When a request is submitted, it may have incorrect iov
alignment that doesn't fit PRP requirements. In the
current version an internal function fails such a request
and returns a NULL pointer. This is mapped to -ENOMEM
error which is returned to generic bdev layer where
such a request is queued in a "nomem_io" queue and
later can be resubmitted. That is incorrect and such
a request must be completed immediately. To fail the
request, we need to differentiate between -ENOMEM and
other cases, so we pass a pointer to a result to
local nvme functions
Change-Id: I7120d49114d801497a71fca5a23b172732d088de
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7036
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function will be used the next patch, current
behaviour remains unchanged
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie74c7395f67a08b0cac018eb5114f358a6b583cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7092
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The max_io_size transport option should be a power of 2 and be >= 8KB.
Max data tranfer size is defined in NVMe-oF spec as 2^(mdts cmd field) * 4KB.
Mdts cmd field is calculated as spdk_u32log2(transport->opts.max_io_size / 4096),
so max_io_size < 8KB results in mdts=0, which means no size limit (according to spec).
User can set max_io_size = 0 explicitly to allow no size limit.
Signed-off-by: Maciej Szulik <maciej.szulik@intel.com>
Change-Id: Id88a77efce5f217e1fc7750f61c0bd330aaa3791
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6384
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The dbdf format is xxxx:xx:xx.x and with the wrong
format the rte_devargs_parse always fails.
Change-Id: Ia34bc5e68f6401bb25907d5d07c65636b4f491b5
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7140
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
We can send a message to repeat subsystem pause
and free a context that will be used later
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ia5e8b0ff43f5e38bd8e659a8a64d42926e1d3c6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6661
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
With this change, each polling group will use one
accel_engine channel. This change will be more suitable
to utlize the underlying accelerated device.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ibab183a1f65baff7e58529ee05e96b1b04731285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7055
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Actually we already do this when removeing a memory region, but
the check for it is too strict, we should unmap queue pairs when
the queue pair is in the memory region.
Change-Id: Ia646a0255e32ecdd0a70537a8011ce622eb59195
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6861
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The error response should be processed at the beginning of this
function.
Change-Id: Id583951c82981cf58984ab68b23ad6f7ea80cd3f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6859
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When starting VM, there are error logs such as:
vfio_user.c: 510:acq_map: *ERROR*: Map ACQ failed, ACQ 3ffde000, errno -1
vfio_user.c:1043:map_admin_queue: *ERROR*: /var/run/muser/domain/muser1/1: failed to map CQ0: -1
vfio_user.c:1103:memory_region_add_cb: *NOTICE*: Failed to map SQID 1 0x3ffd8000-0x3ffdc000, will try again in next poll
This isn't the error case, because when the Guest memory hot add/remove from QEMU, vfio-user
target will stop and unmap all queue pairs and remap them again, so let's use a more friendly
log instead.
Also use a notice log when adding listener.
Change-Id: Iaa4dc29e02523b5e85ec716d200ec355f8a575ed
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6650
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add support in bdev_zone.h for getting the maximum zone append data
transfer size.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I61203e64d51601232c6578a090fa52975364c1f3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6910
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The specification for Maximum Data Transfer Size (MDTS) says this field
should include the length of metadata, if metadata is interleaved with the
logical block data. However, some drives can support MDTS without counting
the interleaved metadata, so for this case SPDK will only use data length
without interleaved metadata length.
Change-Id: I29920a25885699e2689be043b87122367be0e416
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6813
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Although the value stored to 'rc' is used in the enclosing
expression, the value is never actually read from 'rc'
Fixes#1860
Change-Id: Id1001552e635968e373cad0fd27d7bda41d887cd
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7082
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When param len > 0, param data must not be NULL.
So we add a comment to make it clearer.
Change-Id: I053c3e45ddb8fa23fb67ce899d32dadd8e286946
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6618
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Remove the polling group check. Because at this moment,
the qpair is not added into a polling group. If we do
not remove it, we will never enable zcopy feature for
I/O qpair.
And in sock implementmentation, we already fixed the zero copy
handling if a socket is not in a polling group. See
posix_sock_flush function. So we can fix this issue if we directly
remove this check.
Reported by: Aleksey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I969936c4b6c7f13cbfa4d6eb479010c53f3e384a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Add print to confirm how groups/queues/engines are being
programmed based on the init RPC used.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ic9462c19c6899478a803433f90d9db9249dd5ca1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6325
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
DPDK has added APIs for registering externally allocated
memory regions. Use them instead of doing our own thing.
