For write operations, copy data to req->buf and write
to disk.
If chunk already specified in logical map, read the
chunk first into req->buf, and overwrite with data
specified by the write operation.
If chunk not specified in logical map, fill logical
blocks not specified by the write operation with
zeroes.
For read operations, read chunk into req->buf first,
then copy relevant data into the buffers specified
by the read operations.
These operations are all functional, but have room
for future improvement. For example, this patch
will issue a separate backing read/write operations
for each backing block in the chunk - this could be
optimized to coalesce operations where the backing
blocks are contiguous.
While here, clean up freeing bufspace in one of
the error paths - this needs to be freed using
spdk_dma_free instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6dbf4fc9a8fdf0f5424b1f1f9178c79891c96d0d
Reviewed-on: https://review.gerrithub.io/434116
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Focus of this patch is adding the foundations of manipulating
the chunk_map and backing_block bit arrays and persisting
chunk maps and the logical map to the pm_file.
No data is writting the backing device yet. That will come
in later patches. This also does not rebuild the bit arrays
from the pm_file during spdk_reduce_vol_load - that will also come
in a later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib5336dbe907c253e545704471de8c4e812bbc157
Reviewed-on: https://review.gerrithub.io/434115
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
ziperrno was left over from earlier versions of this
patch set that used "sbzip" instead of "reduce".
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4159141b92727bb0a24db5f9aefcccaadc360d9e
Reviewed-on: https://review.gerrithub.io/436399
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Change-Id: I19bfc17636e0bf36d5a26e18ab2650ea6026f3a0
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/437043
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: Jim Harris <james.r.harris@intel.com>
Same as 29be88f (test/blob: always use SPDK_BS_PAGE_SIZE instead of
PAGE_SIZE), ARM system could not find defination of PAGE_SIZE when
building nvme_ns_ocssd_cmd_ut.c., we use OCSSD_SECTOR_SIZE instead of
Page_SIZE here, also use OCSSD_SECTOR_SIZE instead of "0x1000" for const
uint32_t sector_size.
Change-Id: Ib3062232e44b0be26ade7c64340918f2f23ada03
Signed-off-by: Liang Yan <lyan@suse.com>
Reviewed-on: https://review.gerrithub.io/430802
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
It is the initial patch to add the unit test for
NVMe-oF TCP transport.
Change-Id: Ia8c90a205fc78dd817f91675337ca81021211155
Signed-off-by: Yanbo Zhou <yanbo.zhou@intel.com>
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/426175
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
spdk.unittest.mk includes spdk.app.mk, but some unit test
Makefiles include both spdk.unittest.mk and spdk.app.mk,
meaning spdk.app.mk gets included twice. Fix that.
This hasn't been an issue because spdk.app.mk currently
only includes variables - but no rules.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I23d39e8084f79442fb06ae9b5a6a68d6134adff4
Reviewed-on: https://review.gerrithub.io/434281
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For split SCSI read command, if there is any failure in the sequence of
it, the first error must be propagated to all subtasks of it.
For split SCSI write command, if there is any failure in the sequence
of it, the first error must be propagated to the primary subtask.
Before this patch,
for read task:
- any failure is propagated to already completed subtasks, but
is not propagated to any subtasks not completed yet, and
- if any failure occurs in non-primary subtasks, it is not propagated
to the primary subtask.
for write task:
- if the primary subtask completes after any failure of non-primary
subtasks, the failure will be overwritten by the success of the
primary task.
This patch fixes these issues.
Change-Id: I2d878798cbb40a8c5bd6a6fe5efb32b8de4a8ecd
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436673
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This direct call of LUN reset has caused unexpected behavior
during heavy stress test.
Apply correct LUN reset handling for this case too.
Even if there are multiple LUNs, LUN resets are serialized in
the SCSI layer by previous patches and parallel calls of LUN resets
will not cause any issue.
Change-Id: I920e2864ef0fb41c6bd2b6153ef3caff6876e893
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436115
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Discover commands previously blindly used the nvmf_req->data structure.
This only works if the entire command fits in a single contiguous
buffer. commit 1d9be84bfd changed the default buffer size such that
this would become a problem for as few as 8 subsystems.
Fixes github issue 525
This change may also help prevent data corruption as we were copying up
to nvmf_req->length data into the buffer. For requests with multiple
data buffers this can cause us to copy off the end of that buffer.
Change-Id: I788259da988b2458f57ee2795e1c5d3ced8803dd
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/435544
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch is for ABORT TASK SET and LUN RESET.
iSCSI layer doesn't have pending queue and hence if the target task
is read task and is queued in queued_datain_tasks, it must be
aborted before submitting ABORT TASK to SCSI layer.
Aborting the target task may not complete by an iteration because
submitted read tasks are limited. Hence use poller to complete abortion
by repetition.
Change-Id: Idabf4931d751ee698e9809eafd5c151b979f048b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436077
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By up to the previous patch in the patch series, unexpected behavior
due to write tasks in task management commands have been fixed.
But unexpected behavior due to read tasks in task management commands
have been still observed.
