This setting may be crucial on some systems in keeping core dump files
in order, that's why we should always make sure it's main value is
restored upon exiting from autotest.sh.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I0c81a8c96c2d8f061e95c2614d9c30f4e3cdd5a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3605
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Due to the firmware response time for REVERT action, currently
we only enable this test with P4510 drives.
Change-Id: I4b02008ec0b7d2caeba20c566b1cf1b69404ae12
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We aren't going to run into any runtime issues when
linking against static libs, but we will when linking
against shared objects, so always test against shared
objects in autotest.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I2d3d6e90f5fa4c38b3f44cf35e24b4f7e43b60ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2980
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The env tests are actually mainly unit tests
and they can't run against shared objects because
we don't build unittests with shared objects.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0eb1f8cc071539881a545f4e2c36559a825a36fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2981
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If for any reason the cuse tests do not revert state
of NVMe namespaces to the original state, the test
machines would be stuck in until manual intervention.
Assumed default state is single namespace,
encompassing available space formatted as 4k block size.
This patch adds nvme_namespace_revert(), which
searches for NVMe devices that support Namespace Managment
and have some space unallocated.
When such device is found, all existing namespaces are removed
and single one created.
Fix#1435
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc3b04b3f166bf450b884674fa6a482e2fbc4c29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2829
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will help with managing the test execution and preparation.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0bd3612381d031a4015335d162f1296fd6dd213d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2823
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
"nvme_cuse" name for run_test was already used by one
of the tests in nvme.sh.
This removes the naming conflict and will prepare for further
restructure of nvme-cuse tests, where "nvme_cuse" name will
encompass all cuse tests.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If141fe0ef492e0cde8e68490550de5d48fecb5e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2822
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test creates/deletes namespaces with Namespace Manage commands
and checks if appropriate NVMe CUSE device nodes are created/removed.
Change-Id: Iecbb4949c3843e41d4dbf365b0a57de3362c8947
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1131
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Give the system some time to clear the hugepage cache
after we kick off that operation.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I18de5feee500dae456c6ba3d9759085bc6f4e96e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2280
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will help avoid the recent error with not being able
to allocate enough hugepages on VMs.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Iaf495458210da79501c7168104efe97c63b7afc7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2212
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Couple of nvme_cuse RPC operations were done as part of
nvme-cli test cases. This patch moves those out to separate
script.
Next patches in series will expand those.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia3123939901368af3570b127230f828437f39ef6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1920
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These are the final test cases from the series of ports, thus clean up
the python script and its lib as well.
Change-Id: I9923fc93fbeb8c2d54dd2dad5acae41eaf5cfff5
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/934
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Coverage and ut_coverage files would get created in
spdk dir or in directory from which the autotest.sh was
called.
Use $output_dir provided by autotest_common.sh instead
to keep all build artifacts in common place.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Iaf009182441933cb5e9bd137d0c94078272dd749
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1134
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Test in event.sh take 5 seconds on CI at this time.
For the tests to run both SPDK_RUN_FUNCTIONAL_TEST
and SPDK_TEST_EVENT had to be enabled.
This served as very minor time saver, so removing
this flag shouldn't affter test times more that the
5 seconds.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie3eaa587daf28b2efbc3cfdff5ad648b7529e7f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow to test parts of compress bdev on systems
that do not have all types of PMDs.
Once case if for testing in VMs.
For reference on changes in execution time. Current times:
Per-patch = 8 seconds
Nightly = 84 seconds
Running the script twice in this patch, most likely doubles the time.
It is not an issue in per-patch, but if increasing nightly times is blocking
different solution could be done here.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I684569651f2290956f94fcec99cebf0fe13ba0d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1364
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add rpc_cmd() bash command that sends rpc command to an
rpc.py instance permanently running in background.
This makes sending RPC commands even 17 times faster.
We make use of bash coprocesses - a builtin bash feature
that allow starting background processes with stdin and
stdout connected to pipes. rpc.py will block trying to
read stdin, effectively being always "ready" to read
an RPC command.
