Replace them with `testdir` and `rootdir` that we use
in every other test. What was a BASE_DIR before is now
a testdir and what was a TEST_DIR is now a rootdir.
While here, also move autotest_common.sh include to the
top of the file.
Change-Id: Ie15b7ec14bfb7536bcc7b3787eed930798d24c78
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457464
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
In fio.sh we used `set +e` for bdev deletion RPCs
and for `wait $fio_pid`. Disabling errors from those
RPCs doesn't make sense. We expect FIO to fail due
to bdev hotremoval, but the bdev hotremoval itself
must succeed.
Besides, it's easy to forget to undo `set +e` so
don't use it. For `wait` we can use the following
paradigm instead:
```
rc=0
wait $pid || rc=$?
```
The same applies to nmic.sh, where we expect some
RPC to fail.
Change-Id: I66ce3504a0c6b5da497759f0688b6c0ea6480b61
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457463
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
If bdev is configured to use separate buffers for metadata transfer,
but it doesn't support the write zeroes command, pass empty zeroed
buffer to make sure the metadata is cleared out as well.
Change-Id: If6f024266067e5764a28a276296f651d31da4792
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
With this change, bdevio tests are not ran immediately
after starting the application.
This will allow to configure new bdevs via RPC and
run tests on demand during script's execution.
Change-Id: I9740fca92c26cb2a39fbdc7cfb132ad53cec3787
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455235
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There was a gap where nbd tests could fail, but without
trap set the app would still be present.
When here removed trap from end of the script since,
no part of the script set it up.
Change-Id: I0c435c7cd603410c2cd7a034bf955ab424e413f0
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457615
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Starting with this patch it is possible to remove a
snapshot if there is only a one clone created from it.
In such case snapshot can be removed without any data
copying. This is achieved with following steps (case
with only one clone):
1. Open snapshot (Snapshot1) that shall be removed
2. Check if the Snapshot1 has no more than 1 clone (Clone1)
3. Remove Clone1 entry from Snapshot1
4. If the Snapshot1 has a parent snapshot (Snapshot2):
4a. Add Clone1 entry to the Snapshot2 clones list
4b. Remove Snapshot1 entry from Snapshot2 clones list
5. Open Clone1 blob
6. Freeze I/O operations on Clone1
7. Temporarily override md_ro flag for Snapshot1 and Clone1
for MD modification
8. Merge Snapshot1 and Clone1 clusters maps into Clone1
clusters map
9a. If Snapshot2 is present switch parent ID and backing
bs_dev on Clone1
9b. If Snapshot2 is not present set parent ID to
SPDK_BLOBID_INVALID and backing bs_dev to zeroes_dev
10. Sync MD on Clone1
11. Sync MD on Snapshot1
12. Restore MD flags for Clone1 and Snapshot1
13. Unfreeze I/O on Clone1
14. Close Clone1 blob
15. Remove Snapshot1
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I800724b981af894e01e1912d0077c5b34a2ae634
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Report issue on ubuntu18 :
"spdk/autobuild.sh: line 55: hash: scan-build: not found"
Check that ubuntu18 should install this package:
apt-get install -y clang-tools, to fit version of ubuntu18
and later.
Move clang-analyzer which for fedora to vm_setup.sh as well.
Change-Id: Ia702c492f8b0f64705c7c15ee57a861ca14521f9
signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457554
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
SQSIZE parameter validation in Connect command was broken because QID
field in qpair was used before intialization.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I8a0b359937d661df3b9888e6084e7d0b4a9056ea
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In a test case of op_login_session_normal_test(), it is expected that
the tag of the session has any value different from the connection but
the tag of the session was not initialized.
Fixes#826
Reported-by: lorneli <lorneli@163.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I62f7a4bd301c5a74ad6ba10b1b448189f750b324
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Lorne Li <lorneli@163.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch changes the meaning of the data_len parameter of
spdk_dif_set_md_interleave_iovs from `Expected data length of the payload`
to `Expected length of the newly read data in the extended LBA payload`.
This change will align the parameters of spdk_dif_set_md_intereleave_iovs
to of spdk_dif_generate_stream.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7f9c45e78be977625713acb79d2ae82d4375f419
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457543
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Previously RPC returned just number of cases that failed,
meanwhile return from the command was 0.
