This was removed in NVMe 1.2.1 ECN 002.
Change-Id: Icacd53c1f33043cf1c9f30bff1fb9dce1efa69b3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378681
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The Logout Request reason field is the low 7 bits of byte byte 1; the
last bit of byte 1 is specified to be always 1, and we shouldn't
consider it to be part of the reason field.
The existing debug print code was parsing the reason field correctly (by
masking it against 0x7f), but it's simpler to just make the reason field
into a bitfield of the proper size; this fixes the real bug in the
reqh->reason != 0 check, which did not use the 0x7f mask.
Fixes GitHub issue #198.
Change-Id: I4813da2236c70dc1761e303b34d321750ee36626
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378658
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It does not seem nessecary to include it, when this it used just once
in lvol disk creation.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I42ead55329f0ac7e55bb73702d071f118a5c7931
Reviewed-on: https://review.gerrithub.io/379678
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
To increase readability, union in spdk_lvol_store_req is now split
into four separate structures.
As well spdk_bdev from lvs_basic/spdk_lvs_req was removed as it was
not needed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I65c5155f3d15151a97cf8f8e425b26aa1966b677
Reviewed-on: https://review.gerrithub.io/379169
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ife45dc8e27d767b9f09b67e7fae3b94837a14491
Reviewed-on: https://review.gerrithub.io/379458
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Now that the bdev_io read and write branches of the union have been
unified, the virtio-scsi bdev I/O code can be simplified a little bit.
Change-Id: Iadbe55862770a1b0e7f854b724a70d94c704218e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/379696
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, we naively assumed that a completed
reset was the reset in progress, and would
unilaterally set reset_in_progres to false.
So change reset_in_progress to a bdev_io pointer
instead. If this is not NULL, a reset is not in
progress. Then when a reset completes, we only
set the reset_in_progress pointer to NULL if we
are completing the reset that is in progress.
We also were not aborting queued resets when
destroying a channel so that is fixed here too.
The added unit test covers both fixes above - it will
submit two resets on a different channels, then destroy
the second channel. This will abort the second reset
and check that the bdev still sees the first reset as in
progress.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61df677cfa272c589ca03cb81753f71b0807a182
Reviewed-on: https://review.gerrithub.io/378199
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Upper layers are not supposed to put an I/O channel if there
are still I/O outstanding. This should apply to resets as well.
To better detect this case, do not remove the reset from
the channel's queued_reset list until it is ready to be
submitted to the bdev module. This ensures:
1) We can detect if a channel is put with a reset outstanding.
2) We do not access freed memory, when the channel is destroyed
before the reset message can submit the reset I/O.
3) Abort the queued reset if a channel is destroyed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c03eee8b3642155c19c2996e25955baac22d406
Reviewed-on: https://review.gerrithub.io/378198
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This provides an alternate path for submitting
resets to a bdev module, in preparation for some
future patches where we will want to avoid
reset-specific checks in the main I/O submission
path.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I833c01cc33940771b4265f963cfb9de61c5f1faf
Reviewed-on: https://review.gerrithub.io/378670
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
We will use this typedef for some additional use
cases where are not specific to the need_buf
functionality.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8d18c7ac037ab4b0ba612f308b9ca38538d112b1
Reviewed-on: https://review.gerrithub.io/378197
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
io_device and their channels are created after _spdk_bs_alloc finishes.
Until they are, only free() is required on allocated bs structure.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie00126cdaa2bb5cd77cad2dec89d670734367b49
Reviewed-on: https://review.gerrithub.io/379675
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Defer writing RPC response until after the device has been hotremoved.
Change-Id: I052280b205415e4a2ffa1421653cc49b8e3b1445
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371119
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Devices can be added to a SCSI
vhost controller at any time now.
Change-Id: Ic5dd4b78465d3431479e0389b7ea902e1e25c337
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371281
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This simplifies eventq API greatly. Since vhost supports only a single
LUN per device, lun parameter in eventq isn't required for now.
Change-Id: I1c41a3f509aca96f2de8de6563a3cac5c4dd1b8b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371118
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since we are calling eventq_enqueue only from inside of the controller
reactor, such ring is not needed. Eventq events will now be sent
immediately. This simplifies the whole process greatly.
The abstract vhost event layer is being replaced with much simpler and
less error-prone vhost external spdk_event API.
This reverts commit 542b5415 [1] together with vhost scsi device
hot-attach feature. Hot-attach shall be reintroduced in upcoming
patches.
