Script was written in such a way that tests would be
performed starting with all found NVMe disks in configuration.
Then the number of disks for the workload would be reduced in
loop until reaching 1. This is the scenario used in test
case 1, described in SPDK NVMe Performance Benchmark document.
--disk-no allowed to avoid running test in loop, and specify
just a single value for the number of disks to be tested.
Both loop logic and --disk-no are no longer required as
tests are scheduled and run via CI system which picks the
parameters for each test run.
Change-Id: Iad0f4d0d259ac64680fd5bb69d7cbb7e0afff79c
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3295
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
- Change divisor in nsec to usec calculation to "1000".
- Ignore MIX param when rw mode is set to 100% read or
100% write.
- Use MIX param as number in 0.0-1.0 range for calculating
summary read+write latency.
- Use jq "//" alternative operator when querying for fields
which might not exist in JSON object. Assume "0" for
non-existent fields, otherwise jq reports "null", which
in turn results in script errors.
Change-Id: Ibc8f91f058d9ae31ee1b60f4b253c42b743ae22f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3294
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previous changes moved some of the fio CLI parameters into
a bash heredoc to save into a text file, but it was put in
wrong place in the script.
Move global fio parameters a couple lines up so that the
resulting fio config file has the correct form of:
[global]
global_params
[testjob]
testjob_params
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I3a958fe5ce880ab63a079c345e6b24fd1d3bae32
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3293
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Due to the firmware response time for REVERT action, currently
we only enable this test with P4510 drives.
Change-Id: I4b02008ec0b7d2caeba20c566b1cf1b69404ae12
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2816
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch adds waitforblk() after rebinding the driver.
If timing was unfortunate, it was possible to issue
id-ctrlr command to a device that was not yet ready.
Meaning the support for fw command was not read properly.
No error was reported due to "set +e", so this patch moves
it till after id-ctrlr.
Example of the error:
# get_nvme_ctrlr_from_bdf 0000:82:00.0
# readlink -f /sys/class/nvme/nvme9
# grep 0000:82:00.0/nvme/nvme
# bdf_sysfs_path=/sys/devices/pci0000:80/0000:80:03.0/0000:82:00.0/nvme/nvme9
# [[ -z /sys/devices/pci0000:80/0000:80:03.0/0000:82:00.0/nvme/nvme9 ]]
# basename /sys/devices/pci0000:80/0000:80:03.0/0000:82:00.0/nvme/nvme9
# printf '%s\n' nvme9
# nvme_name=nvme9
# [[ -z nvme9 ]]
# set +e
# ctrlr=/dev/nvme9
# ns=/dev/nvme9n1
# /usr/local/src/nvme-cli/nvme id-ctrl /dev/nvme9
# grep oacs
# cut -d: -f2
/dev/nvme9: Resource temporarily unavailable
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5728a5062cd553eb39d18d9869fdf56319a27777
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2950
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
NVMe tests compiled the nvme-cli, but turns out that
NVMe-oF did not. This patch moves compilation to
common script. Meanwhile next one will use it in other tests.
Additionally return to the original directories with
pushd & popd.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ica60775a9b8e4347bed28d4c9dfae1acab2cae9f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2969
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There are a lot of files in the nvme-cli repo on system that
either build up (*.core) or produce misleading logs (*.gcda).
This patch cleans the nvme-cli repository before compiling.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8f169b9eaef2dc91b14b324a63b338611f82a6a5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2949
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tests do not work on OS other than Linux, instead of
going through whole script - exit early with error.
Took this chance to move staring the stub, till after
nvme-cli compilation succeeds.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5659888527bc2c25ab10bd871f7820b13f02e3fc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2947
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
We aren't going to run into any runtime issues when
linking against static libs, but we will when linking
against shared objects, so always test against shared
objects in autotest.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I2d3d6e90f5fa4c38b3f44cf35e24b4f7e43b60ba
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2980
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This gets us ready for the case where we want to run with
shared objects.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I84d22cf9def30a27aeb11fcf18eb80080a002ef9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3021
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Use 512B block size when running nvme_namespace_revert
routine. Need to use this block size because of
vhost_boot.sh test case.
Fixes#1452
Change-Id: I5f41cf2bf9d63b811849a99de6cba9b7b5a1d97d
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/3003
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The old version of this test was using a function
that only detects NVMe drives bound to the kernel
driver so it was not finding any work to do.
