When last clone of a snapshot is being deleted
we remove that snapshot from snapshots list.
We should not do that as it still works as a
snapshot and it is read-only, but it does not list
as a snpashot from get_bdevs. Instead remove snapshot
entry from the list when blob that represents that
snapshot is being removed.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I8d76229567fb0d9f15d29bad3fd94b9813249604
Reviewed-on: https://review.gerrithub.io/436971
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The ctrlr may be NULL, so we need to add a check here
to present segment fault.
Change-Id: I6c5361cc829af065082a95df0b8cc2f8d49a6002
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/436950
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This more closely matches the sequence of events
a user will take in creating a compressed volume.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2311aed49e2a623feb9c5fbdbd25fb3201aeeeb5
Reviewed-on: https://review.gerrithub.io/436065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was the result of a previous merge conflict.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic657e7f9e16b6a073669b078b4323f7abfef95b9
Reviewed-on: https://review.gerrithub.io/436063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Based on feedback from Paul Luse in some earlier reviews.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1930a3de05ada15d3ac4530c081c2f951b96fe97
Reviewed-on: https://review.gerrithub.io/435368
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For write operations, copy data to req->buf and write
to disk.
If chunk already specified in logical map, read the
chunk first into req->buf, and overwrite with data
specified by the write operation.
If chunk not specified in logical map, fill logical
blocks not specified by the write operation with
zeroes.
For read operations, read chunk into req->buf first,
then copy relevant data into the buffers specified
by the read operations.
These operations are all functional, but have room
for future improvement. For example, this patch
will issue a separate backing read/write operations
for each backing block in the chunk - this could be
optimized to coalesce operations where the backing
blocks are contiguous.
While here, clean up freeing bufspace in one of
the error paths - this needs to be freed using
spdk_dma_free instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6dbf4fc9a8fdf0f5424b1f1f9178c79891c96d0d
Reviewed-on: https://review.gerrithub.io/434116
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Focus of this patch is adding the foundations of manipulating
the chunk_map and backing_block bit arrays and persisting
chunk maps and the logical map to the pm_file.
No data is writting the backing device yet. That will come
in later patches. This also does not rebuild the bit arrays
from the pm_file during spdk_reduce_vol_load - that will also come
in a later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib5336dbe907c253e545704471de8c4e812bbc157
Reviewed-on: https://review.gerrithub.io/434115
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
ziperrno was left over from earlier versions of this
patch set that used "sbzip" instead of "reduce".
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4159141b92727bb0a24db5f9aefcccaadc360d9e
Reviewed-on: https://review.gerrithub.io/436399
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Since we lock g_lvol_stores_mutex when add lvs to g_lvol_stores, so
logically speaking, we shoud lock g_lvol_stores_mutex whenever access
g_lvol_stores_mutex. Although I can't figure out specific scenario that
will cause contention if we don't lock it.
Change-Id: If3bdba91407f5c9d09fc16c5ec7dcb919ff9647d
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/426147
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For TCP/IP transport, we need to remove the socket
from the polling group since we do not want to keep the
tgroup info in the NVMe/TCP qpair, it should be general.
Change-Id: I4b064d8378f66ea5d91ac554fe628d9ccebd07f4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/434128
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since we already make the recv state handling in a correct
way, so we do not need this check any more.
Change-Id: Id71ab2e0ef60be302f8cf6ea776259d7312663ec
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/436896
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the adminq is not created, we should call
nvme_transport_ctrlr_destruct (i.e., nvme_tcp_ctrlr_destruct
in tcp transport).
Change-Id: If2362c47ac89fd80289ddd8402cf9f74d7bb5801
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/436613
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Much of this was originally applied by Darek in
6f5840d22 but then had to be reverted due to NVMe-oF
MR issues in a817ccf5. Now that the NVMe-oF MR issues
have been resolved, we can reapply these changes.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: I58d603523901c78dbc81279078a09b2a24c091e6
Reviewed-on: https://review.gerrithub.io/436547
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The nvme/identify cmd issued some cmds to a ctrlr irrespective
of its type, and when the target was a Discovery ctrlr which only
accepts a very limited cmd set, that would result in errors observable
both on the initiator side (from nvme/identify) and in the output on
the target (nvmf_tgt). Introduce new API, spdk_nvme_ctrlr_is_discovery(),
and alter identify to make use of that in determining which commands
to send to the target.
