Refine ANA state from per subsystem listener to per subsystem listener
per ANA group.
Add an array of ANA state per ANA group to subsystem listener. The array is
indexed by ANA group ID - 1.
Then in I/O paths, we get ANA state by
ctrlr->listener->ana_state[ns->anagrpid - 1].
The NVMe specification indicates the existence of NVM subsystem specific
ANA state when FFFFFFFFh is specified as NSID for the Get Features
and the Set Features commands. For these, we return the optimized state.
Update the nvmf_subsystem_get_listeners RPC to return all ANA states
of the underlying ANA groups. The nvmf_subsystem_get_listeners RPC is
not matured and not used in the test code yet. Hence compatibility is
not high priority.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia2d4d5361ac01236f595c22765fd35e4c5fdee0e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9064
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the first patch in the patch series to control ANA states not only
as a unit of subsystem listener but also as a unit of ANA group and create
user preferred mapping between namespaces and ANA groups within a single
subsystem.
This patch adds anagrpid to both spdk_nvmf_ns and spdk_nvmf_ns_opts, and adds
ana_group array to spdk_nvmf_subsystem to count number of namespaces per ANA
group within a single subsystem. The size of the ana_group array is equal
with the size of the namespaces.
For each subsystem, allocate ana_group array regardless of the value of
ana_reporting of the subsystem.
For each namespace, at its creation, initialize anagrpid explicitly to be equal
with nsid by default and increments the corresponding entry of the ana_group
array of the subsystem regardless of teh value of the ana_reporting of thee
subsystem.
Hence the contents of the created ANA log page is not changed even if the
algorithm to crete ANA log page is changed.
Additionally this patch adds a unit test case that one ANA group
has multiple namespaces.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I78539db4e7248c2953c6927ff8128cb5a7e34b96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9102
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If a response is returned prior to _nvmf_request_complete being called then the cid in the response is
not set correctly and the PDU state is not reset which causes a hang and the PDU state machine is
expecting more data but none will be sent. There are two cases where this can occur:
1) If the request is bi-directional
2) If nvmf_tcp_req_parse_sgl returns an error (e.g max_io_size exceeded)
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: Icc3ed02a4499a12d8920e6433a746b72022a72fe
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9327
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If NN is very, very large, this allocates too much memory. For now, just
use a list.
Change-Id: I904977673d8fb6c86f03c94ba798c6cc07f4a4d8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9301
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This can be done immediately after receiving the controller identify
data for now.
Change-Id: I527a44c4d1f4d3ad2eeb8fc77e07086c2358cac3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9300
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As far as we're aware, this is not in use by anyone. OCSSD has largely
been replaced by ZNS and no OCSSD drives made it to the market.
Change-Id: I020ee277da5292f8c4777f224acafd87586f8238
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch cleans up the header file, structures and
parameters of governor API. While documenting the
functionality.
- made governor name const
- renamed _spdk_governor_list_add() to _spdk_governor_register()
This is preparation to making this API public.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie394109c839dead0e7ade946f95be8105b00e674
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch cleans up the header file, structures and
parameters of scheduler API. While documenting the
functionality.
- made scheduler name const
- removed typedefs for schedueler callbacks
- balance() now accepts uint32_t for array size instead of an int
- removed unused _spdk_lw_thread_set_core()
- renamed _spdk_scheduler_period_set() to _spdk_scheduler_set_period()
- renamed _spdk_scheduler_period_get() to _spdk_scheduler_get_period()
- renamed _spdk_scheduler_list_add() to _spdk_scheduler_register()
This is preparation to making this API public.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia7b6b6a5eafb052ac275db6c04113a8ad442383f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8842
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By default g_governor is now NULL. It can be set
either by event framework or schedulers directly.
Dynamic_scheduler and gscheduler specifically want
to use the dpdk_governor, so their initialization
now sets it explicitly.
To unset and deinitialize current governor,
_spdk_governor_set(NULL) has to be called.
This results in moving governor deinitalization to that
call too.
The "default" governor has been removed.
Every spdk_governor callback is now mandatory.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ibf76bd28bfbb159416026996fa217bb3325a3d31
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8810
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
There is no explicit need for the spdk governors initialization
to occur on per core basis.
This implementation detail for dpdk_governor is now hidden
in the init/deinit calls. There is no recourse when failing
deinit for a certain core, so ignore the return code.
Changed return type for deinit in governor and scheduler to void.
While here modified the callbacks for scheduler to no
longer require passing currently selected governor as an argument.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7f0b7a09aa7f5d12ae47fca25186faeedac31a95
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8791
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
bdev_nvme_create() is called only by a single caller and hostnqn is
just copied to ctrlr_opts even if it is passed separately.
Hence include hostnqn into ctrlr_opts rather than passing it as a
parameter for bdev_nvme_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I75b640bcecefa94950b0c19936fab0571c428125
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9332
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The NVMe bdev module will have two similar features, multipath and
failover when it supports multipath.