Now whenever there are failures, error is reported via RPC.
This will allow to use it in bash scripts with set -e used.
Change-Id: I34997dd5f08b561bc55f391287f9942861bda57a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457614
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are some leaks in libiscsi that is external to SPDK.
With this patch, any leaks in libiscsi will be suppressed.
Please see examples of the leaks right now when running
bdevperf in initiator.sh test:
Direct leak of 176 byte(s) in 1 object(s) allocated from:
#0 0x7fd64dddfe50 in calloc (/lib64/libasan.so.5+0xeee50)
#1 0x7fd64c60edb4 in scsi_cdb_inquiry (/usr/lib64/iscsi/libiscsi.so.8+0x13db4)
Indirect leak of 256 byte(s) in 1 object(s) allocated from:
#0 0x7fd64dddfe50 in calloc (/lib64/libasan.so.5+0xeee50)
#1 0x7fd64c603a84 (/usr/lib64/iscsi/libiscsi.so.8+0x8a84)
Indirect leak of 52 byte(s) in 1 object(s) allocated from:
#0 0x7fd64dddfe50 in calloc (/lib64/libasan.so.5+0xeee50)
#1 0x7fd64c60d755 in scsi_malloc (/usr/lib64/iscsi/libiscsi.so.8+0x12755)
#2 0x7fd64c6097f8 (/usr/lib64/iscsi/libiscsi.so.8+0xe7f8)
Change-Id: I80ef23b1464841f683344c7aab99f1658a46cd36
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456766
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ASAN needs to be LD_PRELOADed before SPDK fio_plugin
in order to analyze its code.
Just adding that will report any issues in fio binary as
well as the fio_plugin.
To prevent known fio leaks from affecting the results,
a suppression list for LeakSanitizer (used in conjunction with ASAN).
At this time the suppression list contains known leaks
for fio 3.3. The list might need adjustments as fio
version is updated.
Side note. Even though it is possible to specify directory
to ignore ("leak:/usr/src/fio/"). Which in theory should
suppress any leaks in fio. It has side effect of hiding
SPDK leaks as well, since the fio_plugins leaks are
seen as coming from /usr/src/fio/ioengines.c.
See below for examples of each suppressed error:
Direct leak of 42 byte(s) in 4 object(s) allocated from:
#0 0x7f9d52f3e320 in strdup (/lib64/libasan.so.5+0x3b320)
#1 0x41f267 in get_new_job /usr/src/fio/init.c:490
Direct leak of 914936 byte(s) in 10397 object(s) allocated from:
#0 0x7f74422e8ea6 in __interceptor_calloc (/lib64/libasan.so.5+0x10dea6)
#1 0x46402e in log_io_piece /usr/src/fio/iolog.c:214
Direct leak of 608 byte(s) in 19 object(s) allocated from:
#0 0x7f74422e8ca8 in __interceptor_malloc (/lib64/libasan.so.5+0x10dca8)
#1 0x44c4e1 in add_to_dump_list /usr/src/fio/parse.c:1039
#2 0x44c4e1 in parse_option /usr/src/fio/parse.c:1098
Direct leak of 173 byte(s) in 20 object(s) allocated from:
#0 0x7f744227153d in strdup (/lib64/libasan.so.5+0x9653d)
#1 0x44b50d in __handle_option /usr/src/fio/parse.c:718
Indirect leak of 111925528 byte(s) in 1271881 object(s) allocated from:
#0 0x7f74422e8ea6 in __interceptor_calloc (/lib64/libasan.so.5+0x10dea6)
#1 0x46402e in log_io_piece /usr/src/fio/iolog.c:214
Indirect leak of 171 byte(s) in 19 object(s) allocated from:
#0 0x7f744227153d in strdup (/lib64/libasan.so.5+0x9653d)
#1 0x44c4ed in add_to_dump_list /usr/src/fio/parse.c:1040
#2 0x44c4ed in parse_option /usr/src/fio/parse.c:1098
Indirect leak of 167 byte(s) in 19 object(s) allocated from:
#0 0x7f744227153d in strdup (/lib64/libasan.so.5+0x9653d)
#1 0x44c502 in add_to_dump_list /usr/src/fio/parse.c:1042
#2 0x44c502 in parse_option /usr/src/fio/parse.c:1098
Change-Id: I9b5811993508421be50b12af160645c77ea93d7e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456315
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The lvol "tasting" done as a part of bdev examine is
done asynchronously in background, so we need to sleep
for a while before checking the list of created lvol
bdevs.