The background rpc.py is started with a new --server flag
that's described as:
> Start listening on stdin, parse each line as a regular
> rpc.py execution and create a separate connection for each command.
> Each command's output ends with either **STATUS=0 if the
> command succeeded or **STATUS=1 if it failed.
> --server is meant to be used in conjunction with bash
> coproc, where stdin and stdout are named pipes and can be
> used as a faster way to send RPC commands.
As a part of this patch I'm attaching a sample test
that runs the following rpc commands first with the regular
rpc.py, then the new rpc_cmd() function.
```
time {
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "0" ]
malloc=$($rpc bdev_malloc_create 8 512)
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "1" ]
$rpc bdev_passthru_create -b "$malloc" -p Passthru0
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "2" ]
$rpc bdev_passthru_delete Passthru0
$rpc bdev_malloc_delete $malloc
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "0" ]
}
```
Regular rpc.py:
```
real 0m1.477s
user 0m1.289s
sys 0m0.139s
```
rpc_cmd():
```
real 0m0.085s
user 0m0.025s
sys 0m0.006s
```
autotest_common.sh will now spawn an rpc.py daemon if
it's not running yet, and it will offer rpc_cmd() function
to quickly send RPC commands. If the command is invalid or
SPDK returns with error, the bash function will return
a non-zero code and may trigger ERR trap just like a regular
rpc.py instance.
Pipes have major advantage over e.g. unix domain sockets - the pipes
will be automatically closed once the owner process exits.
This means we can create a named pipe in autotest_common.sh,
open it, then start rpc.py in background and never worry
about it again - it will be closed automatically once the
test exits. It doesn't even matter if the test is executed
manually in isolation, or as a part of the entire autotest.
(check_so_deps.sh needs to be modified not to wait for *all*
background processes to finish, but just the ones it started)
Change-Id: If0ded961b7fef3af3837b44532300dee8b5b4663
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch introduces tests for basic RPC commands not used in
other tests:
bdev_nvme_apply_firmware
Change-Id: I3a7aff1720108548b03d581fa7664d1ff5498be5
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/533
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This test essentially confirms that the new RPC properly creates a test
file and that the script can parse that file and run through a basic set
of operations and exit without an error.
Change-Id: Idf0c831020696a3a62fcef13171eedf3fcf63f5b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477867
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Hello_blob example was never run before in autotest.
Change-Id: I1f858bed816471efed947f06107cec981dd562a4
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481570
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Now we can actually know which tests we are running on which bdevs when
we call blockdev.sh. Removing the conditionals from the configuration
setup (or failing if they don't succeed) and then calling run_test from
the top level allows us to reliably track the bdev tests and fail if
they don't run on a desired class of bdev.
Change-Id: I14e6e3d993b4af4995adcbc5f138bac4ae9d63be
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478247
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test verifies the custom identify handler functionality
by querying the NVMe drive and comparing serial and model
number from the NVMe drive with the corresponding info
from the NVMF identify result.
Signed-off-by: Michael Haeuptle <michael.haeuptle@hpe.com>
Change-Id: I9d4edb1bf32550cbf5fbd45cbfa85f9afc408fc0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481910
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adjust functional tests to
new FTL stack.
Change-Id: I0b8ff08c61793d7f1685942031aecf9cc88d1f24
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468738
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Next patch in this chain will break FTL functional
test so disable it temporary until FTL refactor will
be finished.
Change-Id: I69168209163784e13fd5f56db9daa80b6709344f
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479701
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This also requires us to change the create_test_list function to rely on
the run_test function for creating the canonical test list.
Change-Id: Ib35e7752935a3ac83de2702b6dfbd42539027f6a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476962
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SC2097: This assignment is only seen by the forked process.
SC2098: This expansion will not see the mentioned assignment.
Apply these two rules together as they point to the same code.
