Change-Id: I11b4bb2a0db20e6f86749cd951221a3697a72ed6
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4815
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
And to eliminate an artificial constraint on # of user descriptors.
The main idea here was to move from a single ring that covered all
user descriptors to a pre-allocated ring per pre-allocated batch.
In addition, the other major change here is in how we poll for
completions. We used to poll the batch rings then the main ring.
Now when commands are prepared their completion address is added to
a per channel list and the poller simply runs through that list
not caring which ring the completion address belongs too. This
simplifies the completion logic considerably and will avoid
polling locations that can't potentially have a completion.
Some minor rework was included as well, mainly getting rid of the
ring_ctrl struct as it didn't serve much of a purpose anyway and
with how things are setup now its easier to read with all the
elements in the channel struct.
Also, a change that came in while this was WIP needed a few fixes
to function correctly. Addressed those and moved them to a
helper function so we have one point of control for xlations.
Added support for NOP in cases where a batch is submitted with
only 1 descriptor.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie201b28118823100e908e0d1b08e7c10bb8fa9e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3654
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
gen_nvme.sh will no longer generate the legacy configuration.
"--json" option will still work for any current users of the script.
Tests were modified to no longer use the "--json" option.
Meanwhile others were simplified with switch to "--json-with-subsystems".
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8450be98660e54c64c27d8401fc40d649f9403ea
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4802
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
All options -c, --config and --json are valid, but have to
point to JSON configuration file.
Adjusted UT since JSON configs don't work with --wait-for-rpc.
Since this removes last reference to legacy INI configuration,
updated conf library to no longer mention the deprecation.
All uses of conf library are for explicit reason and not
related to SPDK event framework configuration.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic9a702465982daf715ce1c2ab863c48584734611
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If a host matching the removed hosts' NQN exists, it is now
disconnected.
Change-Id: I0bec29eda2dc220114b9197d4eb765899b9e1517
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4684
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
Prior to this patch the bdevperf application enabled using the zcopy API
by default. This means that on bdevs that don't natively support zcopy the
API emulates zero-copy by allocating a buffer. In my test environment, I
measured a 25% decrease in IOPS when zcopy was enabled. This patch changes
the default value so that zcopy is disabled by default. For bdevs that support
zcopy, use the -Z flag to enable using zcopy API.
Change-Id: Ib7e5c24f76eb16ffef038687daca58c0ffad1c1c
Signed-off-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4324
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The files for external_code tests were copies of the same files
in SPDK. Intention of external_code tests is to verify
that nothing breaks in regards to building process.
The copies were getting out of sync with functional changes.
So to address this:
- hello_bdev app is now symlinked
- vbdev_passthrough is copied from respective files
- RPC and name of the module were changed to not conflict with
the original passthrough module
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idb83b8a06dea7143505d2062b23bfb35c86e3274
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4804
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove spdk_app_get_running_config() that allowed printing
legacy configuration by the apps.
Along with usr1_handler callback that was used to call that
function.
It was only used in iscsi_tgt so it is removed there.
The app_repeat test was using SIGUSR1 to trigger a
spdk_app_stop/spdk_app_start cycle. But we can use
SIGTERM for that instead. While here, do a bit of
cleanup in the app_repeat test app.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie8449e8bcd979b237c68ef94f50fb7a3cb6c19db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4750
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I2866994df8a5f268d7dea2154e0df87786397142
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4685
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
As stated in a66c52fd this is racy and also masks out all potential
failures since wait() will not indicate if all processes succeded
or failed, it will return only with exit status from the last
process it handled.
Change-Id: I9e2b5d01ac8f951082e0b28eeae5455ecd0c8e74
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4680
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Newer compilers (gcc 10.x) shipped with, e.g., Clearlinux, Fedora32,
will simply fail upon hitting this error. Ignore it.
CPPFLAGS is used since CFLAGS would override its default options
defined in a Makefile breaking compilation on older gccs as a result.
Change-Id: I75c7938268736365a41b49373c948e779d57253b
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These are not understood by the older versions of the compiler, like
the one shipped with Centos7. The flags in question are:
-Wno-stringop-truncation
-Wno-unknown-warning-option
Change-Id: Icc29ebcf5080c908e23aa2df290a6c452f3e185c
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4671
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
During tests with new qcow2 image there is error:
ERROR: use the -f option to force overwrite of /dev/sdb1
when creating filesystem using mkfs.btrfs, adding -f
resolve this issue.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: If6548d3d5781e2b46f794422144e2a635e700559
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4660
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The virtio nvme was removed from SPDK, so this TODO
would never get implemented.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iafa701249ed3fafa45d028f2bb929a024b78a0b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4784
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This reverts commit cff7c8f1f797b2e17cef4f0299d08208a6e1ff1a.
