Use the len field from the generic spdk_bdev_io instead of duplicating
it in blockdev_rbd_io.
Change-Id: I3ebfab8dd1303add83bc2206fc87319ba7d605b3
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This function needs to check for SGEs that straddle a
2MB page boundary, and ensure it does not return
a length that will cross that boundary.
This cannot happen in practice currently with SPDK
since all buffers are allocated using rte_malloc(),
but an upcoming vhost-scsi target may produce
SGEs from a guest VM's physical memory that span
a 2MB boundary.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8b83c7c39c4cf33815abb22ff2ebc90941b21e28
No functional change, but removes a few assumptions
that will be invalid in a future patch that fixes a
bug in this function. Primarily we no longer assume
that this function will always increment the
iovpos and reset iov_offset to 0.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I770f2f24c37626063e113af850a2af792aed332a
The bdev function table should not be part of the public API.
Change-Id: I5d6f40d1b37c4471041c1c9d6253a3f92e9e9701
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
It was written but never read (and the I/O channel is already stored in
the generic spdk_bdev_io).
Change-Id: Id33392e9d3940b2c1439e9fed2553aa091ecedf8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
No need to duplicate the bdev-defined I/O type.
Change-Id: I15cb68c3c68b3f25b286b04500b53081ed5e7881
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The status field in blockdev_rbd_io was only used within
blockdev_rbd_io_poll(), so replace it with a local variable.
Change-Id: I3629225f28b752a3acc7521699c33bc98f1e4b7b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Instead of the next_sge callback returning the physical address
directly, make it return the virtual address and convert to physical
address inside the NVMe library.
This is necessary for NVMe over Fabrics host support, since the RDMA
userspace API requires virtual addresses rather than physical addresses.
It is also more consistent with the normal non-SGL NVMe functions that
already take virtual addresses.
Change-Id: I79a7af64ead987535f6bf3057b2b22aef3171c5b
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove the complex list management for pool_name and just strdup() it
directly. It is not worth the trouble to save a few bytes.
Change-Id: I8a4f7eeea619bd824ea593854423e317041c540e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Remove a DPDK dependency from generic code.
Change-Id: I8e3e2c0a36d980b426a1967ed1f88fb8b855c382
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Custom bdev modules can return any SCSI status and SCSI sense
information to a host by this patch. This is usefull when a custome bdev
module detect an error in the module and need to return meaningful
information to a host.
Make a wrapper that spdk can call a function without thread affinity, and
call this wrapper to open rbd image.
Change-Id: Iadc87a948f43632abf497f88165483a0e269ba54
spdk_nvme_probe() will now provide a struct spdk_nvme_probe_info to the
probe and attach callbacks in place of the PCI device pointer.
This struct contains the useful information that could be retrieved from
the PCI device during probe.
The goal of this change is to allow expansion of the probe information
in the future when other transports (specifically, NVMe over Fabrics)
are added that do not necessarily use PCI addressing or device IDs.
Change-Id: I59a2a9e874e248ce5fa1d7f4b57c8056962ff3cd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add a helper function that converts a PCI address from a string into a
struct spdk_pci_addr and use it in place of the various sscanf()
invocations throughout SPDK.
Change-Id: Id2749723f76db741567e01b4bcb0fffb0e425fcd
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Add an RPC interface to list all blockdevs and their properties.
Change-Id: I50db730d5eff8cffcbe8fe5df6b3461457e8581e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
The PCI device claim function does not need the whole spdk_pci_device
structure, just the address.
Change-Id: If59df512043ee062cf9f759bdc104fc522625ba8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
- Split the part that gets a PCI device's address into its own function,
spdk_pci_device_get_addr(). This is useful outside of the comparison
function and is orthogonal to comparing addresses.
- Make the comparison function take two addresses instead of a device
and an address. The more general form will be useful with addresses
that are not directly associated with a device. Because of this, also
rename the function from spdk_pci_device_compare_addr() to
spdk_pci_addr_compare().