[1] 542b541588 ("vhost_scsi: implemented abstract vhost event layer")
Change-Id: I39a427332d573c4e0be548d1c8caf0cf2858f6a5
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371117
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Since all direct bdev_io types have the same layout,
there is no need to keep them differentiated.
Change-Id: If8bb85e43c9922c0ebfc39837e3a45006e508b56
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377686
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Added READ CAPACITY (10) support.
This is a work towards supporting both (10) and
(16)-bit SCSI commands.
If READ CAPACITY (10) returns 0xFFFFFFFF as max lba,
a READ CAPACITY (16) is sent.
As specified in SBC-3 5.10.2 READ CAPACITY (10):
```
If the number of logical blocks exceeds the maximum value that is able
to be specified in the RETURNED LOGICAL BLOCK ADDRESS field, the device
server shall set the RETURNED LOGICAL BLOCK ADDRESS field to FFFFFFFFh.
The application client should then issue a READ CAPACITY (16) command
(see 3.27) to retrieve the READ CAPACITY (16) parameter data.
```
Change-Id: If82bc45e904e91d95b124724e895350098337ae9
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377091
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Added separate function for allocating virtio_scsi_disk.
This is required for the upcoming 10-bit SCSI command
support changes.
Change-Id: Ib60bfe003f37d796387944b04494baf2a77a6558
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/379422
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch also sets virtio_dev->modern for vhost-user
devices.
A word of explanation of what's happening now:
For virtio_pci, dev->modern is set when reading config,
as legacy devices have no Virtio PCI Capability in their
capability list. For virtio_user, the dev->modern should
be set if VIRTIO_F_VERSION_1 feature has been negotiated.
Change-Id: I056b1dcf65a5a6a87cda6499771399befdc59cb5
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377090
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Moved negotiation to virtio_init_device.
This patch also cleans up feature negotiation a bit.
Change-Id: Ia67e8d694a5acebcbe37679a657d68d6c46979db
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377089
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9e550a879b50af0de476583f5efd4e0518667662
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/379213
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK already uses DEFAULT_IO_QUEUE_SIZE and MQES to decide the correct
queue depth of NVMe queue pair, hardcoded it to NVME_IO_ENTRIES(512)
does not make sense if users want to set queue depth bigger than 512.
Change-Id: Iaa73fc79e055292ae9bd19af0c8c12f257ae5c46
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/379052
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use SGL with contiguous physical buffer metadata as the default PSDT
if NVMe can support SGL.
Change-Id: I99192a8b5408f1b034d5112d77d13639b7558f01
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/378699
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
A channel may have been deleted between when a message was sent to
a thread and when it gets executed on that thread. So we must look
for the channel when the messages gets executed - if it's not found,
just continue to the next thread(s).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib7e596f11f287c6be521ba729d33378f0a825c7e
Reviewed-on: https://review.gerrithub.io/378002
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This restriction causes bdevs examination/discovery to fail
when there are asynchronous operations. We should remove this
limitation for now. Future plan is to implement approach
similar to the one that is present in kernel.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: Ibe5572297672022412d25a4a835dc9527ce97f3e
Reviewed-on: https://review.gerrithub.io/378758
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Script for testing vhost using lvols as backends for
virtual machines. Option for using nested lvol stores and
nested lvol bdevs also provided.
Change-Id: Iad8a196c97f292881a8b424b4433ec281f12aec6
Signed-off-by: Lukasz <lukaszx.galka@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/365798
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
FFFFFFFFh is reserved for the broadcast NSID and can't be used as a
NSID for a specific namespace.
Change-Id: I64a3cc80993d7b34324823462f4d992d1415773f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378849
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will be used to simulate multi-threading for
bdev unit tests.
While here, alphabetize the existing calls - calloc
had been inserted out of order in a couple of places.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I559cd1fd79e78f03ebdac313e0bbedbcdde4a8c1
Reviewed-on: https://review.gerrithub.io/377968
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is the final set of command processing functions (admin and I/O
commands were already handled in ctrlr.c), and it allows us to clean up
the ctrlr.c API some more.
Change-Id: Ic73c56c44d7fd64bfaa72b6f5f6f0984b4dfa053
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378018
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Combine nvmf_process_connect() into spdk_nvmf_ctrlr_connect() to
simplify the logic and keep it all together in one function.
This also allows us to move the invalid connect helper function and
macros back out of the header into a static function in one file.