Remaining patches in the patch series will fix the unexpected behavior
due to read tasks in task management commands.
This patch is for ABORT TASK.
ABORT TASK is not supported in SCSI layer yet. But the initiator
doesn't care about the failure is due to not-supported or failure.
It must be avoided that the task management command returns SCSI Good
but some tasks are not aborted and return SCSI Good later. On the other
hand, it is acceptable that the task management command returns
failure but some tasks are partially aborted.
Hence this patch adds operation without checking the support status
in SCSI layer.
iSCSI layer doesn't have pending queue and hence if the target task
is read task and is queued in queued_datain_tasks, it must be
aborted before submitting ABORT TASK to SCSI layer.
Aborting the target task may not complete by an iteration because
submitted read tasks are limited. Hence use poller to complete abortion
by repetition.
Change-Id: I030a8b2f19c2f7c7d2f7b0b2c633579534db631b
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By subsequent patches for iSCSI, spdk_scsi_dev_queue_mgmt_task()
will not be called directly from the function that knows TMF code,
and currently setting TMF code to SCSI task is done in
spdk_scsi_dev_queue_mgmt_task().
Hence after subsequent patches for iSCSI, to hand off TMF code to
SCSI task, any dynamic context will be required.
To avoid the dynamic context, extract setting TMF code from
spdk_scsi_dev_queue_mgmt_task() and put appropriate place for
each call of spdk_scsi_dev_queue_mgmt_task().
Additionally, in spdk_abort_transfer_task_in_task_mgmt_resp(),
ref_task_tag is got from PDU but getting it from SCSI task is
much easier. Hence get ref_task_tag from SCSI task in the callback.
Change-Id: I7add9290598d2df7cfcf1506ec75d74c70c0f236
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/436643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch tests the following:
- Reset task will not complete until prior IO tasks complete.
- IO tasks will suspend until prior reset tasks complete.
Change-Id: I8ae27874e7eb34f866bbd4e057ee5d8c27d040e8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/435433
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
IO submissions to backends have to complete first in LUN reset.
Previous patch makes the waiting time limited.
LUN reset don't use timeout for now because even if LUN reset reports
timeout, error handling of the initiator will be escalated and the
initiator will issue stronger command and will wait eventually
until all outstanding tasks completed.
Besides, not using timeout in LUN reset will make implementation simple.
If timeout becomes necessary, I'll do it in the separate patch later.
Change-Id: Ie9e4502068c19b1727ea65dc773ddf08cedec7c4
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Submission queue deleted by https://review.gerrithub.io/393911
is necessary to support proper LUN reset.
Hence revert the removal in this patch.
And using the submission queue, suspend IO task submission during
LUN reset to limit completion time of LUN reset.
Change-Id: I3cdc4f0165fe845637112c2900407d6b4a09df79
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434765
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Task management functions don't require performance. Serializing
execution of task managment functions will sipmlify and stabilize
the logic and will be helpful for upcoming patches to support
other task management functions.
This patch introduces two queues, pending and submitted queue,
and serializes LUN reset exection and makes LUN hot removal
wait for LUN reset.
Besides, checking if LUN is NULL is moved to the upper layer as
same as IO task submission.
Change-Id: Ia0cf3f437a745ee70fc9b17744cc63c833690dda
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434764
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
As a part of cleanup they're replaced by a device-agnostic
attach API, which is easier for us to manage.
Change-Id: Ia92bd8f4525712bd27ade16ead67435c5e0fbe7a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/436479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
As a part of cleanup they're replaced by a device-agnostic
attach API, which is easier for us to manage.
Change-Id: I7558590e41e5c580a130a6aba7ae4f7dcff58da8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/436478
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Current SPDK SCSI supports only LUN RESET in task management function.
Upcoming patches will support other functions too but differentiate
the callback function about LUN reset from other task management
functions for now to avoid misunderstanding.
Change-Id: If8f00ce413fbcc54b12dd885cbf01597f83a2af9
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434763
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a preparation to the next patch.
Change-Id: Ia7af66ba129a4666730f94be64d3699cded65e09
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434762
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
As described in RFC3720, task management request will act on all
the commands from the same session having a CmdSN lower than the
task management CmdSN.
Current implementation clears all R2T tasks without checking CmdSN.
This patch changes the implementation to clear only R2T tasks
whose CmdSN is smaller than the task management request.
Additionally this patch adds to UT code to verify the change works
as expected.
Change-Id: I0b368cb13741bc05259924d27793438e9250b951
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/434761
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For tests that aren't specifically testing the thread API,
leverage the ut_multithread framework to simplify them.
Change-Id: Ib772ac4ebd3179b71a51697edc50ad9b7b70536b
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/435938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
libpmem only allows passing a size when CREATE flag
is set.
This requires some updates in the unit test stubs
for pmem_map_file as well. While here, do some
additional cleanup and add a g_volatile_pm_buf_len to
track the size of the allocated volatile pm buffer.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib9fe58fd9946161dd20bb8391be2e9680705ab22
Reviewed-on: https://review.gerrithub.io/435945
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Includes tests for the parse_sgl function.