Instead use identify to find NVMe namespaces.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I937fc364254a926b8d251ec0cb38ea026593d977
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2788
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In case when no device supporting Namespace Managment was found,
the test case exits without producing an error.
For example QEMU NVMe emulated device does not support it, thus
only physical devices have to be used right now.
This goes against design of "run_test" function, that when executed
should always run and never silently skip.
This patch adds check whether there is a device support and triggers
the test case only then.
Note that original code for selecting the device is still in original
script. This is to enable running nvme_ns_manage_cuse.sh on its own.
Right now CUSE tests are only enabled on VMs so nvme_ns_manage_cuse,
was added to exception list.
This will soon be reverted as the tests are moved to job that
runs on physical machines.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie784696c2628b5fe45ce751b3978abcc03118cd9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2828
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Added more comments for clarity.
Moved namespace size calculation to the clean_up() function.
Changed size calculation from nvmcap (id-ns) to tnvmcap (id-ctrlr).
There is noneed to cache the size before deleting namespace,
if we assume that all devices had single namespace encompassing the
whole device.
Changed blocksize from 512 to 4k. All devices in CI should support that,
and usually thats the default.
This could be further improved by reading LBAF and checking the Relative
Performance (RP), but that would convolute the test scripts. This
is good enough.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I8a38d00ae1442edf5480e4e72a8a8aa90380cd79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2827
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
It is already assumed that enviroment was prepared,
setup.sh ran binding the drives.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I864590b57db880b33c7b32deba8d38e4d5637b5b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2825
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is used couple times in cuse test, so move it to common script.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1e9f973e7fb53b0024fb320d37632e1e011ba3e9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2824
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
This will help with managing the test execution and preparation.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0bd3612381d031a4015335d162f1296fd6dd213d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2823
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
"nvme_cuse" name for run_test was already used by one
of the tests in nvme.sh.
This removes the naming conflict and will prepare for further
restructure of nvme-cuse tests, where "nvme_cuse" name will
encompass all cuse tests.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If141fe0ef492e0cde8e68490550de5d48fecb5e7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2822
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This will help us to change the host identifier if required, moreover,
some drives sometimes report set host identifier failed when startup,
so set host identifier at runtime making more sense.
Change-Id: I939c059d890b06aa2d51e82e0dede9630a6a1b51
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2860
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: wanghailiang <hailiangx.e.wang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This makes them easier to find. They are now named
spdk_nvme and spdk_bdev.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I1f6736d8f7f5b9669583731fb0b710ba54f0d50a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2679
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Automatically place binaries produced from the app directory
into build/bin. This matches with the output in build/lib
that already exists.
Change-Id: I13cd2da71d2f88592e22308fe8a907bf458458b5
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2379
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We will skip the test case if the drive didn't report such
capability, this isn't treated as an error case.
For vagrant environment, the namespace size is set to 1GiB or
2GiB, so here we also change the test LBA start from 0.
Also use printf instead of fprintf for normal exit.
Change-Id: Ib9f845ae548452921564aafebd2b23da6310b071
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2768
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We used to create them at runtime with QEMU monitor, but
they can be created just once at startup. While here, start
using loops in bash to create/modify 4 equal drives.
Change-Id: Ie73ba3496a1cfb5d5a173118d331d90eee713270
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2144
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This cuts down even 10 seconds. We only need a few binaries and spdk
./scripts directory on the VM, not all SPDK sources.
Change-Id: If63bdaec9ee4cf3f42ab7fce1bf107847580dbf7
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2145
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There were many cases in the past where discover_bdevs()
is the first app to parse given (invalid) config and silently
fail without even printing the exact error. That's because
the spdk app that's started inside that function has &>/dev/null.
discover_bdevs() is currently used only in nvme perf scripts,
so move it there. It should be probably simplified there,
but the priority for now - and the purpose of this patch - is to
remove it from autotest_common.sh so that no one is tempted to use it.
Change-Id: I1d5840dde9272cdaa1ff282022c6ec29a297df50
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1554
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
If Namespace Change AER is not supported by controller we
need to reset controller after changing namespace configuration.
Change-Id: I640e925fa02881c7b8541f2c0353e78c51074cdc
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1912
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This test creates/deletes namespaces with Namespace Manage commands
and checks if appropriate NVMe CUSE device nodes are created/removed.