We have to postpone spdk_mem_unregister call in
memory_hotplug_cb() because SPDK mutex (g_spdk_mem_map_mutex)
and DPDK mutex (memory_hotplug_lock) may overlap
and cause deadlock when one thread is calling spdk_free()
(locks memory_hotplug_lock first and then tries to lock
g_spdk_mem_map_mutex) and another one is calling
vhost_session_mem_unregister() (locks g_spdk_mem_map_mutex
first and then tries to lock memory_hotplug_lock).
Change-Id: I547b4ffc3987ef088a1b659addba1456ad760a71
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3560
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: The default value of placement_id in spdk_sock
should be set to -1 in spdk_sock_connect_ext. If we still let it to 0 and call
sock_get_placement_id for the spdk socket used in the initiator side,
we will never get the correct placement_id when enable_placement_id configuration
is configured, because we will always get placement_id = 0
instead. And the same comments in spdk_sock_accept function.
And this patch also change the judgement of placement_id in other related places.
PS: Why we need to explictly set default placement_id = -1, because when use
"enable_placement_id=2" for the socket, placment_id=0 is a valid value.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9fcc3a1c6a5007c22d11da5aeed0022577652a76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6955
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
nvmf_subsystem_remove_listener RPC handler may fail to remove
the listener (e.g. it doesn't exist) but in eror case we
spdk_nvmf_transport_stop_listen_async and send an error
response. In a completion callback passed to
spdk_nvmf_transport_stop_listen_async we try to send a
response again but the response handler had already been
released and we dereference a NULL pointer.
The fix is to skip spdk_nvmf_transport_stop_listen_async
in error case and continue with the subsystem resuming.
Fixes github issue #1821
Change-Id: I8d96b943cca25d9f95d19e8ea600242f019e6b21
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6699
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Updating thread stat directly in spdk_thread_poll()
will cover the time spend in msg process in interrupt
mode.
Change-Id: I9b71790281f10fb784ef4fd4059c41438bbaabac
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6722
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
thread_interrupt_msg_process is registered to thread's
fd_group, so it will be called inside spdk_thread_poll.
Since spdk_thread_poll will set/restore tls_thread,
there is no need to set or restore it again here.
Change-Id: Ida10c736ef904ff975eeb42fd0cccad9fd8317cf
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6720
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Move get_rusage directly into reactor_run(), then both
poll mode and interrupt mode can check rusage info.
Change-Id: Id5926752cfb19c13cb969fbfbb35f643e5d49d9a
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6718
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
In interrupt mode, reactor spends its valid cpu cycles
to process registered thread interrupt function. So we
can count idle_tsc and busy_tsc in it, and update
reactor's last_tsc in it.
Change-Id: I65f4ae7d3b1e5c7c5c06937d6855f5d1b5c0349f
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6716
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
When we iterate qpairs that belong to a subsystem
and try to disconnect them, there is a chance that
some qpair can be disconnected on transport level,
e.g. the initiator may receive a disconnect for
the first qpair and disconnect others. That may lead
to a dead loop when we call spdk_nvmf_qpair_disconnect
with a callback, the callback is called immediatelly
and tries to disconnect the qpair again.
To solve this problem, move part of nvmf_poll_group_remove_subsystem
function to another function nvmf_poll_group_remove_subsystem_msg
which disconnects all qpair at once without any callback
and calls itself via thread_send_msg untill all qpairs are
disconnected.
Fixes github issue #1780
Change-Id: I1000cda73e6164917fc13f7f374366af90571b99
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6597
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The NVMe Zoned Namespace Command Set Specification has, in addition to a
Max Open Resources limit, a Max Active Resources limit.
An active resource is defined as zone being in zone state implicit open,
explicit open, or closed.
Create a function spdk_bdev_get_max_active_zones() in the generic SPDK
zone layer, so that this limit can be exposed to the user.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I6f61fc45e1dc38689dc54d5649c35fa9b91dbdfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6908
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This change refactors the way nvmf_get_stats RPC works.
The RPC layer passes JSON write context to custom dump function defined within transport ops.
The RPC layer no longer needs to know the structure of transport poll group statictics.
Functions and structures used in the previous flow have been deprecated and will be removed.
JSON returned for RDMA transport should be the same as before this change.
Signed-off-by: Maciej Szulik <maciej.szulik@intel.com>
Change-Id: I03308c45be120793d316bf79814a1295afd9fb95
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6681
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Current update_core_mode is started from the next
core of the master core.
For futher's new scheduler, starting from master
core is required. This change won't impact current
schedulers' behavior.
Change-Id: Ibffd2c93a4288b5e87945ae523ccba88091c4031
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6757
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_nvmf_tgt_listen() is deprecated, so moved
the remaining instance to spdk_nvmf_tgt_listen_ext().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I32b54e99f83fa10f1074f80aad82bb0608c9ae11
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6630
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This API has been deprecated since SPDK 20.07,
see commit (b2947f52).