Change-Id: I83a854598c7320b31b75a4fa5ebbfe66cb708b6d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/429070
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be the logical block size presented by the
compressed volume to differ from the backing device's
block size.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie4ef06e131d8e101a0c9ced228c56a02fcbfb7af
Reviewed-on: https://review.gerrithub.io/434113
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I90e7d698cae7577736319e38f089e3b759c9beef
Reviewed-on: https://review.gerrithub.io/435343
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
"trace" is for event tracing. SPDK used to use this
term for logging - we've moved some APIs to use "log"
but more needs to be changed. So start that now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib732c57d01602e56f37e9deed7135840a7c005be
Reviewed-on: https://review.gerrithub.io/435342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
NVMf target can't support extended LBA format for now, so print a
error log for those NVMe backend devices with extended LBA format.
Fix the issue #497.
Change-Id: Idda76ba934dd0eb45f92ae22b0b71398b3ae69dd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/432799
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Considering it's the part base object that's now accessible
in its remove callback, we can simplify the part API by making
it accept the part base object directly.
Change-Id: I87c3278929a063c115828d02e0def7fa536e6682
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/434835
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Unit tests shouldn't link in DPDK env libraries - they
should all use the test_env.c
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib08ae33224ed9a12fa1ff255c4769a005fc10369
Reviewed-on: https://review.gerrithub.io/434259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
For some old Linux Guest kernels, the new NVMe 1.3 feature: shadow
doorbell buffer is not enabled, while here, make a dummy BAR region
inside slave target, when Guest submits a new request, the doorbell
value will be write to the shared memory between Guest and vhost
target, so that the existing vhost target can support both new
Linux Guest kernel(newer than 4.12) and old Guest kernel.
Also, the shared BAR space can be used in future which we can move
ADMIN queue processing into SPDK vhost target, with this feature,
the QEMU driver will become very small and easy for upstreaming.
Change-Id: I9463e9f13421368f43bfe4076facddd119f4552e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/419157
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Initial implmentation had a 1:1 session to crypto op ratio. After
working with a similar concept in CompressDev checked to see if
this was required and apparently it is not.
Saves a decent number of API calls per crypto op and in the poller.
Also saves on mempool usage. Performance improvement measurement
is WIP.
Change-Id: I73f2355e720a16fd46bc4a02657419f779f07cbb
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/433726
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Fiona Trahe <fiona.trahe@intel.com>
This will make future changes to the threading model
easier.
Change-Id: I4abfe0850648a0f7449804066d4a02823393e4a6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/433680
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will make the conversion to the new threading library
easier later on.
Change-Id: Ie7358e89128f28080a986e12cd014de7df4752e4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/433679
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
In addition UT were changed to set_thread() before registering
io device.
Change-Id: I959dbc800db9c1f50564274a73d71e05e843d8c9
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/433611
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A pm file consists of:
* volume metadata
* logical map
* chunk maps
Define all three of these in struct spdk_reduce_vol.
Also define -1ULL to denote an empty entry in the logical
map or a chunk map - and initialize the logical map
and chunk maps entirely with this value when initializing
a new compressed volume.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9aae23c73d2fbbdc72050ab103fe9e686907eb40
Reviewed-on: https://review.gerrithub.io/433490
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently the API requires the caller to open the
pmem file and pass the mapped buffer pointer, length
and pmem flag to libreduce using the spdk_reduce_pm_file
structure.
Let's have the library just do the pmem_map_file() instead.
Users then just pass the path to create the pmem file. The
library will still use the spdk_reduce_pm_file structure
internally - so move its definition out of the public header
and into reduce.c.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I81fcbfdfbb3211dca016d6aa422cf2e1ab16d84d
Reviewed-on: https://review.gerrithub.io/432593
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
It is the first patch to follow the NVMe over fabrics
spec and implmenent the NVMe/TCP transport. It can be
divided into work in the host and target sides:
Host side: Add the TCP/IP transport in nvme lib (lib/nvme).
Target side: Add the TCP/IP transport in nvmf lib (lib/nvmf).
Change-Id: Idc4f93750df676354f6c2ea8ecdb234e3638fd44
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/425191
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently there are no timeout mechanism for Admin commands
when initialization, the NVMe driver may enter infinite loop.
While here, add a new parameter to the controller initialization
options, NVMe controller will report an error when timeout
happens during initialization.
Change-Id: Id0c6b6fa15abe5227b486bee95c8e02914b0d358
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/424622
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Signed-off-by: Piotr Pelplinski <piotr.pelplinski@intel.com>
Change-Id: I36eed5fdd593eb3df15859a3e29c600be0913899
Reviewed-on: https://review.gerrithub.io/432559
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
No longer override the send_msg implementation.
This updates ut_multithread.c, which has minor ripple
effects into bdev_ut.c. But that unit test is otherwise
unchanged.
Change-Id: I2fd30a1010bdff0a810d376d985ab1b8a2b22fb9
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/424262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
