When the NVMe bdev module supports ANA multipath, struct nvme_bdev
will not have nvme_bdev_ns pointer directly and will get via
nvme_bdev_subsystem.
The patch series starting from this patch will change helper functions
to get both ocssd_bdev and ocssd_ns as parameters to make the
upcoming changes easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iacec2eadc9e56ae7b84ee3c313c8986f55983a08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5535
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
bdev_nvme_submit_request() calls bdev_nvme_get_buf_cb() directly
when the buffer is already allocated. This is for performance improvement
but will be helpful for the upcoming multipath feature to retry
read I/O submission because buffer should be allocated only once.
By reading the code a little more critically, bdev_nvme_submit_request()
can call bdev_nvme_readv() directly in this case, and do in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I005c70deabf7fbfe84b7029e9ef103ae122605e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5558
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvme_bdev_ctrlr pointer is already cached to nvme_io_channel.
Hence let's remove it from the helper functions, bdev_nvme_create_qpair()
and bdev_nvme_destroy_qpair().
The following minor fixes are done together in this patch.
Fix the error paths of bdev_nvme_create_qpair() because
bdev_nvme_destroy_qpair() cannot be used as is in this case.
When calling bdev_ocssd_destroy_io_channel(), check if nvme_ch->ocssd_ch
is not NULL instead of spdk_nvme_ctrlr_is_ocssd_supported().
Cache nvme_bdev_ctrlr to nvme_io_channel just before calling
bdev_nvme_create_qpair() because the pointer is more associated
with qpair.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic96b7d0fa27dd1f32d573eecdc9d4eacc5593bde
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5511
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Factor out each RPC configuration from bdev_nvme_config_json() and
bdev_ocssd_namespace_config_json() into a helper function, respectively.
These changes will make us easier to introduce subsystem into the
NVMe bdev module.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I297f3fb47893d45463e742834c58d2b1213a4b01
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5468
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When a device is removed, we should use the remove_cb
that was specified when the device was originally probed
and attached, if one was set.
Also add a new spdk_nvme_ctrlr_set_remove_cb API. This
can be used for cases where a different remove_ctx is
desired than was specified for the probe call. This
also enables setting a remove_cb when using connect APIs
which do not have a way currently to provide a remove_cb.
This also requires fixing the bdev nvme module, which
was depending on the previously errant behavior.
Fixes issue #1715.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id848b39040099ff7a21fe57ea6b194a8c25ae015
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5510
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It is recommended to read CSTS when there is a timeout.
If CSTS.CFS (Controller Fatal Status) is set, we should
reset the controller.
But if an admin command on a fabrics controller times
out, reading CSTS submits another fabrics command that
could also timeout. Even worse, we are recursively
polling the admin queue for completions in this case.
Fixes issue #1716.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23d31f6302375c52eba6f4370748d622fbd25ca7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5513
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This was missed when this option was added recently in
46a348597 (rpc: add keep alive parameter in bdev nvme).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I38fa2d4fc7c995bb0cea89b7b8cb51b2ce72aaa0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5512
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The backend device such as virtio-blk or virtio-scsi
may support the SIZE_MAX and SEG_MAX. Then SPDK needs
to split the big IO. Add this feature in bdev.
Change-Id: I2442e14121ccf141682964425e96382fec482af3
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4600
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add keep alive timetout parameter in bdev_nvme_set_options.
NVMe bdev can set this value especially when we test with
bdevperf.
Fix github issue: #1690
Change-Id: I255c935671b74cdb615a8d393e7d7e84524f3c23
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5306
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
SPDK supports two latest DPDK LTS releases and DPDK 20.11
is out now.
Remove all functionality and checks for versions <= DPDK 19.11.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9c354b7bc56d35a9ab04375f9f5255ca914d53e1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5344
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This can be done via explicit options on the
application command line instead.
This has the added benefit of removing a usage of
whitelist/blacklist which we are working to
remove from the SPDK repository.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5739e281f1c29fc8a5d175f5bbc916cd7d926fe4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5274
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In other places, nvme_ns->populated has been used to check an namespace
is active for an existing nvme_bdev_ctrlr. We do not need to call
spdk_nvme_ctrlr_is_active_ns() again. Follow it in this patch.
Besides, factor out the namespace comparison into a small helper
function bdev_nvme_compare_ns(). It will be used to check if two
controllers have the common namespace for ANA multipath.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8aad2f58aae1fd45ca0dd981dded1c406f215ac0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5359
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Previously, we separated two cases, creating an new nvme_bdev_ctrlr
and adding an new path to an existing nvme_bdev_ctrlr as early as
possible.
However, we can merge creating an new connection between these two
cases. In this patch, connect_attach_cb() calls bdev_nvme_add_trid()
and then calls spdk_nvme_detach() if the nvme_bdev_ctrlr whose name is
ctx->base_name already exists.
This will simplify ANA multipath feature.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2eec92dbf96e979690a1087c5c4fc306a29f15de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5329
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Move bdev_nvme_add_trid() up in a file to locate it before
connect_attach_cb(). The next patch will change bdev_nvme_add_trid()
to be called by connect_attach_cb() to merge the connect operation
for failover case.
bdev_nvme_add_trid() will be associated more closely with
connect_attach_cb() and bdev_nvme_create(). To make it clear,
move bdev_nvme_remove_trid() down before bdev_nvme_delete() too.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia5eb491baea57d715aadc07f206b94884334efaf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5328
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Even if we use TAILQ_FOREACH_SAFE(), it is not safe to lock and unlock
while linked list is parsed.
To fix such erroneous implementation, use SPDK message.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I79a126560ccd847149d4d06bb3d2111e43060ff7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5321
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Factor out the common operation to destruct nvme_bdev_ctrlr further
into an new helper function _nvme_bdev_ctrlr_destruct() from
remove_cb(), bdev_nvme_delete(), and bdev_nvme_library_fini().
The next patch will use SPDK message to fix the race condition
by locking/unlocking during linked list parse.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If5392bebcf830fac6165aa424b06aec0c9274dc8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5320
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Currently only nvme bdev module implements this interface. Bdev module
context (in this case spdk_nvme_ctrlr opaque handle) allows for nvme
interface usage for additional management.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I6302c9229d5f7f294a3c1472d9e8dc1519637ffb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The purpose is to reduce the duplicated functions
in posix and uring implmentation.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia0568b2490d362e7e78fa59b3ca88a60313ba0bd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5284
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is the end of the series to make the code of ocssd_bdev more
similar with nvme_bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9dfc2634292ec581d6787500e46e74ad3b95aa90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5251
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Extract and pass contents of spdk_bdev_io to I/O submit functions.
Besides, adjust the coding style for I/O submit function calls
with nvme_bdev.
The next patch will replace spdk_bdev_io parameter by bdev_ocssd_io
parameter for I/O submit functions.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2556d4a3c092d4ffacd47bbfc95db060da477bc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5250
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
nvme_bdev passes not spdk_bdev_io but nvme_bdev_io pointer to I/O
submit functions, and gets spdk_bdev_io pointer from nvme_bdev_io
pointer in its completion callback functions.
This is very clean because spdk_bdev_io is processed by the generic bdev
layer and nvme_bdev_io is processed by the NVMe bdev module.
The patch series changes ocssd_bdev to pass not spdk_bdev_io but
bdev_ocssd_io pointer to its I/O submit functions.
This patch is the first of the series and add ocssd_bdev parameter
to I/O submit functions. ocssd_bdev pointer is got from
bdev_io->bdev->ctxt. Hence this patch removes one dependency on
spdk_bdev_io.
One noticeable small change is that get_zone_info() gets zone_info
from not bdev_io->bdev but nvme_bdev->disk to advance removing
the dependency on spdk_bdev_io.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia3127ceb1fc8923e321a1404edbb19b63f5fde5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5248
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When we support ANA multipath, I/O path will get nvme_bdev_ns from
nvme_bdev_ctrlr->namespaces, and nvme_bdev_ctrlr will be got from
nvme_io_channel.
Hence this patch adds a pointer to nvme_bdev_ctrlr to struct
nvme_io_channel.
As a side effect, nvme_io_channel->ctrlr is helpful to simplify
admin command submit functions, and do it in this patch.
For ocssd_bdev, we will do the similar change later.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6976d1543ccda37dde4b81b2124d88f0d05ed7eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5055
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we support ANA multipath, we will use spdk_nvme_ns and
spdk_nvme_qpair pointers for I/O submit functions after checking
ANA state of spdk_nvme_ns.
It will be efficient and easy to understand if we unify such check.
The next patch will provide a helper function to do such check.
This patch changes the parameters of I/O submit functions as a
preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic741caa1d7e6df844b875beea776e79d4eb8d6fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5204
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
bdev_nvme_flush() just completes with success now and uses only
bio parameter now, but matching parameters with other similar I/O
APIs will be good for future enhancement and following patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I64be668fa781396ef68b6b506b22cb153d7b6850
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5203
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Using bdev_io->bdev will be more straightforward than using
bdev_io->bdev->ctxt and &nbdev->disk.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie5854ab063b7b21710e9f899dd93340624a8cb49
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5202
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This and the next change will enable us to pass spdk_nvme_ns and
spdk_nvme_qpair as parameters to I/O passthrough APIs. When we support
ANA multipath, ANA state of spdk_nvme_ns will be checked. These changes
follow that.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id38a0e14501ff6402f9b151eaf9e44864079412b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5200
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK virtio driver does not support the virtio legacy
device but it's ok for the modern and transitional
device. So update the probe function.
