Change-Id: Id3ccec9f5d77d4125b9ef70e286caac83a0ac2fe
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/385159
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: I3842b654167345326979177ffdf3d10a33fae70c
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/385145
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: Ic6770371d9d62cbdd40ae0612eb4f7dceccd507f
Reviewed-on: https://review.gerrithub.io/383771
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1df83cbd6414a1bb8f54328c735950b9476e323b
Reviewed-on: https://review.gerrithub.io/384105
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Virtio spec say that any IRQ requests are only hints. So try to limit
number of interrupts generated by vhost by defining minimum interval
between sending IRQ. Coalescing is disabled by default. Can be enabled
using RPC command 'set_vhost_controller_coalescing'.
Change-Id: I9b96014d004ea0ea022b4498c6b47d30d867091a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/378130
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
First this change moves spdk_subsystem_fini() to trigger on
spdk_app_stop(). This ensures that spdk_subsystem_fini() is called
before reactors are stopped in spdk_reactors_stop().
Finish paths for subsystems, bdevs and copy engine is now
asynchronous.
Each of those three mentioned have to make sure they are
asynchronous as well.
Only bdev that currently has requirement for asynchronous finish
are logical volume.
Thus the change in vbdev_lvol.c making it move to next bdev module
only after all lvol stores were unloaded.
Fio_plugin finish of bdev and copy_engine was removed for now.
Next patch in series adds it back with async support.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I80ee2d084f3d82c50bf1329e08996604ae61b1b3
Reviewed-on: https://review.gerrithub.io/381536
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch adds new API to remove logical volume store
from device it is on. It is only used from RPC, when
user explicitly requests. It allows to use the device to
use as any other bdev.
vbdev_lvs_unload() is now only called from hotremove and
during application shutdown. Which makes it possible to
load it again during application start up.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If6452ecc3fff99237d1704ff7cd8de4d7133221d
Reviewed-on: https://review.gerrithub.io/382021
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There is a scenario where we can try do unload or remove
lvol store while lvol present on that lvol store is being
closed or destroyed.
Scenario:
1. send delete_bdev rpc command
2. command returns before lvol is actually closed/destroyed
(does not wait for callback)
3. send destroy_lvol_store rpc command
4. lvs is destroyed before lvol is destroyed
5. lvol destroy callback is called on destroeyd lvol store
Aboive scenario can be reproduced using:
spdk/test/vhost/spdk_vhost.sh --integrity-lvol-scsi
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie715279195bd4b1145cf05d4f5a8477b4fac87f7
Reviewed-on: https://review.gerrithub.io/383595
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently deleting bdev does not support asynchronous delete
operations. Because of that results are returned before device
is actually deleted and some operation can be peformed on that
device after removal of this device started.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I305c302d8abd5d7c2c0f947fca70c58396872132
Reviewed-on: https://review.gerrithub.io/383732
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I566a4d277ac1595fa7b4d630df52301a9abeec49
Reviewed-on: https://review.gerrithub.io/381629
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a name to each lvol which is persisted as a blob
xattr. lvol names must be unique within its
lvolstore.
While here, fix a few lvol_ut issues that were caught
as part of testing the lvol unique names. Also fix
a couple of tests that registered the wrong string
name with CUnit.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6d24d241e8f52158d14886f928d41823bbc93fa9
Reviewed-on: https://review.gerrithub.io/383567
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
There are some upcoming changes which will deprecate
the old lvsuuid_blobid name in favor of an
lvs_name/lvol_name name where these names are
user-specified.
In preparation for this change, rename the previous
lvol->name to lvol->old_name. This will allow us
to add a new lvol->name but keep the original
old_name during the transition.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I10deb219097fa8726c146ab2427ee7373933b97d
Reviewed-on: https://review.gerrithub.io/383534
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Each lvolstore now has a unique name which is persisted to
metadata. Eventually this will provide a friendlier
way to reference logical volumes, in the form
lvolstore_name/lvol_name.
This patch only covers the unique lvolstore name. An
lvolstore may not be created nor loaded if its name
conflicts with an already loaded blobstore.
Currently there is no way to rename an lvolstore to
resolve a conflict. This will be coming in the future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I842f13b79776e5b8f81e56de10778c35328e8cd3
Reviewed-on: https://review.gerrithub.io/383533
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
If we don't delete the super blob, this blob structure
will leak.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I56d0ca4884846aee0c7865f9c600d6c43811373c
Reviewed-on: https://review.gerrithub.io/383311
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
This will be used in a future patch to ensure we do not
allow creating or loading an lvolstore with a names that
matches an already opened lvolstore.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I37e8786f91cd578dd36fbec99ca23609419fc8f8
Reviewed-on: https://review.gerrithub.io/383012
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch introduces lvol store and lvols parameters saving
on persistent memories and loading it from saved data on app start.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia63f0cf3d6365d59f31c5f0a1724636bfe73b5b8
Reviewed-on: https://review.gerrithub.io/375764
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Unmap does not guarantee that erased blocks will return all zeroes.
using write_zeroes when unmapping metadata gives the
desired behavior for a blob.
