Currently, NVMe perf worker starts IO and measurements as soon as all
its QPs were connected. But other workers may still be connecting and
not started their measurements yet. With large number of QPs when
connections take a long time this can cause inaccurate performance
reporting.
This patch adds synchronization point for workers after all QPs were
connected and before start of IO and measurements.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: If0c9be8dd41c8e851aae6b3e71afa3efe5314330
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5126
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The interrupt_tgt depends on vhost lib, so it should not be
compiled when SPDK is not using it.
This resolves compilation errors with just:
./configure --without-vhost
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iad2dff6bb73e1b3d389b98f0dfbf157e576797be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5340
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
While here, replace use of "slave workers" in some
comments with "secondary workers".
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2169c108da18d449a66a29daa77a3f9c3145d4b2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5352
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This helps us remove master/slave terminology from
SPDK and is aligned with similar changes made recently
in DPDK.
While updating nvme/identify to use the new member
name, also replace g_master_core there with g_main_core.
Other nvme utility usage of "master_core" will be updated
in a later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0ec4e3e9b644bec21b3729809bf5c4d35b10837f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5351
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The old pci_whitelist/pci_blacklist are now deprecated.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9fddec0c90691dd385eb21d13be849247f144889
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5279
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a few references to %ld to remove the assumption
about the size of a long.
Where the value being printed is an unsigned 64-bit value, use PRIu64
instead of %ld.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Ifa558522437f4922b922abf17712173cb5ca1184
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5134
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If interrupt mode is set, related poller functions will be
registered to interrupt handler instead of poller.
interrupt_tgt can work as vhost-blk target to support VM.
Change-Id: I3a15f9a63532f44fe0d2f0cb69b0efdd72431d10
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is used to test the allowed pci list feature.
The reason we add in perf because NVMe Device is the typical
pci device. And we also want to make sure it works.
Change-Id: Ic98ddcfecb162ffb74c9bdf3bc9e702633ddd3e2
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3246
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There is no need for an additional function to calculate the max transfer
size based on mdts.
nvme_ctrlr_identify_done() already initializes ctrlr->max_xfer_size
based on mdts, and spdk_nvme_ns_get_max_io_xfer_size() simply returns
ns->ctrlr->max_xfer_size.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I747ff8ac9767eababffc3c7e0b6846029a98b826
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4985
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Simon A. F. Lund <simon.lund@samsung.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Added plugin-option 'initial_zone_reset', providing the option to reset
all zones on all namespaces with the Zoned Command Set enabled upon
initialization.
The default is not to reset. The option is exposed even when the ZBD
plumbing is not available. However, it will then inform the user that
ZBD/ZNS is not supported instead of resetting.
The plugin-option provides a short-term solution to an observed issue
with consecutive invocations of fio exhausting maximum-active-resources.
A longer-term solution would be to add a 'max_active_zones' limit in fio
and ensure that fio does not exceed that limit.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: I65341c028a97657370b315fb298bf97651b9bffd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4949
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Preparation patch for the addition of the 'initial_zone_reset' plugin-option.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: I768fc207b74cfa2a516009e10fc2a4646d06ba72
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4948
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
All zone management receive helper functions (including
spdk_nvme_zns_report_zones()) are implemented to match the parameters of
the zone management receive function in the ZNS specification.
The documentation for spdk_nvme_zns_report_zones() states:
"param partial_report If true, nr_zones field in the zone report indicates
the number of zone descriptors that were successfully written to the zone
report. If false, nr_zones field in the zone report indicates the number
of zone descriptors that match the report_opts criteria."
This matches the description of the "Partial Report" bit in the ZNS spec.
Since the FIO function parse_zone_info() calls the io_ops->report_zones()
function multiple times, until all zones have been reported, it expects
the return from this function to represent the number of zones that were
successfully reported.
By setting the partial_report bit to false, the controller will return
the total number of zones, and since spdk_fio_report_zones() loops until
idx < report->nr_zones, and writes to zbdz[idx], the current code will
overwrite heap memory, since idx will take on index values that are out
of bounds for the memory allocated by the FIO function parse_zone_info().
Therefore, spdk_fio_report_zones() has to set the partial_report bit to
true when calling the NVMe level function spdk_nvme_zns_report_zones().
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I8846711bfed4faadac0315b450158293cefa36f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4871
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Simon A. F. Lund <simon.lund@samsung.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Print the Zoned Namespace Command Set Specific data structures,
if the namespace/controller supports them.
spdk_nvme_zns_ctrlr_get_data() returns NULL for a controller
that does not support the ZNS specific controller data struct.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I0acd2695976fc598b61591989f612db35ac821db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4839
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In spdk_fio_report_zones(), log_err did not prefix messages with
"spdk/nvme", making it hard to determine who dumped the error-message.
In spdk_fio_reset_wp() log_err described the wrong function.
This change fixes the above.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: I41df6d451e88942806c8b5a3cf9a0902d98cb186
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4916
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
When _reset_wp() received a range to reset, then the loop kept resetting
the first zone in the range.
Also, the processing of command-completion were re-using the same
'completion' state, thus a previous completion would short-circuit
command-completion such that it would never be processed.
This change fixes that.
Also, the reset-loop assumes that the given offset is a valid zone-start
LBA, a check is added to verify that and return -EINVAL if it is not.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: I1a1e4be2e1f67c2d8fecb5fc36a211b2dbb5a921
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4915
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
When a device has resource-limitations such as the
maximum-open-resources (mor) and this threshold is exceeded, then IO
will fail upon completion. Such behavior is not the most user-friendly
way to tell the user that they should provide a value for the
fio-parameter 'max_open_zones'.
