Implementation is pretty solid now, add first test with many
more to follow.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4b80f3108fcd07919949bcd14dadfdfeb10c45fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6332
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This test was designed with 3 cores in mind,
where ut_thread and io_thread were always on separate
cores.
This patch just simplifies the logic for doing exactly that.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica0b594d2be20df0fa430e290e97f0b34be17c62
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6233
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Remove ocssd_bdev_parameter from bdev_ocssd_from_disk_lba(),
bdev_ocssd_to_disk_lba(), and bdev_ocssd_to_chunk_info_offset()
including unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iaf52e3e33609e9f1fe13050e95020bad688dc6ae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6223
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It has been confirmed that there is no affected use case in
the SPDK community when we remove the range parameter from
the bdev_ocssd_create RPC.
Hence, remove the range parameter from the bdev_ocssd_create RPC,
remove range parameter from bdev_ocssd_create_bdev(), remove range
info from ocssd_bdev_config_json(), and then update unit tests
accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1b0a541b61bf26732fd028dc43becb7ca2384f8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6220
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
12.2 FreeBSD release has problems with building spdk with 3.19 fio
vm_setup.sh provides. Instead of patching anything, simply ignore the
warnings.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I1d85320126d664c7ed45ee369612391cfba8fd06
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6405
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Test bdev_nvme_submit_request() for all supported I/O types
including comare and write.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8c3e7e1b93307329e9cc55692fa3e0e8c291a5b5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6190
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add a test case for AER. It includes populating, depopulating, and
resizing namespaces dynamically.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib00c3279142cbdd70a0d571baee5797e661bb963
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6138
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add stub of struct spdk_nvme_qpair and related APIs, and test cases
to reset or failover nvme_bdev_ctrlr. They include a case that destruct
and reset are executed concurrently, and a case that two reset requests
are submitted concurrently. For failover, the test cases are for a single
trid or two trids.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6538a4dc32a73d0d72d6cac2a48c79ea7f00d332
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6132
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add framework for unit tests of bdev_nvme, and add a very simple
test case to create and destruct a nvme_bdev_ctrlr first.
Following patches will add more test cases and dynamic stubs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I98f07d58d469949f3dac5a0bd36a3963de8dc3d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6131
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
- it shows nice feature and usage of pkg-config
- it also prevents from duplicate symbols issue for static build in
case listed libs have a common dependencies
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I1f470d202ea7efe03e354dca472fd50e97bca747
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6406
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We already have support for spdk_nvme_zns_zone_append(),
add support for spdk_nvme_zns_zone_appendv() (zone append with
NVME_PAYLOAD_TYPE_SGL).
_nvme_ns_cmd_rw() currently performs verification of the SGL,
if the parameter check_sgl is set. This parameter is set for all
calls with payload of type NVME_PAYLOAD_TYPE_SGL.
In order to be able to perform the same check_sgl verfication on
zone append vectors, we need to refactor _nvme_ns_cmd_rw() a bit.
Setting check_sgl ensures that _nvme_ns_cmd_split_request_sgl() or
_nvme_ns_cmd_split_request_prp() gets called.
These functions will split an oversized I/O into several different
requests. However, they also iterate the SGE entries, verifies that
the total payload size, total SGE entries is not too many, and that
buffers are properly aligned. A proper request will not get split.
For zone append, splitting a request into several is not allowed,
however, we still want the verification part to be done, such that
(e.g.) a non first/last SGE which is not page aligned, will cause
the whole request to be rejected.
(In the case of spdk_nvme_ns_cmd_write(), a non first/last SGE which
is not page aligned will instead cause the request to be split.)
An alternative would be to try to rip out the verification part from
_nvme_ns_cmd_split_request_sgl() and _nvme_ns_cmd_split_request_prp().
However, that is non-trivial, and would most likely end up with a lot
of duplicated code, which would easily get out of sync.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I2728acdcadeb70b1f0ed628704df19e75d14dcca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6248
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Simplify the test to follow the scheduler period in order to check if
target thread is properly balanced among selected cpus.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I326ad1171ca00c3d171aebe95266c5e4998abad3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6337
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unit tests for spdk_strtol/spdk_strtoll use hard coded strings for
arithmetic constants (LONG_MIN/MAX etc). These are only valid
on platforms where both long and long long are 64-bit values.
Replace the hardcoded values with strings generated from limits.h.
The tests use values that are outside of the MIN/MAX range, which
cannot be represented as int64_t. These are calculated in two parts
to avoid overflow and recombined as a string.
Verified using the unit tests on two different architectures and with
test code to check that the generated string is the same as the
hardcoded value on x86 Linux. Used a small test program to calculate
+/-30 around each limit value to check carry handling and boundary
conditions.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I990ff354f568a0b35853ecc849dd2a452bb1048b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6048
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There is a special case when using 8-byte metadata + PI + PRACT
where no metadata is transferred to/from controller.
Since _nvme_ns_cmd_rw() already calculates the proper sector size
using _nvme_get_host_buffer_sector_size(), which takes PRACT into
account, change the sectors_per_max_io calculation to also take
PRACT into account.
This will avoid certain requests that don't need splitting getting
split.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: I8d450d37c2458453701189f0e0eca4b8fe71173b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6247
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_thread_create() does not require unique thread
names, and we already print out the CPU mask for each
job. So there is no need to append the cpumask to the
thread name.
Removing it has the added advantage of not modifying
the job name specified by the user if they are using
a job config file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d75ea2bdc50061d7338ad41749e458efa62b48e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6331
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
We can make the output a bit more precise by putting
the Core Mask on the same line as the Thread Name.
