This will be used to get extended LBA based range or length in NVMe/TCP
target later.
Change-Id: Id0f08bdaeea634dbc05b34a0f7914be21aef9aae
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458706
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add spdk_dif_update_crc32c_stream to update CRC32C by stream fashion.
spdk_dif_update_crc32c_stream utilizes the updated _dif_update_crc32c_split.
A minor bug was found in UT for spdk_dif_update_crc32c and is fixed
together in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I92358e845e8e2e17c6f288aa718b947e71e6e1fb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458919
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment, and _dif_update_crc32c_split will have to
process partial data block, particularly the following types:
- start and end are both within a data block.
- start is within a data block, and end is at the end of a block
On the other hand, _dif_update_crc32c_split had assumed that passed
block is always a complete block.
This patch exposes offset_in_block, data_len, and guard as parameters
of _dif_update_crc32c_split() and make _dif_verify_split() process
the above two types of data block properly.
The next patch will utilize the updated _dif_update_crc32c_split to
add spdk_dif_update_crc32c_stream().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iee29377ad49d4f209673fffb4de4a23a54f31766
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458918
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_dif_generate_stream() and spdk_dif_verify_stream() are very
similar. Factoring out the common part into a function will improve
the maintainability and do in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16ecd0860c75037d9182298d7513749dfe8e9b56
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458376
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add spdk_dif_verify_stream to verify DIF by stream fashion.
spdk_dif_verify_stream utilizes the updated _dif_verify_split.
spdk_dif_verify_stream is very similar with spdk_dif_generate_stream().
UT code demonstrates how it is realized.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1c5d197cf4c0bbc82c8e7f4fa45ddc0b94051058
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458330
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment, and _dif_verify_split will have to process
partial data block, particularly the following types:
- start and end are both within a data block.
- start is within a data block, and end is at the end of a block
On the other hand, _dif_verify_split had assumed that passed block
is always a complete block.
According to the refactoring done in the last patch, this patch
exposes offset_in_block, data_len, and guard as parameters of
_dif_verify_split() and make _dif_verify_split() process the
above two types of data block properly.
The next patch will utilize the updated _dif_verify_split to
add spdk_dif_verify_stream().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic371d3ccefbd5fe8147a948a624013be2702128e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458329
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment, and _dif_verify_split will have to process
partial data block, particularly the following types:
- start and end are both within a data block.
- start is within a data block, and end is at the end of a block
On the other hand, _dif_verify_split had assumed that passed block
is always a complete block.
To process the above types, separating guard computation, DIF copy
and skipping metadata field, and DIF verification into three parts
will be helpful and is done in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic4f1765e01507efa812dfaf7a8018666c6346f8e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458328
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch makes spdk_dif_set_md_interleave_iovs() and
spdk_dif_generate_stream() process unaligned start of data segment
properly by using ctx->data_offset.
Separating this patch into two may be required but this patch is
small and aggregating into a patch is good to test.
UT code demonstrates how it is realized.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idb5250aba4e12a34102e5ce067d725c685681177
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458142
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
To process unaligned data segment properly when a whole data buffer
is splitted into multiple data segments and each data segment has
any alignment, we have to update only data offset of DIF context
according to the progress.
Hence this patch adds an new API spdk_dif_ctx_set_data_offset().
The API will be used in the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I346ab583518b80792ea40d34cf0c8536ecc3d904
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458141
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
NVMe/TCP target may split a whole data payload into multiple H2C
or C2H PDUs with any alignment. Hence to insert or strip DIF correctly
to the split H2C or C2H PDUs, we have to bring the interim guard
value of the last partial data block of the current H2C or C2H
PDU to the first partial data block of the next H2C or C2H PDU.
So we add last_guard to struct spdk_dif_ctx and use it in
spdk_dif_generate_stream().
API spdk_dif_generate_stream() is not changed and UT code should
pass without any change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I12636c5ac7f619483402538faff4339a16c0e6b0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457545
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment, and _dif_generate_split will have to process
partial data block, particularly the following types:
- start and end are both within a data block.
- start is within a data block, and end is at the end of a block
According to the refactoring done in the last patch, this patch
exposes offset_in_block, data_len, and guard as parameters of
_dif_generate_split() and make _dif_generate_split() process
the above two types of data block properly.