This change provides an arguably more user-friendly approach by checking
whether the device is limited and in case it is:
* Provide a default value for 'max_open_zones', inform the user, and
continue
* Verify 'max_open_zones' and in case of error inform the user and
return error
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: I76cb045d560b9ec5701d97b82a62947af11960b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4914
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
rc has been assigned to -1 directly, so it's no used here.
Issue:
accel_perf.c:681:7: warning: Although the value
stored to 'rc' is used in the enclosing expression,
the value is never actually read from 'rc'
if ((rc = spdk_app_parse_args(argc, argv, &opts, "o:q:t:yw:P:f:", NULL, parse_args,
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I1d0a4447c4655bde97fa18d50b694809fc9010ea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4825
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Logical volume, blobstore and blobfs can directly run in
interrupt mode.
Some bdev modules don't have pollers, so they can be directly
runnning in interrupt mode.
interrupt_tgt can create lvol bdevs and some other type bdevs
Change-Id: I9ad068393c6ff31bb3aafb3e58a41b0e0aeec9af
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4276
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If interrupt mode is set, related poller functions will be
registered to interrupt_handler instead of poller.
interrupt_tgt can run IO with linux nbd.
Change-Id: I39ecf1efa10be76419fb0d25713ea457a5a53b37
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If interrupt is set, related poller functions will be
registered to thread interrupt instead of poller.
interrupt_tgt can create aio bdev now.
Change-Id: Id777a55c8b7dc7a220f94ab837f7039ecea4fcb4
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4273
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
interrupt_tgt is similar with vhost_tgt, but it is constructed by
libaries supporting event interrupt mode with interrupt functions.
Some basic bdev libraries are linked in it.
"interrupt_tgt -E" will run the app in interrupt mode.
At start, it can work with SPDK RPC methods.
Change-Id: I3a9b253a4657758fc670af835e5bed5e53f412dc
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4271
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently, error handling code in examples/nvme/identify frees the qpair
before calling exit().
However, since every SPDK process starts off by triggering a reset
(in state NVME_CTRLR_STATE_INIT), which causes all the qpairs to be
deleted, there is not really a reason to do a nice cleanup on error.
Additionally, other examples, e.g. examples/nvme/hello_world does not
do a nice cleanup on error, so it is inconsistent if identify does so.
Proper freeing of the qpairs is still done in the normal case where
we don't get any errors (in this example, and in other examples).
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I0db612934464e6e84eaf466c12eb35eaa396e511
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4838
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The printout in read_complete() says "Read I/O failed, aborting run",
however, execution still continues, and prints and prints the buffer
where the result was supposed to be stored.
Since we got a read error, we will not have gotten any data stored
in the buffer, so it is simply confusing to print it.
Calling exit() in the read_complete() error handling code code also
makes it consistent with the error handling code in write_complete()
and reset_zone_complete().
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I6e542758c57efc376f921857c2cdb24e252d49c6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4837
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This adds initial support for ZNS by aligning the NVMe spec. defined ZNS
structures and commands with the fio Zone representation and
implementation of the following io-engine functions:
get_zoned_model() / spdk_fio_get_zoned_model(), when namespace is ZNS
and the Zoned-Command-Set is enabled, then this function informs fio
that the device is ZBD_HOST_MANAGED.
report_zones() / spdk_fio_report_zones(), submits a single
zone-mgmt-recv and waits for its completion, converts the spec-defined
zone-descriptors to the fio ZBD_ZONE representation and returns the
number of zones in the converted report.
reset_wp() / spdk_fio_reset_wp(), submits multiple zone-mgmt-send,
covering the range [offset, offset+length] and waits for their
completion.
Four helper-functions are added to assist in the above implementations.
get_fio_qpair(), this helper is added to retrieve the namespace matching
the given fio-file, ensuring that management commands reach the correct
namespace.
spdk_fio_qpair_mdts_nbytes(), this helper is added to assist
report_zones() retrieve the zone-report within the bounds of the
maximum-data-transfer of the device.
The functions pcu() and pcu_cb() provide a means to submit
management-commands and waiting for their completions. They are needed
since, although mgmt-send/recv are IO-commands in the context of NVMe,
then for fio they are not part of the regular queue/event/getevents but
utilized in a synchronous/blocking manner.
Note, in the fio-zone-representation, then the start/len/capacity/wp
fields are in units of bytes, whereas the corresponding values in NVMe
are in lbas/sectors. It is worth noting as the offset <-> lba
conversions do not take NVMe configurations with extended-lba format
into account. Thus, the implementation is initial support for ZNS as
more work is needed to support pi/extended-lba configurations.
Note, a guard FIO_HAS_ZBD checks for the required io-engine ops version
and indirectly testing for available of fio Zone representation by
testing for a macro introduced in the same fio-release as the required
fio Zone representation.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: Id3d1d61a52db2e55019032c724197df4d559271a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4836
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The struct-accessors are added and named matching the fields defined in
the spec. to be used by the fio_plugin/nvme and other consumers of the
driver-layer. Comments to be consumed doc-generators as well as human
readers of the header-file.
The identify example is updated with the change.
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: I8d6cb82e095c5dcbc06fe892e17ce83dc0062735
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4835
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
gen_nvme.sh will no longer generate the legacy configuration.
"--json" option will still work for any current users of the script.
Tests were modified to no longer use the "--json" option.
Meanwhile others were simplified with switch to "--json-with-subsystems".
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8450be98660e54c64c27d8401fc40d649f9403ea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Support for legacy configuration has been removed from SPDK
at this point.
