qpair structure is freed and an error code is returned to the caller in the case of failed qpair initialization in function spdk_nvmf_rdma_qpair_initialize (e.g. bad return value of rdma_create_qp).
The return code is handled by nvmf_tgt_poll_group_add function which destroys the qpair for the second time.
This patch fixes#857
Change-Id: I0773652ecccbbd634ad272106e0a93c1e591d7d2
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462011
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Lorne Li <lorneli@163.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Func spdk_nvmf_rdma_destroy_defunct_qpair is a "last chance option"
to destroy qp manually if some driver/hardware doesn't drain qp's
failed wr as expected.
There's a probability that ibv_poll_cq polls wr of the destoryed qp
after spdk_nvmf_rdma_destroy_defunct_qpair's execution. Although in
practice the risk of this situation is minimal(if not non-existent),
add a log here so that we could detect this situation easily.
Change-Id: Ifa9534397513bcea34c18fbb8168eef8f53599c1
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462441
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Currently rqpair will be destroyed directly in ibv_poll_cq path
if it has been drained, regardless of whether there are outstanding
I/Os issued to bdev layer. So after outstanding I/Os completing,
spdk_nvmf_rdma_close_qpair will be called from nvmf layer, accessing
a destroyed qp.
This path defers qp destruction in nvmf_rdma_destroy_drained_qpair
func until nvmf layer closes qp.
Fixes 851
Change-Id: I8bcce66f8053ddb105702ac603d5d73af54bdcfc
Signed-off-by: lorneli <lorneli@163.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461237
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
move the staement location of TCP request setting and remove
the duplicated code.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia659756185547ff4f8aa26c5bc01f63defe6c113
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462589
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This priority is used to differentiate the sock priority on the TCP connections
between NVMe-oF TCP target and other TCP based applications.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I6ee294e647420b56d1d91a07c2e37bf34ce24e03
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461801
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: I5bcac50baca785255eb068086e67c07d120b042f
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459432
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
spdk_dma_*malloc() is about to be deprecated.
Change-Id: Ic42db528bbae4b3ca2e91cb9ac46def99ecb5f28
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459431
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
No need to have it under lock. Additionally in case of failure
there was a lack of rdma_destroy_id(). This is addresed within this
change as well.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Idbb36d51ad4ef7ef81051463f56efc87ef00c966
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462054
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case of failure during pd or map allocation freeing list of devices
was missing.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: If62f7b072f3894fd1a7e856c19b4ea51646dd20e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/462079
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case of pd allocation by nvmf hooks there is a lack of null
check as oposed to pd allocation by ibv_alloc_pd.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: Iead6e0332bdee3da4adb6e657af298215c4e2196
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461576
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch adds statistics for BDEV IO pending state in NVMf subsytem
which may help to detect lack of resources and configure pool size
correctly.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I6c60c27efe3efed194b2d2c46a707af7c2808fe9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445290
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch adds number of admin and IO queue pairs per poll group in
NVMf statistics. It can be useful to troubleshoot load sharing issues.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I2a9c0fc99cf5d0729eb130d30540ae52b5207fc9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch adds nvmf_get_stats RPC method and basic infrastructure to
report NVMf global and per poll group statistics in JSON format.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I13b83e28b75a02bc1dcb7b95cbce52ae10ff0f7b
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452298
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Now that the resume path can correctly handle the case where a namespace
was removed and a new one added with the same nsid, this no longer needs
to be asynchronous.
Change-Id: I693045e66a7d4e75255b526d8f5ca5ef8695533e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459606
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Set DIF context of the corresponding request to PDU when
- processing in-capsule data of the command,
- processing data of C2H PDU, or
- processing data of H2C PDU.
Change-Id: I3a668a55be21dbe2ee6ecf26476290670bd7b4a8
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458929
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
When NVMe/TCP initiator transfers in-capsule data, NVMe/TCP has to
process it as in-capsule data. If DIF insert/strip is enabled,
in-capsule data size will be increased by NVMe/TCP target to insert
metadata. However size of in-capsule data buffer had not been
increased, and buffer overflow occurred when NVMe/TCP initiator
transfers in-capsule data to NVMe/TCP target with DIF insert/strip
being enabled.
This patch increases size of in-capsule data buffer size to store
metadata. 16 byte metadata per 512 byte data block is the current
maximum ratio of metadata per block.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I88b127efd7a945bde167a95df19a0b9175cb8cd0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461333
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
We updated readv_offset before generating DIF to avoid adding
the temporary variable _rc in the previous patch, but that caused
write error when inserting DIF.
