When zcero copy send is enabled and used by initiator,
it could significantly increase latency in some payloads.
To enable more fine graing configuration of zero copy
send feature, add new parameters enable_zerocopy_send_server
and enable_zerocopy_send_client to spdk_sock_impl_opts to
enable/disable zcopy for specific type of sockets.
Exisiting enable_zerocopy_send parameter affects all types
of sockets.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I111c75608f8826980a56e210c076ab8ff16ddbdc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7457
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
All JSON-RPCs must be documented in jsonrpc.md
Change-Id: Iec9119a01433fd0cbe4df4477ce94cc2feeb0d54
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4074
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Community-CI: Mellanox Build Bot
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I9b9f8c9e407425fdab1e84050354481ad76c19c2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6655
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Rename to target_nic_ip to better match NVMe-oF
terminology.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0644410cfb063eeea740c54f5860aeefdb52d52d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7089
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK directory needs to be copied to initiator systems
earlier for set_irq_affinity to run.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0f9ade02e58c9224e0b2ddc75117baaf653be614
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6776
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Need more investigating how to properly enable ADQ
for Kernel mode. Do not run Kernel + ADQ configuration
for now.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I700ef417b9b398c067a586a1a5ad9947a92057ad
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6566
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Readme was frequently missed when adding new stuff or
updating the performance script, and it is out of date.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1710473be576ffbcc2fa8e3701b196bd46cf6654
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6538
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Create a default traffic class (tc0) with minimum
needed number of assigned threads and a priority class
(tc1) with number of assigned threads equal to
number of application threads.
Finally run set_xps_rxqs to configure symmertic queues.
set_xps_rxqs script used from Intel ICE driver
package available at:
https://downloadcenter.intel.com/download/29746/
Intel-Network-Adapter-Driver-for-E810-Series-Devices-under-Linux-
Change-Id: Ie0f2db266621a9dabb1621344bfdc5fa64fee03c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6537
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
There are multiple cases for counting number of CPU threads
on Initiator side. Keep track of num_cores in all of them.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I4b8d1d79a2aa17706d206b149c1c8e8816ae2ef5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6536
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Set busy_poll to 0 for non-ADQ. Having it enabled with
this value results is huge latency increase.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ic68ed2b7dc19b8d4b274ce8622194489693863cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7480
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
ld on some distros, e.g., ubuntu1604, doesn't include this particular
path in its SEARCH_DIR list. Add it manually to make sure linking
towards liburing is possible in such a case.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I82d7ed870ec9ff257dc72a386f950addb5476d1b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7022
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Added mainly to verify if the PMR setup on the VM is correct.
Example of an output with PMR device size of 32M configured for
two nvme devices, and one nvme device with 128M CMB.
[root@fedora31-cloud-1614680581-9ba06c102 ~]# /tmp/get-pmr
nvme0:0000:00:04.0:64-bit:prefetchable:0xf0000000:0xf7ffffff:0x08000000:cmb
nvme1:0000:00:05.0:64-bit:prefetchable:0xf8000000:0xf9ffffff:0x02000000:pmr
nvme2:0000:00:06.0:64-bit:prefetchable:0xfa000000:0xfbffffff:0x02000000:pmr
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I522cebd8b5a16f8a37c6e0e01a0288fb310467fb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7019
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Available in qemu >= 5.1.0. Note that since CMB and PMR share the same
BAR they cannot be used together. If both are specified, PMR setup is
skipped.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia0c6681b5ac7563efc6c32d2fff1808814196676
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7018
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
-x is supported since 0.4.0 release, make a note of that.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Icc64132536c18108029f6c5fa2cbdd5b27018d8b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7417
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Change-Id: I4ed583d91ae9e820be1ee6f4553f29d6650c4922
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5791
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
num_cores name was misleading, as the parameter actually
contained core mask (or core list). Create separate
class attributes with core mask and number of cores.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Ibfae7770aea2f2c1c720abf567400deb50028ab4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6535
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Save info about subsystems created subsystems (target
side) and remote subsystems (initiator side) into
a list.
Change-Id: I7ec1c6a4d1f75060b69b68e0b8e0dd61789fc9e0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6374
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Run set_irq_affinity script after irqbalance service
is disabled and manually tune IRQs to be run only on
the CPUs local to NIC NUMA node.
set_irq_affinit.sh script must be manually downloaded
as part of https://github.com/Mellanox/mlnx-tools/tree/master/ofed_scripts
package before running tests.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I67b3c851bcf283caea29ad36f6d4bc0322ca0d27
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
In performance tests always use best performance policy.
