Implement an async variant of spdk_nvme_ctrlr_reset(). This initial
implementation only allocates a context and returns it to the caller,
relying on the caller to poll the context to execute the existing
spdk_nvme_ctrlr_reset() implementation.
Wire up spdk_nvme_ctrlr_reset() to use this async variant to verify
that NVMe controller reset still works.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I75d4b75dbf5897db452ee65286aef5a4eb839fca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In rte_power all that enabling/disabling turbo does is allows
for additional entry in frequency array for particular core.
Instead of exposing this API through spdk governor,
just make sure that dpdk_governor enables turbo by default.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I994b326a57c01889bccea26635753c56637259d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8789
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Those calls went unused, in favor or much more useful
up/down/min/max variants.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I432896196a1a6edfc6799c8658df49567f73d457
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8788
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The spdk_governor_capabilities added lots of capabilities
which went unused, suposedly to mark which callbacks
a governor had implemented.
This made little sense, since capabilities are per core and
not implmenting this APIs made little sense.
With this patch spdk_governor_capabilities is brought in
line with rte_power_core_capabilities.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I85296fce2999cb41957162b63ee13d86a0be919f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8787
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove _spdk_scheduler_disable() to avoid confusion as there is
no spdk_scheduler_enable function. Since spdk_scheduler_disable
sets scheduler period to 0, use spdk_scheduler_period_set(0) instead.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4f1390a635f80e8b92775aa4be2e37f5b95467f8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7448
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
There is only one g_scheduling_reactor (main core), the is_scheduling
flag for it is used to block starting new gather_metrics before
previous one is finished.
Meanwhile is_scheduling flag on other reactors was used to block
destroying lw_threads while scheduling happens. It was only needed
because scheduler interacted with the same lw_thread pointers as
each reactor. Previous patch removed this dependency, instead
spdk_thread ids is used. If an spdk_thread is destroyed,
while scheduling _threads_reschedule_thread() handles it.
It is no longer required to block destruction of lw_threads
based on this flag.
Instead of using the main core reactor flag, a g_scheduling_in_progress
is introduced.
Removed _spdk_get_scheduling_reactor() and instead shared the value
of g_scheduling_in_progress between reactor.c and app.c.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica57326a552477add522174cc3e96b3bab918350
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8732
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Removing dependency on schedulers to directly modify
lw_thread field structures will help making schedulers
truly plugable.
Instead of using lw_thread, new structure is created
that holds copy of stats and refer to the thread by
spdk_thread id.
As an added benefit of not changing lw_thread directly,
we won't run into issue of balancing function changing it
while other reactor removes and frees it.
In the future an API will be added for scheduler to call
in order to move the thread directly. Rather than for
event framework to rely on modified core_info/thread_info
structure.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8f85bb8dc080fd13b78b07ee9ef8e8be7051659b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8411
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We've always used `dst` as the destination for CRC result, with
the recent addition of a copy_CRC API `dst` was needed for the
copy destination and `crc_dst` was used for the CRC. This
patch just makes all the CRC functions use `crc_dst` to avoid
confusion. The accel_task struct also has a `crc_dst1 field,
that will be used consistently in the next patch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ia84c4a9e7940c6ebd31410c12272bd22b0c6dd29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8228
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Support in accel_perf is coming up in a later patch.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I63a1d3b9b1a3254fdca78e27c473b9b3468c93c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
We find a few files to get the size of a member of a struct. How to
do it is a little complex. So add a macro to do it will be helpful
to read the current code and develop new features.
lib/dif had used member_size() internally but Linux use sizeof_member()
as the macro. Besides, SPDK have used upper case letters for similar
macros, SPDK_CONTAINEROF() and SPDK_COUNTOF(). Hence spdk_member_size()
may be good but propose SPDK_SIZEOF_MEMBER() as the macro.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2179c845a3b75fb71aa039075cc4dfd30617b898
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8738
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
NVMe bdev module manages ANA log page itself now. So NVMe driver
should disable managing ANA log page.
Add a new option disable_read_ana_log_page to struct spdk_nvme_ctrlr_opts.