From the spec:
Transitional PCI Device ID Virtio Device
0x1000 network card
0x1001 block device
0x1002 memory ballooning (traditional)
0x1003 console
0x1004 SCSI host
0x1005 entropy source
0x1009 9P transport
Transitional Device: a device supporting both drivers conforming to
modern specification, and allowing legacy drivers.
Change-Id: I28cd277fb2b2e07a429082b7d7bd581f254eae9c
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5053
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
POSIX defines PRId64/PRIu64/PRIx64 for printing 64-bit values in a
portable way. Replace a few references to %ld to remove the assumption
about the size of a long. Similarly, use %z with size_t arguments.
Where the value being printed is an unsigned 64-bit value, use PRIu64
instead of %ld.
Signed-off-by: Nick Connolly <nick.connolly@mayadata.io>
Change-Id: I0ec4c0cb5e7a8f4b94a1ee6272c8df9ee7f06aa6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5141
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Using ocdev_io->io.zone to update zone is a little confusing,
and so cache zone pointer from ocdev_io->io.zone and use it for
clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iaee9b1fa8a86240022ddf5038a8c86b48476ba78
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5148
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This refactoring increases the code size slightly but improves
readability, and will make the following patches easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I704eca60fe98e4622e0d39d2e54ead63844156f6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5147
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is to improve readability even if the factored functions are
used only in a single place.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifa6c7ba4380124a957e66e31123e3743d83e7615
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5146
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Factor out getting chunk info. offset into a helper function
bdev_ocssd_to_chunk_info_offset() and locate it next to
bdev_ocssd_to_disk_lba(). This will improve readability a little.
Besides, cache addr_shift first in bdev_ocssd_translate_lba() for
clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4c078e2002638d90b000b97f9f7cda90938d02ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5132
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out the internal of bdev_ocssd_num_parallel_units() into an
new inline helper function ocssd_range_num_parallel_units(), and
apply the latter into a few functions.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16550046ed2d6f543f66711810b30bd45f21c970
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5130
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Clean-up bdev_ocssd_num_zones(), bdev_ocssd_get_zone_by_lba(),
and bdev_ocssd_get_zone_by_slba() to make a little easier to read
and understand.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I13c92dc86dc3855f1ec9ab5ae9d7097607f20512
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5129
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Cache the return value of bdev_ocssd_num_zones() in bdev_ocssd_init_zones()
to improve readability.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If71b40221694e512617389da03720211744f3b5c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5128
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Locating bdev_ocssd_num_parallel_units() and bdev_ocssd_num_zones()
closer to the related helper functions makes us a little easier to
understand the code.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0d96034bf26b2b1a39d879654ca2b30289349e4d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5127
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There are many duplicated codes about sending response for writing bool result.
That we need a function to do this.
Then we can reduce many codes.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic439111b1e9ca1013f8c657ab925f0c27a7be699
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5033
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Following a previous patch, cache pointers to spdk_nvme_ctrlr and
spdk_nvme_ns in bdev_nvme_dump_info_json().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I769d112f815e29262d52faee5ec17ccb914a7154
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5104
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
bdev_nvme_failover() updates trid of spdk_nvme_ctrlr using
spdk_nvme_ctrlr_set_trid(). Hence trid of spdk_nvme_ctrlr is always
up-to-date.
Hence bdev_nvme_dump_info_json() can query trid simply by calling
spdk_nvme_ctrlr_get_transport_id(). The queried trid is a const
parameter. Hence add const to nvme_bdev_dump_trid_json().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id04881f9e7596b910bdf26c4f14f1ebcb3cdbbee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5103
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
bdev_nvme_io_type_supported() queries NVMe driver to return if the
specified IO type is supported. To clarify it, cache pointers to
struct spdk_nvme_ctrlr and spdk_nvme_ns.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0956506e720722216e03cb808f61737ada617329
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5102
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In the following patches, nvme_bdev_subsystem will be added and nvme_bdev_ns
will be added to not nvme_bdev but nvme_bdev_subsystem.
To do it easier, factor out creating an NVMe bdev into an new helper
function nvme_bdev_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifa902912ba1ea979153b04ef4ac9fae10c09b7e2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5018
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_reset() has been called only by a single caller now.
Hence pass nvme_ch to bdev_nvme_reset() to queue I/O easily.
This will improve readability and clarify the logic.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idc22cb499fcf8455a2b04d44688f999344abc352
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4992
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Factor out the common operation between internal calls and bdev I/O
calls of bdev_nvme_reset() into an new helper function
_bdev_nvme_reset().
This is to improve readability and to clean-up the operation only
for bdev I/O calls in the next patch.
Replace bdev_nvme_reset() by _bdev_nvme_reset() for internal calls.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7580a8fb40d5a1d694d5f913cde770ca95a0b0c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4991
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
_bdev_nvme_reset_ctrlr will figure out what it really does.
_bdev_nvme_reset will be used by an new helper function in the
next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I890f962529a663ea412bcd416ef9ba31fadfbf61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4990
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
bdev_nvme_delete() had called nvme_bdev_ctrlr_get_by_name() and
then called remove_cb(). But nvme_bdev_ctrlr_get_by_name() had not
been guarded by lock and remove_cb() parsed the list again by using
spdk_nvme_ctrlr as a key.
These were not safe and efficient.
This patch refines bdev_nvme_delete() to inline remove_cb() into
it and acquire mutex before calling nvme_bdev_ctrlr_get_by_name().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibf39859809efa6f22899353c53b7b1eef58aa470
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4842
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add the second parameter remove and include path removal into
bdev_nvme_failover(). Additionally, bdev_nvme_failover() returns
only two return values, 0 or -EAGAIN, and hence change
bdev_nvme_remove_trid() to return the return value of
bdev_nvme_failover() directly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ife560f886e32ecec23691e01e87069502e27cc0c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4867
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
nvme_bdev_ctrlr_destruct() had checked first if poller is already
registered. On the other hand, nvme_bdev_ctrlr_destruct() had been
used as a poller function.
Hence nvme_bdev_ctrlr_destruct() had no way to unregister poller
if destruct and reset controller were raced.
This patch fixes the issue. The previous patch ensures nvme_bdev_ctrlr_destruct()
is called only once.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iba5424c42a4a3e5f03575df2616ec2a817e38f51
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4827
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Checking if destruct is false and setting destruct to true are
separated by mutex in remove_cb() and bdev_nvme_library_fini().
It was possible that multiple threads called nvme_bdev_ctrlr_destruct()
because the caller could call nvme_bdev_ctrlr_destruct() before
setting destruct to true after knowing it was false.
This patch ensures that nvme_bdev_ctrlr_destruct() is called only once.
Set ctrlr->destruct to true without releasing mutex after checking
if ctrlr->destruct is false.
If destruct is set to true before calling nvme_ctrlr_depopulate_namespaces(),
nvme_ctrlr_depopulate_namespace_done() may call nvme_bdev_ctrlr_destruct()
because it is likely that reference count is zero and destruct is true.
In this case, remove_cb() or bdev_nvme_library_fini() cannot call
nvme_bdev_destruct() after returning from nvme_ctrlr_depopulate_namespaces().
On the other hand, if a controller has no namespace,
nvme_ctrlr_depopulate_namespaces() does nothing and
nvme_ctrlr_depopulate_namespace_done() is not called. Hence
remove_cb() or bdev_nvme_library_fini() has to call nvme_bdev_destruct()
after returning nvme_ctrlr_depopulate_namespaces().
To unify both cases, initialize reference count to one as a sentinel value
and remove_cb() and bdev_nvme_library_fini() decrement reference count
and then calls nvme_bdev_ctrlr_destruct() if reference count is zero
after returning from nvme_ctrlr_depopulate_namespaces().
Additionally, add assert to check if reference count is not negative
to find bug in future.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8a617b5aa4d0a9faff832e63c2ed4b353341dd6b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4817
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
subnqn will be used to manage subsystem, and so add it to the output
of bdev_nvme_dump_info_json().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id28023754fa19d14aa9297f4e6676d235f024e0f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4974
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To improve readability and make the following patches easier,
factor out the common operation of bdev_nvme_create_cb() and
_bdev_nvme_reset_create_qpair() into bdev_nvme_create_qpair(),
and factor out the main operation of bdev_nvme_destroy_cb()
into bdev_nvme_destroy_qpair(). bdev_nvme_destroy_qpair() is used
in the error path of bdev_nvme_create_qpair().
Updating g_opts.io_queue_requests again is no harm and so is done
in bdev_nvme_create_qpair().