Previously this was manually managed on test systems,
but it's better to do this automatically every time.
Change-Id: Iff81863cf8d9cc713a3c4cce1d8edf7ebbf81c84
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6373
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Modify CPU power management settings to achieve high,
consistent results.
Change-Id: I3602ae7523c5b83878238928caaeb453f7d2533e
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6372
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Tune sysctl parameters for TCP testing. Restore previous
settings after tests have finished. For ADQ-enabled tests
also set proper value for busy_read option.
Commit includes a fix to initiator exec_cmd() method to
allow using command parameters which contains whitespace,
otherwise it's not possible to set some of sysctl params.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3376b69b8d7c0d8a282765db4fe55824f55f9e05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
Disable all unnecessary services which might affect
tests performance.
Managing services implemented in a very simplified way
usign subprocess and configparser modules (because json
output is not available). Proper implementation would
need to use a proper dBus API, but this seems like an
overkill for such a script.
Change-Id: I72feec4293b77442a9d2c9b4afaa032df1c4d5e1
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6264
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Configure NIC settings as per ADQ configuration guide.
Change-Id: I957aada267474c2a1448c89a1b7c81d4dd261ca6
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6263
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If2784b74ece6c48b81cc53e63412cd2bc618ffef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6262
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use common method name and parameters for calling
subprocesses for local (Target) and remote systems
(Initiators) instead of using "check_output" (from
subprocess module) and "exec_command" (from paramiko)
separately.
Having these functions wrapped by a single common
method will allow to create common methods in Server
class more eaisly, instead of creating two copies in
Target and Initiator classes.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I1c10f6a88f3d7300c227e969ad6fd901763ac52c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Parse the config file for "adq_enable" flag and enable
the option in SPDK Target and SPDK Initiator configuration.
At this point the flag has no effect on the generated
traffic, as the system and priority queues are not
configured properly. These settings will be added
gradually in following patches.
Change-Id: I5d7bc892f3aa7bbe691b7e0983294b56fcf994f5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6260
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Get detailed info about NICs installed in servers. This
is using lshw utility to make things easier and not
implement the whole logic for parsing /sys objects and
pci.ids listing in system.
Change-Id: I97871fdc9feaae1c2485574a7b488b88ac3afc4f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
The number of options for test execution grew high,
and we still need to add more. This results in a lot
of parameters to pass around in constructors, which
is hard to read and causes pylint to complain.
Instead of passing each option individually as a
separate parameter, pass them as dictionaries just
like they're defined in .json config file. This
makes managing the default values a bit harder, but
is more readable.
Change-Id: I5d88a2b7fe51d2df93edd9130678a937d34facdd
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
collect_devices() is split into two functions:
- collect_net_devices(): Collect ethernet net devs from the
net class.
- collect_rxe_devices(): Collect all rxe devices from the
infiniband class.
This is done in order to make handling of some conditions easier.
Case and point, in newer kernels, device/net link is not anymore
created for the soft roce devices, instead only ./parent attribute
is available. collect_rxe_devices() is adjusted to handle such
a condition.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Idefa39c4a62c9e650a03e237f49940461e9782a6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6992
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Put plugin parser into a separate function and use it to additionally
parse arguments passed to rpc.py via stdin.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I170d762ed9f5483d92b298f4804ee4e9f227a751
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7145
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Older losetup versions loaded "loop" in background, but
with 2.36.1 this doesn't happen. We know we're going to
use this module so let's load it ourselves.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If3364e92817ae9f09e9897872bd61ca9167184a1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7086
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, reference repos which are used to clone the SPDK repo in
the CI pool's systems don't provide master head refs, hence there's
no easy way to diff against it.
Instead, simply run shfmt against all the bash files in the repo.
Impact on the performance should be minimal.
Also, cleanup some related code which is not used anymore.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie0d4e35b8ad214ceed1b4ea29b01a7423b8ff73b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6824
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is done in order to minimize vagrant work on the CI side. Users
may still provision given VM with full configuration includin these
pieces by running create_vbox.sh with -d argument.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I7f494958e06d4e3b047938dda0bd102da824d235
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6733
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
vagrant's shell provisioner uploads files to /tmp, however,
vm_setup.sh must be run from the repo to find all the source
files. This requires the repo by synced over to the VM as well.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iaf16f066af10739589aa584f57c2b89f5c5202e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I191ad5e3b153fb563256eba1aa695716f66db788
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6377
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Leverage SO_INCOMING_CPU to get the CPU affinity of connections
(sockets). And allocate the connections to specific poll groups,
which aims to utilize cache locality.