Change-Id: I61020e8fd4b6db2b06ae8134d1004290a9bef9e7
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We have to do this explicitly so that the list of completed tests that
comes out at the end is explicit as well.
Change-Id: Ic89357f2ebd89ea80f00010a78b2a2ad05b22591
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476963
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
We will be able to distinguish case and suite in the post process
scripts based on if they have any internal tests.
Change-Id: Iff2aa5caa251924d8a842085d87eb2a17aca45d4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
And clean out the corresponding calls to timing_enter and timing_exit
from the various test scripts.
Change-Id: I0759417b5a529e4c3649ce04cca1799c089da278
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476804
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This will allow us to use timing_enter and timing_exit directly
inside the run_test function. That function already lends itself well to
nesting the way we do our timing.
This patch series is aimed at combining the timing_*, run_test, and
report_test_completions calls all into a single place. This will greatly
reduce the number of lines of code in our bash scripts devoted to
tracking timing, formatting, and test completion. It will also enable us
to expand on the reporting of test completions. Further down the line,
this will also allow us to unify test case documentation.
Change-Id: I8e1f4bcea86b2c3b88cc6e42339c57dfce4d58f2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There are multiple things wrong with current python tests:
* they don't stop the execution on error
* the output makes it difficult to understand what really
happened inside the test
* there is no easy way to reproduce a failure if there
is one (besides running the same test script again)
* they currently suffer from intermittent failures and
there's no-one there to fix them
* they stand out from the rest of spdk tests, which are
written in bash
So we rewrite those tests to bash. They will use rpc.py
daemon to send RPC commands, so they won't take any more
time to run than python tests.
The tests are going to be split them into a few different
categories:
* clones
* snapshots
* thin provisioning
* tasting
* renaming
* resizing
* all the dumb ones - construct, destruct, etc
Each file is a standalone test script, with common utility
functions located in test/lvol/common.sh. Each file tests
a single, specific feature, but under multiple conditions.
Each test case is implemented as a separate function, so
if you touch only one lvol feature, you can run only one
test script, and if e.g. only a later test case notoriously
breaks, you can comment out all the previous test case
invocations (up to ~10 lines) and focus only on that
failing one.
The new tests don't correspond 1:1 to the old python ones
- they now cover more. Whenever there was a negative test
to check if creating lvs on inexistent bdev failed, we'll
now also create a dummy bdev beforehand, so that lvs will
have more opportunity to do something it should not.
Some other test cases were squashed. A few negative tests
required a lot of setup just to try doing something
illegal and see if spdk crashed. We'll now do those illegal
operations in a single test case, giving lvol lib more
opportunity to break. Even if illegal operation did not
cause any segfault, is the lvolstore/lvol still usable?
E.g. if we try to create an lvol on an lvs that doesn't
have enough free clusters and it fails as expected, will
it be still possible to create a valid lvol afterwards?
Besides sending various RPC commands and checking their
return code, we'll also parse and compare various fields
in JSON RPC output from get_lvol_stores or get_bdevs RPC.
We'll use inline jq calls for that. Whenever something's
off, it will be clear which RPC returned invalid values
and what were the expected values even without having
detailed error prints.
The tests are designed to be as easy as possible to debug
whenever something goes wrong.
This patch removes one test case from python tests and
adds a corresponding test into the new test/lvol/lvol2.sh
file. The script will be renamed to just lvol.sh after
the existing lvol.sh (which starts all python tests) is
finally removed.
As for the bash script itself - each test case is run
through a run_test() function which verifies there were
no lvolstores, lvols, or bdevs left after the test case
has finished. Inside the particular tests we will still
check if the lvolstore removal at the end was successful,
but that's because we want to make sure it's gone e.g even
before we remove the underlying lvs' base bdev.
Change-Id: Iaa2bb656233e1c9f0c35093f190ac26c39e78623
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459517
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
The tests were made nightly with this patch:
85bedfac7a
It is no longer applies for two reasons:
bdev_raid has seen and will see more changes in the future
test take few second on the CI, meaning that they do not take up any
meaningful part of CI time
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I5360c945549c08c81891bc733bb731ea9b93727e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475677
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We don't have opal test running in jenkins for now.