Only metadata pages will be cleared with write_zeroes in this patch;
blob data clusters will still call unmap. This behavior may be made
configurable in a later patch (to allow the user to request zeroing of
clusters rather than just unmapping).
Change-Id: I1b210abac110867ce703bcfdeb634eb45aa9d5c9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/372004
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
if write_zeroes is not supported by the block device, we can get the
same behavior by simply writing a buffer full of zeroes to the blocks
we want to erase. I also incorporate splitting into the bdev layer to
accomodate large i/o.
Change-Id: I8fa1bfaaf22d7bfc6e3afb6e89d22fa9f7767e55
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/373829
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This goes along with previous patch in series.
Adding functionality to remove logical volume store from
device.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6338a35ed02838498a3cd9bb2dddd25803e65f79
Reviewed-on: https://review.gerrithub.io/382020
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently exposed API allows to load/unload and to
initialize blobstore on a device.
A spdk_bs_destroy() call is added in order to reach
functional parity with spdk_bs_init(). It was not
possible to remove blobstore from device from within
SPDK previously.
spdk_bs_destroy() takes blobstore pointer as argument
(instead of bs_dev), because blobstore has to be already
loaded to destroy it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2c493a4407868fcf08fd1766a19fc8463f634ef5
Reviewed-on: https://review.gerrithub.io/382019
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I3a86f28056e67b3c237441fb1048ca6ccd081ae7
Reviewed-on: https://review.gerrithub.io/383252
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Close and destroy lvol functions should support callback
functions so that they can be processed sequentially
and also give user result.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I9e87fb281916c65c17b2b7e54e91228844962048
Reviewed-on: https://review.gerrithub.io/383230
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some future patches will require specifying an lvol_store
name when calling spdk_lvs_init(). This means that passing
NULL for spdk_lvs_opts will no longer be an option. So
add an spdk_lvs_opts_init() (similar to spdk_bs_opts_init)
which will initialize a default value for the cluster size.
While here, prepend an underscore to spdk_setup_lvs_opts, since
this function is not part of the public SPDK API.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I155bcfd0c396017304bb3d58b7511ada71dade17
Reviewed-on: https://review.gerrithub.io/383030
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Always start bdev pollers on the calling core.
This removes the lcore concept from the bdev poller abstraction and
simplifies the job of spdk_bdev_initialize() callers providing their own
poller and event implementations.
All callers except the NVMe bdev hotplug poller already used the current
core as the parameter. The NVMe HotplugPollCore option was undocumented
and unused in any of the tests or example configuration files, so it
should be safe to remove.
Change-Id: I93b466e1e58901b8785c40cbe296fa46c157850f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382857
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added a wrapper for rte_ring_count().
Change-Id: Ia12fde3f250604a0f801309ed1c4706a311e7896
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382919
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously, spdk_trace_dump() took a const uint8_t * as the buffer, but
it is more flexible to allow any type to be passed (we are just going to
interpret it as an array of bytes anyway).
Change-Id: I1750316928cd330ed461bb513ff8af37e0170ef3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382854
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is required for virtio-initiator,
where multiple io_channels have to
share the same virtio queue. A single
poller will receive responses from
a virtio queue and send the completions
to the thread that submitted bdev_io.
Change-Id: I951c7655aaa17d41a680d437661afff27d2c3077
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382200
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Introducing bstype as a way to identify and verify
blobstore type.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I50267b5408625be10fe0c146ae329016d5509b4a
Reviewed-on: https://review.gerrithub.io/380476
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The SCSI spec defines two separate fields within the first byte of
the Inquiry data. Define them as bitfields and add enum values for the
peripheral qualifier field.
Change-Id: Ibbb158338da199fc1b67b04c52ec91633577c571
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/382713
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previously two spdk_events were allocated in spdk_app_start().
Now app allocated spdk_event for function to be called after
initialization is complete. Meanwhile subsystem allocates
its own spdk_event.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4822f76d30cc2f7b95a86a4ffbfc61b80c0a903e
Reviewed-on: https://review.gerrithub.io/382673
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I68a56666d30a550de4a2dc5a66fb669dfbad12dd
Reviewed-on: https://review.gerrithub.io/379659
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Current implementation supports only adding port to scsi_dev.
This change is required to support dynamic remapping of portals.
Change-Id: Idce49aeae43c8861ebe2807df853694f7bacf884
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/379931
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
bdev_opened field in spdk_bdev structure is no longer required.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ie4a368425b11b1c2e1a3a48b5858857b3935498b
Reviewed-on: https://review.gerrithub.io/381375
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ia6b6e5352ce4da04784fb0a3ea1efd0552650067
Reviewed-on: https://review.gerrithub.io/381548
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added a copy of DPDK's LCORE_ID_ANY.
It's returned by some env functions,
e.g. spdk_env_get_current_core.