From our test:
6 P4600 NVMe on target,target uses 8 cores, NIC irqs are bound to
these 8 cores, and initiator side uses 24 and 32 cores,
we can get 11%~17% randwrite performance boost for posix, and 8%~12%
for uring.
Change-Id: I011e0a21502c85adcccd4a14fbe9838b43f54976
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5748
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We need to catch the JSONRPCException when we cannot
connect, so that the error message can be printed
more cleanly. Also suggest to the user that maybe
they don't have an SPDK application running when
it cannot connect.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I497bed86573d5bf07a2b48b3d6682a2427aa4987
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6754
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Also, for consistency, use check_for_driver() while checking if
igb_uio is loaded too.
Change-Id: I00302b3cab169c77032fc0cef0ea384e9e5eb5be
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5303
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
nvmf_create_transport rpc parameter to configure the CQ size helps
if the user is aware of CQ size needed as iWARP doesn't support CQ resize.
Fixes issue #1747
Signed-off-by: Monica Kenguva <monica.kenguva@intel.com>
Change-Id: Ia9ba2b5f612993be27ebfa3455fb4fefd80ae738
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6495
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There's almost no benefit coming from it CI-wise since all our VMs are
already fully provisioned. The speed up of nightly jobs, which do run
package updates, is minimal. Overall, it only slowers deployment of the
autotest VMs.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I68d9530533f0b0d7d2fb72ce82706d6bc0cf2e6e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6637
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For OCSSD disk case we create two files, but only one was later
chown-ed.
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I411f0717f5416ba012e2e90582b60ec892d2744e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6170
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
- throw error instead of silently skipping create disks on
non-linux OS
- early return/exit from script
- add quotes around disk name
- use case/esac to check WHICH_OS
- other small syntax changes
Signed-off-by: Pawel Piatek <pawelx.piatek@intel.com>
Change-Id: I71879bf635ecb275e805b6fcb3ec9d6bc3bc299f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6169
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also, add some minor tweaks for the add|rm routines.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I39cdbec2c0aca12e7077d8db161e65fdce7ca19f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6241
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Rationale behind e663dc82ad which put this package as a dependency
into pkgdep was that it shouldn't be exclusive to vm_setup.sh.
However, this particular package causes unnecessary kernel upgrades
whenever newer version is detected by dnf|yum. This behavior is out of
pkgdep's scope and as such similar upgrades should be performed via
vm_setup.sh only where its sole purpose is to configure system on a
wider spectrum.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I066105f95834f3f8d436b9ff52ec1f2bf97844af
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6437
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Interface names will later be needed for additional
test options.
Change-Id: Ic16d305a97087ab1fdc35d5fd5a3d1ed2a021d90
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6206
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
So far the information about remote target IP addresses was
stored in "nic_ips" attribute. Add a new "remote_nic_ips"
attribute to be able to differantiate which IPs are local
to given Server class object.
Change-Id: I03dac140241341996674b350c51c18da6e2ee447
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6205
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It has been confirmed that there is no affected use case in
the SPDK community when we remove the range parameter from
the bdev_ocssd_create RPC.
Hence, remove the range parameter from the bdev_ocssd_create RPC,
remove range parameter from bdev_ocssd_create_bdev(), remove range
info from ocssd_bdev_config_json(), and then update unit tests
accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1b0a541b61bf26732fd028dc43becb7ca2384f8e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6220
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Simon A. F. Lund <simon.lund@samsung.com>
Change-Id: I039a2e22a665e0d52082e6876f2c7c1cd9a336c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6386
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
Function bdev_nvme_create accpets new parameter - ctrlr
opts which is passed and filled by RPC handler. That
will allow us to add config parameters for other ctrlr
options with minimal changes.
Change-Id: I96ac1b21e7a3816c652765cddade75423eb843ca
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6023
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Checking only the .sh suffix was omitting ./configure and potentially
other bash scripts which don't necessarily have to include said suffix
in their name.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I6196559e8875de46f80d9c8426577a1a79b5996d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Recent builds with mainline DPDK failed due to missing
python dependency "elftools". This patch adds it to
our system provisioning scripts.