So disable this test and we can re-enable this when
we enable opal autotest.
Change-Id: I19ece0c37e6850c7b633539a402dc4b32c55320c
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475169
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds new script to verify CUSE functionality for NVMe
devices:
1) Starts spdk_tgt application
2) Attaches first found controller
3) Enables NVMe cuse devices for a controller and namespaces
4) Retrieves CUSE device names for controller and namespaces
4) Tests operations on exposed namespace devices
5) Tests operations on controller devices
NOTE: These tests requires at least one NVMe device with at least one
namespace available.
Change-Id: I5f5a7c86f8aefa73f12f4727f7520f16a599985b
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468828
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also add opal_revert_cleanup at the start of autotest.sh
because opal test might fail before revert and the drive
might be kept locked and will cause deny of service in
later test.
Change-Id: Icb9d571c59804daa559784cee457c7e804eff121
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471973
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Correct shellcheck rule SC2044: For loops over find output
are fragile. Use find -exec or a while read loop.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I3fd84ab60daab7c6971769ff4dee8a24d5d3e1bb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470746
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add module blobfs_bdev as a general module to simplify
the operations of blobfs on bdev. Then its functions
can be utilized by other libraries or apps.
blobfs_detect can be used to detect whether there is
one blobfs on given bdev.
Change-Id: Ib425574816061dc945fb652b539f791a44097a43
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
New VM image for nvme hotplug tests was crafted,
test can be re-enabled.
Fixes#524
Change-Id: Ie7e5e063cd94f2d1cad4b0826f1a51fb43577e6c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468807
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Adds an option to spdkcli.py to allow connection over a tcp
via a host address and port. These options match the format
that exists in rpc.py
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Change-Id: I7e9e1c376546dd765ffd6f4f4db88e193e9aa0ef
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467844
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There were two variables controlling libftl's tests. Only one of them
is actually needed (SPDK_TEST_FTL), so this patch removes the redundant
one.
Fixes#956
Change-Id: I125b9cb7d855351488b445da165be9e27f10f914
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use old rpc in conf.json to check
if rpc alias if handled properly.
Change-Id: I466e39dd6b4adf140225060e46752250ae30ddb4
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465666
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently the compression tests are run at the very
beginning of autotest. If someone makes any change
that breaks a generic SPDK component like RPC, he'll
find errors in that compression tests and may have
to wonder how he broke them without touching any
compress code.
To simplify root-causing and debugging, we want to
start with the most basic tests like env.sh, rpc_client.sh,
and blockdev.sh, so move the compress tests to the end.
Change-Id: If6b33d6e24841379ccd8ff6489c38a4081381ce9
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463850
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Will execute short run per patch, longer nightly. This
path only covers the ISAL PMD as there are QAT upgrades
needed in CI. It does so by using the new 'perform_tests'
RPC in both bdevio and bdevperf.
Change-Id: I93afda336d7411b695b2ddd0332cce0050d075a4
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455113
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Chunyang Hui <chunyang.hui@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
AIO bdev works on any file available from kernel.
blockdev.sh is the only palce that uses the ramdisk
in the current autotest.sh.
After removing the /dev/ram0, aio bdev still gets tested
with regular file.
Note: the QoS functionality done on AIO0 still gets
tested in usual qos.sh tests.
Change-Id: I8d219206d49626582d5848239fb0c36b25ef92a1
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is needed to create a job in jenkins that tests only the tcp
transport.
Change-Id: Iaa5a07617e9a241a9e4bd50105d5d5d1e849844e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Using the vhost_user API on the initiator side, we can craft arbitrary
requests to fuzz the vhost target APIs. This script currently supports
vhost_blk, but will support both vhost_blk and vhost_scsi.
