Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia89ca218681144147eb196cdec67b6e6c19a97b4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8546
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I220efe860e12338da14534267a77c6521f3ce91d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8391
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This breaks the flow of EXIT traps that use this function together
with errexit. Consider:
set -e
trap 'killprocess $pid_not_found; nvmftestfini' EXIT
...
if killprocess() suddenly exits the remaining parts of the trap won't
be executed.
Also, if the process is not found, allow killprocess() to return
success - if it's gone then the main goal of the function is already
achieved. If the process terminated abruptly errexit should pick that
up regardless.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I93c00c2a2da5457affb2ed2b5bf0ebae9c4bf291
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10853
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We should gather the core regardless of the RLIMIT_CORE setting.
Also, don't limit number of parallel executions of the collector
in case more than 2 processes crashed (unlikely to happen anyway,
but just in case make sure we cover it). Lastly, wait a bit longer
for the potential cores.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ic7de8f8000676122282469b729f45b235ab6f9ca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Upon removal, there's a small chance that new threads would jump into
these cgroups AFTER we read the list of PIDs to migrate. In such a
case, there may be some processes left preventing us from finally
removing the cgroup. Since we can't fully control that without
continuously reading the list, simply ignore it.
Fixes issue #2298
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I0d50b975742a8b15edd25c6b4e51ab337b017eaa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10872
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <smatsumoto@nvidia.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
f6ab6c09e3 changed the glob pattern for building the rpms[] list
in the way that it now includes all the *.rpms. This breaks the test
against the native dpdk since it picks up the .rpms created by the
previous tests - this causes rpm -i to fail since packages with
conflicting contents are being installed.
To mitigate, purge all rpm packages after each test is completed.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I9516956f241936b2be400740ce6758594092ebc9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10899
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When we find the corresponding nvmf_fio cases in the log,
we won't be confused.
Change-Id: If37372d287b0ac70142234a4e29208a38d027fbd
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10680
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We encountered a coredump in running accel_perf with only one
ioat/idxd device enabled:
accel_perf: accel_engine.c:973: accel_engine_create_cb:
Assertion `accel_ch->engine_ch != NULL' failed.
Aborted (core dumped)
In identify_accel_engine_usage, we try to get an accel channel,
read capabilities of it, and free it. However, the hw destory_cb
is not yet called before running _init_thread because the hw destroy_cb
is delayed by accel_engine_destroy_cb, which is already a delayed
event itself. So, we simply check the first available channel's
capabilities in _init_thread to avoid such partial-free error.
Signed-off-by: Wenliang Wang <wangwenliang.1995@bytedance.com>
Change-Id: I96ae0408568ed6cd2cb9b74fde406a821943616e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10426
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
By default, this timeout waiting for response is set to 60 seconds,
we want to wait a bit longer than defined RUNTIME value.
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I6f91da6c3996967271dda7c49320a2b8573bc49f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10169
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch modifies documentation page to explain
changes introduced in the previous patch.
Change-Id: If95250004bf8642c941a32a8805e437d6f6c5004
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10501
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Let user pass a name of tracepoint group. Currently the only way to
enable traces with '-e' option is to pass the tpoint mask, which is
cumbersome. This patch modifies our API to accept strings as parameters.
Example:
-e nvmf_tcp:2,thread
enables nvmf_tcp's second tracepoint and the whole thread tpoint group.
Modified spdk_trace_enable_tpoint_group() - it will be also used in
the changed form later in the series to accept tpoint mask when using
RPCs to activate/deactivate traces.
Change-Id: I6b02363cce3b44b0b578877bc2505f5a4e2fffdd
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10818
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make trace_create_tpoint_group_mask() an external function.
This is going to be used in following patch.
Change-Id: I06cd1652bb30abddd49536bc76ec134a01121537
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10830
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This -o parameter is required. I think -s 4096 is a very old version.
Now the definition is different.
Change-Id: I0e12fae51a2f092d0896c95e0c128754b430354e
Signed-off-by: wanghailiangx <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10820
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
we don't remove the socket fd from socket group when
nvmf_tcp_poll_group_add() return error, and when
closing the socket there is an assertion.
This was found via llvm_nvme_fuzz via TCP transport.
Change-Id: Ib4ab6fc3fc5e2bc6a9545f6ce854bae8f1157fd5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10849
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When doing ADMIN fuzz tests, the NVME_OPC_FABRIC is special for
fabric transports, so here we pick up a different one.
