Currently there are no timeout mechanism for Admin commands
when initialization, the NVMe driver may enter infinite loop.
While here, add a new parameter to the controller initialization
options, NVMe controller will report an error when timeout
happens during initialization.
Change-Id: Id0c6b6fa15abe5227b486bee95c8e02914b0d358
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The max_send_sge and max_recv_sge values can be set to any value from
0...dev_attr->max_sge. WHen we actually set the attributes, we will
receive a qpair with values for max_sge greater than or equal to what we
initially set. We need to store the maximum number of SGEs for later use
when constructing work requests.
Previously we have not relied on these values since we assumed that we
would always be able to have more sges than we asked for initially. This
may change as we try to allocate more SGEs to handle splitting buffers
across memory regions.
Change-Id: Ibbeae1908b86baa3a96d9c6cd2051401aaa2197b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/433307
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We have historically conflated SPDK_NVMF_MAX_SGL_ENTRIES and the maximum
number of SGEs associated with a wr data object. For now these are the
same thing, but there should be nothing tying the number of NVMe request
SGL elements to the number of rdma request wr sgl elements.
Also, clarify the rx_sge and tx_sge enums to reflect the actual maximum
number of SGEs associated with either the send and receive queues.
This change doesn't actually modify these values, but sets us up to do
things like split the data in an NVMe SGE into multiple WR SGEs in case
the buffer associated with the NVMe SGE is not contained in a single
RDMA mr.
We also need to store these values in the qpair for later usage.
Change-Id: Iff3756fc72787a4b72a99b2bdf90bf486a8010fa
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/433196
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
blob and blob_bdev are already included via the lvol bdev module
dependencies in mk/spdk.modules.mk. This patch adds blobfs there
too.
These changes are needed for some upcoming patches which will
apply --whole-archive to all libraries linked into the application.
That patch will require that we never include the same library
twice.
Shared library builds *require* that blobfs be listed before
blob on the link line, hence adding blobfs here even though it's
not technically associated with a bdev module.
We can also simplify spdk.modules.mk while we're here - just
filter out bdev_lvol to disable lvol for applications like
blob_cli that need to disable it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I01e5e6b91d947463749f942f54c12f48229bbe5a
Reviewed-on: https://review.gerrithub.io/432916
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Same sequence used in recent crypto module fixes.
Change-Id: Ic5f714e91cf871bce35b0e8fe3e32ae42157e6de
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/433383
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Move the message ring and the polling into the thread
itself.
Change-Id: I5bc53c68bb1314fd69ed80cc98c5b86ce8be880f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423768
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Picked up from recent update to the passthru module.
Change-Id: Ie7404e5aadda6691b15020adbbc1e1f4c23d0a12
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/433384
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All io_devices now have an associated name - so add
that name to relevant error messages to help with
debugging.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8ef678681fc29daed08e2f95b3096c5dce429ab9
Reviewed-on: https://review.gerrithub.io/433203
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Having the buffers be the same size as the maximum xfer size doesn't do
us any favors. Make these buffers a ratio of the maximum transfer size
and the number of supported nvmf SGLs.
Also configure the number of nvmf request iovs to correspond with this
new ratio.
Change-Id: I3147dcd86b599c74521ebfdf3bcdbcdee8871a3a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/428747
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
According to the currrent logic, it should be explictly defined
in the configuration file if the NVMe-oF target is started by
configuration file without using rpc calls. If no transport is
defined, we do not need to parse the following subsystems
but should terminate the NVMe-oF target .
Change-Id: I2e2db8406a30a9bf7e54d38f8d08a8d92ef158c9
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/432376
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In vbdev_crypto_examine() we were failing to unregsiter the io_device
in the event that spdk_vbdev_register() call failed. Found via
inspection.
Change-Id: I73c6c0c5693777b93c1ea02dcf2e2e65d46fe27d
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/432933
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In create_crypto_disk() we were failing to unregsiter the io_device
in the event that spdk_vbdev_register() call failed. Found via
inspection looking into a CI failure however this potentially could
have caused that failure as well (I don't think so though, there
were no prints in the log that it followed this path).
Change-Id: I7085c4e25665a5a15def38d6726d519731b7e44e
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/432932
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Found via inspection while invetigating a CI failure. In
vbdev_crypto_examine() we were not looking at the rc from
vbdev_crypto_claim()
Change-Id: I8be09b5844e18e35b95f19e378fe280323d183fa
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/432930
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The io device was previously not being unregistered, this looks
like the root cause to several recent CI failures in the bdev
JSON tests that use RPC to create/save/clear/load configs.