Use the term nvme_ch in bdev_nvme_create_cb() and bdev_nvme_destroy_cb()
for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie0a4251023037958d122fbb5d7ee72d42238b3ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4981
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This change will make the next patch smaller and its review easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2784fa74dce98676958180bbf80a9a4f938454db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5101
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Since spdk_sock_group_poll should do level trigger to
the callback func registered in spdk_sock_group_add_sock,
if there is data in pipe, but not event occurs, poll func
should still reap sock who has data in pipe.
Change-Id: If3a983f80fd04708e45ad0398c7d34018ec52bc7
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This change removes the necessity to get nvme_bdev_ctrlr by calling
nvme_bdev_ctrlr_get_by_name() and simplifies the code.
bdev_nvme_reset() checks if nvme_bdev_ctrlr->destruct is false first.
Hence we will not degrade stability.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7a3baab666644c3063af404905284c3e16bc62ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
OCF metadata updater is handling all the requests at once and when
it finishes the cache can deinitialize, so in the rare circumstances
when the thread is not aware of cache not existing any more, there
is another metadata kick request and check for the random pointer
is performed instead of expected cache.
The solution is to increase/decrease cache ref count prior sending
a message to a thread and after metadata has been updated.
Fixes#1533
Signed-off-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Change-Id: I77d2ae400110fcb4d491350e5fec334245f4bb90
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5030
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Calling spdk_nvme_ns_get_data(ns) on an inactive namespace will crash.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ib8cfa84e785a4a04dc3b1826c700a22eeec51e3c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5013
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Analyzer treats these as warning, they are unused.
Issue:
bdev_nvme_rpc.c:706:7: warning: Although the value
stored to 'rc' is used in the enclosing expression,
the value is never actually read from 'rc'
if ((rc = spdk_nvme_ctrlr_reset(firm_ctx->ctrlr)) != 0) {
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
bdev_nvme_rpc.c:851:8: warning: Although the value
stored to 'rc' is used in the enclosing expression,
the value is never actually read from 'rc'
if ((rc = spdk_bdev_open(bdev2, true, NULL, NULL, &desc)) != 0) {
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.
nvme_rpc.c:375:10: warning: Although the value stored
to 'rc' is used in the enclosing expression, the value is
never actually read from 'rc'
return rc = val->type == SPDK_JSON_VAL_STRING ? -ENOMEM : -EINVAL;
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I1d58db97b00ac2d102c1a46d7852c2ce3f559fda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If interrupt is set, related poller functions will be
registered to thread interrupt instead of poller.
interrupt_tgt can create aio bdev now.
Change-Id: Id777a55c8b7dc7a220f94ab837f7039ecea4fcb4
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4273
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
And to eliminate an artificial constraint on # of user descriptors.
The main idea here was to move from a single ring that covered all
user descriptors to a pre-allocated ring per pre-allocated batch.
In addition, the other major change here is in how we poll for
completions. We used to poll the batch rings then the main ring.
Now when commands are prepared their completion address is added to
a per channel list and the poller simply runs through that list
not caring which ring the completion address belongs too. This
simplifies the completion logic considerably and will avoid
polling locations that can't potentially have a completion.
Some minor rework was included as well, mainly getting rid of the
ring_ctrl struct as it didn't serve much of a purpose anyway and
with how things are setup now its easier to read with all the
elements in the channel struct.
Also, a change that came in while this was WIP needed a few fixes
to function correctly. Addressed those and moved them to a
helper function so we have one point of control for xlations.
Added support for NOP in cases where a batch is submitted with
only 1 descriptor.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie201b28118823100e908e0d1b08e7c10bb8fa9e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3654
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The new design:
* Supports a generic batching capability in the accel_fw layer
that keeps track of hw accelerated vs sw commands based on
the capabilities of the engine and processes sw commands in the
generic layer while sending a list of commands (not a batch)
to the engines for processing.
* Batch completions are managed via the generic layer, when using
the accel_fw the engines only process commands. With DSA however,
if a list of commands is sent down it will use the DSA public
API to create and send batches but will rely on the generic layer
to complete the batch task itself. When using DSA directly, batching
works as usual (DSA handles batch completion).
* The engine function tables were greatly simplified by replacing
all of the individual entries (copy, fill, crc32c, etc) with one
`submit_tasks` function that is used to both send lists of tasks
for batches or just one task for single shot API.
* Internally batching is now used to re-submit tasks that were queued
for flow control reasons.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I99c28751df32017c43490a90f4904bdabe79a270
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3555
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
This patch removes callback function for subsystems to
present their options for legacy config.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I63076fc03eff45da5d57fab03501602922a20e3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4749
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes function for bdev modules to
present options of the bdevs.
blob_bdev.h refers to the spdk_bdev_module, so would need
to be bumped too.
At this time spdk_bdev_module is left unchanged to prevent
that.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3cacb087c998d928c5d8c2722b7f041d82bb43f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4748
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
This patch removes legacy config support in iscsi subsystem.
All options through the legacy config are already reflected in JSON.
Following RPCs are corresponding to removed legacy config sections:
Initiator groups - iscsi_create_initiator_group and iscsi_initiator_group_*
Subsystem options - iscsi_set_options
Portal groups - iscsi_create_portal_group
Target node - iscsi_create_target_node and iscsi_target_node_*
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I11326a84d4d580b19db422b8522198eea5a5be0d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replace all calls of spdk_bdev_create_bs_dev_from_desc() and
spdk_bdev_open_ext() by calls of spdk_bdev_create_bs_dev_ext()
including unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idb9dc5a10f6e221c26e82e0194930cb7a2071dae
Change-Id: I61e577db9e26ef3e1c3e2e4093ad66922a178f34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4723
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change the first parameter of vbdev_lvs_create() from bdev pointer
to bdev name, and then remove spdk_bdev_get_by_name() from
rpc_bdev_lvol_create_lvolstore().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9b0e47f551657f6aa1235af37a8357b0af62d414
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4707
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_bdev_create_bs_dev_ext() gets not bdev pointer but bdev name
as an argument, and hence vbdev_lvs_create() will get bdev name
accordingly.
However after completing spdk_bdev_create_bs_dev_ext(),
vbdev_lvs_create() has to get bdev pointer from the created bs_dev.
Hence add a function pointer get_base_bdev to struct spdk_bs_dev
and set it to bdev_blob_get_base_bdev() at initialization.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idef0663ace85db0269442212014286669c150069
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4706
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a drop-in replacement. The following patches will remove
spdk_bdev_get_by_name() from the operation to create lvol store.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I31688cf98625f1d13012281d89f06d343e2f2cef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_bdev_open_ext() requires the caller to use bdev_event_cb_t
and bdev_event_cb_t is more extensible than bdev_remove_cb_t.
Hence use bdev_event_t as an argument.
spdk_bdev_open_ext() calls spdk_bdev_get_by_name() inside and
spdk_bdev_create_bs_dev_ext() calls spdk_bdev_open_ext() inside.
The caller needs to know if the spdk_bdev_get_by_name() succeeded.
Hence spdk_bdev_create_bs_dev_ext() returns return code by return
value and returns the created bs_dev by double pointer.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1c225bfb66db036439c69c459f39c86684d8a540
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
- Removed slew of conf.h includes
- No longer require mk vars that include conf
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica7e8e8bf1d4a5d0b0200bfe689aa13afd77bfaf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4746
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since legacy config is being removed, SPDK_ACCEL_MODULE_REGISTER
macro no longer needs field corresponding to processing this
type of configuration.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I76ca02487a5fb8f9ecc9d33ac6fa514e7226a03b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4636
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes legacy config support in ioat accel module.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iebaeef4cf648874700238f6167462f4958546be2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4635
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes legacy config support in virtio_blk and virtio_scsi bdev modules.
Most of the options through the legacy config are already reflected in JSON.
Exception to that is "[VirtioPci] Enable" option, which worked for virtio_blk
and virtio_scsi. It then on initialization scanned virtio_pci devices for
presence of blk/scsi. There is no RPC that scans it on demand, nor was it used
in any of the tests. So this patch removes that functionality,
if needed this can be reintroduced as new RPC (or two for each backend).
Module initialization for bdev_virtio_scsi changed to be synchronous.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib0978a4a084795e94993bb9122bd73ed49e14b96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch removes legacy config support in nvmf subsystem.
All options through the legacy config are already reflected in JSON.
Since the step in target initialization no longer does config
parsing, it was renamed appropriately.
There is no longer a need to delay this step via send msg,
since no callback is used.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5ee080bb1f5bf954f3b00545adb16e7176c35530
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4644
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
This is a step to prepare for deletion of conf.c.
Adding discovery subsystem is now moved out of parsing the legacy config.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idd36b5443541a1cc542d6837f17798bc6aaf17e9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4664
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a step to prepare for deletion of conf.c.
NVMe-oF target application always creates the default 'nvmf_tgt'.
This was done as part of legacy configuration parsing, but does
not belong there at all.
Acceptor poll rate and max subsystems are set via RPC before this
step, or via legacy config. Since this patch creates target before
parsing the config, options defined there no longer change the target.
Parsing of legacy config will be removed further down the series,
so no need to refactor to keep the original functionality.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6f87df0ad3f03b72d6f916de50e5eab6d29dafa9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4663
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a step to prepare for deletion of conf.c.
spdk_nvmf_tgt_conf was allocated either by RPC or legacy config.
