Generate and insert DIF for write I/O by stream fashion in
spdk_iscsi_read_pdu().
Verify DIF for read I/O in spdk_iscsi_conn_write_pdu().
Verification can be done in spdk_iscsi_build_iovs(), but how many
writes to socket is not known beforehand, and same range may be
verified multiple times. So verify DIF before starting to write to
socket.
Change-Id: I860637758164b7d518c38fe92356562cbbe3d8f8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446406
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Add an new API spdk_dif_generate_stream() to insert DIF into
the metadata space of newly read data block by stream fashion.
This API is tested by replacing the previous DIF generation such
that DIF is generated once all data was read.
Change-Id: I757b4e6f10fe2d9d643f56ebb678c731cdad63bb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
This patch leaves metadata space in data buffer for read or write I/O
to generate and verify DIF.
For write I/O,
- in spdk_iscsi_read_pdu(), leave metadata space for every block
by calling spdk_dif_set_md_interleave_iovs() and then
spdk_iscsi_conn_readv_data(), and remember this in PDU.
- in spdk_iscsi_op_scsi() and spdk_iscsi_op_data(), set not data
length but buffer length to length of an iovec. The reason is
that the actual data length sent to SCSI layer will be larger
than the data length set in PDU. SCSI task holds data length
as an independent member and this change doesn't loose any
information.
For read I/O, in spdk_iscsi_build_iovs(), leave metadata space for
every block by calling spdk_dif_set_md_interleave_iovs().
The reason why DIF context is saved in PDU is that DIF verification
will be done in spdk_iscsi_conn_write_pdu() and DIF context will be
used there first.
Change-Id: Iac5739211f26a91b00a4ecf2f306bbecec3d78dd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446382
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Increase the size of write (data out) buffers and immediate
data buffers in the iSCSI library to store DIF. Increase is the
amount necessary to store 16 byte metadata block to the block
formatted iwth 512 + 16. 512 + 16 is the current maximum ratio
of metadata per block.
Use the macro SPDK_BDEV_BUF_SIZE_WITH_MD defined in
include/spdk/bdev.h for this purpose.
Besides, change the name of a helper function from
spdk_get_immediate_data_buffer_size() to
spdk_get_max_immediate_data_size() to differentiate the maximum
data size and the buffer size, and then to use the macro.
Change-Id: I626f8045ff706e1a6d79fa298261769bc96b7d8b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447011
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Increase the size of small and large buffers in the bdev layer
to store DIF. Increase is the amount necessary to store 16 byte
metadata to the block formatted with 512 + 16. 512 + 16 is the
current maximum ratio of metadata per block.
This change will be done in the iSCSI library in the next patch
and other libraries may be done later.
Hence add and use an new macro SPDK_BDEV_BUF_SIZE_WITH_MD(x) for
convenience.
Change-Id: I4b5498f56c9baf3e3ed93dd1c757998d7ce65141
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use new queue API to manage OCF queues dynamically
This change allows for dynamic creation and deletion of queues
on get_ and put_ io channel.
Qeueues no longer depend on number of cores in SPDK.
Queue-to-pollers mapping list is removed as well
as locks "q_ocf_lock" and "vbdev->_lock" as they became redundant
Change-Id: I5069e1f8535f505816184a333db876afb925ac44
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446841
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
According to the implementation of VPP, the vppcom_session_write() may
cannot write all provided buffer, and we shouldn't continue in this
case, just like usage of vppcom_session_read().
Change-Id: I419efc2812e3aa261a75ddbd3f7cfec60a5376d3
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were only using one pd per device anywas, and this is necessary for
shared receive queue support.
Change-Id: I86668d5b7256277fe50836863408af2215b5adf9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unregister calls are not guarded. Fix this by chekcing status before
doing unregister.
Change-Id: I593e27efdae17f6d89362fd8e4edccf2af2b7281
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445894
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Retry mechanism will stuck if there is no outstanding
IO after completion with ENOMEM. This should never
happen.
Change-Id: I58ebf8cc8a498231beef43ac20f58eeaad89afda
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446610
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The calling of spdk_bdev_finish is in wrong place,
the bdev subsystem recycling will be called by
_spdk_subsystem_fini_next. If we call spdk_bdev_finish
here, it will be called twice, so it is unnecessary.
And this patch will be used to address the issue
reported in:
https://review.gerrithub.io/#/c/spdk/spdk/+/447613/
Change-Id: I03dff8b84bd0d7b49675ce8300b3da623963e140
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447731
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was a result of a merge conflict with the recent 1fc4165 merge
which modified the ISA-L includes. We now need to use isa-l/include/x.h
format when including ISA-L files.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa38db396152d2aa4279a0dade7d47a5b9a2ba60
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447493
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Both Mellanox and Soft-RoCE NICs work with this approach.
Change-Id: I7b05e54037761c4d5e58484e1c55934c47ac1ab9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446134
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Persist through power loss feature is not supported for now.
Change-Id: Id2a5088389dc28b9d28d88c04ff819d20ea11902
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436940
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For number of registered controllers field in Reservation
Status Data Structure, we caculate all the controllers
in the subsystem which Host Identifier are same with
existing registrants.