Let's also use "Job Name" instead of "Thread Name"
since that more closely matches the user's intent.
We use a thread internally for each job, but user
specifies workloads in terms of jobs, not threads.
Finally let's get the Total values aligned
with the per-job values again - this seems to have
broken as part of commit d80b4f4.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I04fcd294b8f88374b11e09350aabf84beb2ae60e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Previously we only tested one device with vfio-user target,
now add one more device to the test script.
Change-Id: I6923a313b23f93e6fdc3f25baa060b9af43ba7f7
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function allows applications to specify whether
they wish to allow probing a newly attached NVMe
PCIe SSD.
The env layer will only even probe devices that have
been allowed. By default, this is all devices, but
if the user has specified some list of
allowed PCI addresses (via spdk_env_opts pci_allowed)
then newly attached PCIe devices are implicitly not
allowed. This API allows applications to add
device addresses to the allowed list after the
application has started.
This API will be useful for use cases where multiple
SPDK processes are running on one server, and assignment
of PCIe SSDs to those processes are based on some function
of the SSD's PCIe address.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I919bc267f2ad9130ab5c875ff760a301028b047e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6184
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Issues like https://github.com/spdk/spdk/issues/1784 showed that
governor may need some more time to properly adjust cpufreq's sysfs
knobs. In case we see that frequency setting hasn't changed after
given iteration, wait for 0.5s to make sure it finally settles.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ibf25d0d1962bf2b07b13d60d6096c5cc185c1279
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6283
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Fixes#1777.
When a qpair cannot be allocated because the transport connection fails,
the qpair was freed without unlinking it from the other structures.
This was leading to a segfault when attempting to create and free other
qpairs.
Also added a unit test to cover this case.
Change-Id: I74b78d1847f90117248b07203b43a11ff5cfa5d6
Signed-off-by: Vasuki Manikarnike <vasuki.manikarnike@hpe.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6272
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Case 'H' should return 0, this is a normal return.
Change-Id: I09f81e08d782007c62592475750e70461c83f318
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6194
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When val gets optarg and argument is 'H', a null pointer passed as argument 1,
which is declared to never be null. So we adjust the order, judge 'H' first.
Then './test/app/stub/stub -H' will display help info instead of 'Segmentation fault'.
This patch fixed it.
And case 'default' should return 1.
Change-Id: I6ba9311eb5ac90266fdf33ab3424ab28fa64a78f
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6083
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the quarterly releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 21.04
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I44d01154430a074103bd21c7084f44932e81fe72
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6167
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
libspdk_idxd library was introduced in SPDK 20.04 without
specifying SO suffix. This required to skip a test for this library
after the release.
This is no longer required.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3981888c9187c47012e252c24fc4d6f7992d5d76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6219
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For correct behaviour, pthread_mutex must be initialized before use
and destroyed when finished. Add mutex initialization and destroy
calls to io_valid_test.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Idbbf857f3103ba15ab851ed16ce9f4e2bc99f7dd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6218
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We don't typically "describe" our releases and it seems
that last LTS (20.01.2) was described by accident,
so this script worked. Fix it for 21.01 LTS.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I2e64380299cd1a4aeaf21f324890d9257efdaea3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6244
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
For correct behaviour, pthread_mutex must be initialized before use
and destroyed before the memory is zeroed. Add mutex initialization
and destroy calls to test_nvme_pcie_hotplug_monitor.
Tested with a pthreads library that contains debugging code to
check the mutex state.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Ifd770a85627a11e2b2c6643f798f796bab10b6cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6153
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Mellanox Build Bot
For flow control reasons we have to resize the bit arrays we
use to manage flow as channels come and go. However since
channels are assigned to devices, until the channel count
reaches the device count there's no sharing so no resize of
the array is needed. So, when we use a device for the first
time there's no need to run through the rest of the channels
and re-balance.
Same thing is done on destruction. The code to free idxd
specific resources was moved from the rebalance function to
the idxd put channel function which is a much more logical
place for it as well.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib4df163286906f413dd6429dc6833af7b68e208c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5846
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Config #1 remains what is shown as an example in the spec. Change
config #0 to just have 1 work group and 1 work queue all backed
by 4 engines. As the majority of initial use cases will not be
implementing separate priorities and/or different back end
targets (mem, pmem, etc) having just 1 group and work queue makes
the most sense as it allows the silicon to decide which engine to
use.
Also, having multiple work queues spreads out the available
entires such that if we're not using all of the work queues then
we're not using all of the resources. As channels are created
they are assigned the next available device. As a channel is
assigned a device that is already in use it will round robin
work queues. If then, for example, we have 16 devices then only
the first work queue will ever be used for the first 16 threads
which seems and if there are even just 2 work queues per device
it would take 32 threads to use all of the resources at the
device.
By haing just one work queue per device we always have the max
number of work queue entries available regardless of how many threads
are being used.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie15ff6bdea12525fe3bfc769613084ddd2de50bf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5845
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The original value of bs is 4096, we can rewrite it in another script.
When spdk_nvme_ns_supports_extended_lba(ns) is 1, we need to
test with an integer multiple value of extended_sector_size, such as 4160.
Change-Id: I8257bee4f741f62597bb2bb645ee9c59cf57bf33
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If the CUnit include files are located through CFLAGS rather being
in one of the system include directories, then the version test will
fail and blob.c unit tests will be skipped. Specify CFLAGS as part of
the CC command.
If the version check fails, clean won't be run to remove any left over
artifacts. This can occur if CUnit is being built externally and gets
cleaned before SPDK. Add an extra definition (ALL_DIRS) to control
compilation, so that clean will always be run.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I6099fceb14cfc6473a6b8feed746d2b44b8d291a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6054
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since this script is only running tcp transport,
so we can enable the header and data digest configuration
when running nvme connect option.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9954af0fc9798cc565c2a439ecba1707d3629e83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6119
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For correct behaviour, pthread_mutex must be initialized before use.