Change-Id: Ia3bd80d0309392520d51bf8f5830d3f23332c5e3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378016
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
These are not used in the current code.
We introduced the concept of a subsystem ID to prepare for a future
scaling strategy, but the poll group scaling strategy turns out to
not need subsystem IDs.
Change-Id: Ibd27cc0d446c7cda34db76787e1e9c233c399f44
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/378015
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This moves the subsystem->ctrlrs list management fully into the
subsystem code, which will help simplify thread safety considerations
once we start adding locks.
Change-Id: Ibc118923f1bd520f1e524cde5d45ccfcc69aee1e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376025
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Previously we made cntlid globally unique as part of
a strategy for scaling connections that never panned
out. Now, we have a new strategy and don't need cntlid
to be globally unique, so relax the restrictions
and simplify the code.
Change-Id: I167772f5e7d37183715bf9967b0102529144bb2b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/376250
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
The NVMe-oF 1.0 spec says:
"The NVM subsystem shall not allocate a Controller ID in the range FFF0h
to FFFFh as a valid Controller ID"
Change-Id: If0b7dc4948e40b3bdf370a1da97199a25d362e71
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/376247
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Avoid having to look up transports during discovery later.
Change-Id: I0207a822f05b02de4798d3e966603c073ea14062
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/377991
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch shows UUID and base bdev for logical volume stores
when get_lvol_stores() RPC is called.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idbd0bc6c4a0334e5af8d4a674a203ddb2270f3e4
Reviewed-on: https://review.gerrithub.io/374604
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch add support crc for metadata pages, we will also
add crc for supper block, used md and used clusters bitmask
pages in the following patches.
Change-Id: Ie36fcc16b39296d06721f1f8eb5689260194c558
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/377901
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Mark the file as deleted in the function spdk_fs_delete_file()
when the referance is not 0, and delete the file when it is closed,
make the behaviour as "unlink".
Change-Id: Ia934bb73c82c48fdbab79dbe4b56296a73abc01e
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/374944
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Previously virtio_hw was managing both VirtIO PCI and
vhost-user devices. Now's there virtio_dev, a common
part for both backends. virtio_hw is only used for PCI.
Note that this patch does not introduce another
abstraction layer. It only unifies an already existing
one. Previously virtio_user_dev was built on top of
virtio_hw, with most PCI fields just hanging there
unused. Now both, virtio_user_dev and virtio_hw are
built on top of virtio_dev.
Change-Id: Ida25defc0063055a81cf4039c9b85470b9880bc3
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376966
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch removes unnecessary if (hw->virtio_user_dev)
conditions. It also makes vq_ring_mem explicitly
a physical address. There's already a separate
vq_ring_virt_mem field that's used for vhost-user.
Change-Id: Ie8d97458744b4e3ae9d0e3d72b28d29f19179706
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376965
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
All rte_virtio filenames have virtio_ prefix now.
Change-Id: I42018624606d68997a0e982e7b622d6a23e3c190
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/376624
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Used vhost external event API to call RPC commands on
controller's reactor. RPC call get_vhost_scsi_controllers
has been left unchanged as it requires special *foreach*
external event API. See next patches for details.
Change-Id: I1fd77c9af2606bbcea45cd0089015dd890b6e328
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371279
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Controller creation RPC can't be done on controller's reactor
(as there's obviously no controller yet...), so a special
set of vhost_mutex_lock/unlock() functions to has been added
to synchronise controller creation with the rest of
ctrlr-enumerating code.
Change-Id: Ib6e4b894a85ff1f70ebd047832c5a3568a00f1a7
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377651
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Continuation of patch 94afad5a [1].
That function could be called from outside of the vhost reactor,
causing data races and possible segfaults.
Now, after this patch, all ctrlr-changing functions take spdk_vhost_dev
parameter, meaning they should be called via external event API [1],
which soon will be the only way of obtaining spdk_vhost_dev pointer.
[1] 94afad5a ("vhost: added external API to call spdk_events on vdev reactor")
Change-Id: I40ea66ad09fb5c433dd897a4e22aedeb423f9b4b
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/371013
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Added spdk_vhost_dev_backend_event_done function
that sets the return code for the callback and
transparently calls sem_post.
Change-Id: Iba27af780cd1753056c1607177c945e13c95c712
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/377585
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Ia96ae78ff9530d953181ac5f7255a38f3c8ec430
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Reviewed-on: https://review.gerrithub.io/375392
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