Fix the bug in this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id0788280a83cbea2554c851db77751432fc00cba
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461116
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
When handling the capsule command header, call spdk_nvmf_request_get_dif_ctx
by passing the NVMf request and the reference to the DIF context, and set
the flag dif_insert_or_strip of the NVMf/TCP request to true.
spdk_nvmf_request_get_dif_ctx returns false immediately when the
corresponding NVMf controller disables DIF insert/strip.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I16f6b322f2692d5f9653d011a490e7929ec37365
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458928
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
When the NVMf controller's flag dif_insert_or_strip is enabled, DIF is
inserted for write I/O and stripped for read I/O, and the corresponding
NVMe-oF initiator should not be aware of the DIF setting of the
backend bdev.
Hence this patch hides the DIF setting of the backend bdev
when the flag dif_insert_or_strip is enabled.
Change-Id: I3c14880c2e94cba7f76b1bca78afb36bfe884e26
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456731
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The first idea was that the caller of spdk_nvmf_request_get_dif_ctx()
should check if the current transport enables DIF insert/strip before
calling spdk_nvmf_request_get_dif_ctx().
But NVMf controller knows if DIF/insert/strip is enabled now by the
previous patch. Hence spdk_nvmf_request_get_dif_ctx() checks if the NVMf
controller enables DIF insert/strip at its head.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I78253d356b694800c3a9a9608514df58e0c631a6
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461314
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Add a flag dif_insert_or_strip to struct spdk_nvmf_ctrlr that indicates
whether DIF insert/strip is done.
Copy the DIF insert/strip setting of the corresponding transport options
to the flag at NVMf controller creation.
The purpose of this patch is to make DIF insert/strip not per-transport
option but per-controller option because we may want to be able to
control DIF insert/strip per controller at some point. Besides this patch
will clean the implementation.
Besides align indent around the change.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I57f65960b430e55f4021ed514aacd85581ff9993
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/461313
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This patch is used to do the following work:
1 It is optimized for NVMe/TCP transport. If the qpair's
socket has same NAPI_ID, then the qpair will be handled
by the same polling group.
2. We add a new connection scheduling strategy, named as
ConnectionScheduler in the configuration file. It will be
used to input different scheduler according to the customers'
input.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ifc9246eece0da69bdd39fd63bfdefff18be64132
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454550
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add the optimal poll group get function.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ia9e57c6924a6563d79269cf535814883e83698cd
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454549
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
By capturing this pointer onto the stack, we inform the compiler
that we don't expect it to change. That allows the compiler to
generate more efficient code.
Change-Id: I0f3ff9373662198e915269c4498e4902a2cdb808
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459754
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
This signals to the compiler and analysis programs that this
won't change during iteration, so it may produce better code.
Change-Id: I478c0c9445d4ddf8a69ab1b3deaf628b82a0eaea
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459753
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
This is a place holder and subsequent patches will use the option
dif_insert_or_strip and provide JSON RPCs to configure it.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I7e3fbb1d49c47647a9a0a1a2149152801591b283
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456452
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add a helper function to get DIF context when the passed NVMf request
is for I/O queue, NVMe read, write, or compare command, and its NSID
is valid.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I796c20607c7b64a8be85da5131c5ea95ffd9f8e4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458713
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add a helper function to get necessary DIF information and set
them into the passed DIF context and return. This function will
be called only when the specific requirement is satisfied and
the caller will be added in the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic435886ca936a211f34278b813f547ffa43b9000
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458712
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
When DIF is inserted or stripped,
- in the TCP transport layer, we can use LBA based length throughout, but
- in the NVMf controller layer and BDEV layer, extended LBA based
length must be used, and NVMf controller gets the length from
tcp_req->req.length.
Hence by adding and using two variables, elba_length and orig_length
to struct spdk_nvmf_tcp_req, set the extended LBA length to
tcp_req->req.length before calling spdk_nvmf_request_exec(), and then
restore the original LBA based length to tcp_req->req.length after
calling spdk_nvmf_tcp_req_complete().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9309b8923c6386644c4fd8ef3ee83a19f5d21ce5
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458926
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
If tcp_req->dif_insert_or_strip, increase the length from LBA based
to extended LBA based by using its own DIF context.