DPDK submodule is updated with the actual fix:
(9471c59) vhost: fix external backends readiness
https://review.spdk.io/gerrit/c/spdk/dpdk/+/4219
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I130d1d0b7aab86f3eb2bf420aa8644d4607e1eeb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4783
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch removes callback function for subsystems to
present their options for legacy config.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I63076fc03eff45da5d57fab03501602922a20e3e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4749
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use spdk_nvme_detach_async() and spdk_nvme_detach_poll_async() with
a local variable detach_ctx to detach multiple controllers.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I77cdc07ddfcd97569e31eeb245cd4e5a26289dbd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4441
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use spdk_nvme_detach_async() and spdk_nvme_detach_poll_async() with
a local variable detach_ctx to detach multiple controllers.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I43428a41df2b6f26b62cf03990d35add9a3663d6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4440
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add two new helper functions, nvme_ctrlr_detach_async() and
nvme_ctrlr_detach_poll_async() to make the internal of
spdk_nvme_detach() asynchronous.
Use callback function to remove controller from the attached list after
completing shutdown and before freeing to avoid conflict between
attach and detach.
Update MOCKs in the corresponding unit test cases.
The next patch will add two public APIs spdk_nvme_detach_async()
and spdk_nvme_detach_poll_async() based on this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifbdfec2a1facde9354007c6248f280e245a36eed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Update a few print outputs to out not product name but bdev name
because bdev pointer is not available there after replacing
spdk_bdev_get_by_name() and spdk_bdev_open() by spdk_bdev_open_ext().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I624fea3a0a12c1049e950bddae8cea9f88b16db5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4702
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
From the log we can see that it reports ns_ctx was freed before it
was used. In unregister_controller, it still need ns_ctx to do io_complete.
And now this app works as a signle worker to do something.
Just need to change the order, execute unregister_worker after
unregister_controllers.
Fixes issue #1626
tested on clearlinux.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: I392ff168abb862ba236a24b775fb31bb341e2157
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4761
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
After the large effort of moving lvol tests from
python to bash, the original lvol.sh was removed.
Only lvol2.sh remained.
Just rename the script to its original name.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5c0a239b01c111f0b11f554caaebfec372877c6d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Using another flag for the conditional will let us
run release build test in selected job configurations
for per-patch testing on CI side, not just for nightly
tests.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ib9de1c98bf6d7380670f22321f2df7784f2517de
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch removes legacy config support in iscsi subsystem.
All options through the legacy config are already reflected in JSON.
Following RPCs are corresponding to removed legacy config sections:
Initiator groups - iscsi_create_initiator_group and iscsi_initiator_group_*
Subsystem options - iscsi_set_options
Portal groups - iscsi_create_portal_group
Target node - iscsi_create_target_node and iscsi_target_node_*
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I11326a84d4d580b19db422b8522198eea5a5be0d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Replace all calls of spdk_bdev_create_bs_dev_from_desc() and
spdk_bdev_open_ext() by calls of spdk_bdev_create_bs_dev_ext()
including unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idb9dc5a10f6e221c26e82e0194930cb7a2071dae
Change-Id: I61e577db9e26ef3e1c3e2e4093ad66922a178f34
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4723
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change the first parameter of vbdev_lvs_create() from bdev pointer
to bdev name, and then remove spdk_bdev_get_by_name() from
rpc_bdev_lvol_create_lvolstore().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9b0e47f551657f6aa1235af37a8357b0af62d414
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4707
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_bdev_create_bs_dev_ext() gets not bdev pointer but bdev name
as an argument, and hence vbdev_lvs_create() will get bdev name
accordingly.
However after completing spdk_bdev_create_bs_dev_ext(),
vbdev_lvs_create() has to get bdev pointer from the created bs_dev.
Hence add a function pointer get_base_bdev to struct spdk_bs_dev
and set it to bdev_blob_get_base_bdev() at initialization.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idef0663ace85db0269442212014286669c150069
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4706
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a drop-in replacement. The following patches will remove
spdk_bdev_get_by_name() from the operation to create lvol store.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I31688cf98625f1d13012281d89f06d343e2f2cef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Remove the stub for spdk_bdev_open() and use the DEFINE_STUB_V macro
to the stub for spdk_bdev_close().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I84df06b4b73e1f5af5c2c8854f1613e8a413533b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4729
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replace all spdk_bdev_open() calls by spdk_bdev_open_ext() calls
in the multiple SPDK threads cases of the unit tests for lib/bdev.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I65591f12f8737bb8a0c1256fa84c5b6dac481150
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4728
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Replace most spdk_bdev_open() calls by spdk_bdev_open_ext() calls
in the unit test for lib/bdev.c.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifbb8a7338b1d99808c96c87be1cfbee145b0d21f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4727
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
- Removed slew of conf.h includes
- No longer require mk vars that include conf
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica7e8e8bf1d4a5d0b0200bfe689aa13afd77bfaf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4746
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Legacy INI configuration is being removed this release.