Fixes#801
Change-Id: Iab94ac5c66d329cd93955b53262fc03c6b3c9f3a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Make it able to run as standalone.
Change-Id: Ib8d5dcd300911978f3bd9192c00049a3617438f4
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457961
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Scripts were using a mix of two approaches, lets unify that so
just dollar-parenthesis syntax is used.
Change-Id: Id093b6c82d1f766ba6af13bed720977eceaa7ffc
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457744
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds the UT regarding below function
iscsi_op_login_session_normal()
It covers the target related, connection related
and session related operations.
Change-Id: I570df82df850a0b359b2d57b4e1694d8cb16de37
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457925
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
stay the print parameter same with it in the deallocate_complete().
Change-Id: I21734f2b3097fd3a1006e390ab87b0578f0cbc2a
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458029
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Partprobe is a program that informs the operating system kernel
of partition table changes, by requesting that the operating system
re-read the partition table. For instance, if you create a new
partition on one of your disks using parted, you should run
partprobe afterwards to make the kernel aware of the new partition
configuration.
This is useful for issue #799.And it's compatible with other systems.
Change-Id: Icd4c85193bd9d9e6c2b32b8463e75c7a6ff06f34
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457735
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
NVMe bdev module support separate metadata now but NVMf subsystem
cannot process bdev with separate metadata yet.
Hence reject any bdev with separate metadata to be attached
explicitly by this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I793c6c5f61deb766d7bf427ff67ccc57a48974cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Those tests are absolutely awful. For the last few days
they've been randomly failing way more often than usual
and we have no way of figuring out what the root cause is.
We know it's 'discover_bdevs' that hangs, but since it
doesn't produce any output (all redirected to null), we
can't get any relevant information out of it. The only
way to move forward is to rewrite this entire test from
scratch.
Change-Id: Ie874110008f82f3ca0dd62f733b0dac73160fbb8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457766
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We used `set +e` before bdev deletion RPCs and
`wait $fio_pid`. Disabling errors from those RPCs
doesn't make sense. We expect FIO to fail due to
bdev hotremoval, but the bdev hotremoval itself
must succeed.
Besides, it's easy to forget to undo `set +e` so
don't use it. For `wait` we can use the following
paradigm instead:
```
rc=0
wait $pid || rc=$?
```
Change-Id: I8716bd861eae85d7a8590d4bd26a65cfa10e0dc1
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457469
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For reservation feature in NVMoF, we can't support the persist through
power loss feature, now we will add the configuration file parameter
with Namespace, after users set the configuration file parameter with
one NS, then the PTPL feature can be enabled.
Change-Id: Id72699093f7e68318b9529f7bacc5c9804f7f86b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455905
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch uses the change by the last patch to initialize DIF
context in SCSI layer. Besides this patch changes the name of a
parameter from offset to data_offset to clarify the meaning.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I54bf1168ec5959432aa15dae0360c0640138b033
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Data offset are intended to correspond to DATAO in NVMe/TCP and
Buffer Offset in iSCSI.
Previously for iSCSI, buffer offset had been merged to start block
address, but passing buffer offset separately from start block address
clarifies the logic more.
On the other hand, for NVMe/TCP, passing DATAO separately from start
block address will be critically important because DATAO will bave any
alignment and will be necessary to use for not only reference tag
but also guard computation.
This patch adds data_offset to struct spdk_dif_ctx and adds it to the
parameters of spdk_dif_ctx_init(). ref_tag_offset is also added to struct
spdk_dif_ctx and it is computed by dividing data_offset by data_block_size
and is used to compute reference tag.
The next patch will use this change when getting DIF context in SCSI.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0e12ca9b1dc75d0589787520feb0c2ee0f844a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DIF UT code had used numerics extensibly for complex DIF insert/strip
UTs. But numerics was error prone and difficult to follow the logic.
Hence this patch changes numerics to variables in DIF insert/strip UTs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I40cb27167c068855dc5d1eb9e0f36818d39c73fa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
data_offset to spdk_dif_generate_stream() was wrong but the function
worked as expected because the wrong data_offset was in the same
data block as the correct data_offset.
