On my system, the git grep for ^SPDK_RPC_REGISTER(
fails because the ( is unmatched. It seems we should
escape it, although clearly our CI systems don't seem
to require it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6412e27e79488616743f76b2d9eac8f62b996078
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8393
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When the property is 8 bytes but the host only requested
4, we need to mask and only return the bytes requested
by the host. Wait to do the DEBUGLOG until after
that has happened.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8f476a47e9fd07bf652fd64f3b1c17d650374167
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8506
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Interpret bare --with-dpdk opt as user's request to find installed
(provided by the distro) DPDK's libs|include files and use them during
the build.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I9da99671b95af0121194b3a6d53636b0ded71f1b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8348
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tom Nabarro <tom.nabarro@intel.com>
Reviewed-by: <tomasz.rochumski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This particular section must be defined in one place hence the
%{requirements_list} cannot be passed down later on. This requires
reordering of the .spec a bit. Most notably, all global macros are
now defined at the very beginning so then Requires section can be
build properly.
Also, use %() to expand the macro which holds the requirements as
bare "Requires: %{foo}" is not valid.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I69430f73d10204325fc825ecc392506f261ebaf1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8347
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Without it multiple threads can race and end up sharing a device
when the intention is sharing only after full round robin.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I29b854ff837d56078bc033802d3df244728a29aa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8187
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Was using "dst" in some cases and "crc_dst" in others for crc32c
related calls. Update them to always use crc_dst
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icf200f1734c64c29881f23b02b8d12bad81b3ca0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Recent work identified race conditions having to do with the
dynamic flow control mechanism for the idxd engine. In order
to both address the issue and simplify the code a new scheme
is now in place. Essentially every DSA device will be allowed
to accomodate 8 channels and each channel will get a fixed 1/8
the number of work queue entries regardless of how many
channels there are. Assignment of channels to devices is round
robin and if/when no more channels can be accommodated the get
channel request will fail.
The performance tests also revealed another issue that was
masked before, it's a one-line so is in this patch for convenience.
In the idxd poller we limit the number of completions allowed
during one run to avoid the poller thread from starving other
threads since as operations complete on this thread they are
immediately replaced up to the limit for the channel.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I913e809a934b562feb495815a9b9c605d622285c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8171
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In spdk_idxd_configure_chan(), if memory allocation fails in
TAILQ_FOREACH() {} code range, we will goto err_user_comp and
err_user_desc tag, in which we donot free chan->completions
and confused batch->user_completions with chan->completions.
Memleak problem and double free problem may occurs.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Change-Id: I0e588a35184d97cab0ea6b6c013ca8b3342f940a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8432
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
The latest Linux NVMe host (e.g. Linux kernel 5.12) have improved
the quality of multipath but still has an issue such that ANA state
is observed to be invalid even after connection is successfully
created.
By code inspection and system test, initializing ANA state may be
delayed even after connection is successfully created.
We can insert a short sleep but it will be better to retry checking
with timeout. The created function check_ana_state() is applied to
the remaining cases.
This fixes the part of the issue #1819.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifc4eaef7c702d961caeee5bcdc9e6eab4704fc5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8475
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a qpair is destroyed and the qpair is the last,
_nvmf_ctrlr_free_from_qpair() (in lib/nvmf/nvmf.c) sends two messages,
one is for _nvmf_ctrlr_destruct() and another is for
_nvmf_transport_qpair_fini().
We do not know which of two completes earlier.
_nvmf_ctrlr_destruct() frees the qpair->ctrlr in the end.
On the other hand, _nvmf_ctrlr_free_from_qpair() calls
spdk_nvmf_poll_group_remove() in the end, and spdk_nvmf_poll_group_remove()
accesses the qpair->ctrlr to free queued requests to the qpair.
Before one recent change, spdk_nvmf_poll_group_remove() had been called
before _nvmf_ctrlr_free_from_qpair() was called.
Hence extrace the operation to free queued requests from
spdk_nvmf_poll_group_remove() and inline it into _nvmf_qpair_destroy().
Fixes one showstopper error to investigate the issue reported in #1819.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I29c43ff7b289fc77a5de9c33e0266301c412e208
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
For benchmarking purposes, we may want to use a
relatively low queue depth but spread the operations
across a wider range of memory. A new -a option is
added where the user can specify an "allocate depth"
to do exactly that. In this case, more tasks (and
their associated buffers) can be allocated than we
have actual queue depth. Then when we pick a new
task for the next operation, it will use a different
memory range and avoid always using the same buffers
over and over again.
If not specified, we just allocate the same number
of tasks as the queue depth, which is the current
behavior.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I78042d905fd49d130c4a318e2c19eb11b84ff726
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8451
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
When a task completes, always put it back in the task
pool (using TAILQ_INSERT_TAIL) and then use _get_task
to get a task for the next submission. Currently this
will just allocate the task that was just put into
the TAILQ. But an upcoming patch will allocate
more tasks than we have queue depth, and this patch
will ensure all of those tasks get used evenly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia6247a76ba60337fe6da3189e6c305f4dfb0a041
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Previously we would only assign the worker in _get_task().