Fixes#1770
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I9e3879d9bddd64bb0f7be81120e5fadebefa9eb8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6103
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Monica Kenguva <monica.kenguva@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
If config without this field was used then
script resulted in KeyError exception.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Icf0b270d28dcc6bf44b66c4b9ed583a6b3ef08b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6204
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Standard lib modules first, then pip installed modules
and local modules last.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If0159fad29bab5bef0b69aa803e3cea429cc5f25
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6202
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Users can use "--with-vfio-user" to enable it when testing it.
For CI configuration, we add a new test flag SPDK_TEST_VFIOUSER
to enable CI tests.
Change-Id: Id284df721171d01cc52491ebf4088bcc17eee147
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6139
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added rpc to get name and period of currently set spdk scheduler
and name of currently set spdk governor.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I5562a81a7f9e4879bd48a765c9467f70b43f73ab
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5917
Community-CI: Broadcom CI
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using shell=True was unnecessary, as it spawned additional
shell process for any subprocess with this option set.
We don't need that in this script and it's generally
discouraged.
Also removing check=True from some calls as don't have
these subprocess calls in try/excepy anyways.
Change-Id: Ibb9b5d71119c9dd877209ea77b8351f9b610cade
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6046
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Instead enabling each measurement (cpu/power/memory) just
use a single flag and enable them all at once.
Change-Id: I8a639b697285aa741f28b5ddec11ce70c34fc760
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5980
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Use terminate() instead of kill() to exit more gracefully.
Using kill() resulted in (sometimes) output not being saved.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3ff1dec8cb0804f6e0674c5ed61bbe4ec9ea70ef
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6045
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
"measure_*" threads in script use the same results dir
as the results parsing function. To avoid race try to
create results destination directory early.
Change-Id: Ic391a7c2fb3decff64f1fdf51782abb940706d38
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6044
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
DPDK 20.11 moved the kernel modules to separate
dpdk-kmod repository. It has to be built separate
from DPDK.
If needed for testing vm_setup.sh script now contains option
to build this driver.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I98a5eb956eb0cc60ec402d88fcdbd66d4854f19a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6033
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Enable pcm-power measurements with appriate option.
This will be used for scheduler tests.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I57acc9905c6f1acd7bc3ecdbf886b209a2cdb653
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5979
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Users can now generate the necessary linker args for their
own applications using something like:
PKG_CONFIG_PATH=build/lib/pkgconfig pkg-config --libs spdk_nvme
Dependencies between libraries are included in the generated
.pc files, so the user only needs to pass the top-level subsystems
or individual SPDK libraries they are using in their application.
Modules will automatically be added to the output if the associated
library is specified. For example, specifying "spdk_bdev" will include
the libraries not only for spdk_bdev, but also all of the bdev modules.
Users still need to supply the -Wl,--no-as-needed or -Wl,--whole-archive
flags. They cannot be added to the .pc files without increasing the length
of the argument string by a factor of 15x to 20x.
Modify the test/external_code/hello_world Makefile to use pkg-config to
ensure this gets tested at some level in our autotest environment.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie48a75f11969d5d775d514cf10bcb82d197eabfd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4371
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Usually null bdev is used in testing.
The resize function provides flexibility
Change-Id: I603db0b85ff13a86d38ccc8dd6f260807393df93
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5797
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Period parameter is marked as optional in rpc.py. This works
as long the rpc call is issued with rpc.py, as argparse
sets period to "None" by default. This patch makes it
an optional argument as well directly in app.py.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I2e3cae6df7edd7fc6e1120ee3d4a2655dc60813a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5942
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Sections 'Nvme', 'Nvmf', 'Bdev' and 'iSCSI' were always present in
the output of config_converter. Even when they were not present in
the legacy config.
This posed an issue with iSCSI section. Support for iscsi_set_options
is part of lib/iscsi, that is not compiled with all applications
(such as nvmf_tgt).
Fixes#1741
This patch checks if there is corresponding section in the legacy
config, and only then presents the JSON output.
Added test to verify output from empty legacy config.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ief94e92115dbd80c890dcb434b7c6d5376421c9e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5879
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
JSON configuration that does not contain a particular
subsystem is a valid one. If needed, the defaults are always
present in the subsystem itself.
accel, interface, net_framework, scsi, nbd do not have
legacy configuration to convert. Including those in the
output of config_converter does not serve any purpose.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6442ac1b8f65ac7271102e782068846f86c2d09f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5878
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is for packed ring and recover the ring
base when vhost target reconnect to QEMU.
