Fix up all existing spacing errors in comments and add an automated
check for patterns like /*comment*/.
Change-Id: I28f61c93612dc0f8aed66bd509da78e91ea9737e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Also adds the automation test case for using remote
NVMe devices exported by NVMe-oF target.
Change-Id: I2b839a4eeec33d5b0c30d654e6013ad8c7949e23
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
The new format is: domain.bus.device.function
For this format, since we use '.' as separator,
to avoid misusing, we only support the following:
1 domain.bus.device.function ( 4 values provided)
2 bus.device.function (3 values provoided with domain = 0)
3 bus.device (2 values provided with domain = 0, function = 0)
Change-Id: Ide03db38b4ac7802cf36f0e536e8b997101d6cd3
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
A 100us is so small that applying the quirk to the specific
SSDs that require the delay is more trouble than it is worth.
So remove the quirk and always wait 100us before re-enabling
the NVMe SSD during initialization.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id6a8cc6e35d103fffdf135580301fc3e5b27e722
The bdevperf reset test only executes in the nightly test run, so this
problem wasn't caught during review.
It gets stuck in an infinite loop and produces lots of log output; turn
it off to avoid filling up the disk with logs until we determine what
broke it.
Change-Id: I7601ba324a0531de3733cf5784ccd46da5618082
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Queue aborts that would exceed the abort command limit
in software as a convenience for the user.
Change-Id: I8c1f0380984cc6c0cdb453db961939a7f571b336
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Core dumps stop working if the path is longer than 64 bytes.
Use readlink to shorten some of the very long relative paths.
Change-Id: I5e7eb6580ca581c5ac3a71afb7b62953836e2660
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
It has been discovered that some devices require
a very small delay before writing CC.EN to 1 after
CSTS.RDY goes to 0.
Change-Id: I73d31726d17ebf5bbec7ee528e2f98fcd05234dd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This patch removes comments within configuration files for tests
that are not relevant to the test itself.
It reduces the need to update comments in test config files with each update.
As well it makes those same as other test configuration files.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I48116613435fadf0738b5a948d32f458c7ce06be
In the cache_append_no_cache test case, we need to
sync the file first, before calling cache_free_buffers().
Otherwise the buffers do not really get freed since they
contain dirty data.
This fixes a couple of memory leak bugs detected with
CONFIG_ASAN=y.
Reported-by: John Meneghini <john.meneghini@netapp.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If1ff6ed7d9e7a6dc67af0a2baf3b2555ace610ee
This parameter is not actually used by the unit
tests using the bdev, but setting it to a non-zero
value silences a couple of static analysis errors.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id53a17bcd1f4ec51f35a954ec0f6e6ea9803086e
This fixes multiple SCSI reset issue.
This patch does not remove sleep in iSCSI tests.
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I5e9f3705e5dc34004b9d1b9e40fbdcb04a3bee4e
Some intermittent issues still observed with multiple
resets in quick succession. Reverting for now while the
issue is more fully root caused.
This reverts commit 7fa7f91ee3.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I493b564e8a110bbfb7a6cc47107d53d6eca40053
Automated test scripts now set up 4096 huge pages by default,
so we can now safely allocate the default 4GB for blobfs cache.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8aea322068a5df79ca75737c43a4e0e80e7d2be4
The bdev product_name field is used in the Inquiry command translation
and was previously uninitialized.
Change-Id: Ie9d056ddaddfbb60ce5c3444ed87f852c00a296d
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rather than re-running setup.sh during the vhost tests, just
pre-configure NRHUGE to the necessary value for all setup.sh invocations
during autotest.
Change-Id: I1a4d9a7f7ab52082a8f626c3c64807417a493b5f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Negative queue depths, I/O sizes or time durations do
not make sense, so exit() if user input contains any of
those cases.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9d0261d1151f41dfc11013c797bf949b736ebba3
For the automated tests, use this to directly write output
files to the output_dir.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I403f51a4f4d0cac0fca7ec610527bf616f97b20d
Change NO_PERF to USE_PERF which defaults to 1. This
will be overridden to 0 if set to 0 in the environment
or perf is not available on the system.
While here, disable perf in the automated test suite.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia182f6a3068d0da631973d4010dce24bd0f98eb5
- Renamed to integrity filesystem test
- Add detecting if qemu is installed
- Default vhost.conf using NVMe; ramdisk may be too small
for copying & building both dpdk and spdk
- Use kernel source (present on VM) for running test compilation
- rename to integrity test
Change-Id: Id369a5aac3008700cffbc51a5197b72f10645a1b
Signed-off-by: Karol Latecki <karolx.latecki@intel.com>
This is the initial commit for "blobfs", a lightweight
filesystem built on top of the SPDK blobstore.
Also included in this patch:
1) a shim for using SPDK bdevs as the backing store for
SPDK blobstore/blobfs
2) documentation for using blobfs as the storage engine
with RocksDB
3) scripts for running a set of workloads and collecting
profiling data with RocksDB and blobfs
See doc/blobfs/getting_started.md included in this commit
for more details on blobfs, including some of the current
limitations.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2a6d3d4b87236730051228ed62c0c04e04c42c73
A few instances of DPDK_INC were added after the env library abstraction
was introduced; replace them with the correct ENV_CFLAGS variable
defined by env.mk.
Change-Id: I54ab2b2360a72506049fee549491f6614601a148
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is the initial commit for the "blobstore", a lightweight,
highly parallel, persistent, power-fail safe block allocator.
Documentation will be added in future patches.
Change-Id: I20a4daf899f1215d396f7931c3ec9a2e2bb269d0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