But future patches will use _get_task() for each I/O,
not just during startup.
Also increment the current_queue_depth during startup
only, rather than every time _get_task() is called.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2713591d36b8353eaab8119ee230261f40857019
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8449
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Previously core load was only considered for main lcore.
Other cores were used based on cpumask only.
Once an active thread was placed on core it remained there
until idle. If _get_next_target_core() looped around,
the core might receive another active thread.
This patch makes the core load matter for placement of any thread.
As of this patch if no core can fit a thread it will remain there.
Later in the series least busy core will be used to balance
threads when every core is already busy.
Modified the functional test that depended on always selecting
consecutive core, even if 'current' one fit the bill.
Later in the series the round robin logic for core selection
is removed all together.
Fixed typo in test while here.
Note: _can_core_fit_thread() intentionally does not check
core->interrupt_mode and uses tsc. That flag is only updated
at the end of balancing right now. Meanwhile tsc is updated
one first thread moved to the core, so it is no longer
considered in interrupt mode.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I95f58c94e3f5ae8a468723d1dd6e53b0e417dcc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8069
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Idle threads are always moved to main core, there are no
other considations. Doing it as separate first pass,
allows to have the core stats be up to date for second
pass for active threads.
Core load stats will be used later in the series to determine
optimal target core for an active thread.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6a9bc11b86e954e461f7badebf3a6e4d1718f63c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be needed when doing multiple passes over
all threads. See next patch.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4e9c749d69314fc268cbcb9334862392100b651e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When picking a path to go down with a thread,
conditions unnecessarily piled up.
Instead do it either of two ways:
- move idle threads to main core
- find best core for active threads and move them there
There is no need to worry about cpumask of the thread,
since _find_optimal_core() will always return a core
within the cpumask.
If the found core is the same one as the current,
_move_thread() won't perform any action.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0f4782766c15c86b5db0c970cfc9547058845b2a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Refactors logic for finding the optimal core for a thread
to single function.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc2b09acb6f698640ce9602fec4f567eb32b79fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Intention was for the threads to contain a single
core in the cpu mask.
This patch fixes it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8276cc906be53a7f8195d61c63bfa54bd2647b75
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8068
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Refactor all thread moves and core stats updates to single function.
At this time in series only tsc of main core was modified and
only idle tsc of main core was used. Main core would be either
the destination core or the source core. In both cases, the idle
time for main core had to be updated.
This patch generalizes this logic to always move the execution
time from source core to destination core.
As a byproduct cores besides main core have the stats updated,
which will be useful later in the series. Once core load will
be the deciding factor for choosing a core.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I57564e8b2632f919869d74e8f10b01fb3dda3be9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6658
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
This script will use the output generated by the spdk_trace app (JSON) and
replace some of the raw pointers with the information gathered through
the DTrace probes.
For now, this only prints out the traces without doing any annotations,
so the output should be nearly identical to what's printed by
spdk_trace. The annotations will be added in subsequent patches.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I406e8d4fde9cb88b31c38aa96f11b88e607e9436
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8105
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Added an option, `-j`, which will cause the spdk_trace to print traces
in JSON format. The JSON output's structure is similar to the binary
SPDK trace format, i.e. tracepoint definitions are printed at the
beginning, followed by trace entries. This allows us to reduce the size
of the output a bit, as we don't need to print all tracepoint properties
for each entry.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I22fd4bee72c0d214a3444ce62d0651fabd489f5a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8104
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The application doesn't do anything useful when started with this
option, so there's no point in keeping it.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I2fca31fc7ccca11fc44a7f9a7a7b83d7634048d7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8103
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It'll make it a bit easier to support printing traces in different
formats.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I33d454868fe7975ce81046823e3a3b9b6f587b0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8102
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will allow to match and compare the DTrace probes with SPDK traces
as they'll be using the same source for the timestamps.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I686c3351428c75f9b618a1a909836504fccad828
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8101
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Now that the trace library can handle multiple arguments, there's no
point in passing 0 for tracepoints that don't have any arguments. This
patch removes all such instances. It allows us to to verify that
`spdk_trace_record()` was issued with the exact number of arguments as
specified in the definition of the tracepoint.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Idbdb6f5111bd6175e145a12c1f0c095b62d744a9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8125
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replaced calls to `spdk_trace_record_tsc(spdk_get_ticks(), ...)` with
`spdk_trace_record(...)`, which does the same thing but is more consise.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib96e0bc0225490dadf857e1ddd2a3ecbf71e98c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8444
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Now that each tracepoint can have more than one argument, we cannot pad
the missing ones, as it would take too much space. Therefore, we put
them at the end of a line and simply skip the missing ones.
Additionally, since empty arguments are no longer padded, this patch
stops recording arguments with names consisting of an empty string
(containing just '\0').
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I5199a3219a31d6afd3178324a4f48563b84e6149
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7958
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that `spdk_trace_record` receives variadic arguments, we no longer
have to pass strings as uint64_t, but can pass them directly as
pointers. That also means that the recorded strings can be longer than
8B (up to 40B).