Change-Id: I7f0af6ca2adabbc18b7029ea77b33f47fce9c16b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454682
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Tests that were thus far performed using posix net framework
can now be run with VPP. This patch adds network interface
configuration for VPP to work in iSCSI tests.
Some tests are disabled on purpose:
- IP Migration, RBD and NVMe-oF due to their tests lacking network
namespace support
- rpc_config adding/deleting IP, as VPP has separate utility for that
calsoft.sh doesn't handle TCP stream properly and fails decoding iSCSI
requests when are divided by TCP segmentation. This is very common
situation for VPP and causes that calsoft.sh never PASS.
Change-Id: I7c80427ca1675a1789ce7440796cc8d9956f1c9e
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/394174
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It's always set in autotest_common.sh, there's no need
to set it again in each test script.
Change-Id: Ib14c4189c553dad54a3065c1a1d413a5fc5a5347
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457466
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change autotest.sh to pass --transport=rdma. But this
now allows someone to run nvmf.sh with --transport=tcp
to run all of the nvmf tests with the tcp transport!
Initial testing shows that bdevio.sh fails with tcp,
so only run this test with the rdma transport. Issue
#808 has been filed - once it's resolved this
restriction can be removed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie50de4d67e504c84d6d8eebfe2b8c68b14f4ba2b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456698
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Existing raid UT already checks the logic in the raid
unmap code to intelligently send IOs to member disks.
The additional value of bdev_raid.sh is in doing a real
data validation on writes as well as confirmation that
unmaps really result in 0's following the action. Both of
these seem worth keeping however with the UT in place to
check the logic they are a better fit for nightly testing.
Change-Id: I1a758f4681d77dbddd4185162b0dd1f46525cabd
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Most of our bash test scripts source autotest_common.sh
to be able to use some autotest-specific functions like
timing_enter(). The same test scripts allow specifying
custom command line parameters without actually realizing
that those parameters can be potentially picked up by
autotest_common.sh as well.
For example, if particular nvmf tests are run in "isolation"
mode by being executed with the first param set to "iso",
and there is a file named "iso" in the current dir, that
file will be sourced. This could be bad.
In this patch we stop sourcing or even processing $1 in
autotest_common.sh. Instead, the test configuration will
be sourced just once from autobuild.sh, autopackage.sh
and autotest.sh. If the user wants to run particular test
scripts manually, he should source an SPDK test configuration
by himself - manually as well. In most cases he won't even
have two, as only a few test scripts depend on SPDK_*
variables.
Note that we still have to setup the default values for
SPDK_* variables in autotest_common.sh because some of
our test scripts actually depend on them:
> if [ $SPDK_TEST_RBD -eq 1 ]; then ...
Because it lacks any type of quotes around SPDK_TEST_RBD,
it will print the following message when that variable
is unset:
> /bin/bash: line 0: [: -eq: unary operator expected
It doesn't trigger any error ($? == 0), but can be still
a bit misleading in the script output.
Change-Id: I350045d8582d66fe1ed7697d4bcbba324cb541ad
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adds support to spdkcli.py for raid devices via UIRaidBdev with
functionality to construct and destroy raid bdevs.
Information regarding the raid can be viewed via 'show_details' on a
given pooled_device child in the tree.
Signed-off-by: Mike Carlin <mikefcarlin@protonmail.com>
Change-Id: I2ca89e641b201c09b3d4db070eac6cc0c2cdec73
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452774
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By default most of the tests are enabled, if we want to
run only tests that interests us, we need to disable each flag
separatly.
Build SPDK without additional dependencies and exit autotest.sh
early if no test configuration file is provided.
Change-Id: Id4752689479d9325242364c39c89d1236bab0344
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443762
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Misc cleanup from earlier patches, some naming issues and other
minor things that are needed before adding UT.
Change-Id: Ic76f0e2fd12e48782b048fb8785902b1098cf352
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All test cases should work. Instead of passing
every test case to test parameter use all.