The next patch will utilize the updated _dif_generate_split in
spdk_dif_generate_stream().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4211e65ead7fc256a40748412c670e46f83b1731
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457544
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment, and _dif_generate_split will have to process
partial data data block, particularly the following types:
- start and end are both within a data block.
- start is within a data block, and end is at the end of a block
On the other hand, _dif_generate_split had assumed that passed
block is always a complete block.
To process the above types, separating guard computation, DIF generation,
and DIF copy into three parts will be helpful and is done in this
patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0171d9021837b9a4b425370293cef45dbe7500e8
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Four variables head_unalign, tail_unalign, num_blocks, and offset_blocks
became unuseful by the last patch. Hence reduce them to buf_len and
buf_offset in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I04fc1e442be6569a96533cdfe36b27fcc78e98d4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457876
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
For NVMe/TCP target, data segments which correspond to H2C or C2H PDU
will have any alignment. spdk_dif_set_md_interleave_iovs() have allowed
reading data to have any alignment but had required data segment to
be a multiple of block size.
In other words, spdk_dif_set_md_interleave_iovs() had required that both
ctx->data_offset and (data_offset + data_len) must be a multiple of the
data block size.
This patch refines the algorithm to remove the latter requirement.
The update implies that spdk_dif_set_md_interleave_iovs support any
data buffer whose size is less than a single data block.
The update doesn't change parameters of spdk_dif_set_md_interleave_iovs
and existing UT should be passed.
This patch adds additional UT code to test these updates.
Change-Id: I88c7d2a80a8d92b54863b6ad1c3a9d2761a6195d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The subsequent patches will refine spdk_dif_set_md_interleave_iovs
to change the data_len parameter to be the remaining length, and
to remove alignment constraint completely. This patch is a
preparation to subsequent patches.
This patch doesn't change any behavior.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0e9be7e66d313f3ec2bd8c55cce8bb18e4fff892
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457721
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch changes the meaning of the data_len parameter of
spdk_dif_set_md_interleave_iovs from `Expected data length of the payload`
to `Expected length of the newly read data in the extended LBA payload`.
This change will align the parameters of spdk_dif_set_md_intereleave_iovs
to of spdk_dif_generate_stream.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7f9c45e78be977625713acb79d2ae82d4375f419
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457543
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
As same as spdk_dif_set_md_interleave_iovs, no noticeable performance
difference was observed even if dif_generate_stream and
dif_generate_stream_split are merged into the latter.
spdk_dif_generate_stream will be updated in subsequent patches anyway.
Hence merge them into dif_generate_stream_split.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I77b588527bc7533dc38a36e450972758ce57d6bb
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457760
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Even if the code for single iovec case is removed, no performance
difference was observed when inserting/striping DIF for iSCSI target.
And the subsequent patches will add more complex operation and hence
simplifying the code before them will be valuable.
So this patch merges dif_set_md_interleave_iovs and
dif_set_md_interleave_iovs_split into the latter.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I784b9e04f0983ed91c7aa66bbc7ceaed4406e3ac
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457758
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Data offset are intended to correspond to DATAO in NVMe/TCP and
Buffer Offset in iSCSI.
Previously for iSCSI, buffer offset had been merged to start block
address, but passing buffer offset separately from start block address
clarifies the logic more.
On the other hand, for NVMe/TCP, passing DATAO separately from start
block address will be critically important because DATAO will bave any
alignment and will be necessary to use for not only reference tag
but also guard computation.
This patch adds data_offset to struct spdk_dif_ctx and adds it to the
parameters of spdk_dif_ctx_init(). ref_tag_offset is also added to struct
spdk_dif_ctx and it is computed by dividing data_offset by data_block_size
and is used to compute reference tag.
The next patch will use this change when getting DIF context in SCSI.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0e12ca9b1dc75d0589787520feb0c2ee0f844a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457540
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
using data_offset and data_len is consistent with related APIs,
and is done in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic9d216e25880f7b5ab33b764f45d332c090fa88c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456291
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Data digest computation should take extended LBA payload but
could not do yet.
This patch adds an new API spdk_dif_update_crc32c() to compute
CRC-32C value for extended LBA payload.
In the next patch, spdk_dif_update_crc32c will be used in iSCSI
target first.