Change-Id: Iecbb4949c3843e41d4dbf365b0a57de3362c8947
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1131
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This test changes the range of active namespaces and checks
if apropriate CUSE devices for namespaces was stopped/started
properly on CUSE update.
Change-Id: I9683a0ab6ff28328d4788c49a834cef31c0582cc
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/780
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Always print QEMU's output to the screen - there's not a lot
of it and something may come useful. Let's know what's happening.
The text-based QEMU monitor always runs in an interactive mode,
so post-process its output a bit:
$ monitor_cmd info status
QEMU 5.0.0 monitor - type 'help' for more information
(qemu) info status
VM status: running
(qemu)
Clean it up by removing the first line, then filter out any
lines prefixed with "(qemu) ".
Change-Id: I20b56bbdfc868bc11468dea5ef246cf1db1b4ab8
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2143
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This test was after the part in the nvme.sh script where
we kill the stub. So the call to get_nvme_bdfs was invariably
returning nothing.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: Ice98cca8878ccff06057da5f96607eccffc5da39
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2746
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will help us to capture the error case in CI.
Change-Id: I4ff348e492d6acd18ff4552b9a233965db5a1019
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2734
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This only covered one test case for NVMe reservation feature, so remove
it to test directory.
Change-Id: I7920679ce14dd4d6a9164cb7663016bc7a3a4929
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2732
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
current_queue_depth should have been incremented only if I/O submission
succeeded.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ib26b42b0ab195eba7536b2403a31d42305d77433
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2585
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Previous to this change it was possible to register
same nvme_io_msg_producer twice. This kind of functionality does
not make sense in current scope of it, as each message to/from
io_msg_producer does not have identifier other than this pointer.
In case of nvme_cuse this allowed creation of multiple /dev/spdk/nvme*
devices and caused an infinite loop when detaching an nvme controller.
This patch disallows that and adds test for nvme_cuse.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I5f56548d1bce878417323c12909d6970416d2020
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1938
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Instead of refering to single controller, allow to point
and check different ones.
Next patch in series will verify lack of existance
of "/dev/spdk/nvme1".
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9656ac06e86c8946b45b2ffc93119d31a1ccc5ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1979
Community-CI: Mellanox Build Bot
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Unregistering nvme_cuse when the device did not exist
resulted in SEGFAULT within nvme_io_msg_ctrlr_unregister().
To prevent that, when no nvme_cuse is registered for the
ctrlr do not unregister nvme_io_msg_producer.
RPC and spdk_nvme_cuse_unregister() now return an error.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Id77cebe23ff91023a24cfe091f5f62a76a9175fd
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1921
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Couple of nvme_cuse RPC operations were done as part of
nvme-cli test cases. This patch moves those out to separate
script.
Next patches in series will expand those.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia3123939901368af3570b127230f828437f39ef6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1920
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
${nvme_name} refers to device name when bound to
kernel nvme driver. One of the checks modified by this patch
would return true for case when original device name was anything
other than "/dev/nvme0". Any higher number id would not exist
in /dev/spdk path anyway.
Meanwhile devices under /dev/spdk are created in order
by the SPDK, so we are sure they will start from 0.
This test only registers single nvme_cuse device so that would
be the only one.
So this patch replaces ${nvme_name} with hardcoded
value of ctrlr="/dev/spdk/nvme0" as this is always the outcome
of this test.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I521ebe68685234774e8b94175553c8c8609c0bd1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1919
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
perf/common.sh uses autotest's common tooling which depends on this
variable to be set. Without it, execution of the run_perf.sh simply
fails.
Change-Id: Ib68d565b1d38c80df3d3f1a09f5fa7bef6eaaffd
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1290
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The specification says when PRACT is 1 and metadata size is 8, the
controller generates and appends protection information to the end
of the logical block data, this looks like only valid for extended
LBA format, but from real test with different drives, for separate
metadata case, some drives require host allocated buffer while some
not, for metadata bigger than 8 bytes cases, they all need host
buffer, so we allocate this buffer in host for all cases here.
Change-Id: I1aca8eb84e089ff5819a5f2680409c193847c40b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1391
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
There's no reason not to publish those. Especially if
they're needed in other public headers.
Change-Id: I7dfc6922fcc0dfc46822ad8a16a375f997b98e84
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Do not use iter_pci_class_code function in tests to
iterate over NVMe drives. This function can return
drives which at the moment of execution can not be
whitelisted for use.