Add static initialization to a couple of structures containing a mutex.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I7049824bb292135dbebab201083a1858597f94d1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6124
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Moved the test to a separate function so it runs under run_test.
This will make sure the logs print out "START TEST" and additionally
that time taken will be tracked separately.
It might have been misleading to include results of this test
right after confirm_abi_deps. This could lead to belive that it
was output of confirm_abi_deps. See snippet:
************************************
START TEST confirm_abi_deps
************************************
* Running confirm_abi_deps against spdk_abi_latest
Processed 60 objects.
real 0m3.970s
user 0m3.220s
sys 0m0.600s
************************************
END TEST confirm_abi_deps
************************************
---------------------------------------------------------------------
there was a dependency mismatch in the library nvme
The makefile lists: 'log sock util rdma vfio_user'
readelf outputs : 'log rdma sock util'
---------------------------------------------------------------------
shared object test failed
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie0768b8a9c7390f51d35b2e879f66854a4da2226
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6143
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
For correct behaviour, pthread_mutex must be initialized before use
and destroyed before the memory is zeroed. Add mutex initialization
and destroy calls to test_nvme_init_controllers.
Tested with a pthreads library that contains debugging code to
check the mutex state.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I9a0509bee176940e1aa46bd5de4c6ad396b787e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6152
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For correct behaviour, pthread_mutex must be initialized before use
and destroyed afterwards. Add mutex initialization to
DECLARE_AND_CONSTRUCT_CTRLR and add DECONSTRUCT_CTRLR
to cleanup afterwards.
Tested with a pthreads library that contains debugging code to
check the mutex state.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Ifefec17b44ac01769fd9d041119fa093b4e9d8b2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6155
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For correct behaviour, pthread_mutex must be initialized before use
and destroyed afterwards. Add mutex initialization to
DECLARE_AND_CONSTRUCT_CTRLR and add DECONSTRUCT_CTRLR
to cleanup afterwards.
Tested with a pthreads library that contains debugging code to
check the mutex state.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: Id1d62e6f76548bd8e259d4d9c4d453a3218b0b1c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6159
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For correct behaviour, pthread_mutex must be initialized before use
and destroyed afterwards. An already initialized mutex should not
be re-initialized.
Remove the call to mutex_init from setup_qpairs since it will be done
in nvme_ctrlr_construct.
Add calls to nvme_ctrlr_construct where nvme_ctrlr_destruct is
called without a matching construct.
Add missing calls to mutex_init and mutex_destroy as required.
Tested with a pthreads library that contains debugging code to
check the mutex state.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I0ee97a70d67157668cd8921fbee03d976d4d607d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6161
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Documentation for vhost target states that CPU mask must be a subset
of application CPU mask. This wasn't enforced right now and allowed
the cpumask on controller creation so long as at least single
CPU core overlapped with application's CPU mask.
This might have been misleading and covered up user configuration errors.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I03f959ec37efd0be9b98cff9c93c5f996b04af35
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6212
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
`--cpumask` argument for vhost controller creation was
untested. This patch specifies this argument and verifies output
under following conditions:
- no cpumask, resulting in it being equal to the app cpumask
- cpumask equal to app cpumask
- single core
- single non-main core
- two cores
It was motivated by recent changes to reactor code affecting
vhost without it being caught by CI. See commit 7cc83b62.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I92c603061619092007bc27a189d3d8787461a16f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add the real support in nvme tcp transport.
Change-Id: I2aa9b0284d6fe009925e67f602a055e787f77987
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5734
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch is used to add spdk_nvme_poll_group_get_optimal
public API.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Iee34c89e0e1ff1f81167b18e198c144ca28f71de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3311
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This reverts commit 72eed604b4.
spdk_vhost_init() relies on having a thread on each reactor.
Without the revert, every vhost controller is created on the same
core and even passing --cpumask when creating does not affect it.
Proper fix would be to change spdk_vhost_init(),
but would require additional testing. For now revert the patch
that spawned always idle threads.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0dbd6c9fe1d9d23ada260da8fc7b48086223c632
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Users can use "--with-vfio-user" to enable it when testing it.
For CI configuration, we add a new test flag SPDK_TEST_VFIOUSER
to enable CI tests.
Change-Id: Id284df721171d01cc52491ebf4088bcc17eee147
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6139
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Additionally, the user can specify a namespace to also pause during the
operation.
This allows for the management of hosts, listeners, and the addition of
namespaces all while I/O to other namespaces is occurring. Pausing a
specific namespace also allows for the removal of that namespace without
impacting I/O to other namespaces in the subsystem.
Change-Id: I364336df16df92fe2069114674cb7a68076de6fb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4997
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We want to avoid an active for_each_reactor operation
while the reactors are being shut down.
Fixes issue #1766
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I30bc258c5b22545320080d269a1ed8cb0b4e12f2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6104
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is a chance that admin qpair is being destroyed at
the moment when IO qpair is added to a controller due to e.g.
expired keep alive timer. Part of the qpair destruction process
is change of qpair's state to DEACTIVATING and removing it
from poll group. We can check admin qpair's state and poll
group pointer before sending a message to poll group's thread
and fail connect command.
Logs and backtrace from one CI build that hit this problem:
00:10:53.192 [2021-01-22 15:29:46.671869] ctrlr.c: 185:nvmf_ctrlr_keep_alive_poll: *NOTICE*: Disconnecting host from subsystem nqn.2016-06.io.spdk:cnode1 due to keep alive timeout.