Change-Id: Ia77ed9fe230c79188d8d862e98b17581ae81b31f
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/433194
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
All io_devices should be unregistered before the
application exits. If not, print an error message
for each io_device that still exists.
Eventually we may want to assert() if any io_devices
are found, but for now we'll just stick with the
error message.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If017edf40fc2904ed772bc1c6124f06fc9b49bcd
Reviewed-on: https://review.gerrithub.io/433202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Eventually we may want to assert if any channels still
exist when the thread is freed, but for now we'll just
stick with the error message.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I909a409f34c7783a32d3300942897f591c90fca1
Reviewed-on: https://review.gerrithub.io/433201
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The user of the thread library is now only responsible for
periodically calling spdk_thread_poll. Pollers are handled
internally.
In order to avoid changing all of the unit tests, the ability
to provide function pointers to change the behavior of
the poller registration is still in the code. This should
only be used from tests until they are all converted.
Change-Id: Ie2c00ce1d57ca3710ed2c469cd711924768e23ef
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/417784
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously we used VFIO if only the vfio-pci kernel module
was loaded, which is different from what our setup.sh script
did. On a fairly usual system configuration, setup.sh could
have bound devices to UIO, but SPDK would still try to map
memory to an (empty) DPDK VFIO container just because its fd
was available. That would fail obviously.
setup.sh checks for IOMMU presence in order to use vfio-pci
and SPDK should probably do the same. We could check the
kernel driver of each attached PCI device, but there's no
chance right now of supporting both UIO and VFIO devices
at the same time with IOMMU passthrough. That's not
a reasonable configuration anyway. To keep things simple,
we just add a single check on vtophys initialization.
Fixes#462
Change-Id: Ica653f117743be322291a1b7e37ed00e34ef5035
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/432518
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <wuzhouhui@kingsoft.com>
Write pm filepath first to offset 4K. Then write
the super block to offset 0. This ensures the backing
device isn't really valid until both are written
(avoiding the case where the super block got written
but not the path.)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I55508aa67b4179e658827c982cd955d009a3f321
Reviewed-on: https://review.gerrithub.io/432505
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <spdk-ci.pdl@broadcom.com>
While here, add basic implementations for these function ptrs
in the unit tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I54e18a3b331777602fed29382b95b449005efcce
Reviewed-on: https://review.gerrithub.io/432503
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I621a8a3891c8f3829564940219c70c6520c6f9c7
Reviewed-on: https://review.gerrithub.io/427899
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Printing messages every time an iSCSI connection logs in or
logs out/terminates is too noisy. Make these DEBUGLOGs
instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifc1014e4f8dce414a1c4ef75ea6b6749954083cc
Reviewed-on: https://review.gerrithub.io/432606
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The bdev layer will sort of check this when we try to
register the bdev, but it's better to catch this much
earlier. That way we catch it when the name gets inserted
into the list, rather than when the base bdev appears.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I846cb138fa848078d2c76356273870c607d79548
Reviewed-on: https://review.gerrithub.io/432602
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This ensures any errors get properly propagated back to the
RPC handler.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia352b3bd7d8912e7095e9d3e6b2e80e3dccbeb42
Reviewed-on: https://review.gerrithub.io/432601
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The RDMA memory map needs to be per-protection
domain, not per NVMe controller. Otherwise, when
an NVMe controller is removed, the memory map may
reference an invalid pointer to a detached
controller.
Change-Id: I0c5bd2172daee0c70efb40eab784839e0cde8bc4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/432590
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Apparently this patch revealed an issue somewhere in SGL
handling in NVMf initiator which is causing our CI to fail.
Let's revert it while we work on a proper fix.
This reverts commit 6f5840d2259a38a95be5fb63b19e335a08e0db70.
This is not a full revert, some app.c changes to the usage text
were kept unchanged.
Change-Id: Iddea5c2b9df50bd12ef8f6226165883f6622ab33
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/432576
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: Ben Walker <benjamin.walker@intel.com>
In some special cases, NVMe device with cdata.nn=0
may be used to do validation or other test work.
cdata.nn=0 means the device can't support NS at all.
Change-Id: I55f75a8cb21b8d1b99c5318e27c876a4371d6dd4
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/432191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: joevannip <jparairo@nvxltech.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
BSD implementation for config access in DPDK seems to
return 0 on success while Linux implementation returns 0
only on failure. The env wrapper was always treating 0 as
an error and caused some of our PCI initialization code
to fail prematurely.
At one point DPDK harmonized this BSD behavior with Linux,
but only for config reads.