Change-Id: I19079a5bd714e32c309e5078e8de97ff1849c0aa
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/382025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Closing the framework has to go through all subsystems
without failure, so return codes are unnecessary.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I53c9b4df12d2357e641130869f398b18637e6ff7
Reviewed-on: https://review.gerrithub.io/381681
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_app_fini() changed to void, as no operation within it
can fail with meaningful return code.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If77cbf745a8e3fcba4ea24411aa1816f3910cde7
Reviewed-on: https://review.gerrithub.io/381537
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
With this new API, callers can attach one specific ctrlr identified by
the transport ID directly along with optional ctrlr opts. If connecting
to multiple controllers, it is still suggested to use spdk_nvme_probe()
and filter the requested controllers with the probe callback.
Two primary use cases:
1) connecting to the NVMe-oF discovery controller
2) more straightforward way to connect a specific controller (avoiding
the probe callback)
A typical usage of this API with specific ctrlr_opts:
1. struct spdk_nvme_ctrlr_opts user_opts = {}
2. Call spdk_nvme_ctrlr_get_default_ctrlr_opts(&user_opts, sizeof(user_opts))
3. Modify the content of the initialized user_opts with user required value like
user_opts.num_io_queues = 8
4. Call spdk_nvme_connect(&trid, &user_opts, sizeof(user_opts))
Change-Id: Idf67ee5966f6753918c12604342c892d2f3bbe3a
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/370634
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This change is relating to add a new public API spdk_nvme_connect() under
include/spdk/nvme.h. This new spdk_nvme_connect() API will connect the user
specified trid and have a user optional ctlr opts. Rename this API and make
it as public.
A typical usage of this API as following:
1. struct spdk_nvme_ctrlr_opts user_opts = {}
2. Call spdk_nvme_ctrlr_get_default_ctrlr_opts(&user_opts, sizeof(user_opts))
3. Modify the content of the initialized user_opts with user required value like
user_opts.num_io_queues = 8
4. Call spdk_nvme_connect(&trid, &user_opts, sizeof(user_opts))
Change-Id: Ideec8247365ebf7dd15069e29821be8ea27b08be
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/380849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Move local copy of linux header code
to internal include/linux directory.
Change-Id: I81049ff956c72bb32c099a3087cf5f43de911ce4
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/381275
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Functionality of resizing logical volumes is currently
a work in progress, thus it is disabled in this patch.
It is no longer possible to use RPC and lib functionality.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I518e7196096f52e3ad9e91d658e1bb6c3301b688
Reviewed-on: https://review.gerrithub.io/380916
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Currently there is no way to know total space availible on lvol store or
how much is left after creating lvol bdevs.
Four new fields should were added to get_lvol_stores:
- total number of blocks
- number of free blocks left
- block size (currently always 4096, but should be known to user)
- cluster size
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I93dec2d4b2843f0ee51dc9883c8451cf55353f7b
Reviewed-on: https://review.gerrithub.io/381131
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
New optional parameter -c or --cluster_sz in construct_lvol_store() RPC,
as well as in vbdev_lvol and lvol lib API.
This parameter allows to configure cluster size of blobstore that lvol store
is build upon.
When this parameter is not specified, default of 1GiB is used.
spdk_lvs_opts struct was created to facilitate any future options when
creating lvol store.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ibfe8765ede3e78ff19c36f46043e4cec2e5c9f97
Reviewed-on: https://review.gerrithub.io/379356
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
This puts responsibility on the caller to free the buffer
and do any other cleanup associated with the partition base
(for example, GPT buffer).
While here, also clean up a bunch of places where on
various failures during initialization, it would just
free the buffer instead of calling spdk_bdev_part_base_free().
The latter is required to make sure the bdev descriptor
gets closed as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic000339459eca4a4a1d103da2e1f3feffe7e764f
Reviewed-on: https://review.gerrithub.io/378653
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
At very high queue depths, bdev modules may not have enough
internal resources to track all of the incoming I/O. For example,
we allocate a finite number of nvme_request objects per allocated
queue pair. Currently if these resources are exhausted, the
bdev module will return failure (with no indication why) which
gets propagated all the way back to the application.
So instead, add SPDK_BDEV_IO_STATUS_NOMEM to allow bdev modules
to indicate this type of failure. Also add handling for this
status type in the generic bdev layer, involving queuing these
I/O for later retry after other I/O on the failing channel have
completed.
This does place an expectation on the bdev module that these
internal resources are allocated per io_channel. Otherwise we
cannot guarantee forward progress solely on reception of
completions. For example, without this guarantee, a bdev
module could theoretically return ENOMEM even if there were
no I/O oustanding for that io_channel. nvme, aio, rbd,
virtio and null drivers comply with this expectation already.
malloc only complies though when not using copy offload.
This patch will fix malloc w/ copy engine to at least
return ENOMEM when no copy descriptors are available. If the
condition above occurs, I/O waiting for resources will get
failed as part of a subsequent reset which matches the
behavior it has today.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iea7cd51a611af8abe882794d0b2361fdbb74e84e
Reviewed-on: https://review.gerrithub.io/378853
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
A random host ID is generated per SPDK application startup if the user
doesn't specify a host ID during controller startup.
This also changes the default host NQN for NVMe-oF connections to a
random UUID NQN based on the host ID.
Change-Id: Ib0f70dd63e53087716842b412a1f134a9991d4da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/380528
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