00:10:53.374 [2021-01-22 15:29:46.854223] ctrlr.c: 185:nvmf_ctrlr_keep_alive_poll: *NOTICE*: Disconnecting host from subsystem nqn.2016-06.io.spdk:cnode2 due to keep alive timeout.
00:10:53.374 ctrlr.c:587:41: runtime error: member access within null pointer of type 'struct spdk_nvmf_poll_group'
00:10:53.486 #0 0x7f9307d3d3d8 in _nvmf_ctrlr_add_io_qpair /home/vagrant/spdk_repo/spdk/lib/nvmf/ctrlr.c:587
00:10:53.486 #1 0x7f93077ea3cd in msg_queue_run_batch /home/vagrant/spdk_repo/spdk/lib/thread/thread.c:553
00:10:53.486 #2 0x7f93077eb66f in thread_poll /home/vagrant/spdk_repo/spdk/lib/thread/thread.c:631
00:10:53.486 #3 0x7f93077ede54 in spdk_thread_poll /home/vagrant/spdk_repo/spdk/lib/thread/thread.c:740
00:10:53.486 #4 0x7f93078366c3 in _reactor_run /home/vagrant/spdk_repo/spdk/lib/event/reactor.c:677
00:10:53.486 #5 0x7f9307836ec8 in reactor_run /home/vagrant/spdk_repo/spdk/lib/event/reactor.c:721
00:10:53.486 #6 0x7f9307837dfb in spdk_reactors_start /home/vagrant/spdk_repo/spdk/lib/event/reactor.c:838
00:10:53.486 #7 0x7f930782f1c4 in spdk_app_start /home/vagrant/spdk_repo/spdk/lib/event/app.c:580
00:10:53.486 #8 0x4024fa in main /home/vagrant/spdk_repo/spdk/app/nvmf_tgt/nvmf_main.c:75
00:10:53.486 #9 0x7f930716d1a2 in __libc_start_main (/lib64/libc.so.6+0x271a2)
00:10:53.486 #10 0x40228d in _start (/home/vagrant/spdk_repo/spdk/build/bin/nvmf_tgt+0x40228d)
Change-Id: I0968eabd1bcd532b8d69434ad5503204c0a2d92b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6071
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Also, move all the functions wrapping the scheduler app into
common.sh.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I63c1002f867128851cff04a035c6c51c50e10383
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6053
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_reactor_set_interrupt_mode will send event to set
reactor into interrupt mode or poll mode, also set every
notify_cpuset on all reactors for consistency.
It can be used by RPC method or scheduler to set
reactor to interrupt mode while workload is lightweight.
Currently, this function is limited that the specific
reactor should have no attached spdk_thread.
Change-Id: I7e8f449bff1184b9a7948f80b9572066a19da60f
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5853
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Each bit of the cpuset indicates whether a reactor
is going to be in interrupt mode.
Each spdk_cpuset is allocated to each reactor. So it
can only be touched by its reactor.
Change-Id: Ic186de341588b701d7471bf09336309d28b1bf4e
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5850
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Those spdk threads were neither used or tracked in event framework.
Needed to edit hardcoded cpumask value in spdkcli test to accept any string.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ieffea1bdf467f50ec0bd3af4b17a1d259fd876b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The VFIO container must have at least one device present to
be able to perform DMA mapping operations. Instead of using
the count of SPDK devices, use the count of DPDK devices. This
allows for the user of SPDK's memory management APIs even if
only a DPDK device is attached.
Change-Id: Ie7e21f09bdf1cdf1a85424c35212f64f24ae4e26
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This also introduces scheduler tests in the autotest pool.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I892a2374e21dab0e349c655dcafaa4cc2e45fdc1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5741
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Setup boils down to selecting CPUs for exclusive use by SPDK
app(s).
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie3af44d16f3f220aeca97b2d65a99297016884dc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5739
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This main goal of this "library" is to provide the following:
- Handling view of the cpu|numa topology as seen by the kernel
- Mapping cpufreq subsystem to cross-reference it with how
DPDK's librte_power governor behaves.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I0fca41eefeea3949102e7546c227e0d36811a269
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5738
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This tool simply returns contents of EAX|ECX registers for a specific
MSR. Targeted use is to compare DPDK's governor results while working
under intel_pstate driver.
Change-Id: I40b3f3601d41e45ba65c96b99ebd1b6949b5af20
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5737
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is an application designed to provide custom RPC
interface for testing scheduler and governor implementations.
Based on those RPCs scenarios later can be implemented to verify
functionality. Tests added here verify just the app itself.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I74b81234b95d815864cf8264705d728e3a7fe309
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5763
Community-CI: Broadcom CI
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We don't want to make main core 100% busy, so don't
move thread to it if thread busy time is higher than
main core idle time.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ib521ac0d8959ec8062322ff7b2ad587d85ccada5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5638
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Use DPDK based governor to change first core frequency
in dynamic scheduler. Core frequencies are adjusted
based on relative usages.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibeb9ca59fd67df27cfb0bfe752e66e5eef41b126
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This scheduler will group idle threads on first available
core and balance busy threads on other cores.
Change-Id: Ia0425c767dc3da2a66a9d82a20a0012fac83163c
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3901
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
DPDK 20.11 moved the kernel modules to separate
dpdk-kmod repository. It has to be built separate
from DPDK.
If needed for testing vm_setup.sh script now contains option
to build this driver.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I98a5eb956eb0cc60ec402d88fcdbd66d4854f19a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6033
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Check if E810 series cards are installed in system.