RPC still had to to allocate that because settings for subsystem
are set before subsystem itself initializes.
This patch removed both allocations and just defines that in the
subsystem. nvmf_set_config RPC can now be called multiple times,
only overwritting values that were passed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5438a91c1d15070f1f193e29f2000c4b58ea4816
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4662
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch removes legacy config support in vmd subsystem.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I45f66809a889b39a05bf4f6856431d922b497c76
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4641
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Except for bdev_ocssd_submit_request(), we can pass nvme_ch instead
of ch to I/O functions, and do the change in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia9e09300d053fa80ada8286c8df7ec689bdb9aaf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4527
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This change follows the standard nvme bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I83486712d23668e2688e0f1353519cea6dd6fef7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4689
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This changes follows the standard nvme bdev.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8306fef00489b36b57065bde78ccf9d852b5cba9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4688
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This change follows the standard nvme bdev.
Two local variables used ioch for nvme_io_channel and they were
confusing. Rename them by nvme_ch too.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iad42d28e698c3cacc3ebc9df379fc7551bebcb55
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4687
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As same as the last patch, follow the pattern used by standard nvme
bdev about bdev_ocssd_submit_request().
Extract main operations from bdev_ocssd_submit_request() into
_bdev_ocssd_submit_request().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I286b4d82a356a3f1fac9c052397714cd7ee8497d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4525
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It looks that we do not have any special reason not to follow
standard nvme bdev about bdev_ocssd_reset_sgl() and bdev_ocssd_next_sge(),
and it will be good for ocssd bdev to follow standard nvme bdev.
Add iovs and iovcnt to struct bdev_ocssd_io and rename iov_pos by
iovpos and iov_off by iov_offset.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ied864dc9505b3f1c0a19a8a36031dda9e32eb4d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4524
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We have two functions, remove_cb() and bdev_nvme_library_fini() to
depopulate all existing namespaces.
Factoring out the operation into a helper function
nvme_ctrlr_depopulate_namespaces() will improve the readability.
Besides, change the line after return value for two functions to
adjust format.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibda921bdc94a50c14cca0ece462f76197efc5ccb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4642
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Swap the resetting case and the non-resetting case. Unlock mutex
before calling spdk_bdev_io_complete(). Use curr_trid instead of
tmp_trid to clarify the meaning of the stored value.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If3b520a16459aba498ac80ed887b9223ac5ca3d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4523
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Consolidating error paths will be helpful to create and associate
with the creating controller. Fix a couple of memory leaks in error
paths together.
Then rename create_ctrlr() by nvme_bdev_ctrlr_create() to follow
naming conventions and clarify what type of controller is created.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3f9073756198c0b0bc65b67ce84a41233297eac0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4509
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes legacy config support in uring bdev module.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I79f9b4458af2fdf0e4683f9cd82b64e9658c5fcb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4672
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes legacy config support in split bdev module.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iaa8e546bbd6357ba93af8164e2f3d8e497fcec06
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4634
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes legacy config support in passthru bdev module.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I53ee6e78d210c155a31ae6204472e89756e43e65
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4633
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes legacy config support in null bdev module.
All options through the legacy config are already reflected in JSON.
While here, added allocation failure check for g_null_read_buf.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I59a28a402e0c61e5636da623bc109e15b36f0584
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4626
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes legacy config support in malloc bdev module.
All options through the legacy config are already reflected in JSON.
Note that malloc_disk_count needs to be reset for each module initialization.
Otherwise for cases where bdev submodule is reinitialized, the count in
malloc names would grow. This should be addressed separately by making name
parameter required, rather than optional. Which is the case for most (all?)
of the other bdev modules.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ida93c74e7b0be7da19e11d5cc3fda9112824782f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4625
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes legacy config support in GPT bdev module.
Please note that disabling probing only for GPT partition does not
have a corresponding RPC.
Similar functionality is possible for all bdev modules at once via
`bdev_set_options --disable-auto-examine` RPC then followed by
`bdev_examine` RPC for particular bdev.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9a106b3dc0953166264b11c2e95c4433163fcd3c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4624
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is not really necessary to replace spdk_bdev_open() by
spdk_bdev_open_ext() for virtio scsi bdev, but spdk_bdev_open() has been
deprecated. Hence do the replacement in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I995c01c3c5842b306497e32099f6cfe767333091
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4725
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This is a drop-in replacement.
spdk_bdev_open_ext() requires the caller to specify event_cb.
Hence base_bdev_event_cb() calls hotremove_cb() only if event_cb is
not NULL.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I98cd29781412406470a173e9714c65a07288c573
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
To reduce the patch size, use local variables for descriptor and
bdev pointer before allocating the bdev_zone_block structure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie33fac33eeb39ccc2b016d2f9c1711fcf76ebd7a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4649
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
There are more transport on the way and we don't want to add
all their various opts into the single, generic structure.
We'll pass the JSON structure to transports instead. Then
the transport code can custom pull from the JSON any param
it wants.
To complement that, transports will now also have their own
JSON config dump callback. This was only done in the generic
nvmf.c so far, with conditions for RDMA and TCP.
Change-Id: I33115a8d56cec829b1c51311a318e0333cc64920
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: jiaqizho <jiaqi.zhou@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is just a drop-in replacement.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I018ef60648122aa672430bb62dc7b1a2e1cd5d7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4648
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change removes the call of spdk_bdev_get_by_name() from
raid_bdev_add_base_devices() by passing bdev name instead of bdev
pointer to raid_bdev_add_base_device().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1dc7bb6edbc23513f69e7acdf8ca735494338bfd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4592
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a drop-in replacement. Update unit test together, and the
idea of the update was from the unit test for zone bdev module.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia8d0644f42b9d0a0ad502eebbe3e414abd1de4cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4591
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
vbdev_crypto_claim() gets bdev name instead of bdev pointer
as a parameter, and open the corresponding base bdev first using
spdk_bdev_open_ext().
The purpose is to fix the race condition due to the time gap
between spdk_bdev_get_by_name() and spdk_bdev_open(). A bdev pointer
is valid only while the bdev is opened.
Resize event is not supported for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia0e1ce2ce696f431bb26af94729931c3ffb9a9d0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4588
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes legacy config support in error bdev module.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I348c19f560057b46030aa03adcca073f0906de0a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4623
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch removes legacy config support in AIO module.
All options through the legacy config are already reflected in JSON.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I43655ab8d3ca787a7e92072b195f3b73fcf4fdbf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
By design the opts for each implementation
can not match spdk_sock_impl_opts.
During get_opts for specific implementation
only used fields are filled.
Yet iterating over all spdk_sock_impl_opts fields
would yeild garbage values for unset fields.
This is the case right now when doing save_config RPC
with uring enabled. A garbe value for enable_zerocopy_send
is returned.
sock.c:829:62: runtime error: load of value 165, which is not a valid value for type '_Bool'
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie0512a7dffc36c8ff89256d08f8a2f4fefcf9e83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4699
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There is no good reason to track every single I/O
to the module and especially not at INFO level behind
a log flag.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I16a772ae4d49d3c1963ca223ef0bc2068b405988
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a drop-in replacement of spdk_bdev_part_base_construct() by
spdk_bdev_part_base_construct_ext().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0c719683b5a9cd6dffce057552982d8e44871ab1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Use spdk_bdev_part_base_construct_ext() to pass bdev_name and
remove the spdk_bdev_get_by_name() call. Remove the created configuration
only if non-zero return code other than -ENODEV is returned.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ieb5ee5d7e1ccc984df1e84205be18c7b93799bba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4579
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch removes the call of spdk_bdev_get_by_name() from
create_compress_bdev() by calling spdk_bdev_open_ext() and then passing
bdev descriptor to _prepare_for_load_init().
vbdev_init_reduce() returns the return code of spdk_bdev_open_ext()
directly if it is error to process the ENODEV case correctly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie80ce4104ceaa5726db976e33cd35352d5c91703
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4571
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previously bdev was closed after reduce initialization and was re-opened
before bdev claim.
This patch series will fix the race condition due to the fact that
bdev pointer is valid only while bdev is opened.
Hence keeping bdev open from reduce initialization to bdev claim
is better.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I00914db0aef8547c0826061bb0e500735b0b97a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4567
Community-CI: Mellanox Build Bot
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is nothing left here, so remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
vbdev_delay_register() gets bdev name instead of bdev pointer as a
parameter, and open the corresponding base bdev first using
spdk_bdev_open_ext().
The purpose is to fix the race condition due to the time gap
between spdk_bdev_get_by_name() and spdk_bdev_open(). A bdev pointer
is valid only while the bdev is opened.
Resize event is not supported for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib9f43965bcf28f8ca0d16fd2c73219253805f254
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4565
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
vbdev_passthru_register() gets bdev name instead of bdev pointer
as a parameter, and open the corresponding base bdev first using
spdk_bdev_open_ext().
The purpose is to fix the race condition due to the time gap
between spdk_bdev_get_by_name() and spdk_bdev_open(). A bdev pointer
is valid only while the bdev is opened.
