependencies are added, one can effectively link
against only the exact subsystems they need and any dependent subsystems
will be linked in automatically.
Change-Id: Ic986281a162ac20b523486e9f8cccf4a0787afd7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will allow us to link individually against dpdk module libraries
without having to define those libraries dependencies.
Change-Id: Ief2140ec0fadd970aba990dab333d603dfb46317
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465704
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These directories fit in with the module concept we are forming inside
of SPDK. Essentially modules are derivative or specialized libraries that
rely on a general or core library.
Change-Id: Ib40f05422f144ff8fd579f47a3867ef4412b3372
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465455
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