No need to check for specific model as all are RDMA
capable. See: https://ark.intel.com/content/www/us/
en/ark/products/series/184846/intel-ethernet-network
-adapter-e810-series.html
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If4c11ee5b65ca0f545100581782fa4263a92921d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5943
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Instead of rushing and probing all drivers for all NICs,
first try to check which RDMA drivers are already loaded.
Try only to use these NICs which drivers are already
available. This makes it easier to select which NIC
vendor will be used in test, as not all NICs will be
listed under /sys/class/infiniband (even if physically
present in system).
If for some reason a preloaded driver is detected, but
no physical NIC is seen in lspci - fall back to "old way"
and try to all NICs known to us.
Also includes code change to following if block, just
for style consistency in function.
Change-Id: Idc5756b5d4927b0ff11b5a37ed3729995f5c8f8a
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5948
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
CeonnectX-4 and X-5 share the same set of drivers.
mlx4_* drivers were mistakenly added for ConnectX-4
while actually they're used by ConnectX-3.
https://community.mellanox.com/s/article/mellanox-linux
-driver-modules-relationship--mlnx-ofed-x
Change-Id: I03de970fad6497c98a6873a25a5df66a0de8312c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5947
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The Zone Append command is an optional command in the Zoned Namespace
Command Set.
Zone Append differs from a regular write, in that the command is not
given an exact LBA of where to write the data.
Instead the user has to set the zslba field to the start of a zone,
and the data will be appended to that zone.
The actual LBA where the data was stored is returned in the
spdk_nvme_cpl, where Dword0 contains 31:00 of the ALBA field,
and Dword1 contains bits 63:32 of the ALBA field.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Change-Id: Iabae1b3456bfbb62c07b63d79afe9a14e460fe83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6013
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is used to create a script to test the
accel_engine. It can be used to test both software/hardware
approach in acccel_engine.
The first usage case is to add the crc32c test. More cases
can be added later.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I9f7564e39887265f8bbfce3a15ba446fbd7a14bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5974
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Due to recent change to vm_setup.sh we now expect
this module to be already provision in system and
available under /lib/modules.
Change-Id: Ica40e7ad95710f44bf538919e7a65878f416b7e4
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
igb_uio was removed from dpdk 20.11 and moved to
a separate repository:
http://doc.dpdk.org/guides/rel_notes/release_20_11.html
Because of that igb_uio module does not build as part
of dpdk meson build, and we have to build and install
it ourselves as part of test dependencies.
Change-Id: I4081bc3b0233ebaf5dbf926665edf28fa3463fbe
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6006
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In recent systems default is set to bfq which lowers
performance when using SPDK vhost.
Change-Id: Iefa3b8b514dac2f7b028cf06c18cee3f59c5a9ac
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5982
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Community-CI: Mellanox Build Bot
Detect which cgroups version is used to set IO
throttling in the guest system.
Change-Id: I4e7f482a8590dfe59da461cf5ef0a557b508fa98
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5981
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Static compilation for external_code tests uses SYS_LIBS
that now includes libvfio-user. As such the COMMON_CFLAGS
need to point to the build directory.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6f3aa670a62445088535eacdfa1483bfacd5ce7b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6020
Community-CI: Broadcom CI
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
POSIX defines PRIx64 for printing 64-bit values in a portable way.
Replace references to %lx to remove the assumption about the size
of a long.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I40374212baf64028f77f87c3a7f0373f6cdb1415
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6003
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Users can now generate the necessary linker args for their
own applications using something like:
PKG_CONFIG_PATH=build/lib/pkgconfig pkg-config --libs spdk_nvme
Dependencies between libraries are included in the generated
.pc files, so the user only needs to pass the top-level subsystems
or individual SPDK libraries they are using in their application.
Modules will automatically be added to the output if the associated
library is specified. For example, specifying "spdk_bdev" will include
the libraries not only for spdk_bdev, but also all of the bdev modules.
Users still need to supply the -Wl,--no-as-needed or -Wl,--whole-archive
flags. They cannot be added to the .pc files without increasing the length
of the argument string by a factor of 15x to 20x.
Modify the test/external_code/hello_world Makefile to use pkg-config to
ensure this gets tested at some level in our autotest environment.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie48a75f11969d5d775d514cf10bcb82d197eabfd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4371
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
When NVMf target linked with vfio-user library, we can use
vfio-user client library to connect to the target.
Here is the three examples that can work with target:
identify -r 'trtype:VFIOUSER traddr:/var/run/muser/domain/muser0/8' -g
perf -r 'trtype:VFIOUSER traddr:/var/run/muser/domain/muser0/8' -g -q 1 -o 4096 -w read -t 10
reconnect -r 'trtype:VFIOUSER traddr:/var/run/muser/domain/muser0/8' -g -q 32 -o 4096 -w randrw \
-M 50 -t 10 -c 0xE
You can run the following test script test/nvmf/target/nvmf_vfio_user.sh to have a quick test,
currently enabled with NVMe Identify,Perf,Reconnect tools.
Change-Id: Ieb9842b2f372184fffbf7f23e4aad26feb47c350
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3839
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are some common data structures and APIs in pcie transport
which can be used both for pcie and vfio-user transport, so move
the common code into a new header and source file.
No actual logic change just the code movement except remove the
static function declarations.
Change-Id: Ie9021e703a5780fdd6840f0e3cfea76a0017a811
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5923
Community-CI: Broadcom CI
Reviewed-by: sunshihao <sunshihao@huawei.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add two async API for Directive Send and Directive Receive.
spdk_nvme_ctrlr_cmd_directive_send;
spdk_nvme_ctrlr_cmd_directive_receive;
Signed-off-by: sunshihao <sunshihao@huawei.com>
Change-Id: Icb6974f74902df1512a5ffa9835188132634291b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5803
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
According to kernel, use an inline function spdk_nvme_bytes_to_numd
to transfer paload_size form bytes to numer of dwords.
