This patch creates a test case to simulate nested I/O channels by
generic bdev layer and bdev modules. The nested level of I/O
channels is two at a maximum now but the nested level of the test
case is three.
Besides, any poller registered on the nested I/O channel is not
visible to the upper layer. So include such pollers into the test
case.
By combining thread termination, test the fix for the github issue
is correct.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6a04d753e462cdaba7364678b5118c45b09708ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1390
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI
Set 5 seconds timeout to wait until exiting thread is exited into
spdk_thread_poll(). After the timeout, collect error log and then
move the thread to exited forcefully.
Add necessary unit test case accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ied8f58a2023a3bbe098530810fd3288bef93c3e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1644
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Extract _spdk_thread_exit() from spdk_thread_exit() and
_spdk_thread_poll() calls _spdk_thread_exit() if the thread is in
the exiting state. spdk_thread_exit() changes to move the state to
the exiting state. The spdk_thread_poll() loop will end after the
thread moves to the exited state because the caller of
spdk_thread_poll() will check if the thread is in the exited state,
and break the loop if true.
If the user does not call spdk_thread_exit() explicitly, the reactor
has to terminate all existing threads at its shutdown. In this case,
multiple threads may have some dependency to release I/O channels or
unregister pollers. So the reactor has the large two loops, the first
loop calls spdk_thread_exit() on all threads, the second loop calls
spdk_thread_destroy() if exited or spdk_thread_poll() otherwise for
each thread until all threads are destroyed.
Besides, change the return value of spdk_thread_exit() to return
always 0. Keep it for ABI compatibility. Change ERRLOG to INFOLOG
for _spdk_thread_exit() because it is called repeatedly now. Remove
the check of I/O reference count from _spdk_thread_exit() because
_free_thread() cannot free I/O channel. Refine the unit test
accordingly.
Fixes issue #1288.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iee5fb984a96bfac53110fe991dd994ded31dffa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following patches will require thread termination so that thread_exit()
will move thread to exiting, thread_poll() will move thread from
exiting to exited, thread_is_exited() will detect the threadis exited,
and then call thread_destroy().
So change all places as a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b2e8aee5ed7cd160a88b4c9aaed7d90bd9dac07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1640
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously the caller had to check if thread is not exited when
it calls spdk_thread_exit().
Subsequent patches will change return type of spdk_thread_exit()
to void, and so include the check int spdk_thread_exit() in this
patch.
If spdk_thread_exit() is called when the thread is already exited,
collect INFOLOG and return normally.
This will make the next patch a little easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8b94261575e770485b33c0b37e76e770b77b417c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1639
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
CUnit provides a helper macro CU_ADD_TEST() that
simplifies usage of CU_add_test() function.
Test name no longer needs to be provided,
as it will be inherited from function name.
This is a follow up to
https://review.spdk.io/gerrit/c/spdk/spdk/+/931
Change-Id: I8078f02e08b14f12328ae022d7090ba13fbd64e4
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1239
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch changes the way that unittests initialize.
The new way is shorter and simpler.
It assumes that error during initialization is a fatal error,
but in our cases it always is.
This patch is a followp up to
https://review.spdk.io/gerrit/c/spdk/spdk/+/930
lvol_ut.c is the only test that skipped because
it runs same tests multiple times which is not allowed
by new method.
Change-Id: I0baf7ad09a35d5fca2dc4a03b4453c12c14f38a7
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1238
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Update spdk_thread_poll() to count SPDK thread stats correctly on multiple
SPDK threads per reactor configuration.
spdk_thread_poll() gets start time and reads TSC at end as end time,
and then gets delta between them as run time. Run time is added to idle
time or busy time according to the result of polling.
Reactor overhead is included into the next thread which calls
spdk_thread_poll() now.
spdk_thread_poll() saves the end time to the current thread to use it
as the start time of the next thread.
Unit test framework for this patch and the next patch need to access
thread->tsc_last. In the next patch, reactor will use the end time of
the current thread to the start time of the next thread in reactor_run()
to realize the idea.