Change-Id: I73f791b4a55adf9834112afd7dd7bb26c75a135d
Signed-off-by: Jin Yu <jin.yu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4128
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
JSON-RPC allows for methods that do not contain any params.
Turns out that so far this scenario has not occured for load_config or load_sybsystem_config
RPC, which processes JSON config file saved from previous app run.
Next patch writes out bdev_wait_for_examine to bdev subsystem
configuration. As that methods does not contain any params following
error was seen:
# /home/vagrant/spdk_repo/spdk/scripts/rpc.py load_config
Traceback (most recent call last):
File "/home/vagrant/spdk_repo/spdk/scripts/rpc.py", line 2671, in <module>
call_rpc_func(args)
File "/home/vagrant/spdk_repo/spdk/scripts/rpc.py", line 2601, in call_rpc_func
args.func(args)
File "/home/vagrant/spdk_repo/spdk/scripts/rpc.py", line 100, in load_config
include_aliases=args.include_aliases)
File "/home/vagrant/spdk_repo/spdk/scripts/rpc/__init__.py", line 143, in load_config
client.call(elem['method'], elem['params'])
KeyError: 'params'
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4a56a9d0caa4b752fb9c1fad4ae581aad8a4c2c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5860
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add spdk_bdev_wait_for_examine() API to be called
in order to report when examine on all registered bdevs finished.
It will be built in to most bdev modules RPC.
New RPC added to allow
- building it into bdev submodule
- user/orchestration to verify examination status manually
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I27db3ae42eea3e692faeea4c2a01d04586bff438
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5480
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
py27-pycodestyle was dropped and is no longer available for the
amd64 arch. Use py37-pycodestyle instead (it should be available for
other common architectures too).
Change-Id: Icb56860d358e2fa06f202a47302a5005b32708e3
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5877
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
This is done in order to track core dumps in a more efficient
manner. Till now, some cores could be missed if the binary was
executed outside of the cwd of the autotest (i.e. outside of
the spdk repo) but which was part of the critical path of the
actual test (e.g. fio in vhost-initiator tests). Also, since
core_pattern was set to plain "core", impact on the underlying
storage wasn't controlled either - if core was 20G in size,
this is what we would get. This could easly exhaust storage in
case error-prone patchsets were submitted on the CI side.
The collector will try to mitigate all the above by doing the
following:
- collecting all the cores, regardless of their cwd
- limiting size of the core to 2G
- compressing the cores (lz4)
Also, limit of 2 collectors executing at once is set - if more
processes crashes at approx. the same time, they will be logged
in the kernel log instead.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I5956a9030c463ae85a21bfe95f28af5568c5c285
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5369
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I1933b1c3026c86b55c3e2b712bff02fa8f711bc7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5446
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch includes the following work:
1 Add two fields in spdk_bdev_opts structure and make the
two fields configurable.
2 Update the unit test in bdev_ut.c
3 Revise the set_bdev_options rpc call and add the support
to use the two new fields.
Change-Id: Idd6073b3a3ffaba8161e3ffa9444a9e533e67f6d
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5664
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are transport types like vfio-user or fc for which this field is
optional so there is no need to explicitly specify it for the add
listener rpc. Still validation of this filed is preserved for rdma and
tcp transport.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I6aef55bed45b3653472fd356e5a7cfead22c6f2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5605
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This reverts commit 6d87bc7a8a.
There is an issue with the desing here i.e. lifetime of the subsystem
opts shall be associated with the subsystem but the transport specific
layer is not having any notification about that. As an alternative to
the transport specific subsystem opts listener interface was extended
in a previous commit.
Change-Id: I75c4e329e411a91694959db18ff1955774f0993e
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5571
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In recent Centos8 updates name of the "PowerTools" repo was changed to
"powertools". Since config-manager will fail if we provide a faulty
name of the repo, we need to make sure we tell it to enable what's
actually present on the system.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iff0c6103d1375fc42f5c967cd713e3e5089f4723
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5478
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
If the sriov_numvfs sysfs attr is not available for given controller
report that. Also, verify if number of VFs matches initial value
of 16 devices. If not, report that as well. This number was also
being overwritten with the set value from previous device - this
could false-positive the confirm check so keep the set value in
a seperate variable.
Change-Id: I518464518dd75585c4692c8ec1b3268e798dcf6c
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Mellanox Build Bot
