Write operations are not in-place, meaning that once it
is completed, it's chunk and backing io units are freed.
Reads in progress to these backing io units, from other
I/O to the same chunk, could cause data corruption.
Simultaneous writes to the same chunk can cause similar
issues.
There are cases where we can relax this in the future -
for example, overlapped reads to the same chunk poses
no problems. We'll leave that as a future exercise.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3a4d9e8e3ab920f823084cd1bae91f179a4386ff
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448333
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Upcoming changes will require queuing an I/O if it overlaps
with another I/O to the same logical chunk. So split out
code (especially from the writev path) into separate functions,
so that we can execute an spdk_reduce_vol_request object
whether it's just been created via readv/writev, or after
another I/O to the same chunk has been completed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2a216c92e4999313ecc9f7cf157dccd65c9bb30f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
This will help optimize some upcoming patches which
guard against overlapped I/O to the same chunk in the logical
map.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia1370fffd3bf3d55dc9ce88a993ed157ecee272a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448331
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Discovered in bdev compression test. Vol load was using the index
of the logical map to set the allocated chunk map bits as well as
retrieve the chunk. Exposed with overwrite situations. Also clarrified
one var name that I missed in previous patch.
Also added UT that fails without the fix, passes with the fix.
Change-Id: I776a5af9364cc3d4e8b7dafec22acf23bd463630
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447969
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Changed a few cases where var name chunk was used where a better
name would be logical_map_index to avoid confusion with 'chunk'
used as a data pointer.
Change-Id: Ib82a783725cad4609c31bfa8997debb3e71e75b9
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447962
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
_allocate_bit_arrays() needs vol->backing_dev set which was being done
after the call.
Change-Id: Ic8c36c98aee94fbd8230273638011b948cd95675
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443048
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Let the application figure out how to close the
underlying block device after an init fails or
an initialized/loaded volume is closed/destroyed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id0b9b99c85ed13166ec9a229eaaa0b0eb04289fd
Reviewed-on: https://review.gerrithub.io/c/440573
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will remove the metadata from the associated backing
device and delete the pm_file associated with the reduce
volume.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I30ffd68e5ba69b31ee1be85418c5b8c592d82e70
Reviewed-on: https://review.gerrithub.io/c/437995
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This requires fixing up the unit test pmem emulation
code - we need to copy the 'persistent' buffer into
the newly 'mmaped' buffer in the pmem_map_file stub.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4e474f437922e652a57d0b45b6ef92fc713eb587
Reviewed-on: https://review.gerrithub.io/c/437888
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If _allocate_vol_requests() failed, the caller will call
_init_load_cleanup() to free memory that _allocate_vol_requests()
already freed, and cause segment fault. Setting pointer to NULL keeps
_init_load_cleanup() is safe to free it again.
Change-Id: I9ad09eabf6b65350f174bd5a4faf5ee643cbd23f
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/437292
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In effect, this commit fixes error path of spdk_reduce_vol_init()
and spdk_reduce_vol_load(): forget to unmap pmem file after mapped.
Change-Id: I797f15e315fff3ff42c17509a73dc46e7f6bdb24
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/437270
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Replaced divide_round_up() from blobstore.c, lvol.c and reduce.c with
new spdk_divide_round_up() from util.h.
Change-Id: I013383ac286ca52b5c15c7fab4fb40ad97b92656
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.gerrithub.io/437649
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This more closely matches the sequence of events
a user will take in creating a compressed volume.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2311aed49e2a623feb9c5fbdbd25fb3201aeeeb5
Reviewed-on: https://review.gerrithub.io/436065
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was the result of a previous merge conflict.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic657e7f9e16b6a073669b078b4323f7abfef95b9
Reviewed-on: https://review.gerrithub.io/436063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Based on feedback from Paul Luse in some earlier reviews.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1930a3de05ada15d3ac4530c081c2f951b96fe97
Reviewed-on: https://review.gerrithub.io/435368
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For write operations, copy data to req->buf and write
to disk.
If chunk already specified in logical map, read the
chunk first into req->buf, and overwrite with data
specified by the write operation.
If chunk not specified in logical map, fill logical
blocks not specified by the write operation with
zeroes.
For read operations, read chunk into req->buf first,
then copy relevant data into the buffers specified
by the read operations.
These operations are all functional, but have room
for future improvement. For example, this patch
will issue a separate backing read/write operations
for each backing block in the chunk - this could be
optimized to coalesce operations where the backing
blocks are contiguous.
While here, clean up freeing bufspace in one of
the error paths - this needs to be freed using
spdk_dma_free instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6dbf4fc9a8fdf0f5424b1f1f9178c79891c96d0d
Reviewed-on: https://review.gerrithub.io/434116
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Focus of this patch is adding the foundations of manipulating
the chunk_map and backing_block bit arrays and persisting
chunk maps and the logical map to the pm_file.
No data is writting the backing device yet. That will come
in later patches. This also does not rebuild the bit arrays
from the pm_file during spdk_reduce_vol_load - that will also come
in a later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib5336dbe907c253e545704471de8c4e812bbc157
Reviewed-on: https://review.gerrithub.io/434115
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
ziperrno was left over from earlier versions of this
patch set that used "sbzip" instead of "reduce".
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4159141b92727bb0a24db5f9aefcccaadc360d9e
Reviewed-on: https://review.gerrithub.io/436399
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
libpmem only allows passing a size when CREATE flag
is set.
