To check whether the process already killed and if the
process is not there, return error.
This is to fix the below issue:
https://github.com/spdk/spdk/issues/1066
Change-Id: I5f36213237a4b0eed8edbc69e666037cf17488b2
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476127
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Currently the blockdev.sh tests fail due to using a GPT partition on the
hello_bdev portion of the test. On some of the test machines, sgdisk is
not installed, so they silently fail to create the GPT partitions that we
were trying to use.
This change is only geared towards fixing the current nightly failure in
the bdev tests. It does not address the test machines silently failing to
create GPT partitions.
fixes: issue #1107
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: If58201ff4eb7dce9a44e2f93dfe25601ad1b508a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477611
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This test suite was doing some things as far as formatting that are
covered by the run_test framework. Also, the way the tet cases were
organized was obfuscating which migration tests are actually being run
in the autotest jobs. This configuration makes it a lot easier to
manage.
As a side note, migration-tc3a.sh and migration-tc3b are not referenced
anywhere in the test scripts. They may be extraneous.
Change-Id: Ibe6782b38cb87c90b2bc61f112f10cd35f5b4a44
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
apparently getopt used $i when iterating over variables because when
weuse --force and don't set i ourselves, bash throws errors that look
like "line 594: [[: --test-cases=1,2: attempted assignment to
non-variable (error token is "=1,2")".
Change-Id: I89937f1cdd3d3c0557c931a11707df17c7b8d87e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478079
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The shell_Restore_x variable and xtrace_restore were attempting to
accomplish the exact same thing. However, when assigning
shell_restore_x, if -x was not set, then the assignment would result in
an error causing the scripts to fail.
So just get rid of that variable entirely and replace it with the more
robust xtrace_disable, xtrace_restore mechanism.
Change-Id: Ic823ad8433bd3dc181aaa0930297cd9d74bcf528
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477966
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Previously, if you made two sequential calls to xtrace_disable without
calling xtrace_enable, you would lose the original value of x. Now this
is not the case. It allows us to call xtrace_disable freely without
worrying about whether xtrace_disable is invoked later in a function we
call.
Change-Id: I9818ae97532e7a31db576bb9bd2e2e30d67ab410
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477965
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
With DPDK 19.11 rte_eal_get_configuration() and rte_config
structure were made private. Those were only used in
the inline rte_lcore_count() included from DPDK.
After the update they were no longer available.
Since only rte_lcore_count() was used directly in crypto,
mock that and return 1, as was done previously.
This was tested with DPDK 19.08 and DPDK 19.11.
Change-Id: I13e4d9743b17a34ad786283f8b567d01e036d368
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477841
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This went unused in the unit tests.
Tested with DPDK 19.08 and DPDK 19.11.
Change-Id: I738919379b5751697f9533f72fbaf77993cb6fb5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477840
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Operations to queue iSCSI tasks are in iscsi.c and conn.c and cross
references due to this separation makes us difficult to create unit
tests.
This and subsequent patches will try to disentangle cross references
by moving some functions from iscsi.c to conn.c.
This patch moves spdk_iscsi_conn_handle_queued_datain_tasks() from
iscsi.c to conn.c. For unit tests, we don't add anything new in
this patch and just create necessary simple stubs. After code
movement, new unit tests will be added.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If5b8501a1ef7ea53682a3437c7eb2375aa52ee3b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Subsequent patches will change trace functions to be called in
unit tests. Using stubs is enough as done in other libraries
and do the change in this patch. For iscsi_ut.c, add stubs to
not iscsi_ut.c but common.c to cover other files.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia14bc932f451b14bdb0ba6e0cb949463490a879e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Using "={}" at definition is clearer and saves lines.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I75a99583f1ecc84d4c47cacd9ce58034edb4e756
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Using "= {} at definition is clearer and save lines.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I410279bd3640e03aa9b6eeb488be4404d110b0bd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If a spdk_bdev_io cannot be completed, because it is sent to a zone that
is currently busy, reschedule its submission. This mechanism will be
used by appends, as mutliple append commands can be directed to the same
zone at the same time.
Change-Id: I60da2bd1835380812d22536ea275fb8fed9f8561
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477437
Reviewed-by: Mateusz Kozlowski <mateusz.kozlowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch adds support for saving JSON configuration of the OCSSD
bdev module required to recreate the current state.
Change-Id: Iedbdb8b4a2b7dd02a223ce6f073553e71b9c040a
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469090
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
OCSSD bdev needs to keep track of some portion of zone's state (write
pointer, its capacity, whether it's busy) in order to support the append
operation. To achieve that, all the info needs to be retrieved for all
of the chunks and translated to zone format.