Signed-off-by: sunshihao <sunshihao@huawei.com>
Change-Id: I8b9ded122bbf4a3c8e46988993ea52404783c0b0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5926
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
GCC 4.8.5 compains on missing braces:
nvme_tcp_ut.c: In function 'test_nvme_tcp_req_complete_safe':
nvme_tcp_ut.c:456:9: warning: missing braces around initializer [-Wmissing-braces]
struct nvme_request req = {0};
^
nvme_tcp_ut.c:456:9: warning: (near initialization for 'req.cmd') [-Wmissing-braces]
nvme_tcp_ut.c:458:9: warning: missing braces around initializer [-Wmissing-braces]
struct nvme_tcp_qpair tqpair = {0};
^
nvme_tcp_ut.c:458:9: warning: (near initialization for 'tqpair.qpair') [-Wmissing-braces]
Also structure spdk_nvme_qpair is embedded into nvme_tcp_qpair,
there is no need in a separate variable.
Change-Id: I3a9d6760a0cffe90ece0a6d470dda8309a6619e7
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5985
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Community-CI: Mellanox Build Bot
Record result of spdk_env_get_last_core() to
g_reactor_count, since spdk_env_get_last_core()
iterates through all core ids in a loop, it is
not so efficient.
Change-Id: I6bbbfec0bc25490bab33436c84fca3da6380cbe8
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5955
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Allow for alternative fio job layout.
"group" (default) will create X fio job sections for
X assigned CPUs and distribute available NVMes between
sections. (e.g. 4 CPU test with 24 NVMes will result in
4 fio job sections with 6 NVMes each and scaled iodepth)
"split" will create a separate job section for each
available NVMe, but still pin it to desired CPU thread
using cpus_allowed option.
This allows for alternative way of testing io_uring
which fails to run some cases with fixedbufs=true and
high iodepth values (caused by system-wide default
UIO_MAXIOV=1024).
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Iab835596a59f6437b067d1117208e5abd6c8d36b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5727
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Since now min supported DPDK version is 19.11, we can
remove handling of buffer that may be split over several
Memory Regions as it was specific for DPDK < 19.05
Change-Id: I61a79c80b864e3bdde134e8bff6622025ea578a7
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5937
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Sections 'Nvme', 'Nvmf', 'Bdev' and 'iSCSI' were always present in
the output of config_converter. Even when they were not present in
the legacy config.
This posed an issue with iSCSI section. Support for iscsi_set_options
is part of lib/iscsi, that is not compiled with all applications
(such as nvmf_tgt).
Fixes#1741
This patch checks if there is corresponding section in the legacy
config, and only then presents the JSON output.
Added test to verify output from empty legacy config.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ief94e92115dbd80c890dcb434b7c6d5376421c9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5879
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
JSON configuration that does not contain a particular
subsystem is a valid one. If needed, the defaults are always
present in the subsystem itself.
accel, interface, net_framework, scsi, nbd do not have
legacy configuration to convert. Including those in the
output of config_converter does not serve any purpose.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6442ac1b8f65ac7271102e782068846f86c2d09f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5878
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In this patch, we will use the accel library to do the crc32 work for the
header digest when sending the pdu in the target side.
For data digest support, will consider in the further patch.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I3169a158afd633f48bdbeb2cce1ed20e4141ae45
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5472
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Just change the test for QD=32 in order not adding the addtional
test time.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic801fffd904aecfd7ccdc89d04f67273dbdf2753
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5908
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is for packed ring and recover the ring
base when vhost target reconnect to QEMU.
Change-Id: I73f791b4a55adf9834112afd7dd7bb26c75a135d
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4128
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Need to manage how we store IO context based on DPDK updates
made in 19.11.
Fixes issue #1671
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: If1183808cd30987b6c999912f563949b7ade7fcb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5799
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
This attempts to mimic commit 2a860943b8 from DPDK repo to pass the
build under make 4.3. Currently, this affects Fedora33 which ships
with make 4.3 by default.
Change-Id: If3afa8ad9200d618f43bbea42360efbfe99d3085
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5779
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
"bdev_register" notification was sent right when register
happened, which was misleading for any listener.
Action on the registered bdev might not have been possible
when examine took longer time.
Order of bdev_register notifications in json_config test
was modified, because they are being sent out as pollers
for the spdk_bdev_wait_for_examine() are being processed.
This is only because pollers are inserted at the tail,
and processed from the tail as well.
Order of notifications should not matter, as long as bdevs
are ready for use.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I45b769f184b386df2daa4152ee766636ef0668ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5213
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since user/orchestration has no chance to call
bdev_wait_for_examine when loading json configuration,
this RPC is now always built into bdev subsystem json.
This behaviour was already there for SPDK_RPC_STARTUP,
see bdev_module_action_complete().
Yet it did not apply to SPDK_RPC_RUNTIME RPCs, as the
bdev module initialization was already complete.
Making sure all SPDK applications finish their startup
when all bdevs are ready to be used. See issue below:
Fixes#1675
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0f60f56932da020a15deeef09a5a1544f3a1bae6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5481
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add spdk_bdev_wait_for_examine() API to be called
in order to report when examine on all registered bdevs finished.
It will be built in to most bdev modules RPC.