Resize event is not supported for now.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib8894cf857ef814f6721e4244237c8156f147426
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4564
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Add an new API spdk_nvmf_subsystem_add_ns_ext() to pass not bdev but
bdev_name to fix the race condition due to the time gap between
spdk_bdev_get_by_name() and spdk_bdev_open(). A pointer to a bdev is
valid only while the bdev is opened.
spdk_bdev_open() has been replaced by spdk_bdev_open_ext() but the
issue still existed.
Update the corresponding unit tests accordingly.
Then replace the internal of spdk_nvmf_subsystem_add_ns() by
spdk_nvmf_subsystem_add_ns_ext() call.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifcaa2121129ef22d5e61c9a8f7c640ff37a64485
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4485
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.
Starting with this patch literal passed to register,
serves as name for the flag.
All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.
Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
Couple log flags did not follow previous scheme of naming
so rename it.
This will simplify next patch that replaces all the literals
with names provided for the flags. Avoiding accidental
changes in log flag names.
SPDK_NOTIFY_RPC -> SPDK_LOG_NOTIFY_RPC
SPDK_LOG_CRYPTO -> SPDK_LOG_VBDEV_CRYPTO
SPDK_TRACE_VBDEV_OCF_VOLUME -> SPDK_LOG_VBDEV_OCF_VOLUME
SPDK_LOG_JSON -> SPDK_LOG_JSON_UTIL
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I00cb0a7994d8aaf28b03828b93b1dbb18215089f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This makes it more in line with other flags.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I2d2f720a6cf1a6aa0cf3ddc0691c7ffc0adc43fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4538
Reviewed-by: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This clean up the code a little more. Use the term failover instead
of multipath in the error message.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b7fb8fe50b19b5639169c03f5242b9d6f14128b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4390
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
bdev_nvme_add_trid() is used once in the same file.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I738b7e959d13d419e090a019da6e7f1f09aa7109
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4388
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
PCIe failover is not supported yet and it is not possible that the
controller is included in g_skipped_nvme_ctrlrs for failover cases.
We can consolidate the code to create failover path in bdev_nvme_create().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ide456707a0b66a4b26eaf66392b9b53c3e659d9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This simpifies the code a little without any degradation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6006266e250f2d083aa12424809d04fac6a9f8f0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
_bdev_nvme_submit_request() already has a pointer to nvme_io_channel.
Passing nvme_io_channel simply to I/O APIs will be reasonable
simplification.
Two admin APIs, bdev_nvme_abort() and bdev_nvme_admin_passthru()
get the associated thread to the spdk_io_channel and set it to
nvme_bdev_io. These APIs get spdk_io_channal from nvme_io_channel using
the container_of macro. These APIs are not performance sensitive.
Using the contaier_of macro will be better than extracting the operation
from these APIs because we can keep the changes local to these APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I67985075d70551e4fe3bb84dfee15f1e4e882451
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4384
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When NVMe bdev module supports multipath, nvme_bdev will have multiple
nvme_bdev_ns, and I/O APIs need only nvme_bdev_ns. So change the parameter
from nvme_bdev to nvme_bdev_ns for I/O APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1e71abbab856112fdd6a333a89ba5f02f4e63ccd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4382
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a preparation to pass nvme_bdev_ns instead of nvme_bdev
to I/O APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I095478bc3ad305ba940fca101b74e74c7e8e74ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4381
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Struct nvme_bdev has a pointer to nvme_bdev_ctrlr and a pointer to
nvme_bdev_ns now, but nvme_bdev_ctrlr can be accessed via
nvme_bdev->nvme_ns->ctrlr, and so nvme_bdev->nvme_bdev_ctrlr is
duplicated.
The upcoming multipath feature will need struct nvme_bdev to have
multiple nvme_bdev_ns pointers.
Hence remove nvme_bdev_ctrlr from struct nvme_bdev and get a pointer
to nvme_bdev_ctrlr from nvme_bdev->nvme_ns->ctrlr.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ie5b785cb26e535c7186fe630c1f8b7d598b0ba46
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
LOCAL_SYS_LIBS is meant to define *direct* system
library dependencies for a given library. libuuid
is directly used by the SPDK util library and then
other SPDK libraries use uuid indirectly through
util.
So only the util library should include uuid in
LOCAL_SYS_LIBS.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia0d2d63f48e6f89891164cf2f9dc4c7a6476d4e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In NVME TCP initiator zero copy is enabled for IO qpairs
and disabled for admin qpairs
Change-Id: Ibdf521dccde9b95ec5dd15a5eb2baed8fcf8b88e
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A preparation step for enabling zero copy in NVMEoF TCP initiator.
This option will be used to disable zero copy
for admin qpair. This is needed since the admin
qpair's socket is not connected to socket poll group
and we can't receive buffer reclaim notification.
Change-Id: Ibfbb8a156aafcd7ba8975a50f790da7fbd37d96f
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4210
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We have some RPCs defined in the bdev library itself,
others in a separate bdev_rpc library. There's no need
for the separate library - just move them all into the
bdev library.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I298eedb88924197e64eb315369efb10f402903a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4364
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no need to have the application-level RPCs
defined separately from the event library itself
(which defines the application framework).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic264ed761f5ec1a40d604e63395c5740af4be1a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4363
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This RPC was originally put into the app_rpc library,
but the log_rpc library is a better home for it, since
other log-related RPCs are already there.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7ba5ac6cdeb57fb4219244690590c8fabbc3f59a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was not used by anything. It was intended for use by user-space
TCP stacks.
Change-Id: I416589e421784882c693bcc5b03fe1dbcc4b1bd3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4297
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The bdev layer nicely handles the case where we call this
function with the buffers already present - it just
immediately calls the get_buf_cb. But this adds extra
overhead in the case where the buffer is already present.
Since nvme has no alignment restrictions, we can just
check the iovs directly and avoid the extra call to
spdk_bdev_io_get_buf when possible.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I66df0fde574a35e995a3432999d75bdbf9b27212
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4317
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
write instead of writev
Call spdk_nvme_ns_cmd_write_with_md if there is only one iov element.
Use spdk_nvme_ns_cmd_writev_with_md only if there is more than one.
This is about a 15% improvement in I/Ops.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1a99b5507d37cde04e81feada65b14554ad01a17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
readv API
It's cheaper to call spdk_nvme_ns_cmd_read_with_md than it is to call
spdk_nvme_ns_cmd_readv_with_md, so do a quick check of the iovcnt and
use the best one for the job.
This is about a 15% improvement in I/Ops.
Change-Id: I82e6677d1ac47abf9919f95e651e7a7595c5e9a3
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4316
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The poller is now created internally to the library whenever a target
is constructed. Applications are not expected to poll for connections
any longer.
Change-Id: I523eb6adcc042c1ba2ed41b1cb41256b8bf63772
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When net.core.optmem_max is not set high enough, a call to sendmsg()
might fail with ENOBUFS. Currently this is treated as an error.
When we have no more buffer space left, we should continue to process
any completions and by doing so, free up the auxiliary buffers we ran out
of.
With this change I was able to run perf against the spdk target with a
purposely set to a low, value of optmem_max, where previously it would
fail.
This fixes github issue #1592
Signed-off-by: Jeffry Molanus <jeffry.molanus@gmail.com>
Change-Id: Ieeeed4fbecd827d0da815456b57fbe81495fe54d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4129
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
It aims to avoid bdev starvation by setting separate
io_context to each bdev_aio io channel and link them
into group channel.
Previous, each ch of aio_bdev on a same spdk_thread shares
same io_context. If one of them submits too many IO to the
io_context, then other channels will be starved.
Moreover, if the first bdev_io gets NOMEM error, then the
following IO of this bdev have no chance to get processed.
The bdev_aio starvation can be reproduced by bdevperf in
v20.04, by:
./bdevperf -q 100 -w randwrite -t 5 -c hdd.conf -o 1048576
(hdd.conf defines 2 aio_bdevs of HDD)
Change-Id: Ic709323f5baeb2f8f7250b75ad872ec4156b5e78
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3808
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI
This is important to avoid doubling up on state changes
and hitting asserts.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If8797ea13a5c224cee85e53e9b2542012423b37f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3759
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Not sure how this one was missed back during the big rename party.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia00819a2c2e8c81ad0499f4081667dde04fa726e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4140
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is used to enable placement_id getting
in sock layer and also add the rpc support.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I70de57b0ed392a0aefce9d3ff1f61ef924015a87
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4146
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In most cases, there is single element for iov array,
so using rbd_aio_read/write is enough.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Id3ccbb4a4ff10be9d4546c8e89e6dc596d0f3a72
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4122
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The timer poller could add the latency since we poll it every 50ns.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia3d0ec56658b9365fdd34b67663a3365eb738451
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
It is a good enhancement for the GPT vbdev module to support
interleaved metadata but interleaved metadata is not critical and
the priority is low.
However the following error log is always collected when there is
any bdev with interleaved metadata.
vbdev_gpt.c: 552:vbdev_gpt_examine: *ERROR*: GPT module does not
support block size 4224 for bdev Null0
This does not cause any failure but confuses user. Hence, change
the corresponding print from ERRLOG to DEBUGLOG.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id58507cbdc830d2b139fb34faa29e08d73c16141
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4058
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
When using --dif-type option --md-size should be
required as well.