Change-Id: Ib4de22c7020dbd8294f448f23c0c5c8c142629dd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The possible issue could be following if you shutdown NVMe-oF target
with TCP transport as an example,
=================================================================
==61022==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 560 byte(s) in 1 object(s) allocated from:
#0 0x7ffff6efcfe0 in calloc (/lib64/libasan.so.3+0xc6fe0)
#1 0x4c6216 in spdk_nvmf_tcp_listen /home/ziyeyang/spdk/lib/nvmf/tcp.c:680
Indirect leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7ffff6efcfe0 in calloc (/lib64/libasan.so.3+0xc6fe0)
#1 0x4a77b8 in spdk_posix_sock_create /home/ziyeyang/spdk/lib/sock/posix/posix.c:291
After checking the issue, it seems that we did not call
spdk_nvmf_transport_stop_listen when removing the subsystem listener.
And this patch can solve this issue.
Change-Id: Ic75d99cb0c6a3ba1c47ac79a2d8e3887b0f6b012
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447020
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch extends existing ISA-L support for NVMe/SCSI T10 CRC-16
protection check (PI). The choice of which algorithm to use is set
via an existing configure parameter. The default for x86 systems with
appropriate CPU instructions is to us ISA-L.
Testing shows that PI checking/generation will run at device speed using
ISA-L. The table-based algorithm is much faster than the original algorithm
and is provided to speed up calculations on non-x86 systems.
This patch also fixes one issue in a false configure error if nasm
is at a higher version than currently checked (i.e. 2.13.03)
Local performance testing yeilds these results:
Original - 15 mbit/sec. (code removed)
Table - 400 mbit/sec. (27 times faster than original)
ISA-L - 3,400 mbit/sec. (227 times faster than original)
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: Idc7f1d97252644d839621ffe9fa995edd922da52
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Functions moved in this patch may be used in future by
other NVMe based bdevs.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I975b61b7f78855e67d65ab7d9fd9f5dd859ac570
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443753
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Renaming functions to make it clear they are not part
of the public API.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9a283143a11090032b74684611403637bc6605a3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The reservation holder may release the reservation on
a namespace, release notification feature is supported
in comming patches.
Change-Id: If5d3158e691fcc782f7cf0b67a326bf62edf0531
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For API spdk_nvme_connect(), users can only use NULL or
struct spdk_nvme_ctrlr_opts for their own driver options,
so parameter opts_size doesn't take effect here. Since
some applications outside SPDK's git repository are using
such API, so we only remove the internal data structure
for now.
Change-Id: Ia727d2950d56abba637214ad17ecfa3eeab71d38
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445656
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Free the probe context after the controllers in the probe
context list become READY. Then users don't need to free
the context which is allocated by SPDK driver.
Change-Id: I2dcb76bacf26a401b5b559c4326764a4ddb97e83
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This isn't required anymore because spdk_subsystem_init
is now always called after an event has been executed, so it
always runs after the framework has initialized.
Change-Id: I05e1a4dd605f27247b6d43f5234173e07d9b9dd2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446996
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Just use a function pointer and a context.
Change-Id: I2d41ed2572d892f3328aadf7f22d8696816bf4d1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446995
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that the boot strap event exists, this is not
necessary.
Change-Id: I277179fbc15ebe140fd22be1b67847cf23c6153e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It just takes a function pointer and a context instead.
Change-Id: Id8cdc968ddbc3776f60ad73e9aa09983ca03fa3f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446993
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Ths patch adds an API spdk_iscsi_get_dif_ctx().
When opcode of BHS is SCSI command, spdk_iscsi_get_dif_ctx() extracts
CDB and LUN ID from BHS. When opcode of BHS is Data Out or Data In,
spdk_iscsi_get_dif_ctx() extracts TTT and get R2T task corresponding
to TTT, and gets CDB and LUN ID from the task.
Then spdk_iscsi_get_dif_ctx() gets LUN by using LUN ID and calls
spdk_scsi_lun_get_dif_ctx().
Additionally spdk_iscsi_get_dif_ctx() checks the state of the connection
and the type of the session is valid before starting decode operation
because contents of PDU is not reliable when the state of the connection
is invalid. The necessity of the check was found by the Calsoft test tool.
Checks and test cases are not matched yet but copying existing checks
from spdk_iscsi_conn_execute, spdk_iscsi_op_scsi, and spdk_iscsi_op_data
will be enough. The check added for Data Out is not necessary for Data In
but it will not be harmful for Data In.
Change-Id: Iba09e0ac3e760aa1c5b582a120596c49b9e9d51e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds an API spdk_scsi_bdev_get_dif_ctx().
spdk_scsi_bdev_get_dif_ctx() decodes opcode in CDB, and if opcode
is read or write block commands, it gets LBA and use the lower
32bits of LBA as Reference Tag. It gets DIF information from
specified bdev next. Then it sets all to DIF context and return.
spdk_scsi_bdev_get_dif_ctx() is exported to iSCSI through
spdk_scsi_lun_get_dif_ctx().