Change-Id: Ie9f5cf757328dda795b43a7b6c70a72259865115
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458925
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The next patch will extend the length from LBA based to extended
LBA based and use it as buffer length to insert or strip DIF.
So cache sgl.unkeyed.length at the top of spdk_nvmf_tcp_req_parse_sgl
and use it throughout.
Besides, one unrelated change-the-line to improve the readability
is included.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2a1dc9379bb5671ec80b5b478504c9879a4f0fff
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458924
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Generate and insert DIF to each data block when reading more than a single
byte.
This update is very similar with the use case of spdk_dif_generate_stream
in iSCSI target.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I063919a32153ac0daf6d6eb1836c0d5995b65d33
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459092
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Load reservation information based on ptpl configuration file, and
restore the information to NS data structure.
Change-Id: I5f46d49a6d1e6e49aab93ca7cd654469a3a08659
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455912
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
If DIF mode is local and C2H data is extended LBA payload, DIF should
be verified just before sending the payload.
Add a helper function nvmf_tcp_pdu_verify_dif and call it in
spdk_nvmf_tcp_send_c2h_data after completing nvme_tcp_pdu_set_data_buf.
When nvmf_tcp_pdu_verify_dif returns error, treat the error as fatal
transport error because the error is caused by the target itself.
Handle the fatal NVMe/TCP transport error by terminating the connection
as described in the NVMe specification.
On the other hand, data digest error is treated as a non-fatal transport
error because the error is caused outside the target. This is reasonable.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I9680af2556c08f5888aeaf0a772097e4744182be
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458921
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
I used pahole to see whether the alignment of the structure
is reasonable. After reorgnization, we can saved 16 bytes and 1
cacheline according to the information by pahole.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I1347e7c582fe2b00707e2841690b87d53cc61e33
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/460572
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Using naming rules consistent with other related libraries is helpful
to ensure the quality as verified by this patch series.
This patch changes a few parts to use iov and iovcnt for SGL operations.
Besides, name of an array points to the head of the array and is
constant. So copying name of array to an another pointer is not
necessary and can be removed.
Change-Id: I2324f28126b3088098c1c767cf6c060f22c175c3
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Previously we had used nvme_tcp_pdu_set_data() for incapsule data.
This patch changes handling incapsule data to use
nvme_tcp_pdu_set_data_buf() as same as H2C and C2H.
This unification is necessary to support DIF insert and strip
in NVMe/TCP target later.
Change-Id: I02cae8db94e51cf79a354dd64ad45f0e491ec08e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455920
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
NVMe/TCP target had assumed the size of each iovec was io_unit_size.
Using nvme_tcp_pdu_set_data_buf() instead removes the assumption
and supports any alignment transparently.
Hence this patch moves nvme_tcp_pdu_set_data_buf() to
include/spdk_internal/nvme_tcp.h and replaces the current code to use it.
Besides, this patch simplifies spdk_nvmf_tcp_calc_c2h_data_pdu_num()
because sum of iov_len of iovecs is equal to the variable length now.
We cannot separate code movement (lib/nvme/nvme_tcp.c to include/
spdk_internal/nvme_tcp.h) and code replacement (lib/nvmf/tcp.c)
because moved functions are static and compiler give warning if
they are not referenced in lib/nvmf/tcp.c.
The next patch will add UT code.
Change-Id: Iaece5639c6d9a41bd35ee4eb2b75220682dcecd1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455625
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
And also add spdk_sock_group_get_ctx function
Change-Id: I2a2a58b0588ff7d99d3538ea0a633a3b8c7a234b
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454538
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Maximum size of NQN is already defined to be SPDK_NVMF_NQN_MAX_LEN,
and hence use fixed size string whose size is SPDK_NVMF_NQN_MAX_LEN
+ 1 for spdk_nvmf_vhost::nqn.
This change will reduce the potential malloc failure.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2b9c7cc21200b3e88b5485ebfdcd5040bc6e3589
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459742
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Add file based reservation information definition, the data structure
can be used to store all the reservation information to a json
based configuration file, and enable this feature with REGISTER
command.
Change-Id: Ic93cfc5934a4ad96f11b96ec77bacb877edf6c10
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In our previous code, we will handle all the PDU until there is
no incoming data from the network if we can continue the loop.
However this is not quite fair when we handling multiple connections
in a polling group.
And this change is setting a maximal NVME/TCP PDU we can handle
for each conneciton, it can improve the performance. After some
tuing, 32 should be a good loop number. Our iSCSI target uses
16.