Take a case that we add two different trids with the same name by the
bdev_nvme_attach_controller RPC as an example.
The failover adds secondary trid to an existing nvme_ctrlr. The multipath
feature creates another nvme_ctrlr and adds it to the same nvme_bdev_ctrlr
which has an existing nvme_ctrlr.
We want to use bdev_nvme_attach_controller for both failover and multipath.
To do it cleanly, separate callback to spdk_nvme_connect_async() between
creating ctrlr and setting failover.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id9bc175af6201cdd74e12d4903fc81afe4f91189
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9225
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Split the connection process across two states, which allows the
transport to connect the admin queue asynchronously.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ie84477331df0abf5ffdfc2a0ff5d5ada760c9e73
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9076
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The fabric connect command is now sent without. It will make it
possible to make `nvme_tcp_ctrlr_connect_qpair()` non-blocking too by
moving the polling to process_completions (this will be done in
subsequent patches). Additionally, two extra states,
`NVME_TCP_QPAIR_STATE_FABRIC_CONNECT_SEND` and
`NVME_TCP_QPAIR_STATE_FABRIC_CONNECT_POLL`, were added to keep track of
the state of the connect command. These states are only used by the
initiator code, as the target doesn't need them.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I25c16501e28bb3fbfde416b7c9214f42eb126358
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8605
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
These functions will allow for sending the connect fabric command
asynchronously.
Additionally, this patch changes the return code for
`nvme_fabric_qpair_connect()` when a timeout occurs from -EIO to
-ECANCELED. It gives better description of the error as well as make it
more consistent with `nvme_wait_for_completion*` APIs.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I95806626d3573ebe4b1568157fd57013c4b909a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8604
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Since the connect will be completed asynchronously, we
need to keep the pointer around so we can access (and
free it!) later when the command completes.
Also change the code to poll on the status using the
new nvme_wait_for_completion_poll(), as prep for upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I28add8f967fd000afed1e50e491a16ea9da16c22
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8603
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This fixes unit test failure caused by 4ac203b2d, which changed the way
asynchronous events are reported to be on a per-process basis.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I150de552bb4be5e184d6eb518abf89f83de106eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9308
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Modified the async_list to be per-process instead of
on the controller object. This allows an NVMe multi-
process setup to have Asynchronous Events Reported
to each process that may interested in them. In the
previous case, where the async event list was on the
controller object, AER (Async Event Requests) would
not be reported to all the processes.
Fixes: #1874
Signed-off-by: Curt Bruns <curt.e.bruns@gmail.com>
Change-Id: I3e885c0cf5a0fd471d243bc7d96a8b7ffe65d14b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8744
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There may be multiple C2H data pdus recevied.
So we should use the following steps:
1 Use the SPDK_NVME_TCP_C2H_DATA_FLAGS_LAST_PDU
to check whether it is a last pdu or not.
Then we will not cleanup tcp_req, i.e., tcp_req->datao
will not be cleaned.
Then use the SPDK_NVME_TCP_C2H_DATA_FLAGS_SUCCESS
to check whether the controller will use resp pdu
or not.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9dccf2579aadd18f31361444e25bd4b3b76f06c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9192
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch makes use of async_fini_start flag to
make fini_start asynchronous.
During this time all lvol stores which have no open
lvols are unloaded. This is required, since lvs
holds claim on the underlying bdev.
Fixes#1630
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If443cb087324d08a4a70df71c7afd930ab654f90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9095
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Callback for bdev modules is called 'module_fini',
meanwhile after its execution bdev modules were to call
'spdk_bdev_module_finish_done()'.
This function carries incorrect name, so it was deprecated
and replaced with 'spdk_bdev_module_fini_done()'.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9a12dff746ea8b4b1570a3794470f7b24e29003e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9148
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will be done in stages. This patch adds the
nvme_tcp_ctrlr_connect_qpair_poll function and and makes the icreq step
asynchronous. Later patches will expand it and make the
nvme_fabric_qpair_connect part asynchronous as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ief06f783049723131cc2469b15ad8300d51b6f32
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8599
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Just add a single .gitignore file in test/unit
that covers *_ut. That allows us to eliminate
100 .gitignore files in the test/unit directory
hierarchy.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia190587b4d5c6f1847471be27550cbfb843dc01e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9235
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We could not restore the setting of ana_reporting because it was not
included in the JSON config dump.
Add the parameter ana_reporting into JSON config dump by adding and
using a new helper function nvmf_subsystem_get_ana_reporting().
Besides, previously the JSON RPC nvmf_subsystem_get_listeners had
ana_state regardless of the value of ana_reporting. We make it
conditional in this patch. The JSON RPC nvmf_subsystem_get_listeners
had not been used in the test code in the repository. Hence this
change will be acceptable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia4e04600c969c254e0a816d3eb34983ee951091e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9111
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Once bdev finish starts, bdev unregister is called on all
unclaimed bdevs. This means that for lvs with at least one
lvol present, there will be a corresponding bdev unregister.