Change-Id: Id88282576aba337b50e7c7e1b9e9ff5aba25a3db
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added zone information command translating Open Channel's chunk
information to spdk_bdev_zone_info structure.
Change-Id: Ifdb15f2e0ea2fb8422810fa64f18942fcb6e4582
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468213
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added zone reset command. It's very similar to a regular data set
management deallocate command with the only difference being that it
operates on zones instead of blocks.
Change-Id: Iae4d77c6877b6906231336b13fad1167de149f20
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/467920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Use env variables to select custom qemu-img and qemu-system-x86_64
binaries. This is needed to test versus latest Qemu versions from
Github.
If env variable QEMU_BIN is not present then the defaults for test
are system-wide installed packages.
This partly reverts changes done in patch:
5502294d76cd68a761a6bc0dd6d294e3a896c1fb
which removed possibility to run with custom Qemu binaries.
Change-Id: I8138a079ba7013dcd97aad95ae2eed6417f5b18c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477776
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This eliminates the flushing logic, simplifying the tcp
transport.
This also happens to greatly improve performance, especially
on random read tests. The batching done in spdk_sock_writev_async seems
to be more effectively than the previous batching logic in the tcp
transport.
Change-Id: Id980ac6073e380dc75f95df3f69cb224f50fb01b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470532
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is preparation to add flags to the call.
Change-Id: I36109c069b42bd3ec22e023079c62d41a435f44c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471771
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Add an additional queue for requests that have been sent on the network
but aren't complete yet. As of this patch, the code
is still calling writev with no flags in the POSIX layer, so it completes
synchronously. That means requests pass through this new pending list
only very briefly inside of one function.
Change-Id: Iaab6efc118a6d5fe9589199515eb3a7293db4b8e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/471768
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add spdk_sock_writev_async for performing asynchronous writes to
sockets. The user of this call is responsible for allocating their own
spdk_sock_request structures to pass to this call.
spdk_sock_writev_async will not return EAGAIN and will instead leave the
requests queued until they are fully sent or aborted due to socket
error.
Change-Id: Idf3239e65d26a3024e578122c23e4fb8f95e241b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470523
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add the unit test to verify the submitted list,
timeout IO poller and timeout IO check.
Change-Id: Ie7832cc29e19a624328a1a96cffe313bf9f18a69
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476051
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
The macro DMIN32/64() are local in iscsi.c. Replace them by the
generic macro spdk_min() will improve the portability.
Replace it in test/unit/lib/iscsi/conn.c/conn_ut.c together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5f6992b3dc091cd748b4e138810fb01761a1ab24
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
spdk_iscsi_is_deferred_free_pdu() is called only in a single
place of conn.c. So change it to private in conn.c. Additionally,
iscsi_is_free_pdu()_deferred() may be a little more meaningful
and rename to it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic1e3d7ff435c454f40e81f9a4f90fe76589ec7b2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477189
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Re-order operations in abort_queued_datain_task_test() to align it
with comment, and fix a type error.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Idde4726bfe370ad742b2de67e0786aebb7237d45
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477409
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We changed read I/O submission to stop splitting when detecting LUN
hotplug very recently. We can do the same refinement for read I/O
abortion.
In _iscsi_conn_abort_queued_datain_task(), set all remaining length
to the new task and complete it immediately. We keep the code to
process the case that queued_datain_task completed but is still in
queue, but we can change its if condition to assert.
Simplify the corresponding unit tests accordingly, and set
task->scsi.transfer_len in abort_queued_datain_tasks_test() to
exercise the changed paths.
In iscsi_pdu_payload_po_scsi_read(), if task->scsi.transfer_len is not
larger than SPDK_BDEV_LARGE_BUF_MAX_SIZE, no minimum calculation is
necessary and we can substitute task->scsi.transfer_len to
task->scsi.length simply. This change is too small to be an independent
patch and is done together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iea93e51b103eae141a007a0abdaf13cbe6d5287f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
The hardware sgl format can describe large contiguous
buffers using just a single element, so it's more
efficient that a prp list even for a single memory
segment. Always use the sgl format.
Change-Id: I9c62582829f0d64dcd1babdbc48930ddb4d9e626
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475542
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For TCMalloc regions which we register with spdk at runtime in the MMapHook, we
need to ensure that SPDK doesn't do any allocations in that path otherwise we
will hit a livelock situation. MmapHook is invoked when TCMalloc is out of free
memory and needs to get more memory from the system, for the hugepage case it
gets via mmap.