New RPC added to allow
- building it into bdev submodule
- user/orchestration to verify examination status manually
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I27db3ae42eea3e692faeea4c2a01d04586bff438
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5480
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This fixes issue where scheduler is not being
initialized on first set.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I881438955f08852fb72187a2b92c7acfb12cd662
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5029
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As LLD cleanup is asynchronous in nature, Pass the
spdk_nvmf_transport_destroy_done_cb to LLD and it will be called
once the cleanup is completed.
Dont forcefully remove fc_ports by nvmf_fc_port_cleanup function.
LLD will drive the fc_ports cleanup gracefully as part of nvmf_fc_lld_fini.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I537b9ea817eda26a0469114821e2288d2ba9d91c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5827
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we dont have an api to delete fc port. Add SPDK_FC_HW_PORT_FREE
api. This is useful in cases of hardware reset and other error cases.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: Ib1b986ee7ab2f54043bd300b52121b651c292e5b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5810
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
1) As part of nvmf_fc_adm_evnt_hw_port_offline event, We try to remove
hwqps from pollgroup but we dont actually wait the action to complete.
Wait for the action to complete before completing nvmf_fc_adm_evnt_hw_port_offline
as this will serialise things nicely.
2) Protect fgroup->hwqp_count inside the transport lock as there can be
races where an fgroup can be removed paralley.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: Ib7af6bc0641c91e40331da2b2a7e72b5f55d54ae
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5808
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Current SPDK thread library has a issue which occurs if there is
a race between exiting thread and unregistering io_device.
For example, there are two threads. Thread 1 registers a device
and thread 2 gets a channel of the device. Then if thread 1 starts
exiting and unregisters the device, and then thread 2 puts the channel,
thread 2 sends a message to thread 1 to complete releasing the device,
thread 1 already moved exited. Hence thread 2 failed to send the
message.
This patch fixes the race issue. The code is verified by adding
a unit test case.
In detail, add a count, unregistering_dev, to struct spdk_thread,
increment it if a callback is specified to spdk_io_device_unregister(),
and then decrement it in _finish_unregister(), and thread_exit()
checks if it is zero.
The contents of struct spdk_thread is changed but it is not public
data structure, and hence suppress it for ABI testing.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idf5faa55335c3ea89f47ccce32687a6be2e26c68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5796
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
In the stress test of NVMe TCP (ARM platform, 6 nvme disks),
we see nvmf_tcp_req_set_state() takes quite some CPU cycles
(about 2%~3% of the nvmf_tgt process, ranking 6) moving TCP
request structure between different queues. And after some
analyzes, we think these actions can be saved. With this change
we get 1%~1.5% performance gain overall.
Change-Id: Ifd2f5609e4d99cab9fea06e773b461ded6320e93
Signed-off-by: Rui Chang <rui.chang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
According to 12.19 in iSCSI 3720.
"If DataSequenceInOrder is set to No, Data PDU sequences may be
transferred in any order."
So if the DataSequence is negotiated with "No", then we can
send Datainpdu in out of order manner. And the initiator will
handle this case.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia15f56c606e4f97af019f91fa1118cc9cac5daa7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5719
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This is done in order to track core dumps in a more efficient
manner. Till now, some cores could be missed if the binary was
executed outside of the cwd of the autotest (i.e. outside of
the spdk repo) but which was part of the critical path of the
actual test (e.g. fio in vhost-initiator tests). Also, since
core_pattern was set to plain "core", impact on the underlying
storage wasn't controlled either - if core was 20G in size,
this is what we would get. This could easly exhaust storage in
case error-prone patchsets were submitted on the CI side.
The collector will try to mitigate all the above by doing the
following:
- collecting all the cores, regardless of their cwd
- limiting size of the core to 2G
- compressing the cores (lz4)
Also, limit of 2 collectors executing at once is set - if more
processes crashes at approx. the same time, they will be logged
in the kernel log instead.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I5956a9030c463ae85a21bfe95f28af5568c5c285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add FC LLD specific port placeholder in spdk_nvmf_fc_port.
As part of SPDK_FC_HW_PORT_INIT admin API, Let the LLD know about
the new fc_port.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: Ib9300176d294642a1825577a31ad999590f5f29d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5711
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently we are iterating over a hwqp connection list for every
IO command received. With high load of connections, this is causing
penalty. Use hash table for connection lookup based on connection ID
and also RPI identifier.
Signed-off-by: Naresh Gottumukkala <raju.gottumukkala@broadcom.com>
Change-Id: I857e299722a0b72b25b0dbfe646d446ad98b7c76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5688
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Factor out the common operation of nvme_ctrlr_depopulate_namespace_done()
and nvme_bdev_attach_bdev_to_ns() into a helper function nvme_bdev_ns_detach().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8efa8bc2c2d455d0fd9e0865ff85fd265d14ee06
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5613
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Separate reference count of nvme_bdev_ctrlr between nvme_bdev_ctrlr
and nvme_bdev_ns.
Set ctrlr->ref to 1 when creating ctrlr, increment ctrlr->ref when
populating ns, decrement ctrlr->ref when destructing ctrlr or
when ns->ref becomes 0, and destruct ctrlr actually when ctrlr->ref is 0.
Set ns->ref to 1 when populating ns, increment ns->ref when
adding bdev to ns, decrement ns->ref when depopulating ns or removing
bdev from ns, and decrement ns->ctrlr->ref when ns->ref becomes 0.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7810384d97a174d8f55d316e5cdf2a9ef4a11432
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5608
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For further simplification, merge decrementing reference count of
nvme_bdev_ctrlr into nvme_bdev_ctrlr_destruct().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I604039c3f38a60b316ae465d4649e9eb11bfb6cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5573
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
destruct_poller had been used to destruct ctrlr after completing reset, but
we can remove destruct_poller and change reset processing to destruct ctrlr
after its completion by itself.
spdk_io_device_unregister() may fail spdk_for_each_channel(). Hence call
nvme_bdev_ctrlr_do_destruct() as the completion function of spdk_for_each_channel().
