Also, while we are here, consolidate setting SO_SUFFIX to one spot.
Previously, it was possible for a library to slip through
without an SO version.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4db5fa5839502d266c6259892e5719b05134518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
SPDK_ERRLOG() uses spdk_log() procedure which is
customizable and redirectable, so it is preffered over fprintf.
It also prints source location which is useful.
Change-Id: I27574be4a774169f356ebd8dcdfd2a33a057f051
Signed-off-by: Vitaliy Mysak <vitaliy.mysak@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1943
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In practice, the reactor pointers will never be NULL
in these cases, but some static analysis tools don't
realize that.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0657959e5572df2741398b179907f2bbf0b02b3b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1984
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Mellanox Build Bot
This allows us to hide the implementations of
g_subsystems and s_subsystems_deps within the
libraries themselves.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I60716b9465b58d6cdb3a43262a7ded844bd80eda
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1786
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is part of a larger effort to remove the g_subsystems and
g_subsystems_deps variables from the spdk_event map file. The
implementation of those variables should be internal to the
library.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I3c2c04933859c6c484a903e666df10f810b26709
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1785
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We will be create fine name for each poller but it will need large
effort. Replacing spdk_poller_register by the macro SPDK_POLLER_REGISTER
will provide better name than function address with minimum effort.
Following patches may improve function name for clarification.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: If862a274c5879065c3f7cb04dcb5ca7844523e68
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1781
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Community-CI: Broadcom CI
Extract _spdk_thread_exit() from spdk_thread_exit() and
_spdk_thread_poll() calls _spdk_thread_exit() if the thread is in
the exiting state. spdk_thread_exit() changes to move the state to
the exiting state. The spdk_thread_poll() loop will end after the
thread moves to the exited state because the caller of
spdk_thread_poll() will check if the thread is in the exited state,
and break the loop if true.
If the user does not call spdk_thread_exit() explicitly, the reactor
has to terminate all existing threads at its shutdown. In this case,
multiple threads may have some dependency to release I/O channels or
unregister pollers. So the reactor has the large two loops, the first
loop calls spdk_thread_exit() on all threads, the second loop calls
spdk_thread_destroy() if exited or spdk_thread_poll() otherwise for
each thread until all threads are destroyed.
Besides, change the return value of spdk_thread_exit() to return
always 0. Keep it for ABI compatibility. Change ERRLOG to INFOLOG
for _spdk_thread_exit() because it is called repeatedly now. Remove
the check of I/O reference count from _spdk_thread_exit() because
_free_thread() cannot free I/O channel. Refine the unit test
accordingly.
Fixes issue #1288.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Iee5fb984a96bfac53110fe991dd994ded31dffa4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1423
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Following patches will require thread termination so that thread_exit()
will move thread to exiting, thread_poll() will move thread from
exiting to exited, thread_is_exited() will detect the threadis exited,
and then call thread_destroy().
So change all places as a preparation.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I6b2e8aee5ed7cd160a88b4c9aaed7d90bd9dac07
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1640
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously the caller had to check if thread is not exited when
it calls spdk_thread_exit().
Subsequent patches will change return type of spdk_thread_exit()
to void, and so include the check int spdk_thread_exit() in this
patch.
If spdk_thread_exit() is called when the thread is already exited,
collect INFOLOG and return normally.
This will make the next patch a little easier.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I8b94261575e770485b33c0b37e76e770b77b417c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1639
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Following the idea of thread CPU stats, add reactor CPU stats.
Reactor CPU stats accumulates run time of spdk_thread_poll() calls
to idle TSC or busy TSC according to their return codes.
Add necessary unit tests.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Change-Id: I1a1391e79d74387c68f1651a61c8900e4c6faf66
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1501
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
%*s prints at least * characters and may add padding to the string.
%.*s prints at most * characters.
In a few places we used the first instead of the second and
printed some garbage to screen (in the best case...).
Change-Id: I97a862be61a5e43aa61e8230044dbd64a9db33bd
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1569
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Collect elapsed time of each SPDK thread and add it to output of
framework_get_reactors RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9e2f0487de81720327428cda5738284a4ce2c557
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1278
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This patch updates reactor to count thread run time correctly
on multiple SPDK threads per CPU core configuration by using
the refined spdk_thread_poll().
Add tsc_last to struct spdk_reactor to use the end time of the
last thread as the start time of the next thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I21042867885d289ff0c23bf2a9ba6a8076a59673
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This will allow us to keep track of compatibility issues on a
per-library basis.
Change-Id: Ib0c796adb1efe1570212a503ed660bef6f142b6e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add thread_count to struct spdk_reactor to count number of threads
per reactor. This number will be used in the next patch to know
if all threads are idle or not for each reactor to support CPU
power saving.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4f7cc5a6b78d85e9f8d0b539c60058c13e282759
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1169
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
It was too difficult for us to add unit test for _spdk_reactor_run()
because the main polling loop in _spdk_reactor_run() was infinite
if g_reactor_state is SPDK_REACTOR_STATE_RUNNING.