This patch focuses on adjustement in documentation and examples.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Icfe8baf7a7497ffa86fde9038001429c5a7bc4f6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is a drop-in replacement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia858b755718da97e48035b7e7ca4544f6f9b9a63
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4807
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch removes legacy config from bdev fio_plugin.
Both configuration options are valid, but they should
point to JSON files.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I5ae8102752317fe6da8ae7d0a69f444cb0751efa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3721
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If the namespace is a zoned namespace, get and print a zone report.
Since a ZNS drive can have thousands of zones, request a zone report
containing only the first 8 zones.
The code does take a ZNS drive with less than 8 zones into account,
even though such a drive is unlikely to exist in the wild.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I28ecb4d7c60ab5a911d7b1faae595f43ef6706e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4794
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Use spdk_nvme_detach_async() and spdk_nvme_detach_poll_async() with
a local variable detach_ctx to detach multiple controllers.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I05c504428df56f4ab5d1ffdd19ac81e6c062c89d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4439
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Update a few print outputs to out not product name but bdev name
because bdev pointer is not available there after replacing
spdk_bdev_get_by_name() and spdk_bdev_open() by spdk_bdev_open_ext().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I624fea3a0a12c1049e950bddae8cea9f88b16db5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4702
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If the namespace is a zoned namespace, reset the zone starting at
LBA 0, before doing the "Hello world!" write to LBA 0.
This is done to ensure that the write pointer for the first zone
is at LBA 0.
We need to do this since a regular write on a zoned namespace
to an LBA that is not equal to the write pointer results in a
Zone Invalid Write I/O error.
Therefore, if we don't do a zone reset before doing the write,
the write would fail if there already were data written to the
first zone. (E.g. if the user ran the hello_world example twice.)
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I0ee972b4cc40bc5ebd476105d0b180a07cfe5a76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4683
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a drop-in replacement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I20dc836b4d17770c8164c737e5523ebbf6fb22bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4708
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Similar with existing virtio user driver, we need to enable "--single-file-segments"
option in DPDK as the target only support limited number of memory regions, for
coming vfio-user feature, the requirement is same, so here we enable the option
with identify&perf tools in advance.
Change-Id: I83d78b403a8c1ec0c76a5bf21aac6bed109931c3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4612
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Log flags could also report on SPDK_LOG_INFO level by using
SPDK_INFOLOG() macro. Yet this did not result in additional
log due to check for debug build.
This patch allows release builds to use that flag.
Meanwhile the -L option besides turning on particular log flag
changes print log level to SPDK_LOG_DEBUG.
Applied changes to serveral applications to follow the
behaviour of event framework.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib0d6cce33263c350d6d83300d60e7d15bdfe4b64
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4557
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will make the object relationship cleaner and the asynchronous
detach operation easier to implement.
Change NVMe perf tool in an independent patch to make review easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie9fe4ba097356a9887fc284bb8019664936f3cca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4432
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will make the object relationship cleaner and the asynchronous
detach operation easier to implement.
Change FIO plugin in an independent patch to make review easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If89d189e79506726f2d20cebc100f8a8294b9111
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4431
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
This will make the object relationship cleaner and the asynchronous
detach operation easier to implement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5030dc9eb8f607247f08b4524d37ec2b74826a93
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4430
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We have some RPCs defined in the bdev library itself,
others in a separate bdev_rpc library. There's no need
for the separate library - just move them all into the
bdev library.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I298eedb88924197e64eb315369efb10f402903a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4364
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The poller is now created internally to the library whenever a target
is constructed. Applications are not expected to poll for connections
any longer.
Change-Id: I523eb6adcc042c1ba2ed41b1cb41256b8bf63772
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is important to avoid doubling up on state changes
and hitting asserts.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If8797ea13a5c224cee85e53e9b2542012423b37f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3759
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If ctrlr->cdata.cmic.ana_reporting is 1, set the corresponding
field to true.
Then use its API in the identify application.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4e74bc4c114883e4aecdbee7a6f1a02027db23a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4156
Community-CI: Broadcom CI
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add -a cli parameter to enable warmup stage.
Move ns_ctx statistics-related variable to a new structure
for easier cleanup.
Change-Id: Id536209bc49322f1bc9b5c2296f98f0183b7d4b9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3784
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When using nvme perf program to test against NVME-oF target,
the nvme perf program will hang if we kill the NVMe-oF target.
For example, if we run the following command:
1 On the target side, start a SPDK NVMe-oF target;
2 On the initiator side, we run:
./build/examples/perf -r 'trtype:rdma adrfam:IPv4 traddr:192.168.7.55 trsvcid:4420' -q 128
-o 4096 -w randwrite -t 100
3 Then we kill the NVMe-oF target on the target, the nvme perf program
will hang.
For NVMe perf program, I think that we should check it in
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia864394acdb6e705484dd0db6f015b567eb527a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3774
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes implementation of VPP socket abstraction
along with ways to compile it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I089f7703cfc4fb517f8f80f4368e544bced549b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3734
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When fio wants to shut down a thread, it stops polling it immediately.
Some SPDK threads need to continue to be polled for a period of time
to allow the message passing to all complete, so this behavior in fio
could lead to a hang. Instead, when fio wants to shut down a thread,
place that thread onto a global list that's polled by the init thread
which lives for the duration of the program. The init thread will
continue polling the spdk_thread until it has exited.