Change-Id: Id8aac164c48e9e9d4ff7cfc9fa81bb5090f3e187
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446224
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Upcoming patches will store larger data in the data buffer than
iSCSI Initiator transfers, and size of metadata is not known until
asking to SCSI layer. This addition will be used to avoid overflow
in them.
Change-Id: I43e15d0cfbfddcf01342325b134d90e3d7dae038
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446378
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds spdk_iscsi_conn_readv_data() to read PDU data
from network socket by using spdk_sock_readv().
Additionally, this patch changes the existing spdk_iscsi_conn_read_data()
to call spdk_iscsi_conn_readv_data() by creating a single struct
iovec.
Change-Id: Ied487bb71bd4261ad53c9f3744ae272e65f98d7a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446377
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new API spdk_sock_readv(sock, iov, iovcnt) to the sock
library. This will be used in SPDK iSCSI target first.
Implementation was done based on vcom_socket_readv in VPP.
Change-Id: I88a8f2af4856b1035165b78d76b4a4f4587b265d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is already done for JSON info dump. In addition, the
spdk_vhost_scsi_dev_get_tgt function might implement additional logic to
no return SCSI targets under removal process.
Change-Id: I21d6f660926091dfd34da553705116926f27b30d
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446910
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a check if the number of blocks of read I/O is not larger
than allowed. This is a preparation to the subsequent patches that
support DIF in NULL bdev.
Change-Id: I82d4c835788d2f347fd5fdef82e1def313dd49a1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446052
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds an API spdk_dif_set_md_interleave_iovs().
This function is used to leave a space for metadata for each block
when the network socket reads data, or to make the network socket
ignore a space for metadata for each block when the network socket
writes data. This function removes the necessity of data copy in
the SPDK application during DIF insertion and strip.
Change-Id: I018efd77bdadcaec4679eea4dc1e404f155b0879
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK iSCSI and SCSI target don't expose any metadata and DIF settings
to the corresponding iSCSI and SCSI initiator.
Even when SPDK iSCSI and SCSI target allocate any bdev formatted
with DIF, SCSI commands sent from iSCSI and SCSI initiator don't
have any metadata and DIF information.
For that case, iSCSI target inserts and strips DIF on behalf of
iSCSI and SCSI initiator.
Hence SPDK SCSI target has to use data block size not including
metadata to process SCSI commands correctly.
This patch replaces spdk_bdev_get_block_size by
spdk_bdev_get_data_block_size in necessary places.
Change-Id: I264c8e532d1d1b016f6d8774c8ec03389528044f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
iSCSI target will need to get data block size except for metadata.
Other SPDK application may need to get the same information
future. Hence this patch adds an new API spdk_bdev_get_data_block_size
to bdev layer. In the header file, spdk_bdev_get_data_block_size
is located next to spdk_bdev_is_md_interleaved to avoid confusion
by new users.
Change-Id: I0fd2a6d0bcf6a4c18c583f70d96cc5035fc57fe9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445082
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Unregistering by a host may cause a reservation held by the host
to be released. If a host is the last remaining reservation holder
or is the only reservation holder, then the reservation is released
when the host unregisters. This may occur with Acquire/preempt
and Register/unregister commands.
Change-Id: If59fe2fdaa69c8ad70f364618d6c281494ad6245
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A registrant can obtain a reservation on a namespace by executing
acquire command. Acquire command is associated with specific namespace.
For now only Acquire and Preempt reservation acquire action is
supported, Preempt And Abort will be supported in future.
Change-Id: Ifcbb6b414827393ffc266ceada5982b743716321
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reservations can be used by two or more hosts to coordinate
acccess to a shared namespace, host must register to a namespace
prior to establishing a reservation. Unregistering by a host
may cause a reservation release, this feature will be supported
after reservation acquire patch.
Change-Id: Id44aa1f82f30d9ecc5999a2a9a7c20b2af77774a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Borrow the ideas from iSCSI and optimize
the nvme_tcp_build_iovecs function.
Change-Id: I19b165b5f6dc34b4bf655157170dec5c2ce3e19a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446836
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
New API added for upper level to get controllers'
supported flags.
Change-Id: I51e9d0e57c355fa37f092602a94f4c08deb8898c
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446091
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Take a callback and an argument instead.
Change-Id: I9edda1a9bd506e12f309e52e520e97c0d705d6a2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446992
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Now that there is always one event to bootstrap,
we don't need an event here.
Change-Id: Ic87501461a608f5b15745a50b6e15f0f28aa55c2
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446991
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These can now be delayed. Next they'll be converted to thread
operations instead of events.
Change-Id: Id8c183621fb88594a9fd508eff064b4a1557a5b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446989
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
- locks moved from ocf to adapter code,
- 'data object' renamed to 'volume',
- context and volume API reorganized.
Change-Id: Id4670ddfcb8eda9aefabc273497498c5bd3db1d5
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/444092
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Robert Bałdyga <r.baldyga@hackerion.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will make it easier to convert these operations to
spdk_thread_send_msg.
Change-Id: I4c975c22f3967a7197e69ccd230a14bdb97ba332
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446988
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