Factor out the main polling loop and rusage update in _spdk_reactor_run()
into a helper function reactor_run().
This improves the code readability as well.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia26db14f44026fefd696443227c16d2be4166832
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1186
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This is a preparation to the next patch which factors out the main
polling loop of _spdk_reactor_run() into a helper function reactor_run().
One of the subsequent patches will support CPU power saving by
adding sleep into reactor_run(). We should not insert sleep between
the main polling loop and getrusage() because now is got before
entering the main polling loop.
To put getrusage() into reactor_run(), we need to maintain last_rusage
in struct spdk_reactor and maintain g_rusage_period as a global
variable. This patch does these changes.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I61bf50de6a170ac73c8fe17e85077b90171dd9c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1185
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add a flag resched to check if reschedule operation is requested
to struct spdk_lw_thread. Add _reactor_resquest_thread_reschedule()
to set the resched flag, and add it to the case SPDK_THREAD_OP_RESCHED
in spdk_reactor_thread_op(), and return true in the case
SPDK_THREAD_OP_RESCHED in spdk_reactor_thread_op_supported().
Then _spdk_reactor_run() checks if the resched flag is true for each
thread. If true, set the resched flag to false, and remove the
thread and call _reactor_schedule_thread(). Add continue to avoid
use-after-free issue for both reschedule and terminate cases.
This idea follows voluntary thread termination and will remove our
worries for all complicated rare cases.
Add unit test case to verify this update.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I656872d32dbb469ae70f771cd0419a77236bfe18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/500
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Remove the prefix "spdk" from spdk_reactor_schedule_thread(), add
spdk_reactor_thread_op() and spdk_reactor_thread_op_supported().
For SPDK_THREAD_OP_NEW, spdk_reactor_thread_op() calls
_reactor_schedule_thread() and spdk_reactor_thread_op_supported()
returns true.
Then replace spdk_thread_lib_init() by spdk_thread_lib_init_ext()
with spdk_reactor_thread_op() and spdk_reactor_thread_op_supported().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I232a3b2c6bcaf4d86b0dd3cefacd3e47eadda6d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If set, SPDK will continue loading the JSON config even if
some commands caused an error. This can be useful when loading
RPC config from spdk_tgt into e.g. bdevperf, which supports
only a subset of RPC commands and would usually fail with
"Method not found" message.
Resolves#840
Change-Id: I070fea862fd99e5882d870e11e6a28dc9d0c8ba6
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/620
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In the reactor main loop, _spdk_reactor_run(), check if both
spdk_thread_is_exited() and spdk_thread_is_idle() return true,
and if they are true, then remove it from the queue and call
spdk_thread_destroy() to delete it.
By previous patches, the exited thread does not accept any
new message or poller, all pending messages are processed, and
all unregistering pollers are completed. Hence we only need to
have very simple check in the reactor main loop.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib678245de98a5c050843e6435026bdcf8b6c75c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/507
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This is a preparation to support voluntary thread termination by
calling spdk_thread_exit().
Change spdk_thread_exit() to return -EINVAL if the thread is already
marked as exited. This will be helpful to detect wrong call sequence
of voluntary thread termination.
Besides, update reactor shutdown and unit test framework shutdown
to incorporate this change accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2296c61e273bf4d9580656dcbc2da0e8a8f3bcf7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/671
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
spdk_reactor_enable_framework_monitor_context_switch and
spdk_reactor_framework_monitor_context_switch_enabled had been
a little long and not easy to get the meaning.
spdk_framework_enable_context_switch_monitor and
spdk_framework_context_switch_monitor_enabled will be a little
more concise, and hence change the names accordingly.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5f1d50e8b62846cbd0f91b94f94cbaf16fefa39b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Following the last patch, this is also a preparation to add
reactor_get_stats RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I18c260bb10bdf1c7aa5e00aa81a171f2ff50c7d5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Following the last patch, this is also a preparation to add
reactor_get_stats RPC.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ia6dc29f591f7112512be8a67b180b056150f467b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478025
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This API will be used in the upcoming reactor_get_stats RPC first.
This API is not public but internal in SPDK. Add necessary unit test
together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I761ffe3c8d6d8da4594c0d728b479f9f40275fc9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478024
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Alexey Marchuk <alexeymar@mellanox.com>
Add check if reactor scheduled the thread to one of the allowed
cores correctly to _schedule_thread().