Change-Id: I07292d5ba389167c45a14aa8ffbe72b49e88d17d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3682
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This flag only works for local device. If the device from the kernel
is getting from remote (e.g., /dev/nvme2n1 is from NVMe-oF target),
then it will not work for those kernel devices while using
IORING_SETUP_IOPOLL flag.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ide396de9f53b884c4d12af64693293d57fac9523
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3531
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
For performance. Also allocate the accurate number of tasks instead
of just blindly doubling to account for batching.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4e5accfd97477f908368f16d3fc1d8f47896a4d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3321
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
No longer allocate accel_tasks or convert to and from application
tasks and accel tasks.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id2d598d79bebcef522c76c125e65b100266ced57
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3210
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was sort of a clunky interface requiring a couple of inline
functions in every app that wants to use the accel_fw moving
forward. By having the accel_fw public API accept a callback arg
instead of an accel_task combined with adding a pool of accel_tasks
in the accel_fw engine we can eliminate this.
After changing the parm to a cb_arg, changes were made to all accel_fw
interfaces to put cb_fn and cb_arg as the last parms in public and
private function calls.
Related bdev_malloc changes need to be in this patch in order to pass CI.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2b75764e534562d91484a094c3352266156d8425
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3209
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also remove the batching check in accel_perf as all 3 engines
now support it.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib4cf4b148b50df50a4fc7be9e861cc83f355623a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3155
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also one small bug fix w/compare in accel_perf as a result
of changes made in accel_perf sicne base compare was added.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id8e67bd9de9cbd006ac148f4a77807cc3e8e662b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2958
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Also update accel_perf to support it.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ida7b863de02c64239ec4cfbdc3b0235d4e0521f9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2954
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also as a minor drive-by, added verify capability for fill that
wasn't there before, useful in making sure the prep function
was working and really should have been there anyway.
idxd support for prep fill will follow.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib54311c1fb98abd2fb61df6603cf3c5300b71161
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2952
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
When an engine has not filled out an entry point for an accel_fw
function, call the sw implmentation that's built into the accel_fw
transparently.
Also update the accel_perf app to no longer block attempts to use
capabilities not reported as supported by the selected engine but
instead to print an informational message.
The exception is batch related commands as their implementation
is specific to the engine.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I0b3971d075ced20182f97e95147e8887103e68cd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2930
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Includes a few related changes:
* slight refactor to have common prep function for batch prep
commands in the sw engine
* added support for dualcast batching in accel_perf example app
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If9f078a0f8eb509d296e60a94331c92a72f8cb10
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2913
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch uses the IDXD batch feature for initial queue depth loading.
As there is a good amount of code needed to support batching on a per
command basis, this starts with only copy. As other commands are
enabled for batching, they will be added to accel_perf. If batching is
not available, the perf tool will simply submit the initial queue depth via
a loop, the same way it did before batching.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2669936e4da9b31a1d8fa8f0c71e9f5a6fcae412
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2745
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add a new sample application to test I/O abort for NVMe backend,
both PCIe and over Fabrics. And enable it to test pool by NVMe-oF
+ delay bdev + malloc bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5aa28b523bdb2c1d4d8c7af05f925c4dd01dda86
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2661
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch will add the uring support to test kernel based
local devices, e.g., files or local NVMe devices.
To make one binary can support both uring and aio mode when --with-uring
is complied. We also introduce a new global variable g_use_uring to switch
the mode to use liburing or libaio.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I72851168cb377751313d7aa09040ef2a7eb76594
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3214
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We must include nvme.libtest.mk first, because
OS variable is defined in spdk.common.mk referened in
nvme.libtest.mk.
Without this patch, AIO library will not be compiled
because OS variable is NULL.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I760310ab80252237d211a855d18d80ed88119a43
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3217
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There are anbormal cases, from callocated nvme qpairs until
connect io qpairs successfully .
We should free these resources when abnormal exit, and codes
just return there.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I08de9c1fe1757a11a118ebedc326d81e2c68b077
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2985
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_nvme_ns_get_extended_sector_size() is same with
spdk_nvme_ns_get_sector_size() if the drive wasn't
formatted to extended LBA format, but if the drive
was using extended LBA format, it will cause error
without this patch.
Change-Id: Ie845453949c65a9f1d1370227fe3363648f0d0d9
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2934
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There are many log prints such as:
Controller INTEL SSDPF2KX012TZ (PHAC0016001N1P2EGN ): Skipping inactive NS 0
Controller INTEL SSDPF2KX012TZ (PHAC0016001N1P2EGN ): Skipping inactive NS 0
for inactive namespaces, so here we just register active namespaces for tests.
Change-Id: Idbb89c4e5610b4c725dbc211acaefd1897cceeb5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2933
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Before the value was hardcoded, provide it as a user option.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I841a3da266b7ab6e7d71503f2872338d07c8bead
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2139
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Dual-cast copies the same source to two separate destination buffers.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I0535720b2b167ee8191e90998e55c2d5ac4ce6ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2130
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A subsequent patch brought me to realize that I was not checking the
return values from operational calls to the engine. Also, noticed
that on any failure we'd stop submitting IO but still wait until the
timer expired to exist. To match what other perf tools do, now
continue to submit even after an error and run until the clock is
out giving an accurate count of transient failures and successes.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I5e6a0f382f9090e428ee67fbdfb60926e9c85917
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2879
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Calling spdk_nvmf_tgt_accept() now automatically assigns new qpairs
to the best available poll group.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3df2a2c5a28dba45c5ba0cbd1e8c28dd7e56cf9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2813
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This makes them easier to find. They are now named
spdk_nvme and spdk_bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1f6736d8f7f5b9669583731fb0b710ba54f0d50a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2679
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This will open up the way for probing and connecting to
all of the namespaces on a pci controller.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I8fa3dde9f249ce826659882e66f630b8c25e2701
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2779
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As we have done for SPDK reactor, SPDK thread termination needs communication
among SPDK threads. So At application shutdown, create the while loop
until all threads are destroyed and in the loop, check each thread
is exited, and destroy the thread if exited or mark it as exiting
and retry checking after traversing other threads.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7a1008b95f3303de17449d574e917eb47cbe54b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2660
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
I think the main point of having unused qpairs in
the perf application is to simulate the performance
drag of having active qpairs sitting idle on an application.