Change-Id: I974a569843f1d2b9e1ece7bd3bf9ceee1bfae872
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/436225
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
For split SCSI read command, if there is any failure in the sequence of
it, the first error must be propagated to all subtasks of it.
For split SCSI write command, if there is any failure in the sequence
of it, the first error must be propagated to the primary subtask.
Before this patch,
for read task:
- any failure is propagated to already completed subtasks, but
is not propagated to any subtasks not completed yet, and
- if any failure occurs in non-primary subtasks, it is not propagated
to the primary subtask.
for write task:
- if the primary subtask completes after any failure of non-primary
subtasks, the failure will be overwritten by the success of the
primary task.
This patch fixes these issues.
Change-Id: I2d878798cbb40a8c5bd6a6fe5efb32b8de4a8ecd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436673
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The possible cause of failure in spdk_iscsi_reject() is only -ENOMEM,
and SPDK_SUCCESS is 0 and SPDK_ISCSI_CONNECTION_FATAL is -1.
Hence just calling spdk_iscsi_reject() as return value will be
enough.
Besides, one redundant return path was found and fixed in this
patch too.
Change-Id: I37647a9ef6d0173d68d1017443d5a1d5604c1e64
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436644
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Current implementation is a little complicated and a little
refactoring will improve maintainability.
Change-Id: I23bdbe6a0e14739631c4b4f211bedefc9742f410
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436447
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following change will make iSCSI connection management easier to read.
Before:
- _spdk_iscsi_conn_free(conn) is called by _spdk_iscsi_conn_check_shutdown(conn)
or _spdk_iscsi_conn_destruct(conn).
- spdk_iscsi_conn_remove_conn(conn) is called by _spdk_iscsi_conn_free(conn).
- spdk_iscsi_conn_free(conn) is called by spdk_iscsi_remove_conn(conn).
After
- spdk_iscsi_conn_free(conn) is called by _spdk_iscsi_conn_check_shutdown(conn)
or _spdk_iscsi_conn_destruct(conn).
- _spdk_iscsi_conn_free(conn) is called by spdk_iscsi_conn_free(conn).
This refinement is done by the following:
- Call _func() by func(). func() is parent of _func().
- Inline spdk_iscsi_conn_remove_conn(conn) into _spdk_iscsi_conn_free(conn).
Change-Id: Ia510df1f2921224fcfc51dad7bb85a1ac6197698
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436230
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Moving error path to the end of the function will be easier to read.
Change-Id: I35bfd9b12d83ccb6fffe159b68dd08c87f6de0fb
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436229
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Some poller's return code don't match comments or are always -1.
We will be able to add more meaningful return code and contribute
to improve SPDK statistics.
Change-Id: Ia3eda31a32a3a76bc75c9860cc32cb86ce588904
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This direct call of LUN reset has caused unexpected behavior
during heavy stress test.
Apply correct LUN reset handling for this case too.
Even if there are multiple LUNs, LUN resets are serialized in
the SCSI layer by previous patches and parallel calls of LUN resets
will not cause any issue.
Change-Id: I920e2864ef0fb41c6bd2b6153ef3caff6876e893
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436115
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is a failsafe for finding and reporting data buffers that span
multiple Memory Regions. These errors should never be triggered, but
finding and reporting them will help any debugging.
Change-Id: I3c61e3cc510f5a36039fc1815ff0de45fce794d5
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/436054
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Discover commands previously blindly used the nvmf_req->data structure.
This only works if the entire command fits in a single contiguous
buffer. commit 1d9be84bfdf8 changed the default buffer size such that
this would become a problem for as few as 8 subsystems.
Fixes github issue 525
This change may also help prevent data corruption as we were copying up
to nvmf_req->length data into the buffer. For requests with multiple
data buffers this can cause us to copy off the end of that buffer.