Then NVMe bdev module enables it when calling spdk_nvme_connect_async().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id5249efe90a4d50763c3a7eaa1eb9572f60fbc8c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8313
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
This patch is used to add the support for users to configure
use kernel or userspace idxd library.
Change-Id: Ie159b897bc9595894ad8f333168efaea6c2a3d78
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7332
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Nvmf/vfio-user uses this API to map NVMe command sent from
VM from Guest Physical Address to Host Virtual Address, so
now we moved this API from the nvme library to nvmf/vfio-user
as an internal API.
UT code will be added back in coming patch.
Change-Id: I54817fc9811ccd9ddd97b3aa6762a2fce4bbdda6
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Now that we've deprecated the RPCs for a release, we can remove the whole
library.
Change-Id: I0f1a357fcfb3404efac39aa021928841c2f22ff1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Bit 1 in the CMIC of the Identify Controller Data Structure specifies
if the NVM subsystem may have multiple controllers or not.
However, multi_host indicated a particular use case such that the NVM
subsystem is used by multiple hosts.
multi_ctrlr will be more appropriate.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I0246096a5cc44721aeff3ff6f96473a2abe11964
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8719
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There is no point in producing USDT probes in unit tests and it breaks
the build on some systems:
ctrlr_discovery_ut.o(.note.stapsdt+0x14): error: relocation refers to local symbol "" [102], which is defined in a discarded section
ctrlr_discovery_ut.o(.note.stapsdt+0x90): error: relocation refers to local symbol "" [108], which is defined in a discarded section
ctrlr_discovery_ut.o(.note.stapsdt+0xf8): error: relocation refers to local symbol "" [110], which is defined in a discarded section
ctrlr_discovery_ut.o(.note.stapsdt+0x15c): error: relocation refers to local symbol "" [112], which is defined in a discarded section
Fixes issue #2027.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic6dad60df1f7dccb7f99777ebc4435c618cb505a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8699
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Now that multiple trace entries can be chained together to form a larger
argument buffer, we can reduce the size of a single entry back to 32
bytes, while still allowing the user to pass multiple parameters.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic92a1413498df28a8561a13c0f06d895d0af2cc6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8407
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds the ability to chain multiple trace entries together to
extend the size of the argument buffer. This means that a tracepoint is
no longer limited to the size of a single entry, so it can have any
number of arguments, and their size is also not constrained to a single
entry.
Some limitations are still there: a tracepoint can have up to 5
arguments and strings are limited to 255 bytes. These constraints stem
from the definitions of tracepoint structures, which could be easily
modified to extend the limits if needed.
To record a tracepoint requiring larger buffer, aside from reserving
`spdk_trace_entry` structure, a series of `spdk_trace_entry_buffer`
structures are allocated too. Each of them acts as a buffer for the
arguments. To allow trace tools to treat the buffer structures
similarly to regular entries, they also have the `tpoint_id` and `tsc`
fields. The id is always assigned to `SPDK_TRACE_MAX_TPOINT_ID` to make
sure that a buffer is never mistaken for an entry, while the value of
`tsc` is always shared with the initial entry. This also provides a way
for the trace tools to verify if an entry is part of a chained buffer.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I51ceea6b6e57df95d4b8bd797f04edbc4936c180
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8405
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Returning an error from this function is not useful - there
is nothing the caller can do with that information. So
change the return value to void. Also add ERRLOG and assert
if a transport actually returns a non-zero status, to
force the transport implementer (which must be an out-of-tree
transport) to make changes as necessary.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I402afec045265db178af821d25b99a6dbe066eab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8659
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a new function spdk_nvme_detach_poll() to simplify a common
use case to continue polling until all detachments complete.
Then use the function for the common use case throughout.
Besides, usage by simple_copy application was not correct, and
fix it in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic14711cd8478bf221c0fe375301e77b395b37f26
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8509
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Was using "dst" in some cases and "crc_dst" in others for crc32c
related calls. Update them to always use crc_dst
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Icf200f1734c64c29881f23b02b8d12bad81b3ca0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Recent work identified race conditions having to do with the
dynamic flow control mechanism for the idxd engine. In order
to both address the issue and simplify the code a new scheme
is now in place. Essentially every DSA device will be allowed
to accomodate 8 channels and each channel will get a fixed 1/8
the number of work queue entries regardless of how many
channels there are. Assignment of channels to devices is round
robin and if/when no more channels can be accommodated the get
channel request will fail.