Change-Id: I99f250209a2ce09448f3fcbe4d1e8ece0f7aa94e
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447243
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Check if nested lvol stores and lvol bdevs
can be created. Check if free space for lvol store
is properly calculated.
Change-Id: I07386e397c05c5bbdbc29843686812be004592b2
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446123
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Default 'unmap' option stays as it was.
'Write_zeroes' comes useful when one wants to make sure
that data presented from lvol bdevs on initial creation presents 0's.
'None' will be used for performance tests,
when whole device is preconditioned before creating lvol store.
Instead of performing preconditioning on each lvol bdev after its creation.
Change-Id: Ic5a5985e42a84f038a882bbe6f881624ae96242c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Introduced a new variable to run functional tests.
It's enabled by default, and can be manually disabled
on systems where e.g. only unit tests are run.
SPDK_RUN_FUNCTIONAL_TEST is a supplement to SPDK_UNITTEST.
The two are completely independent - both can be enabled,
disabled, or run in any combination.
The new variable is prefixed SPDK_RUN_ as it aligns nicely
with SPDK_RUN_CHECK_FORMAT, SPDK_RUN_VALGRIND, and
SPDK_RUN_ASAN, all of which control how much is tested.
SPDK_UNITTEST should eventually follow the same pattern
as well.
This gives us 2 layers of configuration:
SPDK_TEST_* <- what is tested
SPDK_RUN_* <- how it is tested
The following would run UT+ASAN for FTL and BlobFS, without
running their functional tests:
```
SPDK_RUN_FUNCTIONAL_TEST=0
SPDK_RUN_ASAN=1
SPDK_TEST_UNITTEST=1
SPDK_TEST_FTL=1
SPDK_TEST_BLOBFS=1
```
Change-Id: I9e592fa41aa2df8e246eca2bb9161b6da6832130
Signed-off-by: Seth Howell <seth.howell@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442327
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch introduces functional tests for FTL bdev.
The tests cover various I/O workflows and check data integrity. Several
scripts have been added to test the FTL library:
* generate_config.sh - prepares configuration scripts for specified
device
* restore.sh - tests restoring device's state from the SSD
* fio.sh - runs tests based on fio and fio_plugin
The tests are run from autotest.sh when the SPDK_TEST_BDEV_FTL flag is
set.
Change-Id: I561d99ed35fe91eadd3756789cc99afe2da8c1db
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/431330
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Two fio instancess will try to do simultaneous I/O
to a single vhost block device.
The test uses default_initiator.job as a fio config,
which apparently wasn't used anywhere and had to be
slightly adjusted to work. Specificaly, we had to
specify an empty job in the config file, as specifying
it from the command line wouldn't make it inherit
any options from the [global] section in the file.
Change-Id: I2c2a96a709c567f5c910715a5b3d85a4e28bcb97
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/419066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add SPDK_TEST_CAS suite
Add basic integrity test with multithread-multidevice fio with cache
modes WT and PT
Change-Id: If2916558894d9f7efd9628eb99f7338c90b312b1
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439346
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Added set_read_only_lvol_bdev() RPC that marks
lvol bdev as read only.
This enables to create clones off of a base lvol,
without having to create additional lvol bdev with snapshot.
Change-Id: Ic20bbcd8fbebcef157acce44bfa1da035b0da459
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch rework all JSON config file reading tests. This is needed as
current approach will require to modify each test to re-launch SPDK
applications for each test type. This is hard to do because tests are
not flexible and will require to be rewritten almost from scratch. Not
metioning time to relaunch each test separatly.
Instead, just replace all old tests with one test. Launch only one
target and only one initiator. Then configure it using RPC calls. Then
config is dumped and target and initiator application is relaunched to
reread the configuration from file. Then config is dumped again and
compared.
Change-Id: Id857089aed0e6f2197cbf3ae625a4e9f4b13e8bb
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/432318
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Keep run_test inside a designated file instead of
calling them directly in autotest.sh
In similar way how nvmf and iscsi scripts are composed.