Hence add an new API spdk_thread_get_last_tsc(). The corresponding
variable is named as tsc_last and it is good and is aligned with
DPDK (DPDK has used tsc_start and tsc_end as variable name). But
last_tsc will be better as API name because the last TSC value is
easier to understand.
Then add necessary unit test and update the unit test framework.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5e465e9283c032acb427576d0c90f9e1414f2271
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1048
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
When running unittest_thread in fedora29 with memcheck, there is
error "Conditional jump or move depends on uninitialised value(s)"
in for_each_channel_unreg test.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: I38abf4c70ff513e39232b83357d571dded8f02c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add enum spdk_thread_op and two function typedefs spdk_thread_op_fn
and spdk_thread_op_supported_fn.
The first operation type of enum spdk_thread_op is SPDK_THREAD_OP_NEW,
and it is used as an alternative to spdk_new_thread_fn.
Add global variables, g_thread_op_fn and g_thread_op_supported_fn, and
then add spdk_thread_lib_init_ext() to initialize these.
spdk_thread_lib_init() requires both of thread_op_fn and
thread_op_supported_fn are specified or not specified.
spdk_thread_create() calls g_thread_op_fn() with SPDK_THREAD_OP_NEW
if g_new_thread_fn is NULL, g_thread_op_supported_fn is not NULL,
and g_thread_op_supported_fn(SPDK_THREAD_OP_NEW) returns true.
Update unit test to test these addition.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56db903f62437f6ff3198248ffc5dede396c22bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/967
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
The comment in the header file has already said that all associated
I/O channels must be released before calling spdk_thread_exit().
This patch actually checks if it is satisfied in spdk_thread_exit().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56ac50b561c6ca91d3dc2d60c21c8d91d38f081b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/823
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
Change spdk_thread_exit() to return -EBUSY if the thread has any
registered poller. We enforce all pollers including paused poller
are unresitered before the thread is marked as exited.
By this change, a bug was found in reactor_perf test tool. Fix it
by adding spdk_poller_unregister() and add the g_ prefix to avoid
future potential errors.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If7f40357c9a6f4101b3998ea0da3cc46cc435031
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
Change spdk_thread_exit() to return -EINVAL if the thread is already
marked as exited. This will be helpful to detect wrong call sequence
of voluntary thread termination.
Besides, update reactor shutdown and unit test framework shutdown
to incorporate this change accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2296c61e273bf4d9580656dcbc2da0e8a8f3bcf7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/671
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
By the last patch, the asynchronous release of I/O channel will
complete even after spdk_thread_exit() because pending messages will
be reaped.
Then this patch stops new allocation of I/O channel after
spdk_thread_exit().
Hence we will be able to release all I/O channels for exiting
thread within finite time.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I48a45bcba7c4b2c62d8c9d398ac35a584b533627
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
Previously, the exiting thread had discarded all pending mesasges.
We change this to stop accepting any new message in spdk_thread_send_msg()
and reap pending messages in _spdk_msg_queue_run_batch().
Add unit test case for the new behavior. Adding g_ prefix to global
variables for clarification is done together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ida78e7bb1b86357602aea6938dd514897b67edd6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The test case for_each_channel_remove() did not have any
assertion and the count was not incremented correctly.
This patch fixes several issues in for_each_channel_remove()
by counting spdk_get/put_io_channel() and spdk_for_each_channel()
correctly and achieves what we wanted to do in this test case.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iceffd924f8887452bd7dad48e30d121874ab0b05
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Added spdk_poller_(pause|resume) that allow a poller to be paused and
then resumed at a later point. These functions come in handy in cases
when a poller is known to be idle until a certain event occurs.
Change-Id: I7f21c80eb9ac4e8e1cf24d66f99da5687aafe358
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477920
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Lightweight threads may now be exited by calling
spdk_thread_exit() within the thread. The framework
polling the thread can release the resources associated
with that lightweight thread by calling
spdk_thread_destroy().