The performance tests also revealed another issue that was
masked before, it's a one-line so is in this patch for convenience.
In the idxd poller we limit the number of completions allowed
during one run to avoid the poller thread from starving other
threads since as operations complete on this thread they are
immediately replaced up to the limit for the channel.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I913e809a934b562feb495815a9b9c605d622285c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8171
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow to match and compare the DTrace probes with SPDK traces
as they'll be using the same source for the timestamps.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I686c3351428c75f9b618a1a909836504fccad828
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8101
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
This patch allows tracepoint to record a variable number of arugments.
An additional function has been added,
`spdk_trace_register_description_ext()`, which allows the user to
register definitions for tracepoints specifying all the arugments that
they accept. Users can also call `spdk_trace_register_description()` to
register tpoints with a single argument (or none).
Currently, all of the tracepoint arguments need to be passed as
uint64_t.
The trace record functions use variable arguments and rely on tracepoint
description to know the order and the format of the arguments passed.
That means that the user needs to take care that they're always in sync.
Moreover, this patch extends the tracepoint entry size from 32B to 64B,
meaning that there are 40B that can be utilized for passing arguments,
which in turn means that there can be up to 5 arguments per tracepoint.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I9993eabb2663078052439320e6d2f6ae607a47ff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7956
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Move the definition of structure spdk_io_channel into
lib/thread/thread_internal.h, so we don't have to update SO_VER for
other libraries in future when we need to change the internal details on
the structure.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: I3d2ca7a8737972e0b33ce92e464da42c48f89dec
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8189
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1. Update with latest vfio-user specification changes.
2. The new libvfio-user will not expose dma_sg_t data structure
any more, SPDK should use pointer and allocate memory for it.
Change-Id: I619b0c0828cbe3b050c628bff4c4ce7ee840510f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8377
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Community-CI: Mellanox Build Bot
Then we can enable the split for write zeroes request
in bdev layer.
Change-Id: I1341512994b061728cf8c94c0e4e7f86dbc53ce3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7873
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
We face the checksum error when using idxd hardware in vector mode because
we put fields of internal function in wrong union.
When use vector crc32c operation, seed and chained functions and cb's will
be used in the same time, so we should not put them in the same union.
With this patch, we can fix the crc32c computing while using
the vector mode with iov_count > 1.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7097b47294ffd5dcac7d7a83d583321a73dc50d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8213
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
siginfo_t is a GNU extension. SPDK (and DPDK) have
direct dependencies on GNU extensions, but it's a bit
nicer if external modules don't also need to define
_GNU_SOURCE. Currently siginfo_t parameter in the
spdk_pci_error_handler is the only thing that violates
this.
Note that DPDK also supports registering sigbus handlers,
but they take the failing address as a parameter instead
of the full siginfo_t structure. Let's adopt the same
for SPDK.
While here, remove an extra semicolon that was just after
the virtio sigbus handler function signature that was
updated in this patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I07faf11a3ac3589c637cb2196581c102286b1e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8333
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
'typeof' is a GNU extension - let's use __typeof__
instead which is ISO C compliant.
Allows building SPDK header files with -std=c11 as
long as _GNU_SOURCE is also defined.
Next patch will enable omitting _GNU_SOURCE as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibd6c984627b553d6f87f302800abc52157fe9b1e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8332
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
This field was only used to keep track of number of threads
that will be present on a core after scheduler moves.
It was used only internally within scheduler_dynamic.
Event framework has no need to keep such field in core_info.
Instead added field in cores_stats internal to scheduler_dynamic.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3ce74d4a25eac81e58da8705a1c4553730fc1e57
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8049
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch expands spdk_scheduler_core_info with two new
fields that will contain core stats only from last scheduling
period.