The following shows some performance data:
Configuration:
1 Command used in the initiator side:
./examples/nvme/perf/perf -r 'trtype:TCP adrfam:IPv4 traddr:192.168.4.11 trsvcid:4420'
-q 128 -o 4096 -w randrw -M 50 -t 10
2 target side, export 4 malloc bdev in a same subsystem
Result:
Before patch:
Starting thread on core 0
========================================================
Latency(us)
Device Information : IOPS MiB/s Average min max
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 51554.20 201.38 2483.07 462.31 4158.45
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 51533.00 201.30 2484.12 508.06 4464.07
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 51630.20 201.68 2479.30 481.19 4120.83
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 51700.70 201.96 2475.85 442.61 4018.67
========================================================
Total : 206418.10 806.32 2480.58 442.61 4464.07
After patch:
Starting thread on core 0
========================================================
Latency(us)
Device Information : IOPS MiB/s Average min max
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 57445.30 224.40 2228.46 450.03 4231.23
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 57529.50 224.72 2225.17 676.07 4251.76
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 57524.80 224.71 2225.29 627.08 4193.28
TCP (addr:192.168.4.11 subnqn:nqn.2016-06.io.spdk:cnode1) from core 0: 57476.50 224.52 2227.17 663.14 4205.12
========================================================
Total : 229976.10 898.34 2226.52 450.03 4251.76
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I86b7af1b669169eee2225de2d28c2cc313e7d905
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459572
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
By now (5.1 is released), the Linux kernel initiator supports the
success optimization and further, the version that doesn't support
it (5.0) was EOL-ed. As such, lets open it up @ spdk by default.
Doing so provides a notable performance improvement: running perf with
iodepth of 64, randread, two threads and block size of 512 bytes for 60s
("-q 64 -w randread -o 512 -c 0x5000 -t 60") over the VMA socket acceleration
library and null backing store, we got 730K IOPS with the success
optimization vs 550K without it.
IOPS MiB/s Average min max
549274.10 268.20 232.99 93.23 3256354.96
728117.57 355.53 175.76 85.93 14632.16
To allow for interop with older kernel initiators, we added
a config knob under which the success optimization can be
enabled or disabled.
Change-Id: Ia4c79f607f82c3563523ae3e07a67eac95b56dbb
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457644
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
If users set the persist through power loss configuation file,
that means the Namespace has the capability to support ptpl
feature, here we added a ptpl_activated flag to indicate that
the users enable the feature or not. Users can use Set features
or Reservation Register commands to change the value.
Change-Id: Iae3fd44085c5be5bf9574e49efa567e8212dee20
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Vhost testing crashed from Nightly testing, because a member
access within null pointer of type 'struct ibv_send_wr'.
Change-Id: If8f34f23864883ea73516d2d1fe3b30137c04316
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/458913
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
SQSIZE parameter validation in Connect command was broken because QID
field in qpair was used before intialization.
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: I8a0b359937d661df3b9888e6084e7d0b4a9056ea
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455667
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
NVMe bdev module support separate metadata now but NVMf subsystem
cannot process bdev with separate metadata yet.
Hence reject any bdev with separate metadata to be attached
explicitly by this patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I793c6c5f61deb766d7bf427ff67ccc57a48974cf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/457167
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For reservation feature in NVMoF, we can't support the persist through
power loss feature, now we will add the configuration file parameter
with Namespace, after users set the configuration file parameter with
one NS, then the PTPL feature can be enabled.
Change-Id: Id72699093f7e68318b9529f7bacc5c9804f7f86b
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455905
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Unsetting this flag will decrease the number of WRs retrieved during CQ polling and will decrease
the oeverall processing time. Since RDMA_WRITE operations are always paired with RDMA_SEND (response),
it is possible to track the number of outstanding WRs relying on the completed response WR.
Completed WRs of type RDMA_WR_TYPE_DATA are now always RDMA_READ operations.
The patch shows %2 better peformance for read operations on x86 machine. The performance was measured using perf with the following parameters:
-q 16 -o 4096 -w read -t 300 -c 2
with nvme null device, each measurement was done 4 times
avg IOPS (with patch): 865861.71
avg IOPS (master): 847958.77
avg latency (with patch): 18.46 [us]
avg latency (master): 18.85 [us]
Change-Id: Ifd3329fbd0e45dd5f27213b36b9444308660fc8b
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Signed-off-by: Evgenii Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456469
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
For the nvme device, I/Os are completed asynchronously. So we
need to check the outstanding I/Os before putting IO channel
when we hot remove the device. We should be sure that all the
I/Os have been completed when we change the sgroup->state to
PAUSED, so that we can update the subsystem.