Change-Id: I327f384bb7dfd8b68279b0acec0ee78a40264a26
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
_dif_sgl_fast_forward covers _dif_sgl_advance. Hence this patch
merges two into _dif_sgl_fast_forward and renames it to
_dif_sgl_advance.
Change-Id: I4949f3028b08cec8df8c9037c983d840d0a1eaaa
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456184
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch allows multiple iovecs as argument in spdk_dif_generate_stream.
Subsequent patches will support DIF strip and insert in SPDK NVMe-TCP
target based on the patch series.
Change-Id: I1f3d6c5b9f924bb52525e1611db403846d087563
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453756
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As a subsequent effort, this patch changes the interface of
spdk_dif_generate_stream to accept SGL data buffer.
This patch allows only a single iove. The next patch will allow
multiple iovecs.
Change-Id: I56f901d73ca3b9da4b56c213ebafcd7706b1fef8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453755
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch allows multiple iovecs as argument of
spdk_dif_set_md_interleave_iovs.
Subsequent patches will support SGL data buffer in
spdk_dif_generate_stream too. UT code tests only
spdk_dif_set_md_interleave until then.
Change-Id: I7ac03a3c8f7bcd922af4f29b404ebf3acc4b89e5
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently iSCSI target have used a single contiguous data buffer
both for read and write I/O. Hence spdk_dif_set_md_interleave_iovs
accepts a single contiguous data buffer and its size as arguments.
On the other hand, NVMe-TCP target recently has changed to use
SGL data buffer instead.
DIF strip and insert will be supported in NVMe-TCP target next,
and updating spdk_dif_set_md_interleave_iovs to accept SGL data
buffer will be helpful.
This patch changes the interface of spdk_dif_set_md_interleave_iovs,
but allows only a single iovec. The next patch will allow multiple
iovecs.
Change-Id: I31b09814f8ec920e463a5b1be8fb88cad7d277fb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously _iov_iter_fast_forward can fast forward only from the
start of the iovec array. This patch enables fast forward in the
middle of the iovec array.
Change-Id: I801fc46dec3c759e1d754042abe15e7100cbdc17
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By clearing head_align to zero after using it, we can merge two code
blocks into a single while loop, and replace goto by simple break.
Change-Id: Ia63cd0d7dbf4b9dddf7da93e11351bb46bd04791
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454394
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
struct dif_sgl had been used only to iterate the passed iovec
array. This patch utilizes struct dif_sgl and adds a helper
function _dif_sgl_append() to simplify to create iovec array.
_dif_sgl_append() is a static function and we have to add
the callee together when we add any static function.
So this patch adds both even if the patch size is a little
larger.
Besides, iovcnt has been used to mean the number of elements
in the iovec array widely in the DIF library. So this patch
changes the name of it from num_iovs to iovcnt.
Change-Id: I1db4abc8ed4d2c107fe01ec6592f5f6731dc5520
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change unifies the DIF library to use dif_sgl throughout.
Change-Id: I60addcf05e75b823e4dfb216122bf46edbc42e78
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454528
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Using for loop is better for a few cases now.
Change-Id: I48e3a276fb860f2b969e7c331bdfdac8102172d7
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454527
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The struct _iov_iter has been used to iterate the passed iovec array.
Subsequent patches will share the struct among iteration and
creation. To clarify this update, rename the struct _iov_iter to
_dif_sgl. The name sgl has been already adopted widely in SPDK.
Change-Id: Iab81bcb0658fbd0e39305e045c3d0aadba8fc55f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an new API spdk_dif_generate_stream() to insert DIF into
the metadata space of newly read data block by stream fashion.
This API is tested by replacing the previous DIF generation such
that DIF is generated once all data was read.
Change-Id: I757b4e6f10fe2d9d643f56ebb678c731cdad63bb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446594
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
This patch adds an API spdk_dif_set_md_interleave_iovs().
This function is used to leave a space for metadata for each block
when the network socket reads data, or to make the network socket
ignore a space for metadata for each block when the network socket
writes data. This function removes the necessity of data copy in
the SPDK application during DIF insertion and strip.
Change-Id: I018efd77bdadcaec4679eea4dc1e404f155b0879
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446216
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Allow user to add seed value for guard compuation to DIF context.
This will avoid the guard being zero in case of all zero data.
NVMe controller doesn't support seed value for guard computation
explicitly, and hence if we want to use such a seed value in
NVMe controller, we have to format metadata more than 8 byte,
and add seed value into the reserved metadata field.