Change-Id: I788259da988b2458f57ee2795e1c5d3ced8803dd
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/435544
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8583bf9448e44e112dee5083899bd47f7e4e8523
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/435774
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is for ABORT TASK SET and LUN RESET.
iSCSI layer doesn't have pending queue and hence if the target task
is read task and is queued in queued_datain_tasks, it must be
aborted before submitting ABORT TASK to SCSI layer.
Aborting the target task may not complete by an iteration because
submitted read tasks are limited. Hence use poller to complete abortion
by repetition.
Change-Id: Idabf4931d751ee698e9809eafd5c151b979f048b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By up to the previous patch in the patch series, unexpected behavior
due to write tasks in task management commands have been fixed.
But unexpected behavior due to read tasks in task management commands
have been still observed.
Remaining patches in the patch series will fix the unexpected behavior
due to read tasks in task management commands.
This patch is for ABORT TASK.
ABORT TASK is not supported in SCSI layer yet. But the initiator
doesn't care about the failure is due to not-supported or failure.
It must be avoided that the task management command returns SCSI Good
but some tasks are not aborted and return SCSI Good later. On the other
hand, it is acceptable that the task management command returns
failure but some tasks are partially aborted.
Hence this patch adds operation without checking the support status
in SCSI layer.
iSCSI layer doesn't have pending queue and hence if the target task
is read task and is queued in queued_datain_tasks, it must be
aborted before submitting ABORT TASK to SCSI layer.
Aborting the target task may not complete by an iteration because
submitted read tasks are limited. Hence use poller to complete abortion
by repetition.
Change-Id: I030a8b2f19c2f7c7d2f7b0b2c633579534db631b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By subsequent patches for iSCSI, spdk_scsi_dev_queue_mgmt_task()
will not be called directly from the function that knows TMF code,
and currently setting TMF code to SCSI task is done in
spdk_scsi_dev_queue_mgmt_task().
Hence after subsequent patches for iSCSI, to hand off TMF code to
SCSI task, any dynamic context will be required.
To avoid the dynamic context, extract setting TMF code from
spdk_scsi_dev_queue_mgmt_task() and put appropriate place for
each call of spdk_scsi_dev_queue_mgmt_task().
Additionally, in spdk_abort_transfer_task_in_task_mgmt_resp(),
ref_task_tag is got from PDU but getting it from SCSI task is
much easier. Hence get ref_task_tag from SCSI task in the callback.
Change-Id: I7add9290598d2df7cfcf1506ec75d74c70c0f236
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Subsequent patches will have to abort SCSI tasks in the iSCSI
layer. But spdk_scsi_task_set_status() API is not public API.
spdk_scsi_task_process_null_lun() is existing public API but
LUN NOT SUPPORTED is not appropriate for those cases.
Hence add an new public API spdk_scsi_task_process_abort().
Change-Id: I5b488e902ccd790ace2936b3e6ebfeb124fa429a
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436080
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next patch will add scsi_task_process_abort to task.c for
proper task management functions. scsi_task_process_null_lun
doesn't use struct spdk_scsi_lun and having both in the same
file will improve maintainability.
Change-Id: I6fd91aad84e62d14ecb7b44794db391a82cb4b12
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
IO submissions to backends have to complete first in LUN reset.
Previous patch makes the waiting time limited.
LUN reset don't use timeout for now because even if LUN reset reports
timeout, error handling of the initiator will be escalated and the
initiator will issue stronger command and will wait eventually
until all outstanding tasks completed.
Besides, not using timeout in LUN reset will make implementation simple.
If timeout becomes necessary, I'll do it in the separate patch later.
Change-Id: Ie9e4502068c19b1727ea65dc773ddf08cedec7c4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Submission queue deleted by https://review.gerrithub.io/393911
is necessary to support proper LUN reset.
Hence revert the removal in this patch.
And using the submission queue, suspend IO task submission during
LUN reset to limit completion time of LUN reset.
Change-Id: I3cdc4f0165fe845637112c2900407d6b4a09df79
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434765
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Task management functions don't require performance. Serializing
execution of task managment functions will sipmlify and stabilize
the logic and will be helpful for upcoming patches to support
other task management functions.