If we don't poll these unused I/O qpairs, there is no real performance
effect (in terms of cache evictions, wasted cycles or otherwise).
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ie67223eae57a9bfbfaa703a401b0960f88552e11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2008
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We only enable this feature for READ commands in the NVMe driver, so
also ignore the WRITE commands in fio plugin tool.
Change-Id: Iecf43326e1a2a3b3540a1391e09a33d2443bd546
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2730
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This only covered one test case for NVMe reservation feature, so remove
it to test directory.
Change-Id: I7920679ce14dd4d6a9164cb7663016bc7a3a4929
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When testing the application, after release the reservation, the
registrant is still there, so we need to unregister the registrant
at last to restore the drive to a clean state.
Also set the CPTPL to 10b, it means Reservations are released
and registrants are cleared on a power on, we will move the tool
to test/nvme directory in following patch as this is only one
test case for NVMe reservation feature.
Change-Id: I271a61985940958b9f36887f9cd97841841ba2d6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2731
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Optionally let the user specify what % into the buffers there should
be a miscompare if desired.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I3a5524de5e0f7cb91fcf92e76f937bdf280a515b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2109
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
current_queue_depth should have been incremented only if I/O submission
succeeded.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibdcae2d4e8d5b804faaac2392226252c95dfb634
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2586
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add simple periodic round robin poll group migration to the example
application to exercise SPDK thread dynamic scheduling.
Add CLI option to enable the feature manually. Default setting is
disabled, and the period is specified as micro second.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4639e94ce00611a600ff068e754ee6f31905565c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2556
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add the flag, resched, to struct nvmf_lw_thread.
Add an new function nvmf_request_spdk_thread_reschedule() to set
the resched flag of the current thread to true.
nvmf_reactor_run() checks the resched flag and call
nvmf_schedule_spdk_thread() and clear it if it is true.
Enable the thread operation SPDK_THREAD_OP_RESCHED and add
nvmf_request_spdk_thread_reschedule() to the case of
SPDK_THREAD_OP_RESCHED in nvmf_reactor_thread_op().
Following patch will add repeated calls to spdk_thread_set_cpumask()
to exercise the feature.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I60a4213c139b3e6f16ccb7065dea34ffe760de13
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2541
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replace mutex and linked list by lockless ring for nvmf_reactor->threads.
If we create event call, we will be able to keep linked list and
remove only mutex. However, simple replacement of locked linked list
by lockless ring will be enough for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I590a385ff018ad20c7d6752b0a3a5562e3b68510
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2579
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Stop creating the default lightweight thread per POSIX thread. Additionally,
substitute the created master thread into g_init_thread directly as a
preparation to the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I09643491e6b5aaf91d9958481f05e264a2ac5f7d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2542
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Replace spdk_thread_lib_init() by spdk_thread_lib_init_ext() to
support dynamic SPDK thread scheduling in this sample application.
Add nvmf_reactor_thread_op() and nvmf_reactor_thread_op_supported(),
and then pass them by spdk_thread_lib_init_ext().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9498d45d74757d8893b2b415fe28bf65f8fd02d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2540
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By following the SPDK NVMe-oF target application, create and destroy
a lightweight thread per poll group instead of assuming a pool of
lightweight threads already exist at start up time. Each poll group
is only accessed from the associated lightweight thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0a221594d51373237f4ead07a3f5592dbbffa7a2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2539
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
if spdk_thread_poll() calls spdk_thread_create() to create SPDK
thread dynamically, it will acquire nvmf_reactor->mutex and will
cause deadlock because the queue nvmf_reactor->threads is accessed
by any POSIX thread by holding nvmf_reactor->mutex.
If any non-owner POSIX thread manipulate nvmf_reactor->threads by
holding nvmf_reactor->threads, like general priority based scheduler,
running SPDK threads by FIFO will be better.
Change nvmf_reactor_run() to dequeue a SPDK thread from the head, run
it, and then enqueue it to the tail. Release nvmf_reactor->mutex
while spdk_thread_poll() is executed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9b4040cc4d995beaf4a1f9ed8260bb1254d7d7fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2537
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
nvmf_schedule_spdk_thread() is not so performance critical but
should work as designed. Guard the whole operation to decide the target
core by g_mutex. This matches the reactor's _reactor_schedule_thread().
If _reactor_schedule_thread() is refined, change this accordingly too.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9382230577442897d4d2d22b85b1ae4edd77aa98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2536
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: Ieadf271a0c8530f2440cded05ad139483a8c5937
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2383
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is more to exercise the various CRC-32C back ends than anything
else but will calc a CRC on the source data and if -y is
specified it will also calculate SW (ISA-L)f defined CRC-32C and
compare every operation against what the accel engine came up
with using whatever back-end was enabled.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I5ecd3c474717bce4e46d75875a784f888052993e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2073
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The capacity is calculated without single block size.
Correct the calculation.
Change-Id: I039e4dbdfc00f5d29148efc2c2a553535b7daf70
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2367
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: I2a8b70aa92828cf60d168dcf2985759e0eb9a6e3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2217
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Need to check that a valid workload type was specified and print
usage if not.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib956e28f9049e49f19adcc09e861db42034799b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1900
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Recent CMB changes disable using the CMB copy and submission queue
at the same time, so disable use_cmb_sqs by default.
Also spdk_nvme_ctrlr_map_cmb() changed the "size" parameter used as
size of buffer that was mapped, so change it here too.