This will make sure that schedulers do not have to keep track
and calculate this value on their own.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3aa7dfa6a60c1d14d95a0e684e84c2e83f0a4496
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8048
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Renamed core_busy_tsc and core_idle_tsc to better
describe that they contain particular core stats for
its whole lifetime.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6f16b2b0a162aad8fbaf18f549fc50a2372b920b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8047
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
There is no need to keep new_lcore field.
lcore value is enough to determine the target core.
Meanwhile _threads_reschedule() can see if the target
core matches the one from core_info.
Removed _spdk_lw_thread_set_core() since it did not
serve much purpose.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I82c7cfebf1107b4a55b2af9b891052084a788907
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8046
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
So far the schedulers had to calculate the diff of
current_stats - last_stats on their own to get tsc
from last scheduling period.
Renamed the current_stats to total_stats, but kept the meaning
as stats describing tsc for lifetime of a thread.
Instead change the meaning of the last_stats to describe
the tsc of only last scheduling period and change its name
to current_stats.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1a165ff7c1afe659b432c3127a351a96878d1f3d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7843
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
QEMU 6.0 by default uses a RedHat dev/vendor ID rather
than the Intel one that has always been used to date.
We need the NVME_QUIRK_MAXIMUM_PCI_ACCESS_WIDTH quirk
so that we do not use wide instructions to copy SQEs
to a virtualized CMB, since QEMU does not support
that.
The NVME_INTEL_QUIRK_NO_LOG_PAGES quirk is only needed
for devices with SPDK_PCI_VID_INTEL, so we do not need
to carry this one over to the new REDHAT entry.
Fixes issue #1986.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3d339b3525e7c6ceb792eb9d143e7a922c19344d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8226
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Upcoming patches will add accel_fw support for batching this cmd
and then vectored versions later along with accel_perf to exercise
them.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I59f577f4365fbf063d7419cc6052e10c998b58bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8143
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Was using reserved field. Similar fix to what was done earlier
for direct submission of crc32c operation.
fixes#1972
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie9867e72f60c7f38aa1af0273a036f34580ed4c6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8145
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Mellanox Build Bot
Upcoming patches will add support for the idxd engine and
the accel_perf tool. Also following will come vectored support and
batch versions.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I7223517a844525ad52ed49d65627b04c3cd9fe7c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8141
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Upcoming patches will add support to the accel fw, the idxd engine and
the accel_perf tool. Also following will come vectored support and
batch versions.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ie0fbd4b8da9f727426000898c0b511587adac65b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8139
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Each time the following file
"/sys/kernel/config/nvmet/subsystems/nqn_name/namespaces/ns_id/enable"
on the target side was changed, the SPDK initiator should receive an
async event (type: SPDK_NVME_ASYNC_EVENT_TYPE_NOTICE, info:
SPDK_NVME_ASYNC_EVENT_NS_ATTR_CHANGED).
But actually not.
Since for SPDK, when target sent the non-first event, the condition
"nvmet_aen_bit_disabled(ctrl, NVME_AEN_BIT_NS_ATTR)" that prevents
target from sending event was matched.
This commit fix this issue by issuing a get_log_page cmd for each async
event received, just as the kernel initiator does.
Fixes#1825.
Signed-off-by: tyler.sun <tyler.sun@dell.com>
Change-Id: I2973470a81893456ca12e86ac390ea1de0eed62c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7107
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
In examples/bdev/fio_plugin/fio_plugin, it will include fio.h which
defines the RB_ROOT macro. To workaround the RB_ROOT redefined error,
rename RB_ROOT to _RB_ROOT.
Signed-off-by: Jiewei Ke <jiewei@smartx.com>
Change-Id: Ied4f835e4d1657ca5a0a80c13c72845c774618d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8044
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Adding iov to the spdk_bdev_zcopy_start function enable spdk_bdev_zcopy_start to
be used by transport layers as the iov is owned by the transport command
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I6d2be7f49566048bf25b7711ada8d2fb49fea6ee
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1. struct pxdcap.per is changed to struct pxdcap.rer
Which matches the name in the nvme spec.
2. use new API return value.
3. update specification changes.
Signed-off-by: Swapnil Ingle <swapnil.ingle@nutanix.com>
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: Ida421c4cffd1c65d550e83011ab123b321ea9dff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8088
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
