Change-Id: Icb98e4628962591da32d169853d0ff14400e1e50
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/406922
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At this time all iSCSI tests were using local address
127.0.0.1 for both sides of connection.
This patch changes iSCSI tests to use separate
veth (virtual ethernet) interfaces.
It will allow to actually verify functionality when using
different target and initiator IPs.
Veth are used as most closely resembling real enviroment
in single host and without any network hardware required.
This patch serves as a base for future VPP test changes,
where veth interfaces are used as well.
Note: Netmask changed to /30 temporarily and
verify_iscsi_connection_rpc_methods in rpc_config disabled.
Kernel will route trafic between two veth interfaces through
host stack. This causes target and initiator IPs
to be not as expected. Those are changed back in next patch
by adding namespaces.
Change-Id: Ida8fce107e8262bef94b2161e0197c45f6e3f070
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405552
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
NVML (Non Volatile Memory Library) changed its name to
PMDK (Persistent Memory Development Kit), so make the
necessary changes to the SPDK repository.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id07a87eafb4e9a3099603030c58c0e927bafa608
Reviewed-on: https://review.gerrithub.io/406256
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This moves all iSCSI configuration to common.sh that
should be sourced in each test file.
When particular tests requires different configuration,
it can overwrite those values.
(See ip_migration.sh)
Change-Id: Ia5f684142fb910184809ee7efe74b5a51063b374
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405547
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch leverages bdevperf, which configures
an iscsi initiator bdev to test iSCSI target.
Change-Id: I94c9299ef1f286a13678495d270326f4616c6241
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/404068
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the first step in reorganizing the spdk test heirarchy.
Change-Id: I83467653af2da2a53251649092bed6902d6cb86e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/401707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch is used to test iscsi target with 30 target_node connection.
Each target_node uses one lvol bdev based on lvol store and nvme bdev.
Change-Id: I233ed6a32b417b23f2c01975a6c7fce0f46f22f3
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/389431
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Some upcoming changes will effectively render this moot
anyways by adding an epoll/kqueue descriptor to poll
on in all cases (not just connections that have been
idle for 5ms).
The epoll/kqueue code was just ifdef'd out instead
of removed - some of this code will be useful
and reusable with minimal changes in the upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c354390537e6369cb3c32e78a59c300dec6d098
Reviewed-on: https://review.gerrithub.io/395553
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
iscsi_tgt tests with different header and data
digests configuration.
Change-Id: I6e444eacccebccd66c099ea349be4bdeb063ba67
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/393717
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
1) move iscsi_pmem to nightly
2) move idle_migration to nightly
3) reduce number of malloc bdevs and lvols for iscsi_lvol
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I63fa5a2634c6edb08db16267972fd21c20fd84f4
Reviewed-on: https://review.gerrithub.io/391976
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
ext4test takes ~80 seconds to run, which is a significant portion of the
overall test time for machines running the iSCSI tests.
Change-Id: Id6384fe023f101d4e81bc4ed2da9a53a817d2a02
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391317
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This test ran for 10 minutes, which is half of the allotted time for
the entire nightly test run.
Additionally, we should be testing each bdev backend at the component
level (e.g. via bdevio and bdevperf), rather than trying to add tests
for the whole matrix of front-end app (iscsi_tgt, nvmf_tgt, etc.) with
each bdev backend.
Change-Id: I10311e3e5092084dc939ab8662e8312066ecab6e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391303
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Check the SPDK_TEST_NVMF flag before running the iscsi_tgt + NVMe-oF
host test.
Change-Id: I0d545c98f188edefc089fb79e2879d5d307726f5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/391027
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add test script to use SPDK iscsi with NVML backends and run FIO read/write
traffic with verify flag enabled
Change-Id: I72c95154591034583400116b7c0f05413f35f9ee
Signed-off-by: lgalkax <lukaszx.galka@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/379349
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Test using multiple iscsi target nodes with LUNs backed by
logical volume bdevs
Change-Id: If87ed19dbef84fdc79d5758e063fc11d047e790e
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/378034
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
previously, the tests have been hardcoded to use a manually installed version of ceph.
The attached scripts allow the user to create a ceph cluster from a package managed version
of ceph which requires no extra configuration.
Change-Id: I22e4ea9eb95f1e84a968ee2bce6133568fda33a8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/370399
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I9fbb1dc5a487323af099d08ab466fc811f7be79e
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/366703
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Seeing some intermittent test failures in the test pool related to this
patch.
This reverts commit 8912fc193f.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie81efec005da6b0d1074e8ecc073027b5d7fd7a8
Reviewed-on: https://review.gerrithub.io/366696
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Change-Id: Icc10071d471c9b1063d1d9d3e3f6c5a103a60e48
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/366043
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: John Kariuki <John.K.Kariuki@intel.com>
The stub application will ensure that each
iSCSI test does not need to reinitialized DPDK
memory and NVMe devices. This drastically
cuts down on the amount of time needed to run
all of the iscsi_tgt tests.
While here, add a new common ISCSI_TEST_CORE_MASK
shell variable, eliminating a bunch of copies of
the 0xFFFF core mask, and ensuring the stub application
chooses a core mask that overlaps all of the iscsi_tgt
test cases.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifae73276923258ff64370ae42e19cf1a4a2c2212
Reviewed-on: https://review.gerrithub.io/362454
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This enables iSCSI tests to be more easily run in isolation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4868ca68fe16e06025fd36c62c41ad0694806051
Reviewed-on: https://review.gerrithub.io/361811
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
