Changed to 17 from 32 per conversation with Jim and moved to
header file so it can be shared with the vbdev module.
Change-Id: Ic516b6466bf21d21d8073e9180deaa9929c6b742
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463368
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Prints key info about a volume and its PMEM. As the metadata is
mapped, there's no real reason to dump all this to a file, it
can be accessed via gdb using the addresses printed out.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I2c7b8c32b6142ba0fded623a660b4d7d0c5b19bc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458117
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The unit tests don't really try to compress anything
yet, but this at least gets the pipeline in place.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic413850b30e4d9631f3ece2bab40d9026225e5b2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449097
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Let the application figure out how to close the
underlying block device after an init fails or
an initialized/loaded volume is closed/destroyed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id0b9b99c85ed13166ec9a229eaaa0b0eb04289fd
Reviewed-on: https://review.gerrithub.io/c/440573
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will remove the metadata from the associated backing
device and delete the pm_file associated with the reduce
volume.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I30ffd68e5ba69b31ee1be85418c5b8c592d82e70
Reviewed-on: https://review.gerrithub.io/c/437995
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Since commit 0b0af8f30b (reduce: calculate vol size from backing dev size)
removes definition of spdk_reduce_get_backing_device_size(), the declaration
of it should be removed as well.
Change-Id: Id5ce3776fa4e119ff771f6bee9c06e09bfc842ce
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/437217
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This more closely matches the sequence of events
a user will take in creating a compressed volume.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2311aed49e2a623feb9c5fbdbd25fb3201aeeeb5
Reviewed-on: https://review.gerrithub.io/436065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For write operations, copy data to req->buf and write
to disk.
If chunk already specified in logical map, read the
chunk first into req->buf, and overwrite with data
specified by the write operation.
If chunk not specified in logical map, fill logical
blocks not specified by the write operation with
zeroes.
For read operations, read chunk into req->buf first,
then copy relevant data into the buffers specified
by the read operations.
These operations are all functional, but have room
for future improvement. For example, this patch
will issue a separate backing read/write operations
for each backing block in the chunk - this could be
optimized to coalesce operations where the backing
blocks are contiguous.
While here, clean up freeing bufspace in one of
the error paths - this needs to be freed using
spdk_dma_free instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6dbf4fc9a8fdf0f5424b1f1f9178c79891c96d0d
Reviewed-on: https://review.gerrithub.io/434116
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Focus of this patch is adding the foundations of manipulating
the chunk_map and backing_block bit arrays and persisting
chunk maps and the logical map to the pm_file.
No data is writting the backing device yet. That will come
in later patches. This also does not rebuild the bit arrays
from the pm_file during spdk_reduce_vol_load - that will also come
in a later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib5336dbe907c253e545704471de8c4e812bbc157
Reviewed-on: https://review.gerrithub.io/434115
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
ziperrno was left over from earlier versions of this
patch set that used "sbzip" instead of "reduce".
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4159141b92727bb0a24db5f9aefcccaadc360d9e
Reviewed-on: https://review.gerrithub.io/436399
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will be the logical block size presented by the
compressed volume to differ from the backing device's
block size.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie4ef06e131d8e101a0c9ced228c56a02fcbfb7af
Reviewed-on: https://review.gerrithub.io/434113
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently the API requires the caller to open the
pmem file and pass the mapped buffer pointer, length
and pmem flag to libreduce using the spdk_reduce_pm_file
structure.
Let's have the library just do the pmem_map_file() instead.
Users then just pass the path to create the pmem file. The
library will still use the spdk_reduce_pm_file structure
internally - so move its definition out of the public header
and into reduce.c.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I81fcbfdfbb3211dca016d6aa422cf2e1ab16d84d
Reviewed-on: https://review.gerrithub.io/432593
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add the following to struct spdk_reduce_pm_file:
* path of the pm file
* pointer to the mmapped pm region
* whether the mmaped address is pmem or not
Now use pmem_persist or pmem_msync to persist volume
parameters. Note that we do *not* persist the pm filename
to the pm file - the pm filename will be written to the
backing disk in a later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1d873ae086dc20600798a49b98e1bf490ac750f3
Reviewed-on: https://review.gerrithub.io/430648
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A compressed volume will require both a persistent
memory region/file for per-chunk metadata and a
backing device to store the compressed blocks.
Add functions here to calculate the sizes of these
based on the desired size of the compressed volume,
its chunk size and the size of each backing block.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9203479e2a268c3ab0e2b0e06e348285e9d1cd13
Reviewed-on: https://review.gerrithub.io/430387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
reduce will be a block compression algorithm designed
specifically for SPDK. It is called "reduce" because
it reduces the data size on disk.
This patch just adds the shell of a library, include
files and unit tests. This will be fleshed out in
the rest of the patches in this series.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I88e238af64142a7c0e50ab7b447280026b55581f
Reviewed-on: https://review.gerrithub.io/430386
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