Change-Id: If957674042b7f4a08e272bf5f9f2ee29f50805cb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1955
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For the purpose to enable the stress test with Bit Bucket SGL,
here we added one new parameters: "bit_bucket_data_len".
For testing it, user should set "enable_sgl=1" and
"bit_bucket_data_len=4096". This means total 4096 Bytes of
data will be described by Bit Bucket SGL, note that the value
should be less than block size specified in the fio command
line.
We will count the Bit Bucket data from the beginning of each
I/O for simplification.
Currently it's only valid for READ test. User can see the
performance improvement when enabled the Bit Bucket.
Change-Id: Ia481a324c25942d6ca051c71cb90f87d21955259
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1623
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Instead of creating an allocator where the driver manages the space,
now, since using the CMB for queues and data has already been
disallowed, just create functions to map and unmap the entire CMB.
The user can manage the space.
Change-Id: I023994deda3b517e14d2ba464c7375bf22b58456
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/785
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Usable with both ioat and upcoming idxd modules.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie25743854aa6a05d1b5f580ea64fb5c7d7c722d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1720
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We will be create fine name for each poller but it will need large
effort. Replacing spdk_poller_register by the macro SPDK_POLLER_REGISTER
will provide better name than function address with minimum effort.
Following patches may improve function name for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If862a274c5879065c3f7cb04dcb5ca7844523e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Community-CI: Broadcom CI
This change will make sure that ioat_perf application
exits with error code 1 whenever there was
no test performed.
Mainly by checking number of ioat channels available.
Other changes made to align with returning 1 on error.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id94fa947fd097d5085285d3348aeb41ff280e731
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1672
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This change will make sure that verify application
exits with error code 1 whenever there was
no test performed.
Mainly by checking work_fn return code.
Other changes made to align with returning 1 on error.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I28a36dd5d5adb50bb4f54b1cc724c80da96af564
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1671
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
In show_blob(), value_len of xattr contains terminator '\0',
which is printed as '.' when calling spdk_log_dump().
For example, we set key/value pair as <key1,xattr value>, we get
"xattr value." but not "xattr value" when showing blob info.
Skip '\0' will fix this.
And "data[BUFSIZE]" seems redundant here, remove it.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: I4e7c3276e51f14badf43b660b80b24ae85bb0900
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Following patches will require thread termination so that thread_exit()
will move thread to exiting, thread_poll() will move thread from
exiting to exited, thread_is_exited() will detect the threadis exited,
and then call thread_destroy().
So change all places as a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b2e8aee5ed7cd160a88b4c9aaed7d90bd9dac07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1640
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
FIO in our scripts is usually run as follows: (more or less)
fio_bdev /path/to/job.fio --spdk_json_conf=/path/to/spdk.json
--filename="$(discover_bdevs /path/to/spdk.json --json)"
The bdev names are usually hardcoded in the json config, but still,
they have to be provided to fio again. Not anymore - just use
--filename=* and FIO will use all available bdevs as I/O targets,
just as if all filenames were provided.
The above command could be now simplified to:
fio_bdev /path/to/job.fio --spdk_json_conf=/path/to/spdk.json --filename=*
Change-Id: I56a02e56877b138429d68fb24f1a383c6700c4f4
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Commit 8c1d107 added a new erase API and renamed the original
API with "secure_" prefix according to the specification, as the
secure one will not cryptographically erase user data, due to
the limitation from the drive, only the secure API can be
supported, so changing the caller to use the original again.
Change-Id: I25cb054e728065d9ae9c6c30aa0ab374d60cf6f6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In spdk_fio_setup when the connections are too many,
for example 16 subsystems, it would take too much time to
complete the probe. And it takes the mutex that makes the
poll_ctrlr function can't send the keep alive cmd which
causes the target timeout. Split the mutex so the poll_ctrlr
has the chance to sent keep alive.
Fixes issue: #1286
Change-Id: I300513b5e8761d9eaadb4c5cbc8ed97fe84d02df
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1407
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Actually we can just use one API to finish the requirement.
Change-Id: Ia0d3d589755e8c92f636d3d090ec642299511401
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1280
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The APIs even don't have a chance to be called if the drive can't
support OPAL feature, so just remove the NULL check, and we will
store level 0 discovery descriptors after initialization, so
spdk_opal_cmd_scan() isn't necessary here, remove it as well.
Change-Id: I24f12f2c352996d9ebe76dc015cd0b7502798359
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1231
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next patch will create poll group threads dynamically for
NVMe-oF target, and will need to wait for completion of poll group and
I/O channel destroy. This is a preparation for the next patch.
Add callback function and its argument to spdk_nvmf_poll_group_destroy(),
and to struct spdk_nvmf_poll_group, respectively.
The callback has not only cb_arg but also status as its parameters even
if the next patch always sets the status to zero. The reason is to follow
spdk_nvmf_tgt_destroy's callback and to process any case that the status
is nonzero in future.
spdk_nvmf_poll_group_destroy() sets the passed callback to the passed
poll group.
Then spdk_nvmf_tgt_destroy_poll_group() calls the held callback in the
end.
This change will ensure all pollers are being unregistered and
all I/O channels are being released.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb854066a5259a6029d55b88de358e3346c63f18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Supports SW accel engine, CBDMA accel engine and eventually the DSA
accel engine through common API. Basic functions only are included
here, subsequent patches will add more features as needed. For
example, the verify function is very crude right now.
Tool output was compared to the ioat perf tool w/CBDM and results
are very close although there a small penalty for using the
framework.