Fix#615#755
Change-Id: I0f727a7bd0734fa9be1193e1f574892ab3e68b55
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452038
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
According to the TP 8000 spec in Page 26:
Maximum Number of Outstanding R2T (MAXR2T): Specifies the maximum
number of outstanding R2T PDUs for a command at any point in time
on the connection.
Note that by the spec, the target may only support single r2t
(which is the minimum possible), it doesn't have to use multiple r2ts
even if the initiator supports that. So remove the maxr2t and
pending_r2t variable in the tcp qpair structure.
In the original design, we think that maxr2t is the maximal active
r2t numbers for each connection. So if the initiator sends out maxr2t=16,
it means that all the commands of a qpair can use such number of R2T pdus.
So we need to wait for the available R2Ts for the request when the maxr2t
reaches the maximal value. But it is the wrong understanding of the spec.
In fact, each command has its own number of maximal r2t numbers, then we
do not need to use the wait method for R2T method anymore. So we remove
the state TCP_REQUEST_STATE_DATA_PENDING_FOR_R2T. Futhermore, we adjust
the related SPDK_TPOINT_ID definition.
In current patch, the target will support one active R2T for each
write NVMe command. Thus, we remove the function spdk_nvmf_tcp_handle_queued_r2t_req.
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7547b8facbc39139b4584637ccc51ba8b33ca285
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455763
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Or Gerlitz <gerlitz.or@gmail.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This matches the Linux kernel target. Users can
still decrease this default when creating the
transport (i.e. -p option for nvmf_create_transport
in rpc.py).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Icad59350a2cd35cfc4ad76d06399345191680c05
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454820
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We could run into issues with this if we were using an arbitrarily large
amount of cores to run SPDK.
Change-Id: Ia7add027d7e6ef1ccb4a69ac328dbdf4f2751fd8
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452250
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will help us not iterate through the whole list of connections when
only some of them have pending recvs.
Change-Id: I681bc98befbdda4e77ef333b7a086c08b2708eb3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449266
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will help save MMIO overhead. Especially in the SRQ case.
Change-Id: I6fb70cf6de4763450f97961f41ccdce3acec2e63
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449265
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By creating a list of qpairs, we can avoid looping over every connected
qpair to process sends each time we poll.
Change-Id: If24bbc363176f52fbfb756d56719edd885a21a11
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449264
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
By batching ibv sends each time we poll, we can reduce the number of
MMIO writes that we do.
Change-Id: Ia5a07b0037365abfa8732629c34d34a9ed49ac70
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It isn't obvious why hosts are being disconnected at the moment.
Change-Id: I5515ba40883ccb20921d0da013b27670212bf649
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453034
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are cases where srq can be a detriment. Add a flag to allow users
to disable srq even if they have a piece of hardware that supports it.
Change-Id: Ia3be8e8c8e8463964e6ff1c02b07afbf4c3cc8f7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452271
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The individual transports will adjust these sizes when
necessary. In fact, we have to remove this check, since
RDMA transport may adjust the io_unit_size based on the
max number of SGEs - and can adjust it to a value that
will fail this check if we reload the configuration.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2708c7f5aaa54a368ec932ec40dd6447f1a4fde0
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452474
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This restriction helps reduce the amount of padding when
printing out the event trace, allowing it to fit in a
small number of columns.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifa31e5a6967c7b9bc7028069effb71533f80596f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452736
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This was not used by any of the trace register descriptions.
Let's remove it rather keeping it around if we don't need it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idda809e2911db5be555ff6aa13695484a14bf665
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452734
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
During connect call based on queue type (AQ or IOQ), SQ size should be
validated against max sq size for that particular queue type.
Change-Id: I977d7556e4d04e37004d16c87efffd3b467fa62c
Signed-off-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452376
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We can use the rpoller->srq to check if a qpair is valid when processing
recv completions.
Change-Id: I6aa360adc48a3312ddcf79f10e2a65b502a7314f
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452247
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Mempools are based off of a ring structure which allocates its elements
as a power of two. It also only exposes n-1 elements to the user. So
when we create a mempool with 2^n elements in it, we have to allocate a
ring with 2^n+1 entries. By decreasing the number of elements in these
key mempools by 1, we can save a decent amount of memory.