Change-Id: I6586b9d22556b3874fb113ce5402c6b1f371786e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455319
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This reduces some repeated code. I could have made both paths
call spdk_thread_exit(), but I want to add some stronger checks
around the tls_thread there eventually that wouldn't be valid
in the other path.
Change-Id: I61e1484536d8aef05f120d9ed394312b41f8445a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453575
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Allow users to optionally specify an affinity mask when
creating a thread. This isn't currently used, but we want
the API to be in its final form for the next release.
Change-Id: I7bd05e921ece6d8d5f61775bd14286f6a58f267f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451683
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
mk/spdk.unittest.mk already includes mk/spdk.common.mk, so it's
not needed. This also fixes an issue where touching an included
.mk file would not trigger unit tests to rebuild if they had
this duplicated mk/spdk.common.mk include.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I41a04eb77ce468849cb9b53bd1f76df6fec06e46
Reviewed-on: https://review.gerrithub.io/c/443980
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This name more closely resembles pthread_exit, which is a
closer analogy to how the new threading library works.
Change-Id: I68b04509f3ff8e94b8688804a7e5661155a3ecd1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440597
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This mirrors pthread_create, which works more closely
to the new style where SPDK libraries can spawn their
own threads.
Change-Id: Ic524c4c35bcf7c1611e4f261ebb64b98ac5a5a1b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440596
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Instead of implicitly grabbing the thread from the thread
local variable, make it explicit.
Change-Id: I733fad06181439e12b1e71a4829b84e7b64e2468
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440595
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
These are no longer used by anything.
Change-Id: I0db6bc88e4dc945ff4f64df2ac410e1d00a669c1
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/437601
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Modifed scripts/detect_cc.sh to take additional parameter specifing
the linker to use. Default to LLD on FreeBSD systems.
Change-Id: Idf97e9676a144028c0803d272ae6f0e903b0dd1f
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk.unittest.mk includes spdk.app.mk, but some unit test
Makefiles include both spdk.unittest.mk and spdk.app.mk,
meaning spdk.app.mk gets included twice. Fix that.
This hasn't been an issue because spdk.app.mk currently
only includes variables - but no rules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23d39e8084f79442fb06ae9b5a6a68d6134adff4
Reviewed-on: https://review.gerrithub.io/434281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For tests that aren't specifically testing the thread API,
leverage the ut_multithread framework to simplify them.
Change-Id: Ib772ac4ebd3179b71a51697edc50ad9b7b70536b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/435938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In addition UT were changed to set_thread() before registering
io device.
Change-Id: I959dbc800db9c1f50564274a73d71e05e843d8c9
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/433611
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
No longer override the send_msg implementation.
This updates ut_multithread.c, which has minor ripple
effects into bdev_ut.c. But that unit test is otherwise
unchanged.
Change-Id: I2fd30a1010bdff0a810d376d985ab1b8a2b22fb9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a string name used for debugging only.
Change-Id: I9827f0e6c83be7bc13951c7b5f0951ce6c2a1ece
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424127
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This makes it easier to debug failures.
Change-Id: Ic1099ec08308d5e50dd9fe03798dc0873579f2cc
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/423961
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
thread_ut.c: ensure that the channel context is non-null
util: get rid of a couple of uninitialized value errors.
Change-Id: Idbaad4efea14acd7ae8f98b60aa514e45213a134
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424124
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is the more appropriate location for this test
Change-Id: If556b365975f5658a55924aeb7122186961972bd
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/417365
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
The bdev iscsi initiator had a bug which resulted in
an io_device getting unregistered twice. An error message
got printed but it didn't immediately result in any kind
of failure detected by any tests. Really this should be
considered a fatal error, so add an assert() so it's found
more readily should these kinds of bugs occur again in the
future.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I30df86ba2e6a3559e00f054c7dde14713d6ac80f
Reviewed-on: https://review.gerrithub.io/415375
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This makes more sense as a first class library.
Change-Id: Ibd5c578f8708bd8c7d83fe1629e97c9a3316b56b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/414698
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Madhu Pai <mpai@netapp.com>