Update & improve bdev_null_create rpc.py help
messages as well.
Change-Id: I6588a97aef6c8792bab7a41ece17c0461bb36844
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3949
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Allow toggling log timestamps on and off by adding new RPC call.
Change-Id: I34c84bf89fae352ade266fbf7fd20594ff67bced
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2024
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The type of sendmsg_idx is uint32_t, so the maximal
is 2^32 -1, so it could be overflow and get 0, so
we should fix it.
PS: I think that our code may have potential defect.
In my experiment, I try to init sendmsg_idx with 2^32 -1,
so the first req->internal.offset = 2^32 - 1.
But for the ee_info and ee_data in "struct sock_extended_err"
got from _sock_check_zcopy is all 0 in the target side.
So it means that the this req will never be completed.
With the increase of sendmsg_idx (the type is
uint32_t), sendmsg_idx will finally goto 2^32 - 1, so I
think it will still kick the issue I described.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ic9aaf629d73d5b7e2c81800a4f7f92c728adbc34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3948
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In function's error processing, the io_channel should
also be put back.
Change-Id: Ibd3a616244a77fcc29a5ec5d1d1ca53f5412e8c6
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3859
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The one large global mempool was a waste of memory for apps that
don't use the accel framework as its always allocated a pool sized
to handle a heavy load with multiple threads.
Instead move to a per channel list of just 1024 tasks greatly
decreasing the memory footprint but still able to scale as more
threads are added.
Also renamed all accel_req to acccel_taak and simply task to
accel_task as this was being touched anyways and not consistent.
fixes issue #1510
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I0e93ca6270323e2df4b739711c5d9b667a52e1eb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3740
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
if mountpoint doesn't exist, fuse mount will fail and @bfuse
will be null, blobfs_fuse_stop() try to access it without
check which cause segmentation finally.
Patch also improve test messages output to include
terminator properly.
Signed-off-by: Wang Shilong <wangshilong1991@gmail.com>
Change-Id: Idba23e3922778f1985d1f4841a1701cdc272ef17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3863
Community-CI: Mellanox Build Bot
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes implementation of VPP socket abstraction
along with ways to compile it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I089f7703cfc4fb517f8f80f4368e544bced549b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3734
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is used to implement the group polling
policy instead of each rbd has one poller.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ieb975e656240bcdaf2657410f010d72b156639ed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3698
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can use rbd_aio_readv and rbd_aio_writev to simplify the code.
Since it rbd_aio_readv/rbd_aio_writev are supported more than 2
years, so can replace rbd_aio_read/write without using "ifdef".
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I924a039110ceed59836c1b904b6e7f8db271ad62
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3697
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will allow us to use this RPC to detach only specific
paths from controllers.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ib52e38aa7d4ea096418a6dc0328481c2e8db6c54
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3070
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This RPC was using snprintf which could potentially
truncate a bad argument silently without alerting the
caller.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I1795b2e4086cbaa45390bd11b189755818b5c9e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3613
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
According to customers's report, there still exists
the Rados related thread contention with SPDK's reactor thread.
So also meove bdev_rados_context_init into bdev_rbd_handle.
With this patch, QEMU + SPDK vhost + Bdev RBD 's performance
can be improved.
Change-Id: Ie26a140f8d2cfe1a98cd1737f4ff70e9319cdc11
Signed-off-by: Yaowei Bai <baiyaowei_yewu@cmss.chinamobile.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3699
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a helper function iscsi_parse_redirect_addr() to validate the
passed IP address-port pair.
iSCSI login redirection will support only numeric IP address and
TCP port, and add AI_NUMERICSERV and AI_NUMERICHOST.
This function is almost same as nvme_tcp_parse_addr() and
nvme_rdma_parse_addr().
Besides, update error log in posix_sock_create() to use
gai_strerror(). gai_strerror() will provide more accurate
information as done by nvme_tcp_parse_addr() and nvme_rdma_parse_addr().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I65c6de81a64dcb26551ce796172d0458e1c298a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3357
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
TCP delayed ACK can be disabled or enabled by enabling or disabling
quick ACK, respectively.
The recently added spdk_sock_impl_opts is helpful for sock library
to control quick ACK.
Hence this patch adds and uses an option enable_quickack. The option
is effective only for the POSIX sock module.
We have spdk_sock_opts now too but spdk_sock_impl_opts will be better
for this case.
This option is not supported on FreeBSD. FreeBSD users can set the
option globally via sysctl if desired.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic89620267acce5872dc8ecaf7a99bb70ae97e993
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3603
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow us to further develop the ecosystem for multipath
failover support.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I24a8cf13e60e6cc0d5b6374da33c8a4e5b6c499a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3069
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows us to avoid creating a separate rpc just for multipath TRIDs.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4e83167eaf16e50a72efbd513333a4d09c52be61
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2884
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When we fail to process admin completions on a controller
attempt to failover to a previously registered trid
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I547bd010f4b339b2af7f2b33027cddad4b4926bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3045
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We are about to instrument some checks in this function
that will access the nvme_bdev_ctrlr struct directly so
pass that directly since the ctrlr is still accessible from
the nvme_bdev_ctrlr struct.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4e0d0d6c433149368e84275426362f8283903027
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3340
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is part of a larger series enabling failover at the bdev
layer for NVMe.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ic5c128244699c1a47275145ca7e41aa5f1366259
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3044
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch paves the way for introducing a tailq containing
multiple alternative paths to the same controller.
Change-Id: I13d30c12b8e0ce38eae687f9e76740be1d11e4d1
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3259
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Because of the Linux kernel has limitation, IORING_SETUP_IOPOLL is only
used for local devices (e.g., local files, pcie NVMe SSDs etc.). However,
it does not work for devices atttached from the remote. So in order to
make bdev uring generic, Let's do not use IORING_SETUP_IOPOLL to create the
uring.
Change-Id: I6aea1ff222a8a0d67ab040ada75aa0ef6730e725
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3587
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The pipe buffer has obvious performance influence on arm64. The
following is my test result with 1core, we can also enable it
on arm64 currently like the posix socket. And later we can find
the optimal pipe size that won't cause a degradation for large
payloads.
randwrite randread
512 byte 61% 97%
4096 byte 84% 16%
16384 byte -13% -17%
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Ib4df60751c5e06ef9bd7fc7bb7efafa5ad4de211
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3329
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
During virtio_pci_dev_probe, if enum_cb fails, hw needs
to be released. But in bdev_virtio, if vdev fails after
initialization, it will enter the bdev destruction process
which call the modern_destruct_dev function and hw will
be released during the process. So we will encounter the
problem of hw being released twice.
Change-Id: I1e8116283cfd810dfb050f8928f4ecd4bb2d815b
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3566
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
During virtio_pci_dev_probe, if enum_cb fails, hw needs
to be released. But in bdev_virtio, if vdev fails after
initialization, it will enter the bdev destruction process
which call the modern_destruct_dev function and hw will
be released during the process. So we will encounter the
problem of hw being released twice.
Change-Id: Ifba35284c072355ba0e10428b597a1894d32d59e
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3564
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Fixes#1498
When shutting down the application, it was possible to
reference stale ocf_cache pointer. This was the case
when two or more vbdev_ocf devices were based on top
of single cache bdev.
This issue did not occur outside of the shutdown case,
since RPC only allows deletion of the vbdev_ocf.
This erases on disk metadata and next run of the application,
would not detect such vbdev_ocf.
Shutdown meanwhile works different, by first stopping
the instance of running "ocf_mngt_cache" and later detaching
"core" devices (the ones being cached). This prevented
erasing the on disk metadata and allowed for restarted
application to detect vbdev_ocf.
See patch (1292ef2) for details.
Since references to ocf_cache are copied between vbdev_ocf
[see start_cache()], the reference count inside ocf_cache
was limited to original ocf_mngt_cache_start() and
management queue creation. First call into ocf_mngt_cache_stop()
released all references to ocf_cache. Leaving other
vbdev_ocfs pointing to released memory.
This patch works around this issue by increasing ref cnt
on ocf_cache for each vbdev based on top of it.
It allows to call into ocf_mngt_cache_stop(), but not
release the memory for ocf_cache until last vbdev.
Note:
A proper redesign here is in order:
- either rearranging structures to be based around single ocf_cache,
rather than multiple vbdev_ocf instances
- better use of OCF API to reduce book keeping logic in vbdev
There are plans to implement detach/attach in RPC,
so it should be a focus during that effort.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I560a7fbb1c052bf53970e655bdb60803c561a252
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There are additional conditions which SPDK tracks,
that are known before issuing call to OCF.
Two main ones are:
- if vbdev->ocf_cache was not yet created [start_cache()]
- if the cache bdev was opened [attach_base()]
Both happen for the first cache bdev once. Then for
consecutive vbdev_ocf on same cache bdev, reference
will be copied.
This call will simplify checking both conditions.
Calling into OCF with NULL or stale ocf_cache pointer,
rightly so will cause issues with ASAN.