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idb45906c81ea5682c6a67def0265910266d861b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
This patch refactor the pdu sending logic with the async manner,
then if the group contains the accel engine, we can use it.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I2d669c0a3255d7a8898441e406906add2f3a3556
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6759
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Purpose: To setup an accelerated function callback
for created spdk_nvme_poll_group. In this patch,
we just create the interface. The real usage of this
call back will be provided in the other patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I0d936aa4eba4dbfcc0137942156b9f2919eb5b78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6758
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It is invalid to try to delete a NULL qpair, so do
not check for it in nvme_tcp_ctrlr_delete_io_qpair and
return an error when NULL. Just change it to an
assert instead. This makes it consistent with pcie
and rdma.
While here, add an assert in rdma as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic2f76deecb21b78749dac85e33fb1fa0d14a1239
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6917
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
spdk_bdev_io_complete_nvme_status() had set the bdev_io status to
NVME_ERROR even if it is aborted, i.e, sc is ABORTED_BY_REQUEST.
Fix it to ABORTED, and verify the fix by unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b22547105a6d7986747053f93875854336959b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6884
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
These three goto cases are using device->fd,
so put them in cleanup, it has no impact on
vfio_user_dev_setup failed.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I28028dda2977cf8158e703afa5b8af38c48f3d85
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6922
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I191ad5e3b153fb563256eba1aa695716f66db788
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6377
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is an internal API used in several places. The call can fail, so
make sure it can report that correctly.
Change-Id: Iac0ed2c8299c9dd3d2556070278a2224c3807b7b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6640
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is possible that nbd pthread is created but not executed,
then spdk_nbd_stop is call before nbd_pthread's execution,
but nbd pthread starts to execute while nbd is totally stopped.
This patch can get spdk_stop_nbd aligned with nbd pthread.
Change-Id: I57cc92b94d36cd706616c9058134f716f0812892
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6278
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
This is better naming to represent their usage.
retry_poller and count can also be used to do
async nbd_stop procedure in the following patch.
Change-Id: Ie5a74e4add3f1a6c7257df00aded8b5d52a09955
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6277
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_vbdev_register() was deprecated in SPDK 19.04.
config_text field in spdk_bdev_module was deprecated in SPDK 20.10.
spdk_bdev_part_base_construct() was deprecated in SPDK 20.10.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib795ccdf61154c168032ccf8b81ea77e5e663851
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6628
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This statistic is incremented when we don't reap
anything from the CQ. Together with the total number
of polls it can be useful to estimate idle percentage.
Change-Id: I61b51d049b0bc506fb8a896e225187e46e75a564
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6295
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Leverage SO_INCOMING_CPU to get the CPU affinity of connections
(sockets). And allocate the connections to specific poll groups,
which aims to utilize cache locality.
From our test:
6 P4600 NVMe on target,target uses 8 cores, NIC irqs are bound to
these 8 cores, and initiator side uses 24 and 32 cores,
we can get 11%~17% randwrite performance boost for posix, and 8%~12%
for uring.
Change-Id: I011e0a21502c85adcccd4a14fbe9838b43f54976
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5748
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The shadow registers need to be zero when the qpair is
created. This happens automatically when a given qid
is used for the first time, since the page is allocated
with zmalloc. But if a qid is reused, we need to make
sure its shadow registers are cleared *before* we create
the qpair again with the same qid.
So clear the registers in nvme_pcie_ctrlr_delete_io_qpair,
just after the cq is deleted.
Fixes issue #1795.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I08c30d1ea248559a01b802cd132dd57199b491b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If the iov_len is 0, it is OK for the iov_base to be
NULL.
Reported-by: Yi Ren <yunye.ry@alibaba-inc.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I45c9be68fc2975bf2abd91a9d77935ce516c5210
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6706
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Previously we only process Read/Write/Flush IO commands, we should
not block the DSM command in vfio-user layer if the backend block
device can support it.
Change-Id: Ia6b90397adcc36015f331f011a5bdf3e3d6562d8
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6525
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
max_delay_us was deprecated in SPDK 19.04.
config_file was deprecated in SPDK 20.10.
master_core/pci_blacklist/pci_whitelist were deprecated in SPDK 21.01.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie8be4c347de58044a7c3d5b1329d96e47ce084b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously the callback parameter for this function is NULL, this will
cause segment fault, so pass the correct parameter here.
Fix#1817
Change-Id: Ie768b7bf4a72862d16a44742ab3032803d0939a2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Community-CI: Mellanox Build Bot