This requires some updates in the unit test stubs
for pmem_map_file as well. While here, do some
additional cleanup and add a g_volatile_pm_buf_len to
track the size of the allocated volatile pm buffer.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib9fe58fd9946161dd20bb8391be2e9680705ab22
Reviewed-on: https://review.gerrithub.io/435945
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is just a wrapper around the pmem_persist/pmem_sync
calls. It basically turns this:
if (vol->pm_file.pm_is_pmem) {
pmem_persist(buf, sizeof(buf));
} else {
pmem_msync(buf, sizeof(buf));
}
into this:
_reduce_persist(vol, buf, sizeof(buf));
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id4e3f1538901cf7a3d5f5cec10b18907ca94afe0
Reviewed-on: https://review.gerrithub.io/434114
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will be the logical block size presented by the
compressed volume to differ from the backing device's
block size.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie4ef06e131d8e101a0c9ced228c56a02fcbfb7af
Reviewed-on: https://review.gerrithub.io/434113
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This can be derived from chunk_size and backing_io_unit_size
in the params, but saving this value explicitly in the vol
structure is helpful so we don't always have to calculate
it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic389afcf60984ea431a6d1c7523005a368547447
Reviewed-on: https://review.gerrithub.io/434112
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each request will need a scratch buffer of size
chunk_size. This is needed for read/modify/write
operations when only part of a chunk is written.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ided33f1e9ae18dd9a5de45f53f0a994a6f260b17
Reviewed-on: https://review.gerrithub.io/434111
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
1) Add #define with comment for the 2-element iov array
2) Account for user passing trailing slash in pm file path
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id5b620ae9d17dd3534e4cc78ddf1ba176f9c7fcd
Reviewed-on: https://review.gerrithub.io/433903
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
These structures will be used as contexts for every
I/O request. Allocate a bunch of these requests
when a volume is initialized or loaded.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibf4da3081b03dd3950550e4ca1c5a3a50f72fd52
Reviewed-on: https://review.gerrithub.io/433516
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch only creates and frees the bit arrays. Later
patches will initialize the bit arrays during load based
on information in the pm file.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id3ba2b27fa7988778df440b3221ce12c80306c66
Reviewed-on: https://review.gerrithub.io/433515
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
These parameters will be needed for a number of reasons
after init/load.
The params struct contains the uuid, so the explicit uuid
member in spdk_reduce_vol is no longer needed.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ide12a7816e4a236be5c73a5733e76919ad9af103
Reviewed-on: https://review.gerrithub.io/433512
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A pm file consists of:
* volume metadata
* logical map
* chunk maps
Define all three of these in struct spdk_reduce_vol.
Also define -1ULL to denote an empty entry in the logical
map or a chunk map - and initialize the logical map
and chunk maps entirely with this value when initializing
a new compressed volume.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9aae23c73d2fbbdc72050ab103fe9e686907eb40
Reviewed-on: https://review.gerrithub.io/433490
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We will need the extra iov in the upcoming load path,
so we can load the superblock and pmem file path into
separate buffers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I99cce0172bd772ca93813a002dcce6943e661f35
Reviewed-on: https://review.gerrithub.io/433087
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently the API requires the caller to open the
pmem file and pass the mapped buffer pointer, length
and pmem flag to libreduce using the spdk_reduce_pm_file
structure.
Let's have the library just do the pmem_map_file() instead.
Users then just pass the path to create the pmem file. The
library will still use the spdk_reduce_pm_file structure
internally - so move its definition out of the public header
and into reduce.c.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I81fcbfdfbb3211dca016d6aa422cf2e1ab16d84d
Reviewed-on: https://review.gerrithub.io/432593
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Write pm filepath first to offset 4K. Then write
the super block to offset 0. This ensures the backing
device isn't really valid until both are written
(avoiding the case where the super block got written
but not the path.)
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I55508aa67b4179e658827c982cd955d009a3f321
Reviewed-on: https://review.gerrithub.io/432505
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <spdk-ci.pdl@broadcom.com>
While here, add basic implementations for these function ptrs
in the unit tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I54e18a3b331777602fed29382b95b449005efcce
Reviewed-on: https://review.gerrithub.io/432503
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add the following to struct spdk_reduce_pm_file:
* path of the pm file
* pointer to the mmapped pm region
* whether the mmaped address is pmem or not
Now use pmem_persist or pmem_msync to persist volume
parameters. Note that we do *not* persist the pm filename
to the pm file - the pm filename will be written to the
backing disk in a later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1d873ae086dc20600798a49b98e1bf490ac750f3
Reviewed-on: https://review.gerrithub.io/430648
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
--with-reduce required to build reduce. This depends on
libpmem being installed.
We still need to work out details in pkgdep.sh and
vm_setup.sh. Some distributions like Ubuntu still
require configuring extra package repositories to
get libpmem packages.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I4e056ce1da9a1fecb4458f8f5e7ff5d61c422533
Reviewed-on: https://review.gerrithub.io/430646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A compressed volume will require both a persistent
memory region/file for per-chunk metadata and a
backing device to store the compressed blocks.
Add functions here to calculate the sizes of these
based on the desired size of the compressed volume,
its chunk size and the size of each backing block.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9203479e2a268c3ab0e2b0e06e348285e9d1cd13
Reviewed-on: https://review.gerrithub.io/430387
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
reduce will be a block compression algorithm designed
specifically for SPDK. It is called "reduce" because
it reduces the data size on disk.
This patch just adds the shell of a library, include
files and unit tests. This will be fleshed out in
the rest of the patches in this series.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I88e238af64142a7c0e50ab7b447280026b55581f
Reviewed-on: https://review.gerrithub.io/430386
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