Change-Id: I19f70678a85b5764d34808f8f7a9e735556474f9
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/421232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
hotplug.sh skipped in NIGHTLY test for no VM image.
We disable the case temporarily before finding the
missing VM image.
Change-Id: I43afdaa647a85c8fc2c846f79b26885fd541b3f8
Signed-off-by: WangHaiLiang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/431097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
remove from the list test cases from rocksdb.sh
add vhost live migration tc1 and tc2
Change-Id: I2e7beff62e9c54ea86481832c29c613357e19c99
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/429480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Some tests intermittently fail due to leftover lvols
from previous runs:
$ hello_bdev -b Nvme0n1
*ERROR*: Could not open Nvme0n1 - lvol module already claimed it
Fix this by zeroing the first 1MB of each NVMe at the
start of autotest. That will remove the lvolstore, and
will get also rid of any GPT partitions - that's why
this patch also removes the explicit `parted` calls that
would try to do the same.
Since there's no way to do direct I/O with the standard
dd shipped in FreeBSD, we do the `sync` after the normal,
buffered dd.
Change-Id: I18a01bda064f836901327f1dd3cfab1f08e87b1a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/435086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This helps avoid issues with nbd not being ready when
we need it.
Still keep various "modprobe nbd" in different test
files - this ensures these test files can still be
run in isolation. But remove the various "rmmod nbd"
to ensure that nbd always stays loaded. There is no
harm in just keeping nbd loaded all the time.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3597ff1f7ac53162c33a0384a33f33776cf6f182
Reviewed-on: https://review.gerrithub.io/434838
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The timing flags in virtio.sh were configured improperly and were
preventing the timing graph from generating. Also, the vhost initiator
tests should be reported under the same timing flag.
Change-Id: I2a4b755ba98c2064e64e38609936d2f5144464cb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This script should be called when testing the crypto module. It will
configure any qat cards with class code 37c8 for use with the spdk
crypto bdev module.
Change-Id: I233069fbe9ba3c7a6463f52443234f9fe2c9a1f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/428549
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's a C libary for client to call rpc method.
Change-Id: I5378747bd9dab83a41801225ba794b3910d1f5a5
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424061
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Test to create and delete full configuration for iscsi node.
Change-Id: I1c09741bf5afcc7cf9ce58c08973439088ea3ba4
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/425179
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paweł Niedźwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Boot os from a vhost controller using lvol bdev on a device with
512B block size. It performs fio integrity test.
Change-Id: Ic30a5dc33d9dd072559d9101f31e22e9e96862a7
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/421758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I77cf0b8d64c1bfa050d61440472ff65821673b39
Reviewed-on: https://review.gerrithub.io/423999
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new script to enable converting
old INI config files to the new JSON-RPC
config file format.
This prepares for deprecating the INI
config file file format in the future.
Change-Id: I0f2bfa9a585ce3537772b662d8e4028ab08a554d
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/420457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
1.Refactor the run_test function which used to add detailed information
during run test suites and test cases.
2.Refactor the lvol feature test scripts to make sure their log is the same.
3.Users can use "run_test suite command" to run test suites
and use "run_test case command" to run test cases.
4.Update the vhost and lvol test as example.
Change-Id: I7b6387019a861bd1c4f89b9a7712e53150aea8fa
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/403610
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added new test case 702 for tasting lvol stores, similar to tc700
but with different lvol store cluster sizes.
Change-Id: Id33fc6ff9520ed21219f49f161bd41c4f6b71848
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/420758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As requested in GitHub issue #361, we should have a way to control
whether the SPDK-patched nvme-cli tests are executed.
Also add a report_test_completion call for the NVMe-oF nvme-cli test
so we can easily track whether it executed (the local PCIe nvme-cli
test already had a completion).
Change-Id: I70c26bcf2489ccfa563214a9723603aa705be7ab
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/418866
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Meneghini <johnm@netapp.com>
Reviewed-by: <ed.rodriguez@netapp.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