Change-Id: I00376c08eb9eabdb109656d631615eeb37c9d09c
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10847
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: Ib696c7787151e4898b63f57749bd134333e94a23
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10413
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Signed-off-by: Jun Wen <junx.wen@intel.com>
Change-Id: Ib18e8c3971da53f91de5352eaa476b4acd0ce4db
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10377
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add test script for launching VMs with vfio-user transport,
this test script not active until vfio-user capable qemu available,
new flag SPDK_TEST_VFIOUSER_QEMU will decide case whether to run.
Change-Id: I9b885cec797fe3bb28860f1ec436c31a6fa2f131
Signed-off-by: Mao Jiang <maox.jiang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10096
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If blobs held in a blobstore are opened a lot, lookup
by RB_TREE will be much more efficient.
Change-Id: I7075b95c597a958e7bb10890f803191309532021
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10917
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Replace total_busy/idle_tsc by current ones for
decision making when tuning frequency.
Change-Id: I89524a9febfa963b14c3120433e5aff9de2a28dd
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10342
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Dong Yi <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We recently improved qpair disconnect process and added assert
if we get a completion without any error when a qpair is disconnected.
However unexpectedly we saw this case very often when we ran the test
test/nvmf/host/multipath.sh for the real hardware in the test pool.
So we remove the assert and change the ERRLOG to INFOLOG.
Fixes one of the issues in #2300
Signed-off-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
Change-Id: Iedbf7e0afa5025da6a810043ba95348ba5b856b3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10901
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We have very frequent failures when we run test/nvmf/host/multipath.sh
in the test pool.
Call stack showed nvmf_stop_listen_disconnect_qpairs() accessed
qpair->ctrlr even if qpair->ctrlr was NULL.
nvmf_stop_listen_disconnect_qpairs() did not check if qpair->ctrlr is
not NULL before accessing qpair->ctrlr->subsys.
When a qpair is added to a poll group, qpair->ctrlr is cleared to NULL.
The test code test/nvmf/host/multipath.sh executes multiple
reconnects for path error.
So a conflict might occur between adding a qpair to a poll group and
disconnecting a qpair in a poll group.
In this case, it may be acceptable even if we disconnect a qpair whose
qpair->ctrlr is NULL. It will be better than SIGSEGV.
Fixes one of the issues in #2300
Signed-off-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
Change-Id: I308fcb886dd410d01e3361c1850dec9a8eacbccf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10860
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If qpair creation failed, ctrlr_ch remains in group->ctrlr_ch_list
but memory for ctrlr_ch is freed. Next attempt to get ctrlr's io
channel will modify data in already freed memory and may corrupt
another allocation.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I85002f2e6ac86a0ffda6dabfa57e79b59074fb5a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10840
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It is possible that the application calls
get_io_channel during nvme controller reset.
In that case IO qpair won't be created and the
application will get a NULL pointer.
It is possible to repeat get_io_channel later but
there is no such indiciation for the application,
so it can't distinguish between a real failure and
"try again" case during controller reset.
This patch ignores IO qpair creation error if
controller is resetting. IO qpair will be created
when reset completes.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Id39202f5a6878453ff54e35df91d5dc49a5f046a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10828
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If nvme ctrlr is resetting or initializing, free_io_qids
bitmap is already freed or not created yet. In that case
an attempt to create IO qpair leads to segmentation fault.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I6a97bf81d5a568db20d23b3f88cf01e994ba42e3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
https://review.spdk.io/gerrit/c/spdk/spdk/+/10016 renamed this
function to print_bottom_message() and this particular instance
was left behind.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I422dfb317c6c5b8c2ce60b580fb92556c306040b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10837
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In current implementation RDMA qpair is destroyed right after
disconnect. That is not graceful qpair shutdown process since
there can be requests submitted to HW and we may receive
completions for already destroyed/freed qpair.
To avoid this, only disconnect qpair in ctrlr_disconnect_qpair
transport callback, all other resources will be released in
ctrlr_delete_io_qpair cb.
This patch is useful when nvme poll groups are used since in
that case we use shared CQ, if the disconnected qpair has WRs
submitted to HW then qpair's destruction will be deferred to
poll group.
When nvme poll groups are not used, this patch doesn't change
anything, in that case destruction flow is still ungraceful.
However since CQ is destroyed immediately after qpair,
we shouldn't receive any requests which point to released
resources. A correct solution for non-poll group case
requires async diconnect API which may lead to significant
rework.
There is a bug when Soft Roce is used - we may receive
a completion with "normal" status when qpair is already
disconnected and all nvme requests are aborted. Added
a workaround for it.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I0680d9ef9aaa8737d7a6d1454cd70a384bb8efac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10327
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Shuhei Matsumoto <shuheimatsumoto@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These definitions will be used in the next patch to check if
device is rxe
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: Icc073344103991ff24fc3bb88a1ceb9867de6f6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10727
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Rename print_bottom_error_message() to pint_bottom_message().
