The NVMf target is being refactored to split the RDMA transport-specific
code into its own file. Once this is complete, we should be able to
plug in other transports and build the NVMf target without any RDMA
dependency if desired.
To enable this, change the CONFIG option to RDMA; it still controls
whether the whole NVMf target is built for now, but once the RDMA
dependency is actually made optional, we will be able to build the
generic NVMf target code without libibverbs installed.
Change-Id: I8cd90a9aaa85dcefcc9b0f8f2e7b6af21958b2a8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This never really made sense, so replace it with a list of
subsystems.
Change-Id: Ie7a9400083c091ac7142d01c23948200f515bdf7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Previously, we used cap_lo and cap_hi to represent the 32-bit halves of
the full CAP register. However, it is simpler to keep them in a single
64-bit structure, and is no less efficient on 64-bit platforms.
Also name the NSSRS field from NVMe 1.2, which was previously reserved.
Change-Id: I1d5d9b0dccbb12373b4aed3db29c883881d43223
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Make sure the reactor mask in profile take effect.
Change-Id: Ia471b2b88a711f05738cf93068c4f3a8c9a3039d
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This will allow removal notifications to be propagated to the library
user (e.g. for hotplug).
The callback is currently unused, but this at least prepares the API for
the future hotplug support.
Based on a patch by Dave Jiang <dave.jiang@intel.com>
Change-Id: I20b1c2dbf5e084e0b45a7e51205aba4514ee9a95
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use the knowledge that both the source and destination of
nvme_copy_command() are aligned to emit the aligned variants of the
SSE2/AVX mov instructions.
Change-Id: I0a7e32a3bb10b9a1920cd85691b79fa7172eecb3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Match the expected alignment for nvme_alloc_request() and nvme_malloc()
to allow optimized memory copy code to work even in the unit tests.
Change-Id: I546692a6df9615a12a8209618fb6159a9c9e426b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also finish up the req_state -> req conversion.
Change-Id: I131dd52dcd36a790b942e06f0207a3274cc04ffc
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fabric commands were skipping a step, so unify all
types of requests through the same completion path.
Change-Id: I5f38a7e1cdcdf33baf71486d5ddae9f5a6157fac
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This moves some definitions from nvmf_spec.h to
nvme_spec.h based on the latest publication.
Change-Id: I51b0abd16f7d034696239894aea5089f8ac70c40
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
It is always set to nvmf_process_async_completion and is only used
within the library.
Also rename nvmf_process_async_completion to spdk_nvmf_request_complete
to clarify its purpose.
Change-Id: Ie737fb60688329bfe329a8553c4a40ff2e5f8f1d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Everything necessary for processing an admin command is now stored in
nvmf_request.
Change-Id: I74e75a5b7bb3b406ad167c2b31cab1af7a1f270a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Everything necessary for processing an I/O is now stored in
nvmf_request.
Change-Id: I3f390707ebe83ea66a116dcfda4d0388a6823629
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Simplify the build rules so that common libraries are always linked.
Also fix up a couple of -lpciaccess instances that should have been
changed to $(PCIACCESS_LIB).
Change-Id: I4c50fa3aa59cae013d3385e38fbb830794299f6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
vtophys() was checking for out-of-range addresses incorrectly: vfn_2mb
is already shifted to account for 2 MB hugepages, but it was being
compared with a mask that did not account for the shift. This would
allow out-of-bounds access to the 128tb map array for certain invalid
addresses (it had no effect on addresses within the valid userspace
range).
Change-Id: Ida7455595e586494c9025f9ba65d050abb16b1b9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
NVMe opcodes contain a two-bit field that encodes the expected data
direction for each command. Add an enum and a function to extract these
bits.
Change-Id: Ie214319f121cf0899c6aa5663866f2988b128dd2
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Use SPDK_CU_ASSERT_FATAL instead of CU_ASSERT_FATAL so static analyzers
recognize that g_request cannot be NULL in the following lines.
Change-Id: Ie7ab3bd34a177bea0d565441014e8db12be8bb01
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
If spdk_json_number_to_int32() works correctly, it will initialize the
value of i32, but since this is a unit test, we should make sure i32 is
initialized to catch bugs.
Fixes a clang warning during scan-build.
Change-Id: Iecf0531d2992acf584b10e2de5f8c53553a9f3b6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The D3700/D3600 series support Controller Memory Buffer(CMB) feature,
CMB is available for holding submission queues, for those controllers
which can support submission queues in CMB, user can set the option
whether to enable it or not.
Change-Id: I8b0dc9e28dd6f5bb01bee99a532087212c04e492
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
When recursively calling spdk_json_write_val() on another object or
array, the child call will handle printing out the whole
subobject/array, so the parent call should skip over all of its values.
Also fix the return value for the array/object case - if we get to the
end of the array or object, we should return 0 for success.
Change-Id: I1da80c88ab8759620114c1ab141baaaaf9f0023a
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Resolve relative paths before using them to clean up command lines.
This should also help shorten the overall command line length that gets
embedded in the binary and used when locating the executable from a
coredump.
Change-Id: Ibff9849ede198bb04313496c8b7131485ffaf14f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Fix copy of uninitialized data in the unit tests.
Change-Id: Ib71a6fc90edb07f7ddac3067ff0efbda7938bf17
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch add support for Intel specific log pages :
marketing description page.
Change-Id: I87bccb2af286279598c9dd3c870094b384a0d2f7
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
For those controllers which can support end-to-end data protection
feature, add the support in the driver layer.
Change-Id: Ifac3dd89dec9860773c850416a6116113a6ce22a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Rename nvme_remove_child_request() to nvme_request_remove_child() and
move it next to nvme_request_add_child() to make the symmetry clear.
Change-Id: I78747c44ab3db1a656b33555a45f634dc5a55b31
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This can happen if the controller is still resetting as the SPDK NVMe
driver takes control.
Change-Id: I263ae8f2e7b271e0448450557452a115c90c4fb6
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch is used to add a nvme_request remove child
helpler function
Change-Id: I1e5bb228d53333ca3601f4ae30fcd801ea39e532
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The next_sge callback can be called multiple times for a single I/O if
the I/O is split. Get the physical address for each element once
instead of every time the SGL is walked.
Also bake the SGL element offset into the physical address.
Change-Id: I5d83426a234ffe9d13b89621077dbbb1561181c9
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