But the subsequent patches will refine spdk_dif_generate_stream()
and this bug will cause UT failure. Hence fix the bug up front.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I45f2302deaf377fda0ec5454c61fb463231a39db
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It's randomly times out on waitforlisten. See #815
Change-Id: Ib9a75d0a96756810cb25f2a1ddf72bc800ea4b5c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Read requested range of lba map during relocation
instead whole lba map.
To read partial lba map range single move now has
three states: read, read_lba_map and write.
Free queue and write queue were merged to a single
move queue.
Change-Id: I86839f2286d42d4debf87cea40091370e5283b15
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454747
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Keep track of read lba map segments to avoid
unnecessary traffic in case ANM events.
Lba map is divided on 4KB segments which can
store 512 lba entries.
In case multipe read request on same segment
keep pending request list and process it in
read_lba_map() completion callback.
Change-Id: I2661bdb716ab7c975140e0b37aebcb17aa23901d
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453371
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is to solve below issue:
error 'Fio job '\''/migration-tc1.job'\'' does not exist'
Change-Id: I60dc6254d238878b03c5faf341b3201643286dfe
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457453
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This doesn't make difference right now, but would be
useful if we printed $BASH_SOURCE or $LINENO in xtrace
(via PS4). Those two will now point to the original
line where xtrace_restore was called rather than
always the single line inside autotest_common.sh.
Change-Id: Idf3ac8d00ad9610960678351014334013149b88d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456964
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Moving verifying test parameters to single function function.
This is start of series that will add RPC to start bdevperf tests,
allowing configuration beforehand.
In future verify_test_params() will be used to verify parameters
passed via RPC as well.
Change-Id: I0aff7d9fa9f99205b3559b0ea081aa3690013faa
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457223
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For the nvme device, I/Os are completed asynchronously. So we
need to check the outstanding I/Os before putting IO channel
when we hot remove the device. We should be sure that all the
I/Os have been completed when we change the sgroup->state to
PAUSED, so that we can update the subsystem.
Fix#615#755
Change-Id: I0f727a7bd0734fa9be1193e1f574892ab3e68b55
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452038
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We're about to make SPDK vhost work against the upstream
rte_vhost from DPDK 19.05+ and vhost-nvme tests currently
stay in the way. vhost-nvme is only supported in our
modified rte_vhost fork and while it could be implemented
entirely in SPDK against the latest upstream rte_vhost
APIs, there are just no plans to do that now.
For that reason we disable all vhost-nvme tests.
Change-Id: I2d43bbe75dcab7535e7b1254ca75cb78b6d446fa
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456960
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Allow the user to select target bdev to be used by bdevperf. It's useful
when the config contains multiple bdevs, but only one is supposed to be
utilized by bdevperf directly.
Change-Id: I51aa645dcf60a4413057d86f68fe24442b280367
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456787
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The target list is now updated inside bdevperf_construct_target. That
way, if the target is successfully created, it'll already be on the
target list once this function finishes.
Change-Id: I364c45005c28deadae37615b6ac85f3860fc5080
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457089
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Normal return for qemu checking , this should check before vhost/common.sh.
For qemu not installed on this machine. It may be a VM. Skipping nvmf_vhost test.
Otherwise, code will exit 1 before this normal return.
And in vhost/common.sh should with qemu checking.
Change-Id: I2285fffa6fc4384b4b172e5c443019e9ab391fa0
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456123
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Almost all I/O callbacks in ftl utilize data in ftl_io, which is
initialized as callback argument in ftl_io_init_internal. This patch
changes the behavior to always returning the ftl_io struct in addition
to an extra opaque buffer.
Signed-off-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Change-Id: I611ab1b33575f599798a2bb65c231a724c852c7f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455831
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
disable FIO norandommap flag because it is incompatible with
verify which in context of async IO could cause verification errors.
More on norandommap:
https://fio.readthedocs.io/en/latest/fio_doc.html#cmdoption-arg-norandommap
Change-Id: I94392495a1f9f06360e3791fca31b88908d19dcb
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457001
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We check if get_ocf_bdevs after shutdown is the same as before,
which shows that state for all vbdevs wes correctly restored from metadata.
Change-Id: I9089642aeb840fc940b07908aa39c8193887432f
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455424
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