This patch removes one of its options and always uses the
SPDK_APP_DPDK_DEFAULT_CORE_MASK as default core mask.
That can only be overwriten by -m/--cpumask arguments in app.
In bdevperf there was no reason to set reactor_mask to NULL,
as that was then still using the defaults.
Meanwhile bdev_svc will now check if user provided different
string via command line args to know if it should
unaffinitize its thread.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id882f8d7dbdd07b7743bd5981c37daa888b7872a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4619
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch removes legacy config support in bdev layer.
All options through the legacy config are already reflected in JSON.
Removed configuration can be set via `bdev_set_options` and
`bdev_set_qos_limit` RPC.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I24c365625540659cad425268d2aa41e3bf279d5d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch removes legacy config support in blobfs library.
Mostly reverting patch:
(97f3104) blobfs: Add conf parse for blobfs.
CacheBufferShift option in legacy config is not tested in CI,
and never received corresponding RPC.
If required the RPC can always be added later on.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I54e39f069047a243b2186ae5ea225ed452180488
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4668
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
The internal vhost library is used when DPDK's version
is older than 19.05 and the experiemntal vhost nvme
target.
For the CONFIG_INTERNAL_VHOST_LIB option, SPDK doesn't
enable this option by default over one year and CI
doesn't cover it either, so we may remove it with
this release.
As for the vhost-nvme target, since we are developing
a new vfio-user target solution, it's OK for us to remove
it now.
Change-Id: Ib2cce1db99cd09754307c2828b3187f2d4550304
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4562
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
After decoding a JSON object we had to free the parsed
strings one-by-one. Not anymore.
Change-Id: I819f1d533e397aa9babca58b5500c38ac01a963d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2753
Reviewed-by: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Instead of iterating over each symbol, create a regex group including
all the symbols to lookup and pass it to grep.
Also, refactor some small pieces:
- filter event_ dependencies within import_libs_deps_mk()
- convert SPDK_LIBS to an array built up with extglob
- drop DEP_LIBS
- drop missing_syms (unused)
The overall improvement (this covers the execution of the subshell
within which confirm_deps() is called for each .so):
real 1m23.688s
user 4m16.196s
sys 8m3.110s
real 0m3.537s
user 0m13.450s
sys 0m18.486s
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Id61c5f947cd116e0fa0107cc7c941beb2c0bdcb4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4632
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Also, move the check against IGNORED_LIBS to import_libs_deps_mk().
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I190262f728118d65c35481e490ca094086760cfa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4631
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function was recursively greping through the .mk file to map all
ref variables $(...) to values they are set to. This was including
plenty of duplicate entries which then had to be sorted|uniqed.
Instead, and to avoid recurssion, import the entire .mk file into
Bash's environment. The mapping would look like so:
JSON_LIBS := json jsonrpc rpc
DEPDIRS-event_vmd := event vmd conf $(JSON_LIBS) log thread
|
v
JSON_LIBS="json jsonrpc rpc"
JSON_LIBS() { echo $JSON_LIBS ; }
event_vmd="event vmd conf $(JSON_LIBS) log thread"
|
v
event_vmd="event vmd conf json jsonrpc rpc log thread"
Change-Id: Ibfcd52438403cd7638e01d2d5642c08822f85106
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Newer versions of readelf (e.g. from binutils v2.35) break the lines
in the following manner:
.... GLOBAL DEFAULT 14 restore_funcarra[...]
The symbol name is shortened, however, the way how it's indicated
with "[...]" may mess with any tools that look up this field with a
regex pattern - just like grep in the confirm_deps() test.
Currently, this test fails on clearlinux where the latest readelf
is shipped on board. To avoid it, make sure readelf returns full
name of the symbol with the --wide output.
Change-Id: Ief1a3dccde5481f603302ee714021dcebc20fc58
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4627
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's not needed. Add it to one of the UT where it
is needed though.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I06628184c22df68deffce3ca0561878569ccf3f4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4717
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There are more transport on the way and we don't want to add
all their various opts into the single, generic structure.
We'll pass the JSON structure to transports instead. Then
the transport code can custom pull from the JSON any param
it wants.
To complement that, transports will now also have their own
JSON config dump callback. This was only done in the generic
nvmf.c so far, with conditions for RDMA and TCP.
Change-Id: I33115a8d56cec829b1c51311a318e0333cc64920
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: jiaqizho <jiaqi.zhou@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