This can result in test errors (such as simply
bdev_nvme_attach_controller RPC command failing) or
even using and deleting data from NVMe drive which
was not meant to be used in tests.
Fixes#1235
Change-Id: I82b9935fc88605b636c2096be6c71d4880a567c8
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1309
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The hardcoded path is replaced with $CONFIG_FIO_SOURCE_DIR as defined
during the compile time.
Additionally, all checks which determine if fio is available are now
based on $CONFIG_FIO_PLUGIN=y knob instead of the presence of the fio
repo.
Change-Id: Ie469747f3863c9561f53d32e8c3f29778afaaf74
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1108
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We do not want to skip tests, especially that the
'if' statement is inside the test script.
So even though the test wasn't actually ran it still
is reported as executed because "spdk_nvme_cli.sh" returned
with rc=0.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I89c553aebcc1346f8f584dd86eeae1ca146e7340
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/980
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
MD022 Headers should be surrounded by blank lines
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I768324b00fc684c254aff6a85b93d9aed7a0cee5
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/656
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch introduces tests for basic RPC commands not used in
other tests:
bdev_nvme_apply_firmware
Change-Id: I3a7aff1720108548b03d581fa7664d1ff5498be5
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/533
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If stub terminates right after execution, e.g. due to lack of system
resources (requested number of cpu cores to run on, right amount of
memory, etc.) start_stub() would end up blocking forever since there
wouldn't be any entity around that would mknod spdk_stub0 for it to
break the loop.
Avoid the above scenario by checking if $stubpid is still visible
under procfs and return if it goes missing.
To make sure kill_stub() is still called to clean up after start_stub()
declare proper trap prior the call to start_stub().
Additionally, avoid potential stderr noise in case kill|wait are told
to act on a PID that's not visible in the ns anymore.
Change-Id: Ief41200c57957f84b4f96a54baabc8da1f27dd43
Signed-off-by: Michal Berger <michallinuxstuff@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/482653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When firmware upload is not supported, fw-log may return
random data.
This patch compares an output of fw-log only if oacs.firmware
is set.
Change-Id: I74d7766ca6ebdf0a94f200a35e6215ed44ef1062
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/481670
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch compares an output of nvme-cli for NVMe Linux
driver with SPDK NVMe CUSE implementation.
Some commands may fail or provide different outputs:
1. smart-log -- data may change,
2. list-ns, list-ctrl, get-feature -- depends on spec
version of device (unknown or reserved field for spec 1.0),
3. fw-log -- may return random data for fws if firmware upload
is not supported -- this case is removed now and will be
added in next patch
Change-Id: I47873f004efbe333e1de02010ba594baf253d093
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476170
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Group all kernel conditionals for various ioengines in
one if block.
Change-Id: I14f736c1ab8fce13effeb9ec06731b3d14859941
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479818
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Part of results_dir variable was unnecesarily repeated.
Change-Id: I282e1f7389f79aeccf44b09f257ef33842be517b
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Allow running tests with nvme/perf. This will be needed
for comparison with bdevperf and/or fio nvme plugin.
Change-Id: Ie351d1b3c9d8eae430161779f9818c04d87e6ed7
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Previously it only ran on single core.
Change-Id: I1eb16c56cb733bc327b9e1ab7a63ae8ada3cda68
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Try to pass most of fio configuration file parameters via
configuration file instead of using double dash command line
arguments.
This improves readibility of script and makes fio config file
more useful if it's archived after finished test run.
Change-Id: I0b718a98dc8b5096dc0c15a87c8ed1a4b64251a3
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479819
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Move executable lines from common.sh body into a function.
Otherwise these are run when file is sourced.
Leaving getopts as only executable in common.sh, this can
be fixed later and does not cause problems now.
Change-Id: Iddbfd9aff5cd006cf3afb579f627f3463663ea6a
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479816
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Move all related steps to common.sh/preconditioning() function
so that everything is in one place.
Change-Id: I253a185a5c16e9ba31c84aa945f6c3033f80d53f
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479815
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This variable was hidden as lowercase var at the
very end file while in fact it's used as global in the
main script.
Change-Id: I68d53d953a63a3f53a3129f1817c7108a38da4bc
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479814
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reorganize help message and variables by grouping related
parameters together. Makes it easier to read.
Change-Id: I7d9f44d7cdfebefcaf7a1395a3aafb8b29fd6345
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479813
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This new api function will enable us to work with custom transports.