This patch introduces two queues, pending and submitted queue,
and serializes LUN reset exection and makes LUN hot removal
wait for LUN reset.
Besides, checking if LUN is NULL is moved to the upper layer as
same as IO task submission.
Change-Id: Ia0cf3f437a745ee70fc9b17744cc63c833690dda
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434764
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The purpose of this patch is to fix the issue when there is no
data buffer allocated, the previous method is wrong to set the
recv pdu state.
The reason is that:
1 When there is no data buffer allocated, we still need to handle
the incoming pdu. It means that we should switch the pdu recv
state immedidately.
2 And when there is a buffer, we resume the req handling with the
allocated buffer, that time we should not switch the pdu receving
state of the tqpair.
Change-Id: I1cc2723acc7b0a17407c3a2e6273313a4e612916
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/436153
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The usage of this list is duplicated with
the state_queue[TCP_REQUEST_STATE_DATA_PENDING_FOR_R2T]
list of tqpair, so remove it.
Change-Id: I7a67a5c8049bb9492bf97e0d60e2040a29b0a7e4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/436274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
We could call spdk_jsonrpc_end_result with a NULL
result parameter, which will hit an assert.
While here, also remove the "no memory" error message
if the result object can't be obtained. Getting no result
is not necessarily caused by memory allocation failure
and everywhere throughout the SPDK we don't print any
message if that happens.
Change-Id: I4618b211192aa1c1d47fd850d17497d3ff9888ea
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/435112
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Having unlimited size core dumps is not a good idea on a lot of
machines. Modify it to 5GB.
Change-Id: I1d52bfa9f2450e2d8f824c3b86aa2ad5fe4579c3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/436412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Change-Id: Ia65e235a85207c128ba274e1bab38d6c35344239
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/435563
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Fix the issue in both target and host sides.
Change-Id: I1bf31072b2164a3035b443fe6c5418a6a7829d81
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/436099
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Previously, this field is used to optimize the code.
When we receive the capsule cmd pdu, we need to allocate
the related buffer, if there is read or write request.
If the related buffer is not valid, then we cannot enter
the next pdu handling phase. So we use this field to mark.
After carefully checking the code, I think that we use
the tcp_req which is assoicated with the pdu, thus it is
efficient.
Change-Id: Ic1634d706dd40a706269bce199bf6031ea0462c0
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/435995
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
As a part of cleanup they're replaced by a device-agnostic
attach API, which is easier for us to manage.
Change-Id: I2ec68f20ba209f02ee5c2de4b6fe5330a4bc0853
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/436480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As a part of cleanup they're replaced by a device-agnostic
attach API, which is easier for us to manage.
Change-Id: Ia92bd8f4525712bd27ade16ead67435c5e0fbe7a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/436479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As a part of cleanup they're replaced by a device-agnostic
attach API, which is easier for us to manage.
Change-Id: I7558590e41e5c580a130a6aba7ae4f7dcff58da8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/436478
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch enables non blocking mode in RPC client. Requests are send
and received during spdk_jsonrpc_client_poll.
Change-Id: I5089737b2407055d3eeddb5e2ab0946d74e43c6a
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/430095
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Current SPDK SCSI supports only LUN RESET in task management function.
Upcoming patches will support other functions too but differentiate
the callback function about LUN reset from other task management
functions for now to avoid misunderstanding.
Change-Id: If8f00ce413fbcc54b12dd885cbf01597f83a2af9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434763
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to the next patch.
Change-Id: Ia7af66ba129a4666730f94be64d3699cded65e09
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434762
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As described in RFC3720, task management request will act on all
the commands from the same session having a CmdSN lower than the
task management CmdSN.
Current implementation clears all R2T tasks without checking CmdSN.
This patch changes the implementation to clear only R2T tasks
whose CmdSN is smaller than the task management request.
Additionally this patch adds to UT code to verify the change works
as expected.
Change-Id: I0b368cb13741bc05259924d27793438e9250b951
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