This is to avoid confusion, beacuse in the next patch this funciton
is used to print messages unrelated to errors.
Additionally added clearing bottom before printing given message.
Change-Id: Ibaeea03bb92124098fee51f78a6ac773eb288897
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10016
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch aims to introduce a change in enabling
tracepoints inside SPDK. Currently every hit tracepoint will
be stored inside an internal buffer, what is inconvenient when
looking for certain information (eg. starting IO to record
some tracepoints, stopping the IO and having the tracepoint
buffer flooded with irrelevant information before copying the
contents connected with IO operations).
The tpoint mask option (-e) has been extended with ':' character.
User may now enter tpoint mask for individual trace points
inside chosen tpoint group.
Example: "-e 0x20:3f", where "0x20" stands for tpoint group,
':' is a separator and "3f" is the tpoint mask.
Change-Id: I2a700aa5a75a6abb409376e8f5c44d5501629877
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10431
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Some devices may support SRQ depth lower than defaulut
value 4096
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Change-Id: I58da0ac268a6d4c4a7e3b500ae37b8fad4810e17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10654
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
USE_DEFAULT_DIRS can be used together with GEN_SPEC to not hardcode
our custom paths into the .spec and instead use default set of dirs -
this should allow users to not define custom dir macros for their
own rpmbuild instances and simply run the build against the .spec:
$ GEN_SPEC=yes USE_DEFAULT_DIRS=yes ./rpmbuild/rpm.sh > foo.spec
# .. prepare source ...
$ rpmbuild -ba foo.spec
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ia50ac303dfe9090fbd424e63e9eee7d939415ac2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8390
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: If7c2d2b4b09bb05ee42f78e01ef4c68a0810d2cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8388
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: <tomasz.rochumski@intel.com>
Otherwise, the test using this application will succeed, even if no test
is actually executed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib2235795ea51985d418c2be6904a68db15aa593a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10772
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Set the maximum admin queue size to 256 to make sure it can hold the
number of admin requests required by the abort application.
This patch fixes the following error and actually allows the test to
start:
ctrlr.c: 720:_nvmf_ctrlr_connect: *ERROR*: Invalid SQSIZE for admin queue 135 (min 1, max 127)
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I4042481ffb2792381ef2e4ad295be067a610bd7e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10771
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Otherwise, this field is left unassigned and the host receives some
garbage cid.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: If1e1fe8c7543bcedfbb897200696e05b71c57e0c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10770
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When aborting a request in a NEED_BUFFER state, we set it's completion
status and remove it from the pending_buf_queue. Since it's no longer
on that queue and there's no completion it's waiting for, we need to
manually kick.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I1272d441aec3b3090cd8c143a2112a8a6866fcf0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10769
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Change-Id: I126039482b5c9e3caba6565b067c747203dea476
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10822
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Also name the fuzzer test case with `fuzz_admin` prefix
for ADMIN commands.
Change-Id: I6e5eeb71a5f795fee8afba034f3ad436220e3c20
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10815
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We already uses vfio-user instead.
Change-Id: Ic565554cc124fe34304c3f9dbadbf01723ddf900
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10634
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Two cgroups are created prior running the scheduler tests:
- /cpuset/spdk
- /cpuset/all
/cpuset/spdk is the cgroup dedicated for the tests, i.e., the SPDK
processes executed along the way. The resources consist of the cpus
that are initially picked up by isolate_cores.sh.
/cpuset/all is the "dummy" cgroup that holds most of the remaining
processes that run on the target system - "most" since not every
process (especially kernel threads) can be migrated between cgroups.
This cgroup's resources include all the online cpus except those
selected for the /cpuset/spdk.
This should allow for lowering the noise on the target SPDK's cpus
and make sure that load on each cpu is generated exclusively by the
SPDK.
Fixes issue #1950
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ic45149f55052ff03bead0b9bea086f95c87ea75d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10584
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
These functions are meant to help in isolating processes to make sure
SPDK is exclusively run on the dedicated cpus.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Ie7575ce4ef68c48f6f63dbedace34f23fdb8441c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10583
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The tracepoint passes qpair pointer as an argument, while not specifying
it in its definitions, which makes the following assertion to fail:
trace.c:83: _spdk_trace_record: Assertion `0 && "Unexpected number of tracepoint arguments"' failed.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I315e9bf0465db7033ac0f1169536c459ac4e9250
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10761
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Move drawing contents of thread pop-up to a separate function.
This will be used in the next patch, where drawing will be moved
inside a while loop to refresh changing values.
Change-Id: I1c18dbe09d828da60357d9ce195226bc09033597
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/10760
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