This patch changes the blobfs code to pass the filenames as strings and
gets rid of the code that converted them to uint64_t.
Additionally, the maximum length of string arguments printed by
`app/trace/trace` has been extended to 16 and they're also padded to 16
characters, to better align with other argument types.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ibe94452bf1b27eba2b15ca8608d0c3b55c2db360
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7957
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch allows tracepoint to record a variable number of arugments.
An additional function has been added,
`spdk_trace_register_description_ext()`, which allows the user to
register definitions for tracepoints specifying all the arugments that
they accept. Users can also call `spdk_trace_register_description()` to
register tpoints with a single argument (or none).
Currently, all of the tracepoint arguments need to be passed as
uint64_t.
The trace record functions use variable arguments and rely on tracepoint
description to know the order and the format of the arguments passed.
That means that the user needs to take care that they're always in sync.
Moreover, this patch extends the tracepoint entry size from 32B to 64B,
meaning that there are 40B that can be utilized for passing arguments,
which in turn means that there can be up to 5 arguments per tracepoint.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9993eabb2663078052439320e6d2f6ae607a47ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7956
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Move the definition of structure spdk_io_channel into
lib/thread/thread_internal.h, so we don't have to update SO_VER for
other libraries in future when we need to change the internal details on
the structure.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I3d2ca7a8737972e0b33ce92e464da42c48f89dec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8189
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If we're not a DEBUG build, vfu_setup_log() was effectively forcing a
libvfio-user logging level of LOG_ERR. Instead, let the log handler decide what
to report, so we can respect the SPDK levels.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: Ib3ad62589f495a377885f7deabaf02b428e83d30
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8452
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is relevant mostly for the VMs. Allocating that much memory puts
a lot of pressure on remaining pieces of the system as currently we
allocate total of 12GB memory per VM instance in the CI pool. Default of
4GB hp should be enough to cover majority of the tests hence if there's
any suite that requires more memory, setup.sh should be called there
directly with an optimal value.
This is done to make sure we can accomodate proper resources in the CI
by knowing what are the actual requirements rather than just blindly
allocating "as much as possible".
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie958c518c7ed702b068c7fc9042183fdf41aa816
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8436
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Fix json config file using strip_size error, and
The strip_size parameter was changed to strip_size_kb in `bdev_raid_create`
rpc function in order to make it more meaningful to users.
Unify the coding style in rpc help file.
using --strip-size-kb --raid-level ... instead of --strip-size_kb.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I341af1034c7ea6716ff839bb524ee733c9e0cd34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8401
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Commit b7cc4dd added support multiple AERs, but didn't
remove the code that hardcodes aerl=0 for non-discovery
controllers. So even though the target now supports
multiple AERs, we never indicate that for non-discovery
controllers.
The spec also recommends that implementations support
a minimum of 4 AERs - so the current behavior is not
recommended.
It seems that at least on Windows (when testing with
vfio-user transport) we see the limit get exceeded
which results in ERRLOGs. Let's keep the ERRLOG there
for now, assuming that once we report we support 4
AERs that Windows won't try to send more than that.
Fixes issue #2000.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6a07a6f37aaa6e531ae2cf1e1c46da036b00785b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8488
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We cannot control what the host may send to the target.
For example, we have empirical evidence that Windows
will send vendor-specific IDs for features and log pages
(when testing with the vfio-user target transport).
So let's change the ERRLOGs in these cases to DEBUGLOGs.
Fixes issues #2004, #2007, #2008.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8d5b92fc5e33d698af246f2f1c34f7cf51e6488a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Rename this function to better expalin what it does.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I7ab84a7cfbe488df8c1681d943f8af74458f5b32
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7389
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch changes how cores, threads and pollers data structures
are connected to each other. This is to ensure consistency and
avoid writes/reads from null pointers when application state
has been altered (e.g. by rescheduling thread to another core).
Fixes#1921.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: If517a7db41c512b27f86598a047df8ed27d3a274
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7769
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change type of core_num to be int instead of uin32_t
to allow assignment of -1 value for the "hanging" threads
that are not assigned to any core.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I708f9547ee4fa2cf49f6c38750e12380d76b1160
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8154
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5120baff8d2de3ef639d7b3c66d51002838c3f3c
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8439
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The RPM page was not referenced anywhere,
only accesible via list of files or direct link.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3a72add1cc2530a73f383ca0c144a551d94083e8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8015
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
1. Update with latest vfio-user specification changes.
2. The new libvfio-user will not expose dma_sg_t data structure
any more, SPDK should use pointer and allocate memory for it.
Change-Id: I619b0c0828cbe3b050c628bff4c4ce7ee840510f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8377
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Community-CI: Mellanox Build Bot
When creating queue pairs, the original code uses a stack
queue variable and copy it to queue pair in insert_queue
function, the coming changes in libvfio-user doesn't expose
dma_sg_t data structure any more, we need to change it to
a pointer and allocate memory for it, so here we eliminate
insert_queue function as a preparation.
Change-Id: Iee94029d24bc8882ec169665e229e6cbc11564c0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8376
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