Yet the vbdev_lvol module does not attempt to unload the lvs,
once last lvol from that lvs is unregistered. Leaving
the base bdev for lvs claimed.
This patch fixes that by using fini_start callback from
bdev_module to mark when shutdown begins. After that
last lvol unregistered on lvs will unload it.
Expanded struct lvol_bdev to contain lvol_store_bdev.
Closing the lvol will free spdk_lvol, so lvol->lvol_store cannot
be accessed.
Changed ut_lvol_destroy UT to ut_bdev_finish. Previous UT didn't
really test vbdev_lvol_destroy, but 'hotremove' of the lvol bdev.
In effect there is no hotremove of the lvol bdevs (only lvs bdev).
spdk_bdev_unregister() can only be called from within vbdev_lvol,
or during bdev module finish.
This UT will now check the bdev module finish.
Note that at this point lvs with no lvols will not trigger
lvs unload. Next patches in series will introduce async fini_start,
to allow for the unload.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8f51e8c1fcfdc55a5d090a3bc84ccefda813aef8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9093
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Instead of calling vbdev_lvol_unregister() hooked up
to the destruct callback, use spdk_bdev_unregister()
directly.
The spdk_bdev_unregister() is always asynchronous
and callbacks are delayed until spdk_bdev_destruct_done().
This is now corrected in the stubs.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I50683c71be80b1baa8bf3b39a05ca631ac527c2e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9155
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
The new API is used if bdev ext_opts is not NULL.
Change-Id: I414b5d19bff54114d6708efed89ba19b5955f56a
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
These functions accept extendable structure with IO request options.
The options structure contains a memory domain that can be used to
translate or fetch data, metadata pointer and end-to-end data
protection parameters
Change-Id: I65bfba279904e77539348520c3dfac7aadbe80d9
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6270
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Add a global list of memory domains with reference counter.
Memory domains are used by NVME RDMA qpairs.
Also refactor ibv_resize_cq in nvme_rdma_ut.c to stub
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Ie58b7e99fcb2c57c967f5dee0417e74845d9e2d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8127
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Memory domain is used to describe memory which belongs to
another address space (e.g. GPU memory or host memory)
Memory domain can be configured with callbacks to translate
data to another memory domain and to fetch data to
local buffers.
Memory domains will be used in extended
bdev/nvme API added in the following patches.
Change-Id: I0dcc7108a4fbf416a11575aa5cf5d7ec501b3d8b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8126
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
If a qpair is part of a poll group and it's not configured in the async
mode, it should be using poll group's process_completions variant.
Additionally, connecting qpairs to the poll group was moved up, so that
qpairs are already on the connected qpairs queue when waiting for the
connection to complete.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I08f75bd61a566d1ab60029b6202d9337df75733f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9074
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Replaced poll cycle count with a timeout when destroying a qpair that is
part of a poll group. Tracking the time instead of a poll count is more
stable, as the number of poll cycles can vary based on the application's
behavior when destroying a qpair.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I7445bc1b411f2905aab7bf3dc7b2d3344712e1eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9200
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Number of active namespaces may change. So, on ANA log page update we
should check if buffer has to be resized.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I1720317ea7f59e5afef73d5c4bd1cd69a7dd6520
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Log page reading function 'spdk_nvme_ctrlr_cmd_get_log_page' does read
into intermediate buffer and then copy to user provided buffer. So,
there is no need for user buffer to allow DMA.
Signed-off-by: Evgeniy Kochetov <evgeniik@nvidia.com>
Change-Id: I7337afa99c3ae666cc43ea2a48317de875334cfc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9177
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
async_mode option is currently supported in PCIe transport layer
to create io qpair asynchronously. User polls the io_qpair for
completions, after create cq and sq completes in order, pqpair
is set to READY state. I/O submitted before the qpair is ready
is queued internally. Currently other transports only support
synchronous io qpair creation.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib2f9043872bd5602274e2508cf1fe9ff4211cabb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8911
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_reactor_set_interrupt_mode() writes/reads from fds created during
reactor_interrupt_init(). Since spdk_fd_group_create() depends
on eventfd, this will not work for systems that do not have it.
reactor_interrupt_init() handled lack of support for eventfd correctly,
while spdk_reactor_set_interrupt_mode() did not check for it.
Reported-by: Nick Connolly <nick.connolly@mayadata.io>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5181d436636c55cca3a06b1947e944502a9204ce
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9131
Reviewed-by: Nick Connolly <nick.connolly@mayadata.io>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The current num_md_clusters doesn't include the the part before
md_start. So the bs_recover will get more num_free_clusters than it
should be. This patch can fix it.
Signed-off-by: Peng Yu <yupeng0921@gmail.com>
Change-Id: I911926beb69aca677da508ba71f292496c917e7f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/9034
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The generic transport layer still does a busy wait, but at least
the logic in the PCIe transport now creates the queue pair
asynchronously.
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Change-Id: I9669ccb81a90ee0a36d3f5512bc49c503923b293
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8910
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