For CBDMA, start the app with --wait-for-rpc and run the ioat scan
RPC with desired whitelist. If there are not enough channels
(channels are not a concept in the framework) then SW accel engine
will be used for cores that could not get a channel.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I9c5ab33e74db7bdbc5bfe5d7a08cc7ffaeab625b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/883
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The macro is defined by the spec, so place this value to where
it should belong.
Change-Id: I23f91662fd4ab279aa4285212fc8cbd2ed42245b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1126
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since the OPAL here is just for NVMe device, so we don't need to use dev_handler as common
handler, just rename it to spdk_nvme_ctrlr. And we don't exit the initialization if
OPAL construnction had a failure. Also move the timeout initialization to construct().
Change-Id: I11f0aea961eaa3da0c6253eb03d0227f7e7e5f11
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1101
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
No actual logic change except re-define some data structures.
Change-Id: Id0a483071591beee675cbc3ef368ac1fb723cfe0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently an option is implemented to monitor a correlation between the
core and namespace.
Previously:
==================================================================
Device Information
RDMA (addr:1.1.75.2 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0:
RDMA (addr:1.1.75.2 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0:
==================================================================
Now:
========================================================================
Device Information
RDMA (addr:1.1.75.2 subnqn:nqn.2016-06.io.spdk:cnode1) NSID 1 from core 0:
RDMA (addr:1.1.75.2 subnqn:nqn.2016-06.io.spdk:cnode1) NSID 2 from core 0:
========================================================================
Signed-off-by: Alla Kiseleva <c_allaki@mellanox.com>
Change-Id: I35e39c62bbdac05152f35e11eb1d560eb0e50404
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/955
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These parameters can be enabled using -A (ack_timeout) and
-R (retry_count) cli options
Change-Id: I0c262f93c664a69aa952d6926fd7b0d02acf9e30
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/503
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
On newer versions of FIO, there is an issue with heavy verify workloads
where one of the headers (rand_seed) gets incorrectly generated by fio
during verify. This can be circumvented by using the verify_backlog
flag.
This is needed because it will enable testing this workload on the tcp
transport using fio in the SPDK test pool.
Change-Id: I028be3fdb72a76733b4226a37b6332cd45d0f774
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/988
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Meanwhile, checking new gerrit for committing a new patch.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: I33c0f5bf5b13a147777a9831c9c6e6079b90590f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/999
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The copy engine library, modules and public APIs have been renamed.
Use of the word `copy` has been replaced with the word `accel`
short for accelerator in preparation for adding new capabilities
in the future. Additionally, APIs for what was previously called
the `memcpy` engine have been renamed to identify the engine as a
software accelerator.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia607aa718416146fbba1e6792b8de0f66bd8a5de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
MD026 Trailing punctuation in header
This rule is triggered on any header that has a
punctuation character as the last character in the line
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3ab4894092ef6b5f920d89b74e43c2e46e9581c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/657
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
MD022 Headers should be surrounded by blank lines
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I768324b00fc684c254aff6a85b93d9aed7a0cee5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
MD003 - Header style
Triggered when inconsistent header styles are used accros file.
Also adjust other headers in file to fix
MD022 - Headers should be surrounded by blank lines
MD025 - Multiple top level headers in the same document
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1937abc0d29dc8a21a8eac54d0af2427ebf95bdc
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Make the two non-global conf variables global (this will be needed when
we switch to the app framework) and only assign globals with an initial
value if that value is Non-zero.
Change-Id: I141c32cb2eb614861f62ec6a7662252a33a101ec
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is preparatory to switching the application over to using the app
framework which will require us to avoid any overlap between the app arg
string and the other arg string.
Change-Id: I692d4ec9d078acfc4c28aa7b0f40c0acd7c8af12
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If set, SPDK will continue loading the JSON config even if
some commands caused an error. This can be useful when loading
RPC config from spdk_tgt into e.g. bdevperf, which supports
only a subset of RPC commands and would usually fail with
"Method not found" message.
Resolves#840
Change-Id: I070fea862fd99e5882d870e11e6a28dc9d0c8ba6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This option is used to make hello_sock can use the
designated sock implementations. We need this patch
since we will provide another uring implementation.
So better to pass the name. Otherwise if the users have
many different implementations, VPP implementation
could not be the highest priority for test.
Change-Id: Ibb3862e9e6588743ec9c01074904ed4f7c9c06a5
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/478
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
the workload parsing didn't need to be that complex.
Change-Id: I28627a430834eb48a7c3921ac655d80e348c66ea
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/755
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function was just a wrapper for a one line call.
Change-Id: If91338f917a110fda2493da4022c0a18281418ca
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/754
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Added spdk_vmd_fini(), which detaches all PCI devices acquired by the
VMD subsystem.
Fixes#1148
Change-Id: I43218ef5f9a764546b655c28688897fb91b779cb
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482852
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added new configuration option to bdev fio_plugin
called 'spdk_json_conf'. When provided the SPDK
subsystems are loaded using this JSON configuration.
Only single type of configuration can be provided at
a single time.
While here, added bdev_rpc in Makefile to support all bdev
related RPC that can now be issued via json config.
Change-Id: I5f45fe2d8331034ef4becca43bbaedebd6b20c5a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463979
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Remove the config file check explicitly preventing hello_bdev
from starting and also update the docs not to reference config
files at all.
Change-Id: Ieefb629ef16d75a43c2c1fad2ac442f6e37cc16d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/483386
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Previously we only initialize the DIF context when PRACT is 0, because
the DIF library can only support that case, but when end-to-end data
protection feature is enabled and PRACT is set to 1, the controller
will help to check the metadata, but we still need to pass
appmask/apptak to controller. This patch will fix this case.
Change-Id: Ia62d4f8a7adf822b75541f69ce57aeff8f9eb505
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482047
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Hello_blob example was never run before in autotest.