Related #1498
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib202c15bda4cbbffa1516c69168e8bfb80370047
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3573
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added to the framework as well as all 3 engines. Needed by apps
in the event that they have to fail following the creation of a
batch, allows them to tell the framework to forget about the batch
as they have no intent to send it.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id94754ab1350e5a969a5fd2306bd59c38f0a0120
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3389
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To specify the desired logical block size. Must be 4K or 512.
If no block size is provided a default of 0 means to use the
underlying bdev block size. For cases where something other
than 4K or 512 is desired, format the underlying device
accordingly and don't specify a logical block size on creation
of the compress vol.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I58b71e210cfa77b3237c0c454585c734e2e22aea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3177
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The accel_fw API taks a uint8_t for fill pattern, the ioat build
command expects a full 64.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I55b33706a9e48fe7efd57a06816e11fdd8b7fa4c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3322
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was sort of a clunky interface requiring a couple of inline
functions in every app that wants to use the accel_fw moving
forward. By having the accel_fw public API accept a callback arg
instead of an accel_task combined with adding a pool of accel_tasks
in the accel_fw engine we can eliminate this.
After changing the parm to a cb_arg, changes were made to all accel_fw
interfaces to put cb_fn and cb_arg as the last parms in public and
private function calls.
Related bdev_malloc changes need to be in this patch in order to pass CI.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2b75764e534562d91484a094c3352266156d8425
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3209
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
With this patch, spdk_app_start/stop can be repeatedly
called by users based on their upper level application's
requirement.
Changes are:
* Add reinit ability inside spdk_env_init and related functions
* Clear g_shutdown_sig_received in spdk_app_setup_signal_handlers
* Clear malloc_disk_count in bdev_malloc_initialize
Change-Id: I2d7be52b0e4aac2cb6734cc1237ce72d33b6de0c
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2260
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently we provide a warning to users that the specified block
size doen not match auto-detected for AIO device, e.g.: the AIO
device uses 512B as the block size while users input 4096B when
creating SPDK AIO block device. However, the data alignment
required by kernel AIO device can use the auto-detected one,
we are over-committed for the alignment requirement, so here
just use the auto-detected block size.
Fix issue #1478.
Change-Id: Ia5d02bb66980cbe55ea7039488189d409315552e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Zero copy send can cause performance degradation with small
payloads. This patch adds an option to disable it if required. By
default zero copy is enabled.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I14f2b21ad375e770cb08f850360898bac675b351
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3344
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Receive pipe reduces number of system calls and gives significant
performance improvement with kernel TCP stack and relatively small IO
sizes. With user space TCP/IP implementations there are no system
calls and double buffering introduced by pipe has negative impact on
performance. Receive pipe remains enabled by default.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ic5ddee42293df2c233ba7ffbe6662de7917ac586
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3343
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also remove the batching check in accel_perf as all 3 engines
now support it.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ib4cf4b148b50df50a4fc7be9e861cc83f355623a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3155
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch has the basic infrastructure to support the accel
framework batching API but only for commands not HW accelerated
by IOAT, that will come in the next patch...
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I6168831ac5698a9e58a81ef35ce919d75a72d0f5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3153
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Also one small bug fix w/compare in accel_perf as a result
of changes made in accel_perf sicne base compare was added.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Id8e67bd9de9cbd006ac148f4a77807cc3e8e662b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2958
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Call recv to trigger busy polling even when no socket is active. when
epoll_wait returns zero, the first socket in poll group is used to
trigger busy polling in kernel stack and potentially reap incoming data
Change-Id: I15f04cb4a2c7b382dd07391eda69678fd7919790
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3180
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Bdev underneath lvs has a certain value set as block size,
then lvolstore inherits that as `io_unit_size`,
which ends up as block size for the lvol bdev presents.
Before this patch lvs on device with block size of 512,
would create lvol bdev with block size of 512.
Meanwhile reporting in bdev_lvol_get_lvstores(),
that block_size is 4k instead.
This was result of addition of io_unit_size and
forgetting to update the value here. Previously
only I/O of page_size was allowed.
This patch adjusts the value reported to
io_unit_size.
Alternatively it could have been removed,
or name changed to "io_unit_size".
Yet for API compatibility reason this name
remains.
Info on actual page size which is always 4k,
is not useful to bdev users. No need to add
another field for that.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I19701c408c389f64e25c027c7bba789294bbed94
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3289
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Use logical block size instead of base bdev block size in
vbdev_compress_claim. This is relevant to enable the compress bdev to
present a logical block size that is different from the block size of
the base bdev (e.g. 512B logical on 4KB base bdev).
However, this is just an internal fix/preparation and there is
currently not yet a way for users to specify a different
logical block size, e.g. through an rpc.py parameter.
Signed-off-by: Sven Breuner <sven@excelero.com>
Change-Id: Id7562f0da234ce11242b7ee78837a317ee51c211
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2858
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change NVMe bdev module to enable abort as IO type.
Change _bdev_nvme_submit_request() to process abort request when the
IO type is abort.
The current thread tries aborting I/O command in the I/O qpair first.
If no I/O command to abort was found, send message to the thread which
is registered when creating controller. The controller thread tries
aborting admin command in the admin qpair next. If no admin command
to abort was found, complete the abort request with failure.
spdk_nvme_ctrlr_cmd_abort_ext() is used to try aborting command whose
cb_arg matches. qpair is set to NULL when trying to abort admin command.
Before calling spdk_nvme_ctrlr_cmd_abort_ext(), save the current
thread to process admin command completion correctly.
spdk_bdev_abort() supports any bdev module other than NVMe bdev
module and does not check CDW0 but checks only if the completion
status is success or failure. So add bdev_nvme_abort_done() and
converts the NVMe completion status to the bdev completion status.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If6aebae0ba2f6c5834ee926e161af9c4d825f341
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2040
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add thread pointer to struct nvme_bdev_ctrlr. The thread which
created nvme_bdev_ctrlr is set to the pointer.
The thread pointer will be used to limit only one thread to submit
admin abort.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia39d5cbc7a13b0e0022c0d5591069ea8776ef774
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3244
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch only includes the basic framework for batching and the
ability to batch one type of command, copy. Follow-on patches will
add the ability to batch other commands and include an example of
how to do so via the accel perf tool. SW engine support for batching
will also come in a future patch. Documentation will also be coming.
Batching allows the application to submit a list of independent
descriptors to DSA with one single "batch" descriptor. This is beneficial
when the application is in a position to have several operations ready
at once; batching saves the overhead of submitting each one separately.
The way batching works in SPDK is as follows:
1) The app gets a handle to a new batch with spdk_accel_batch_create()
2) The app uses that handle to prepare a command to be included in the
batch. For copy the command is spdk_accel_batch_prep_copy(). The
app many continue to prep commands for the batch up to the max via
calling spdk_accel_batch_get_max()
3) The app then submits the batch with spdk_accel_batch_submit()
4) The callback provided for each command in the batch will be called as
they complete, the callback provided to the batch submit itself will be
called then the entire batch is done.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4102e9291fe59a245cedde6888f42a923b6dbafd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2248
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous lock protected against a channel counter, renamed as it
now protects multiple values associated with configuration and
reconfiguration.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icfe48aa7df192a7bdf568de418d49c7984d20acf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3175
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For some exceptional cases (e.g.,
https://github.com/spdk/spdk/issues/1486),
we may detect POLLERR or other events. So for those events,
we can just ingore it, but not use SPDK_UNREACHABLE.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I073575408783ff75e50b40d45ddf09388a2cab96
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3262
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Poller should return status > 0 when it did some work
(CPU was used for some time) marking its call as busy
CPU time.
Active pollers should return BUSY status only if they
did any meangful work besides checking some conditions
(e.g. processing requests, do some complicated operations).
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Id4636a0997489b129cecfe785592cc97b50992ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For base bdevs, we maintain a global list g_opal_base, and
for part bdevs, there is also a global list g_opal_vbdev,
so it's not necessary to use the configuration again, just
unpack it to opal part bdev.
Change-Id: Ia0943610dee3c194a80e44ed8eed8f2370d780fc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3106
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The base bdev's reference number is maintained in the bdev
layer, so we don't need to maintain it in this module.
Change-Id: Iffadbde2dbf35d934f273fdcb4b7d19e96394343
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2986
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
If the socks parameter(passed in uring_sock_group_impl_poll) is NULL,
we do not need to handle the sock_flush and prep the pollin task,
otherwise it will cause the assert issue when we reap the task when
we handle the nvmf_shutdown_tc3 issue.
Because in uring_sock_group_impl_remove_sock, we finally
set sock->group = NULL. Without this patch,
when we call uring_sock_group_impl_poll in this function,
pollin_task or write_task are prepared, then in the next round,
we will reap those tasks again.
PS: Error info can be found in
https://ci.spdk.io/results/autotest-per-patch/builds/19186/archive/nvmf-tcp-vg-autotest/build.log
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7e6deaa05e958b52e71e0bbf0ccdd20e35583685
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3031
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The error message is:
bdev_nvme.c:456:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable]
456 | int rc;
Reason: The CI testing pool will always use --enable-debug, but without this
flag, we will see complilation warning.