The first idea was to always run destruct_poller at nvme_bdev_ctrlr_destruct(),
but this patch will be simpler and more intuitive.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I43a400bdb67ab015d707fb9679693bd3d5bfb070
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5607
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
According to iSCSI 7143 spec 11.15.1 (3720 spec 10.15.1),
Rsph->response should be 0 if connection or session closed successfully.
The current code mistakenly compared cid provided by initiator with
inner conn->id parameter, which does not follow the spec.
Change-Id: I12dbb3471be5d49380c6b65bcdb67c57df11665f
Signed-off-by: ShadowMov <jinnian.hjn@alibaba-inc.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5731
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is done in order to workaround currently existing issues with
building spdk_abi_lts on systems with newer versions of the compiler.
Change-Id: I514580308f2cfbbffa13a821dcf72fc9fb60cd73
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5716
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I8b7777a89491b45ba785629679a34e0aa22f7e61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5543
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I5226c58f9993e0d1d8665ac75930ea952e474f05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I00998ce36b46902687065c5fa4684da9b7dd26d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
-A is equivalent to --pci-allowed, which recently
replaced -W/--pci-whitelist. But we missed adding
"A" to SPDK_APP_GETOPT_STRING, so -A was not actually
working.
Note that bdevperf was using -A to specify that timed
out I/O should be aborted. This patch changes it to
-X to avoid a conflict. It appears that something
broke with this option earlier this year though,
setting it has no actual effect. This should be
investigated separately from this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2f1aaf0af4e82ba3d08e91e6f9046d485cf04549
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The purpose of this patch is to make spdk_bs_opts
for compatiblity issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I26d2a6bc644feede64d48890c7903f224b1fc306
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5681
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch includes the following work:
1 Add two fields in spdk_bdev_opts structure and make the
two fields configurable.
2 Update the unit test in bdev_ut.c
3 Revise the set_bdev_options rpc call and add the support
to use the two new fields.
Change-Id: Idd6073b3a3ffaba8161e3ffa9444a9e533e67f6d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5664
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is optional to register i.e. most transports will not need to take
any action. It allows additional verification of ns/bdev capabilities
on transport layer before actual attachment to the subsystem.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I07d96b1d33c2d5433b951cb418ae1a89bf9caea5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5666
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
With new spdk_nvmf_transport_listen function it should be possible to
add generic options without breaking API/ABI. For now it only delivers
json parameters which can be decoded on a transport specific layer.
This is similar to what was done for spdk_nvmf_transport_create and opts there.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Iaf576248a0b10b408c4a3182785270be3e32ebe4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5570
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
-pthread is what SPDK in-tree Makefiles use, so use that
in the external_code Makefile too. -pthread can be
used both on the compilation and link stages.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8ef702b8fbde825a4191d961738ebc605b0aa4c5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5675
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The "external" module that we link against is essentially
a copy of the passthru bdev module in the modules/bdev
directory. But let's not use the same names for the
externally visible functions from this "external" module,
so that we don't get link errors if we happen to link
in both modules into one application.
This will help in a future patch where we use pkg-config
files to generate the list of the bdev modules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I835c7e7ee8902f6829657ec6a3cf40cd802a1357
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5674
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Our examples here show how to link in the DPDK environment
into an SPDK application. That includes both spdk_env_dpdk
library and the DPDK libraries. So put spdk_env_dpdk in
the DPDK_LIB variable in the Makefile.
This will also simplify a future patch where we will
use pkg-config in this Makefile instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2c389eaa9900dbe5f77ccee536bd4edc0a54cccc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5673
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
test/external_make wants to always default to
the autotest_common.sh HUGEMEM default which is
8192MB on Linux. But it is useful to be able to
override this to run this test in VMs with less
memory.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23a40c6c14e35cffefbaf4fa993ebd28d1b0054c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5672
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This avoids duplicating it in several different
Makefiles.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I85f4886ec6744c23639d24867e2c68757dfeba32
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4484
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
The following patches will need to update nvme_bdev_ns at
nvme_ctrlr_depopulate_namespace_done(). nvme_bdev_ctrlr can be
got from nvme_bdev_ns, and so this change will cause no issue.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7cbfe0d936a3a757a8792fdf842e1228b2df05e6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4531
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
get_traddr() was looking for INI configuration, however, gen_nvme.sh
now supports only json flavor. Use jq in such a case to get proper
traddr.
Change-Id: Ifb5e5e8b3cf3c7b21f67f6129173dcd09cecc6ec
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5578
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
When dumping results, include the LBA range used for the thread.
Also, to help with debug of verification erros, no longer use
rand data but instead use the current LBA. This can provide
a clue on data mismatch as to what might be wrong.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia02c35cf61ff2763c4a241314766e0bc65d18886
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5177
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Patch:
(d3d077cc) bdev: Solve the ABI compatibility issue related with spdk_bdev_opts
didn't include changes from day prior that added new code in bdev_ut:
(9697d84) test: add unit test for split IO
This patch fills in the gap in the UT.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifc6c27d740b45e8135061d0ae86965afaafbe1b2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5640
Community-CI: Broadcom CI
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This member is useless now, all tcp requests
are tracked using state_queue member.
Change-Id: I4771ec163e44202a5d98d356d8935b6e518575ff
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5576
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change prepares for the potential change in spdk-bdev_opts
in the future in order to maintain the ABI compatibility
Change-Id: I8ce24299173854c14c697bf7e28cf365c23f005f
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5597
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