In the current code, we could end up calling malloc in the spdk_mem_register
call via the following call path.
spdk_mem_register -> spdk_mem_map_set_translation -> spdk_mem_map_get_map_1gb
To avoid this livelock situation we call rte_malloc instead which shouldn't
invoke the system allocator. Note that in try_expand_heap_primary() which is
invoked in the rte_malloc code path, we can still call malloc, so we need to
only use this when dynamic memory allocation is disabled via --legacy-mem.
It is possible in the future we could work around even this limitation,
but for now this implementation will be much simpler.
Have verified this change fixes the livelock condition which I was hitting in
my setup without this fix.
Change-Id: I69d0813a70da1f26f8c4d9d8895e406c026be18b
Signed-off-by: Alok N Kataria <alok.kataria@nutanix.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475943
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
We will use this in a future patch to determine whether it's safe
to use DPDK allocated memory when allocating new 1gb page entries.
We could use it in this patch to decide whether or not to register
the memory hotplug handler, but there's really no harm registering
it even when it's not needed.
Ideally DPDK would provide some kind of API to query how DPDK was
configured. In the normal case we know whether legacy-mem was
specified, but if users initialize DPDK themselves and then call
spdk_env_dpdk_post_init(), we won't know if legacy-mem was specified.
So in that case, we will just assume that it wasn't specified.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ied0e5ff777c8ee651043f46a37ce62e44bfcc5fe
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is used to test the pending buffer policy
of nvme request which has incapsule data. When
group->pending_buff queue not null , we should make
sure spdk_nvmf_tcp_capsule_cmd_hdr_handle method still
can handle the request.
relate to : issues/995
We try to simulate the following manner: If there
is req waiting for the buffer in the list, the
nvme request which has incapsule data will be
handled firstly even it is added into the
pending_buf_queue. The reason is that currently,
those command will get the buffer from its own queue.
We made these test steps:
1. submit a tcp request into spdk_nvmf_tcp_req_process
and make sure it pause in group->pending_buff queue
2. submit a incapsule tcp request into
spdk_nvmf_tcp_capsule_cmd_hdr_handle method , and
this method will call the spdk_nvmf_tcp_req_process
method to handle this request.
3. check whether the incapsule tcp request is handled
correctly. and check the group->pending_buff queue
remain.
Signed-off-by: jiaqizho <jiaqi.zhou@intel.com>
Change-Id: I85fcbb49e309e1203b4b308115e3bfefc0fcba2a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472665
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a significant simplification to the whole test script. Note, it
does force us to run the hello_bdev example against a gpt bdev instead
of an nvme bdev directly, but I see this as an acceptable tradeoff since
it seems like the purpose of running the hello_bdev example is mostly to
ensure that the example itself is not broken.
Change-Id: I8c2a1ede8e7ece2a82222593a7ae46704cc658af
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This test specifically gets a little more complicated looking when we do
the test this way, but the goal is to enable deterministic reporting of
test completions on a per build basis.
Change-Id: Ica36986f821337c22654fb4cc25f9a72a3d73517
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476825
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test has always relied on /dev/nvme0n1 being the location of our
test drive which means that it is the only one in the system at the time
the test is run.
So instead of trying to loop multiple non-existant nvme drives, just
call it out directly.
Also, add a todo to remove the dependence on NVMe0n1 since we could run
this test on a machine where the main filesystem is on an NVMe drive
which would break this test.
Change-Id: Ibb2448d9367a5c80d85a1c91b0c6e44e58237751
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476952
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We had very granular timing reporting on this test, but we really only
had two test cases running for the whole thing.
Change-Id: I11650e124e24e93b1f217c6b8efd2fb006284515
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This cleanns up the logs for this test and makes it easier to follow.
Change-Id: Ifc6fcea8672d4d186e3e622eddfc200fdfd076ce
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476822
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes the script much more readable and helps delineate test cases
more clearly.
Change-Id: I729ca0380a7173151d074ebd73ed9766c5008480
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This unifies the script and makes it easy to see what exactly we are
testing.
Change-Id: Icdbc08077ea4397bfde50493c718f99c3c499062
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476809
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
allows us to remove a lot of extra timing_* calls.
The next several commits are aimed at converting the majority of the
tests to this single framework of using the run_test suite or run_test
case function calls. Hopefully it makes it much easier to understand the
logs over time.
Change-Id: I6d46982108be469a05f70c24b373e60726aa061e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476805
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
And clean out the corresponding calls to timing_enter and timing_exit
from the various test scripts.
Change-Id: I0759417b5a529e4c3649ce04cca1799c089da278
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476804
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
make sure we have enough arguments.
Change-Id: I76ce35635ef14289061323ee401d93d8d081888c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
