--wait-for-rpc can be used instead.
This parameter will eventually become obsolete,
so let's remove the short version. It will be
exclusively used for "workload" in perf apps.
Change-Id: Ib4b7001d0e756349b05788278c894d622bc89790
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/421863
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
These changes were modified by the shfmt tool that supports Google's Style guide.
Change-Id: I27dd8ba91afc0043b3ce5f0eb6121a3c11789fab
Signed-off-by: chenlo2x <longx.o.chen@intel.com>
Reviewed-on: https://review.gerrithub.io/408147
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
fio.sh still uses conf file because hot remove is not yet imlemented
in rpc calls
Change-Id: If9066e6b24e1e3d381876909fb9e00000a302e02
Signed-off-by: Pawel Niedzwiecki <pawelx.niedzwiecki@intel.com>
Reviewed-on: https://review.gerrithub.io/419125
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for NVMe bdev.
Signed-off-by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib9a0475d735af2616a3005d04530ca825ece8a52
Reviewed-on: https://review.gerrithub.io/416546
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This test may timeout (if one is set) on systems
with large physical NVMe drives. Creating the filesystem
takes just too long and causes fails.
Change-Id: I961e56085ef5735d189c31bcba3f2a203dc366d2
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/420207
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In iscsi_tgt tests, when error is caught by trap command, temporary
files are not deleted. By this patch, delete temporary files in trap
handlers.
Change-Id: I317a102db346b345c3d25a4977528c737b861748
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/419311
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By the following change, delete bdev operation will wait until all
related iSCSI connections exit.
scsi: Don't free IO channel at LUN removal not by allocator
Hence delete bdev must be called after iscsicleanup in test code.
The following patch tried to do that. However nightly test code was
missed to change.
test/iscsi: Change the order of delete_bdev that hides uncorrect
hotplug implementation.
This patch fixes the failure of nightly test. By this patch passing
iSCSI nightly test was verified.
Change-Id: Ia3ac234db6d569212de9234b7201b132236b5993
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/417376
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since delete_bdev should be used only for debug purpose,
this patch adds delete call specific for error injection bdev.
Changes in tests and spdkcli done accordingly.
Change-Id: I7f0be09cfed582c4d1060871e40c41eff5af7129
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/415502
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I58b53634fea07db219b20ee5b74cf31e708279a1
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405548
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This moves all iSCSI configuration to common.sh that
should be sourced in each test file.
When particular tests requires different configuration,
it can overwrite those values.
(See ip_migration.sh)
Change-Id: Ia5f684142fb910184809ee7efe74b5a51063b374
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405547
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This makes it clear and common among all iSCSI scripts
what ISCSI_PORT is refers to.
Change-Id: I01924179fb304b9cd111c39ff1b07aa3427d2c0c
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/405544
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I428d1be7db33efc1a44fa3f703ca154179fad2c0
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/403441
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This is the first step in reorganizing the spdk test heirarchy.
Change-Id: I83467653af2da2a53251649092bed6902d6cb86e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/401707
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is a TODO from long ago. Complete this while adjusting dump()
and construct() format of target.
Besides names of variables and parameters about CHAP are not unified
between JSON-RPC and SPDK internal. JSON-RPC's wording looks better
and adjust SPDK internal to JSON-RPC.
Change-Id: I89bcd1ce13a11f7d63a62d51ef094dd302186d37
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/400201
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
In the accessibility control of iSCSI target, "ALL" is used to allow
ANY IP address-port pair or iSCSI name of initiators. However iSCSI
targets cannot know ALL initiators beforehand.
Hence "ANY" will be better than "ALL" and will avoid misunderstanding.
Comments and iscsi_tgt test code are also changed and UT code is added.
Change-Id: Id004d819df6e9ee89f6c1db2e4b4c149be062733
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/385168
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
RPC is a default feature required for almost all usages,
so enable RPC by default, but with a UNIX domain socket
for security reasons.
-r can now be used from the command line to specify
an alternative RPC listen address from the default
/var/tmp/spdk.sock.
Remove the Enable parameter from the Rpc config section
but still allow specifying an alternative listen address
using the Listen parameter as an alternative to the
command line option. This keeps backward compatibility
for this release for anyone using the configuration file
still.
Remove the Rpc sections from all configuration files
that were using them, except for those that specified
alternate TCP ports for multi-process test cases. We
can fix these later to use an alternate UNIX domain
socket and to use the command line instead.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ife0d03fcab638c67b659f1eb85348ddc2b55c4c4
Reviewed-on: https://review.gerrithub.io/386561
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Always use "Local7" internally. We want the log API
to be generic instead of syslog specific.
Change-Id: I021f719e90c236f123fa1cadebc0c199b87ba077
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/365295
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Copy the DPDK submodule and re-run configure so that ext4test works
regardless of whether the autotest agent is using the submodule or the
hard-coded /usr/local/share/dpdk path.
This reverts commit f21448cf (test/iscsi: do not rsync dpdk directory
for ext4test) since the DPDK submodule is now needed to build.
Change-Id: Ib08c19bf7a6c3cbb450a4f613168bdab529ba9aa
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/363460
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch make sure the mkfs command only run for 1 time for all
the devices.
Change-Id: Ic2fce52580d0ff871c77f56fce60ec5ca79e513c
Signed-off-by: cunyinch <cunyin.chang@intel.com>
Reviewed-on: https://review.gerrithub.io/361907
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I76b442115caa5e9320ded671be6bc54a6a98a2b4
Reviewed-on: https://review.gerrithub.io/362451
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test sets DPDK_DIR to the main repository so does not build
DPDK on the mounted iSCSI LUN. So don't bother copying the
dpdk subdirectory to the iSCSI LUN which saves a few seconds
for every test run.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ieb04f94b7955acbafb283638531ad076afbf2302
Reviewed-on: https://review.gerrithub.io/362268
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Core dumps stop working if the path is longer than 64 bytes.
Use readlink to shorten some of the very long relative paths.
Change-Id: I5e7eb6580ca581c5ac3a71afb7b62953836e2660
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This patch removes comments within configuration files for tests
that are not relevant to the test itself.
It reduces the need to update comments in test config files with each update.
As well it makes those same as other test configuration files.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I48116613435fadf0738b5a948d32f458c7ce06be
All devices must be specified by BDF. Add support for scripts
to use lspci to grab the available NVMe device BDFs for the
current machine.
Change-Id: I4a53b335e3d516629f050ae1b2ab7aff8dd7f568
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
These were only intended for testing and should be replaced by a virtual
blockdev that can be layered on top of any kind of bdev.
Change-Id: I3ba2cc94630a6c6748d96e3401fee05aaabe20e0
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows this test script to be used with different
iSCSI target binaries, as well as optionally turning off
configuration of an NVMe-based target node.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id6841e71d7842117756346cfd0fe1853a1ea5c6a
Mounting with sync to do more IO during test.
Print dev stats after umounting.
Do not change directory to mounted system, as this is preventing cleanup
trap to umount used path in case of failure.
Change-Id: I2f444b67b1f293c9d7c939f8f94aa5756e20aa26
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This test will create a malloc and NVMe iSCSI target node,
perform an iSCSI login, create and mount a filesystem, then
copy the SPDK contents to the mount and do a build.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I00291e6ca768dd4b685086cf1479098558b9329f