Change-Id: I1f858bed816471efed947f06107cec981dd562a4
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481570
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Purpose: With this patch,
(1)We can support using different sock implementations in
one application together.
(2)For one IP address managed by kernel, we can use different method
to listen/connect, e.g., posix, or uring. With this patch, we can
designate the specified sock implementation if impl_name is not NULL
and valid. Otherwise, spdk_sock_listen/connect will try to use the sock
implementations in the list by order if impl_name is NULL.
Without this patch, the app will always use the same type of sock implementation
if the order is fixed. For example, if we have posix and uring together,
the first one will always be uring.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic49563f5025085471d356798e522ff7ab748f586
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478140
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This new api function will enable us to work with custom transports.
This is needed to enable properly parsing and comparing custom transport
IDs that may all resolve to the same enum value.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I26aa3cb8f76f8273f564799d9b2af8041ea0d219
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When the call to spdk_subsystem_init returns synchronously, calling the
callback results in double iterating over states in the state machine.
Returning after calling spdk_subsystem_init allows us to reliably begin
executing after the callback function is executed with no double
execution.
Change-Id: Ieb9003acece7483c956f19be4f131c8d4f64fbaa
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/480007
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Add the same handler for SIGINT and SIGTERM so that
the working thread can exit.
Change-Id: If1ce617ddd778e92bed6f95089c48caf841e256f
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468661
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add fc library path if FC transport is configured.
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Change-Id: Ifca51aed9cfde6fda347bbe9e331026bd7246a97
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478771
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There's one left has not been changed.
That's be ignored ever.
Change IO/s to IOPS.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: I1555cc02644b238e8d4fece31f932a480c20121d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478399
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
use the nvmf lib to add an nvmf example which
doesn't use the spdk app framework. It can show
how to use the nvmf lib to build your own nvmf target.
We encouage you to use the RPC cmds so this example will
not supply the configuration file. You can read the
README.md to get the steps how to build your nvmf target
and test the IO status.
Change-Id: I8d175934f7364d40fb44d36e85c31d8ea5063654
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468457
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
The OS defines in the spdk.common.mk. nvme.libtest.mk include
the spdk.common.mk.
Fixes the issue #1106
Change-Id: If37e0f6508ce116a4df6d96d72bea0c693fb53a5
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477449
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
'delay_pcie_doorbel' parameter in 'spdk_nvme_io_qpair_opts' structure
was renamed to 'delay_cmd_submit' to make it suitable for every
transport. Old name is also kept for backward compatibility.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I09ef8028133c4a3d4a5bbc5329ced1f065bcaa46
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Whole autotest fails on VM Fedora31
GH #1081
Fio version update to fio-3.15
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I3b91c426050eb30af6b58434b6219090c61a48ba
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476893
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Make sure we don't crash or do any other bad memory accesses when we
fail to connect to a discovery controller.
Change-Id: I7c3e25899bc78f4beff9ad017612bacf286d52c7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474153
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There was an assignment in perf that prevented the user from actually
disabling keep_alive. If the user specified 0, it would get overridden
by the default opts value. So set the global in perf to a reasonable
value, and always use that value when setting the keep alive timeout.
Change-Id: I2eba14525613d679d7def29cc9ed312851cae156
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473059
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is sort of like the periodic stats that fio
prints every second or so. We can add more to this
later, but this by itself is a nice improvement I
think.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4ac588c8301bae9924dd6541cbc386ffe8d06b5d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473339
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When initiating the io_u strcture from FIO, always
set the engine_data to NULL first as the io_u structure
is just malloced from FIO without specifically setting
to zero.
In the io_u free path, the engine_data field is checked
whether to NULL or not. To avoid mischeck issue, explicitly
set the engine_data to NULL at the beginning of the io_u
init path.
Change-Id: I52c8c251f36925650a44d14e35781bd8494ff358
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472916
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will be used in a future patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie88daa20842f5f166b4a7a5abccafd6683d6da64
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473338
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
There's little use to the "Starting thread on core XX"
messages - they may have served a purpose at some point,
but the other messages showing where each controller
is associated is sufficient.
Also remove the "Attaching to..." message - the
"Attached to..." message is sufficient here too.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9543e8f3f6d7b6e28238cba27fc1e4194908f3b7
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473337
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
The core number may be 1 or 2 characters, and the
printf format wasn't accounting for that.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3c87466df1014fb6c0a4e7db1a9b6f6054559eae
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
When we specify a queue depth that may be higher than
the io_queue_size, we print a warning indicating this.
But it was also setting the g_warn flag which would
result in this message also getting printed:
WARNING: Some requested NVMe devices were skipped
But we don't actually skip any SSDs in this case. So
remove setting of that flag in this case.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic63209f1a96990dac9664ce245c6406c37248494
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473064
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Modifying the target_disconnect.sh test to include an example of
transport_id failover for an NVMe-oF controller.
Change-Id: I746ed737ab56c7dec6ee99e840c631ba46ee359e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472230
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is simply a dumbed down version of perf so that we don't add extra
functionality to perf that might impact its performance.
Change-Id: Ia2716a61abcc5269dafcda394d40517d156fdb2a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471661
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added application allowing for probing and changing the state of the
LEDs of the devices behind the VMD.
Change-Id: I6c513c556d8e3de8ecf9b5783d7c66ac3b9c6a71
Signed-off-by: orden smith <orden.e.smith@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470652
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This example application only enumerated VMD devices but didn't do
anything else. Now it goes over all PCI devices and prints those behind
the VMD.
Change-Id: I6134088e820a90c203200294540cb8174b1a492e
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