This check will be useful in the next patch and may be helpful
when we schedule SPDK thread dynamically.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ibea8e8315187ae8a3a421007d8865bbee2d7e037
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478156
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Following the recent effort, use local instance of cpuset instead
of using cpuset pointer and allocating dynamically to it in
spdk_app_start(). This change will avoid potential out of memory
failure for application startup too.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I22b529da13e893db16296167f2d8d4c296dec31f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478580
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
struct spdk_cpuset has been declared in the header file and
so we can allocate struct spdk_cpuset statically. This change will
avoid potential out of memory failure for reactor too.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic5f4fdb493d73b4ae11cddd2638eeb84ebbb792e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478150
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
spdk_thread_poll returns only non-negative value now, and the return
code check is not reasonable now. For just in case we may want to add
assert(rc >= 0) but compiler gives warning because rc is not used anywhere.
So just remove checking return code check here.
We noticed first that spdk_thread_destroy was called without spdk_thread
exit but this change removes spdk_thread_destroy. So the issue is also
fixed together.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4e7f5c09faf5eda68ea8d42320dbefdca88bbd21
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478237
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For now we don't provide #ifdef to users, SPDK_CACHE_LINE_SIZE is defined with 64 bytes.
Change-Id: I8ddb01a382008a3e333967650200c5aa8b93e09e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
This returns true if all registered methods and aliases
are correct. False means that an error like one of the
following occurred:
- duplicate method with same name
- alias specified for non-existant method
- alias specified for another alias
Also plumb this so that incorrect RPCs cause an SPDK
application to exit.
Note: there are cases where this would have been helpful
during the recent RPC renaming.
Fixes issue #940.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I235a433c9b8c01e82f16288a8d295e96c54e4eb1
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472441
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
spdk_reactors_fini() is unconditionally called in spdk_app_fini()
at the end of every application and it currently throws a ton
of warning messages if the reactors weren't initialized yet [1].
Let's silence those warnings.
[1] $ spdk_tgt -c invalid.conf
[...]
*WARNING*: Called spdk_reactor_get() while the g_reactors array was NULL!
*WARNING*: Called spdk_reactor_get() while the g_reactors array was NULL!
*WARNING*: Called spdk_reactor_get() while the g_reactors array was NULL!
*WARNING*: Called spdk_reactor_get() while the g_reactors array was NULL!
*WARNING*: Called spdk_reactor_get() while the g_reactors array was NULL!
(Apparently SPDK_ENV_FOREACH_CORE iterates through 128 cores
if the dpdk env framework wasn't initialized. SPDK calls
spdk_reactor_get() on each core and that's what generates the
warnings)
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: Ic3a2355ef6d2e0d0e1cc125ba21cc6a802b355bc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470736
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In SPDK applications, spdk_app_start() is always followed
by spdk_app_fini(), so remove all global-state cleanup from
app_start() and let it be done by app_fini().
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: Id9fda9fda92f16cc59565691489d4a5ab4c577a5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470735
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Set g_spdk_app.config early in the app init function,
so that the subsequently called spdk_app_fini() will
free it. So far the dynamicaly allocated config object
would be just leaked.
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Change-Id: I19ffc8bc80858d954166649f825e573f83b4bf53
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: Ib9bb2de327a3461081f5f0dfc359b53f61019e28
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468133
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Get all of the important stuff into the first cache line.
Change-Id: I5bbfb031bb1d693019abb9e5145579d0b867eaf5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Originally loading json_config using spdk_app_json_config_load_subsystem()
implied issuing start_subsystem_init RPC. This required a workaround
in the callback of RPC spdk_rpc_start_subsystem_init_cpl(), in order
to skip starting the app in json_config load path.
This made it difficult to load json_config without implicitly using
rest of the event framework. It will be usefull for example in
fio_plugin, which does not use the app.c API.
With change in this patch json_config load path directly calls
spdk_subsystem_init() C call.
Meanwhile start_subsystem_init RPC no longer needs a workaround
for json_config load path.
Change-Id: I535e079339cedaf0950767a8204002ab5885d8a5
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/463978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change adds return code to spdk_subsystem_init().
Making it's caller responsible for handling application
state - such as calling spdk_app_stop().
This change implies that start_subsystem_init RPC does not
stop the application on failure, only reports back the error.
Renamed g_app_start/stop variables to now more relevant
g_subsystem_start/stop.
Change-Id: I66a7da6ecfb234a569c65279cc4b210ddac53d2a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/464412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Begin organizing file so setup operations appear
at the top.
Change-Id: I7411b4bf20480c8aeb40bc21b521e5d359f8da1f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465991
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
There is a case in vhost where this occurs. Until that is
sorted out, just make this a warning.
Change-Id: Id021791e8cbddf3023e0cb1b8c52a733b3578a7d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/466075
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These directories fit in with the module concept we are forming inside
of SPDK. Essentially modules are derivative or specialized libraries that
rely on a general or core library.
Change-Id: Ib40f05422f144ff8fd579f47a3867ef4412b3372
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/465455
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