This is needed to enable properly parsing and comparing custom transport
IDs that may all resolve to the same enum value.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I26aa3cb8f76f8273f564799d9b2af8041ea0d219
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478752
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Correct shellcheck rule SC2045: Iterating over ls output is fragile. Use globs.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I436878774d6f86c23b1c5cf5220da297053f03e2
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477397
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This also requires us to change the create_test_list function to rely on
the run_test function for creating the canonical test list.
Change-Id: Ib35e7752935a3ac83de2702b6dfbd42539027f6a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476962
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reset core mask is 0x1 and stub core mask is 0xF.
Avoid to use core 0 both apps.
Fixes issue #1134.
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: Ic423ec03896e38cf748929e458922f73dd2a7241
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/479771
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We will be able to distinguish case and suite in the post process
scripts based on if they have any internal tests.
Change-Id: Iff2aa5caa251924d8a842085d87eb2a17aca45d4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
Issue reports:
return: can only `return' from a function or sourced script.
Use "exit 1" instead, and ignore changes to json.power_on_time.hours.
Issue link: https://github.com/spdk/spdk/issues/1111
This is to fix issue #1111
Signed-off-by: dongx.yi <dongx.yi@intel.com>
Change-Id: I90198e8237cb587fbeb7777f6b2da783fd15ba04
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/478014
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The shell_Restore_x variable and xtrace_restore were attempting to
accomplish the exact same thing. However, when assigning
shell_restore_x, if -x was not set, then the assignment would result in
an error causing the scripts to fail.
So just get rid of that variable entirely and replace it with the more
robust xtrace_disable, xtrace_restore mechanism.
Change-Id: Ic823ad8433bd3dc181aaa0930297cd9d74bcf528
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/477966
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: SPDK CI Jenkins <sys_sgci@intel.com>
This unifies the script and makes it easy to see what exactly we are
testing.
Change-Id: Icdbc08077ea4397bfde50493c718f99c3c499062
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476809
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
And clean out the corresponding calls to timing_enter and timing_exit
from the various test scripts.
Change-Id: I0759417b5a529e4c3649ce04cca1799c089da278
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476804
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
This patch removes posibility to set cuse device path. Instead
"/dev/spdk/nvme*" path is used.
Change-Id: I7c3087772a3661eebe03fce21356c35cc8204b49
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/474598
Community-CI: Broadcom SPDK FC-NVMe CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Make sure that all setting files under /sys/block/nvme*
have time to get created properly.
Change-Id: I9e3bf973fc09d2f5c38be3b29aa1fea4137c0402
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476557
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch uses lowlevel fuse functions to process messages to
eliminate the need to use signals to interrupt blocking read
operation in fuse_session_loop().
Fixes#1032
Change-Id: Ie9c9ea76cc135c383f5757864aa2d84ac9eb3da3
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/473233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
For errors that we do want to ignore, use || true after the commands.
This allows crashes in the background target application to fail
the tests.
Change-Id: I1fcd711c17ad0a956b6778260b2db8c0b801584f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475156
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Just sending TERM signal to the background process doesn't
provide an information about the condition of terminated
process.
To catch failures in the background process killprocess
helper should be used to wait for its termination and
check error.
Change-Id: I294d4493cf69883aa481eb6f5e55b46ea4940c5c
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/475017
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The startup tool needs more than 1s to finish in FreeBSD
OS. So disable this test for FreeBSD.
Change-Id: Ibd59cb7d8ed4e27b5df5171888676be9bc37fa8a
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/472660
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds new script to verify CUSE functionality for NVMe
devices:
1) Starts spdk_tgt application
2) Attaches first found controller
3) Enables NVMe cuse devices for a controller and namespaces
4) Retrieves CUSE device names for controller and namespaces
4) Tests operations on exposed namespace devices
5) Tests operations on controller devices
NOTE: These tests requires at least one NVMe device with at least one
namespace available.
Change-Id: I5f5a7c86f8aefa73f12f4727f7520f16a599985b
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468828
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The startup tool is used to verify nvme device startup
time.
Change-Id: I2bee729c154175e1bda94c8e410d997bdc9a6eff
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/470001
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Variable was used as an array but is now assigned a string.
Change-Id: I79e59d80be96657a9c2fc66f9d205458f9db67b2
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/468366
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