If we really want to catch this, it is better to really use this rc variable and print
some information.
Change-Id: Iec0ffcec4ec091d36044e3b36a9ac85e677b5c70
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3001
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we fail to process admin completions on a controller
attempt to failover to a previously registered trid
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Icdb43a726969fede4665f2fe59723dd90c5dad0d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2883
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is part of a larger series enabling failover at the bdev
layer for NVMe.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0d89e1afab8aeaa90237d0ba780d708154f6e3be
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2881
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
According to the description of io_uring_queue_exit:
Tear down function for io_uring. Unmaps all setup shared ring buffers
and closes the low-level io_uring file descriptor returned by the kernel.
So we should remove the close operatoin on ring fd.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I910c6e8acd935925b7985c2aa750df385004eb55
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2922
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Dual-cast copies the same source to two separate destination buffers.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icadae34a75c35e2db672a193287b147416012a5a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2129
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Calling spdk_nvmf_tgt_accept() now automatically assigns new qpairs
to the best available poll group.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I3df2a2c5a28dba45c5ba0cbd1e8c28dd7e56cf9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2813
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Delay bdev module does not support delaying zcopy I/O. So change
vbdev_delay_io_type_supported() to return false if the passed I/O
type is zcopy to clarify the use case of delay bdev module.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Icea5ae351d7139250710ce491e4ac466b0cc7f98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2622
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This addition enables us to test the new abort I/O feature on top of
any bdev which supports I/O type ABORT.
Add the abort I/O handler vbdev_delay_abort() into vbdev_delay_submit_request().
vbdev_delay_abort() aborts the target I/O if it is delayed to complete,
or calls spdk_bdev_abort() otherwise.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I191143357b95eeb56ada708d2d7ce30cf772bdcf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2602
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Improve reset I/O to abort all I/Os delayed to complete by parsing
all channels. The generic bdev layer stops new I/O submission during
reset processing. So freezing/unfreezing channels is not necessary.
Additionally, clean up the code which run if I/O submission failed.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I63e1ba78971944558d9317b63befecd86a6d6b60
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1993
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Passthrough bdev module sets the passed bdev_io to the cb_arg of
the bdev_io submitted to the underlying bdev. Hence call
spdk_bdev_abort() with bdev_io->u.abort.bio_to_abort for the I/O
type ABORT.
Passthrough bdev module returns the supported I/O type of the
underlying bdev. Hence vbdev_passthru_io_type_supported() is not
necessary to change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb7627a92409649ab08ae233ba517fbc1bc55a9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2799
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
As malloc bdev module supports I/O type ABORT, it will be helpful
if any bdev module other than NVMe bdev module supports I/O type
ABORT.
Update bdev_null_io_type_supported() to return true for
SPDK_BDEV_IO_TYPE_ABORT and update bdev_null_submit_request() to
try aborting the target I/O if queued.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4614c48840ef069a11991486d184d45789bc3000
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2798
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Malloc bdev module does not manage submitted I/Os by any list,
and so cannot abort any submitted I/O. However malloc bdev module
can always fail any submitted abort request.
Hence let's update bdev_malloc_io_type_supported() to return true
for SPDK_BDEV_IO_TYPE_ABORT and update _bdev_malloc_submit_request()
to complete with failure for SPDK_BDEV_IO_TYPE_ABORT.
This will enable us to use delay bdev + malloc bdev to test I/O
abort feature conveniently.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If4c411f5ab8589291ac90c10264d3ef30c06df83
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2797
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add spdk_bdev_abort function as a new public API.
This goes all the way down to the bdev driver module and attempts to
abort all I/Os which has bio_cb_arg as its callback argument.
We can separate when only a single I/O has bio_cb_arg and when multiple
I/Os have bio_cb_arg, but unify both by using parent - children I/O
relationship. To avoid confusion, return matched_ios by _bdev_abort() and
store it into split_outstanding by the caller.
Exclude any I/O submitted after this abort command because the same cb_arg
may be used by all I/Os and abort may never complete.
bdev_io needs to have both bio_cb_arg and bio_to_abort because bio_cb_arg
is used to continue abort processing when it is stopped due to the capacity
of bdev_io pool, and bio_to_abort is used to pass it to the underlying
bdev module at submission. Parent I/O is not submitted directly, and is
only used in the generic bdev layer, and parent I/O's bdev_io uses bio_cb_arg.
Hence add bio_cb_arg to bdev structure and add bio_to_abort to abort structure.
In the meantime of abort operation, target I/Os may be completed. Hence
check if the target I/O still exists at completion, and set the completion
status to false only if it still exists.
Upon completion of this, i.e., this returned zero, the status
SPDK_BDEV_IO_STATUS_SUCCESS indicates all I/Os were successfully aborted,
or the status SPDK_BDEV_IO_STATUS_FAILED indicates any I/O was failed to
abort by any reason.
spdk_bdev_abort() does not support aborting abort or reset request
due to the complexity for now.
Following patches will support I/O split case.
Add unit tests together to cover the basic paths.
Besides, ABI compatibility check required us to bump up SO version of
a few libraries or modules. Bump up SO version of blob bdev module simply
because it does not have any out-of-tree consumer, and suppress bumping
up SO version of lvol library because the affected struct spdk_lvol
is not part of public APIs.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I515da688503557615d491bf0bfb36322ce37df08
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Patch below added writing out json configuration for accel modules.
(fad052b0) accel: add write_config json for accel modules
Out of two current modules, only idxd reported its confi out.
When idxd was not compiled in, then "framework_get_config accel"
RPC did not return a valid JSON. Following JSON was returned:
{\"jsonrpc\":\"2.0\",\"id\":1,\"result\":}
Where "result" never had any property given.
This patch adds array object to encompas all accel modules.
Next patch in series will try to address the issue on JSON
level.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib0758db5406896f2a204920417619a3ab6fbde98
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2550
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Thus, we can make sure that when read data is larger than
the pipe size, it will not read the data into the pipe.
Change-Id: I87f3b03fd9b81eb693e9eae0fea9eef7d1b9eaa8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2450
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
When the initiator terminates the connection suddently, we
found the keep alive timeout issue, e.g.,
nvmf_ctrlr_keep_alive_poll: *NOTICE*:
Disconnecting host from subsystem nqn.2016-06.io.spdk:cnode1 due to keep alive timeout.
The root cause is that we did not closes the connection on our target side on time
whening using uring sock, and this patch can fix the issue.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I295f58bbdbae0ac3f5308f6eadef6a75c5ad07d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2544
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Warning:
ctx.c: In function ‘vbdev_ocf_ctx_log_printf’:
ctx.c:503:2: warning: ‘spdk_lvl’ may be used uninitialized in this function [-Wmaybe-uninitialized]
503 | spdk_vlog(spdk_lvl, NULL, -1, NULL, fmt, args);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
compiling with ocf module, here should add default.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I645a1044e58b63d5a58fde19baa3c125f97e0a7b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2603
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This reverts commit 79215d80c1.
Reason: Find the bugs while using batched. For example, if
we fetch 3 CQEs, A, B, C and put it in a cqes[] array.
Then we leverage io uring cqe seen to handle, Then we handle the
CQE A, then invokes the call back related with A. In A's call back,
it may also call the reap function (sock_uring_group_reap),
then the CQEs will be handled again. Thus the CQEs B and C can be already
handled. Then we will handle B or C again, then it triggers the error.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I67ece3b24e677b88d66d08722b00539693b42e1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2543
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
crypto_dev_poller() had set IO error to bdev_io->internal.status
but _crypto_operation_complete() checked io_ctx->bdev_io_status
and overwritten bdev_io->internal.status by spdk_bdev_io_complete().
On the other hand, internal fields of struct spdk_bdev_io should
have been avoided.
This patch fixes both.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia3d4887f34fdecc765b88246c3e66ce1871ff30f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1907
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Also, while we are here, consolidate setting SO_SUFFIX to one spot.
Previously, it was possible for a library to slip through
without an SO version.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4db5fa5839502d266c6259892e5719b05134518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This was overlooked when the module was merged.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ia7bd8710741bf5a82e7dd27925ecef1e59ed2938
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2360
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The spdk_opal_supported() is redundant with spdk_opal_dev_construct(),
because we only return the spdk_opal_dev structure when the drive
can support OPAL feature.
Change-Id: Ieadf271a0c8530f2440cded05ad139483a8c5937
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2383
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add the CRC function at the framework level and implement the
software engine back end to use ISAL. The patch series will continue
to include an option for accel_perf to test CRC as well as IDXD
implementation.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I4eff3bbcf98c0bc2928a48272a57031c8b96394e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2072
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The pipe buffer gives about 19% randwrite and 56% randread
performance boost on arm64 from my test. We can also enable it on
arm64.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Iff4c6eaffb4ec5ae8fe02b35f72aed7f6b272bb5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2255
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change OCF logger callback to
use spdk_vlog interface,
instead of manually deciding log level and
printing messages to a FILE.
This allows user to modify logging preferences
for OCF without modifying our OCF code.
Change-Id: Ibe526c97965acb9a5e9816446354e3a200d0cc31
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1947
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