But some popular iSCSI/FC HBAs and SAS controllers have supported
seed value for guard computation, and so supporting seed value
in the SPDK DIF library is very helpful for some use cases.
Hence this patch makes the DIF library possible to specify seed
value for those use cases.
Change-Id: I7e9e87cb441bf263e64605c7820409fdc22dd977
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/444334
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Next patch will introduce enum spdk_dif_check_type for user to
know easily if checking DIF field is enabled or not.
This patch renames bitmask macros from SPDK_DIF_*_CHECK to
SPDK_DIF_FLAGS_*_CHECK to avoid mis-interpretation .
Using FLAGS was derived from SPDK_NVME_IO_FLAGS_PRCHK_* in
include/spdk/nvme_spec.h.
Change-Id: I89e155d047352f54091c14b9251464cd3a72a162
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/443338
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SPDK NVMe driver and NVMe CLI define the parameter about DIF location as
follows:
If set to 1 and DIF is enabled, then DIF is transferred as the first 8
bytes of metadata. If set to 0 and DIF is enabled, then DIF is transferred
as the last 8 bytes of metadata. Defaults to 0.
This patch fixes the apparent inconsistency.
Change-Id: I481332bb9a6caa488664dbd1fe6039270b9f9663
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/440672
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In the similar codes that for dif (precisely speaking,
_dif_generate_copy_split() and _dif_verify_copy_split()), they calculate
CRC of metadata after data, so let's make them consistent.
Change-Id: I2d725277ab42657ba2e0253ae8cece829fd868b4
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/439824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Because we have called _are_iovs_valid() to ensure that all blocks are
covered by iovec, and we process iovec compactly and orderly, so we
don't need to do _iov_iter_cont() check.
Since all callee are removed, so reomve definition of _iov_iter_cont()
as well.
While here, add an assertion in _iov_iter_advance() to detect
unexpected error.
Change-Id: I6b6077bafbf7ec18f14ee2835d3b99199b5e559b
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/c/439869
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
For separate metadata payload, Introduce a struct to collect DIF error
information and pass the reference to the struct to bit-flip error injection
and verification.
This change will make logging of DIF error and comparison between
injection and verification possible for separate metadata payload.
Merging this patch to the previous is possible but add this as a separate patch
to reduce the patch size.
Change-Id: Ifce2130e902bc090cbe205fa8df12559739ced57
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/435097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch adds APIs to generate and verify DIF for SGL
payload with separate metadata as byte alignment and granularity.
Change-Id: I4e553c9b6f8c96e576a69115002963d32379d439
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/434150
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For copied extended LBA payload, Introduce a struct to collect DIF error
information and pass the reference to the struct to bit-flip error injection
and verification.
This change will make logging of DIF error and comparison between
injection and verification possible for copied extended LBA payload.
Merging this patch to the previous is possible but add this as a separate patch
to reduce the patch size.
Change-Id: I9f7ac1332fe63cb206c692d0876c8de41ef9286f
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/435227
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds APIs to copy data and generate and verify DIF
for internally created extended LBA payload.
This patch is for read strip and write insert operation to make
DIF transparent to the upper layer.
Change-Id: I025f35571490aa197aac5e7572549e31c2479b41
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/432987
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Introduce a struct to collect DIF error information and pass
the reference to the struct to bit-flip error injection and
verification.
This change will make logging of DIF error and comparison between
injection and verification possible.
Change-Id: I43941f1a7f4b0ad1e8ff324f2ac8fad9e195a100
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/438023
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This patch reduces the number of parameters of APIs by setting
necessary information to context struct and pass it to APIs.
This will simplify the code and will clarify the core logic.
Besides, by introducing context data, update of reference tag
is further consolidated.
Change-Id: I1b3eec596847eb4ef1cf43441035df21f746192a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/438021
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Metadata size was checked if it is not zero.
This patch changes the check to if it is not smaller than DIF field.
Change-Id: Ibdc38367091af2d07a8443bf6cda6b4b5a23306d
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/438363
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The case that metadata is supported but DIF is not enabled was
handled as error. But the case is described as an normal case
in NVMe specification.
This patch changes the case to normal.
Besides a break was missing and added in this patch.
Change-Id: I784c36fed3b92da9ae5500d945f1dc20a2ca406b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/438362
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