Fixes#484
Change-Id: I4ea850ea50f5e667fad28e8125209b21c377a2a3
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/432401
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now, that _spdk_bdev_io_get_buf offers allocating aligned buffers,
add possibility to store original buffer and replace it by aligned
one for the time of IO.
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: If0ed306175631613c0f9310dccaae6615364fb49
Reviewed-on: https://review.gerrithub.io/429754
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Allow specifying a custom hugetlbfs directory.
This can be useful e.g. when trying to use hugepages
with fixed size, different size limit, or different
access permissions.
Change-Id: I418cbab99ed183383300b3c3d9945095a03478db
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/432105
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This option is deprecated. Also, rename the rpc and configuration
options for setting the opts to reflect that they now only set the max
number of subsystems
Change-Id: Iaabcbf33dd0a0dc489d81233fda74e9e7f3e0d2e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430161
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In the usage output, the default config could be printed
as "(null)" and mem_size as "-1MB".
Change-Id: Ib6adc1ab86c43a40096d392bdfc64d3d508a86bc
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/432422
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that we utilize DPDK dynamic memory allocation, we
no longer need to set the default pre-reserved memory size.
It'll now be 0, which implies all memory will be allocated
at runtime.
The option to pre-reserve all hugepages on the system is
now only available on BSD, so also clarify that bit in the
app usage text.
Change-Id: I5a8a1d9bf14ad6d938532d7e6254a45e4a81bb92
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/432204
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch implements the following QP shutdown flow:
1. Move the QP to ERR state
2. Post dummy work requests to send and receive queues
3. Poll CQ until it returns dummy work requests (with WR Flush Error status)
4. Call ibv_destroy_qp and release resources
In order to differentiate dummy and normal WRs new spdk_nvmf_rdma_wr
structure was introduced which contains type of WR. Since now it is
expected that wr_id field in ibv_recv/send_wr and ibv_wc always points
to this structure. Based on WR type wr_id can be safely casted to
correct container structure. In case of unsuccessful work completions
'opcode' can not be used for this purpose because it may be
invalid (see "IB Architecture Specification Volume 1", ch. 11.4.2.1
"Poll for completion").
Change-Id: Ifb791e36114c619c71ad4d831f2c7972fe7cf13d
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-on: https://review.gerrithub.io/430754
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Add the following to struct spdk_reduce_pm_file:
* path of the pm file
* pointer to the mmapped pm region
* whether the mmaped address is pmem or not
Now use pmem_persist or pmem_msync to persist volume
parameters. Note that we do *not* persist the pm filename
to the pm file - the pm filename will be written to the
backing disk in a later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1d873ae086dc20600798a49b98e1bf490ac750f3
Reviewed-on: https://review.gerrithub.io/430648
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
--with-reduce required to build reduce. This depends on
libpmem being installed.
We still need to work out details in pkgdep.sh and
vm_setup.sh. Some distributions like Ubuntu still
require configuring extra package repositories to
get libpmem packages.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4e056ce1da9a1fecb4458f8f5e7ff5d61c422533
Reviewed-on: https://review.gerrithub.io/430646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A compressed volume will require both a persistent
memory region/file for per-chunk metadata and a
backing device to store the compressed blocks.
Add functions here to calculate the sizes of these
based on the desired size of the compressed volume,
its chunk size and the size of each backing block.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9203479e2a268c3ab0e2b0e06e348285e9d1cd13
Reviewed-on: https://review.gerrithub.io/430387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
reduce will be a block compression algorithm designed
specifically for SPDK. It is called "reduce" because
it reduces the data size on disk.
This patch just adds the shell of a library, include
files and unit tests. This will be fleshed out in
the rest of the patches in this series.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I88e238af64142a7c0e50ab7b447280026b55581f
Reviewed-on: https://review.gerrithub.io/430386
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
NVMe controller won't be removed if it has no namespace
or no bdev is succesfully created out.
Change-Id: I45b7e364a0cb35c902af5e745237931b67335145
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/431701
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As a step toward non-blocking JSON RPC client change the the way we
retrive the response.
Now we retrive full response by calling
spdk_jsonrpc_client_recv_response(). If response is ready it will be
parsed to spdk_jsonrpc_client_response object then user can issue
spdk_jsonrpc_client_get_response() to get the response object. When
processing response object is done the user calls
spdk_jsonrpc_client_free_response() to free it.
This logic will simplify both non-blocking mode and multiple response
handling.
Change-Id: I737d8a34283f4a68795d6bc6ba0c8646b7ae3319
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/429262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
And change names of parms to be consistent with others used in
RPC testing.
Change-Id: I8331c6a22866d89a2a4ffb5fc8d41d74b4b7b07d
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/428724
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