- Return a signed value similar to strcmp() so that addresses can be
ordered, not just compared for equality.
Change-Id: Idf304454af09ea57f1e1d5dc3a39b077378cecad
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Rename the construct_rbd_bdev "size" parameter to block_size so that it
is consistent with other bdev construct RPCs.
Change-Id: I88f8ed35444495ffce9550dc224fbcbd58231787
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
When creating a bdev via the RPC interface, there was no way to know
what name it was assigned (other than predicting it based on the
numbering scheme). Change all of the relevant RPC interfaces to return
an array of bdev names so they can be used to construct LUNs/subsystems
dynamically in scripts.
Change-Id: I8e03349bdc81afd3d69247396a20df5fcf050f40
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
A status member of spdk_bdev_io structure is set after the if block.
Therefore a status parameter should be checked instead of a status
member.
Change-Id: I4030a7fcdb36d9c589802ec5b4e424591dc2a3b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Previously, we directly assigned the pointer of pool_name
and rbd_name, and this is not safe. After the rpc test,
we found the string value is not correct, so use strdup.
Change-Id: Ibadc57d3cb5b9869b7db5a22c2459769e92edebd
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Four read/write functions share the same code for checking
IO len and offset. Extract this code into separate function.
Change-Id: I40f0021e70a60c591b048ad3a70b22eaa07af3b4
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Only call spdk_bdev_io_complete() where IO error is seen.
Change-Id: I829e4c589dbcb47017e810035837a4c61c3428f9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
This patch enables vector operation for bdev drivers aio, malloc and
nvme.
The rbd driver still handle only one vector.
Change-Id: Ie2c1f6853bfd54ebd8039df9a0305854ca3297b9
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Make sure the function reentrant, prepare for rpc method.
Change-Id: Ie5230e4ac6c9a750e8e779c5e0b67134729c07e3
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This prepares for future scatter-gather support.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie21c4d86c1e932dcaf63cf13d7a7198890595d79
Return void in main I/O path, and have functions
explicitly complete the I/O back to the bdev layer
if any failures are encountered.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia729b0af555f87c2fb36b92e79a47d19a325de7a
Add public function which could be used by rpc method.
Change-Id: Id9d2938801e0acdf0f9827ef2990a54c75aec22a
Signed-off-by: Cunyin Chang <cunyin.chang@intel.com>
This patch removes the lock in RBD module. And it requires
the librbd library supports rbd_poll_io_events function.
Change-Id: I040a7d8369ab4f69f41d1d0233115f885168f019
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Remove #includes for all DPDK headers that weren't
necessary.
Change-Id: Ib02522e0f04e64a1c98afceb7508cc0e8d931a9d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This converts some, but not all, usage of rte_mempool
to spdk_mempool. The remaining rte_mempools use features
we elected not to expose through spdk_mempool such as
constructors, so that will need to be revisited.
Change-Id: I6528809a864ab466b8d19431789bf0f976b648b6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Use the env library to perform all memory allocations
that previously called DPDK directly.
Change-Id: I6d33e85bde99796e0c85277d6d4880521c34f10d
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Enforce exactly one trailing \n, and fix all of the existing cases.
Change-Id: I6218e4700e90aeb647eaee78089530c79993c8c8
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This patch enables vector operation for bdev drivers aio, malloc and
nvme.
The rbd driver still handle only one vector.
Change-Id: I5f401527c2717011ecc21116363bbb722e804112
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Validate the number of unmap descriptors in the generic bdev layer
before calling the blockdev-specific unmap function.
Change-Id: Ib24e7ec63f782f23f2ee3e63393aa8463123fdb4
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
This allows users to swap their PCI library from
libpciaccess/dpdk to another mechanism using the standard
method for swapping out the env library.
Change-Id: Ib2248f8b43754a540de2ec01897e571f0302b667
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
This allows users to swap out SPDK's third party
libraries for an implementation based on their own
framework.
Change-Id: Ia0b7384ce5e31acba5ad0d7002dec9e95b759c52
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