Change-Id: I942c9dd4cf59096969bc2559fb46fd2084a07f09
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448875
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It used to be that we would get async events very infrequently. However,
with the introduction of SRQ, this number has gone up tremendously.
Change the way we report our these events so that we don't spam/confuse
people running the target.
Change-Id: I33070281fa854cbc17784d61bbbb870196ca8780
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452159
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If there are outstanding recvs for a qpair when it is destroyed, we need
to clear the qpair from it before reposting it. Otehrwise, we have a
potential heap-use-after-free of double free (depending on whether the
recv completion is in error state or not).
See github issues #730
Change-Id: Ic2009c761cbcc5e89174f62fbd0872d0489c67ca
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452122
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
At the RDMA level, we allow processing requests that should contain a
data transfer, but specify a length of zero to be passed up the stack
without a data buffer. See spdk_nvmf_rdma_request_get_xfer. In the case
of the reservation requests, we weren't checking whether req->data was
NULL before trying to copy into it causing us to segfault if we got a
malformed reservation request.
Found when using the fuzzer.
Change-Id: I320174ec72a8d298ab6ca44ef6a99691631f00ca
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451786
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It's not an error if the NVMe hard drive was formatted to 512 + 8 but
has no protection type, so we will also disable the protection for
NVMoF target.
Change-Id: I07e605cff9545f46c642f7ca783a4727a26abece
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451926
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We were setting this value in the target from our initiator, but it
turns out the rdma_conn_params struct is responsible for setting the
opposite side so we need to add it in the target side when accepting
connections.
Also, add a test to demonstrate target functionality when we overwhelm
the SRQ. It is useful to note that performance really tanks when you
start overwhelming the srq so it may be useful to use this test case to
check performance gains in edge cases over time.
Change-Id: Iac541bd9fc1d82eca9f21e7abc3f625663a6c460
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make the use of spdk_uuid_compare() to be consistent in the file,
also change the SPDK_INFOLOG to SPDK_DEBUGLOG to avoid the
repeated log messages for RESERVATION CONFLICT response.
Change-Id: I72fefbd520cefcaf25182c3ca3d21e3d87d17e94
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450884
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Now Host can get an asynchronous event notification when
registrants were unregistered/preempted or reservation was
released from the associate namespace, Host can send
get log page to clear related log pages and reservation
report to get the full overview of current reservation
configuration.
Change-Id: Idc57c19812490c7536503308989871515e9f2361
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439935
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In case of a DSM Deallocate (unmap) with multiple ranges, individual
bdev IOs are submitted for each range. If the bdev IO cannot be
allocated, the request is queued on io_wait_queue; however previously
submitted ranges may complete before memory is available for the next
range. In such a case, the completion callback will free unmap_ctx,
while the request is still queued for memory - causing a segfault
when the request is dequeued. To fix, introduce a new field tracking
the unmap ranges, and make sure the count is nonzero when the request
is queued for memory.
Signed-off-by: Yair Elharrar <yair@excelero.com>
Change-Id: Ifcac018f14af5ca408c7793ca9543c1e2d63b777
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447542
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We were incrementing over the end of the descriptor list and assigning
undefined values to the rsp opcode in SEND_WITH_INVAL case. We were only
hitting this error when mixing sgl and inline requests in the same
workload. We were just by chance hitting a four bit value that was set
to all 1s from the in capsule data from the last request.
Change-Id: Ied06356f3d22fa34a2cd869dfad6bdca8720791d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450873
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was not being properly set in the multi-sgl path.
Also add a verification step to the fio configuration file to prevent
against future regressions.
Change-Id: I510b6acd92bc2fbc9b6fbec1d59945cc53584ad3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reservation notification log page can be returned via the
get log page command with correct page number, users can
get zeored page buffer if the controller didn't have any
reservation notification log.
Change-Id: I99f5e4b8917a6919eb68359628efa1bead4b21b5
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439934
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
All the reservation commands are processed on subsystem's thread,
however the reservation notice log are controller related, and
the get log page command with reservation page will be processed
on controller's thread, so we use the same thread for generating
the log.
Change-Id: Ie000320d74242b979f6638d703523f063347ec29
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449852
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Existing code only update the subsystem's poll group reservation
information when unregistering the key, however, new registrant
and update the key actions also need to be updated.
Change-Id: Ib8db9eb457977757251403edb92eda073b846e59
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451274
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Rqpair qp and resources maybe not be created, if rqpair fail to
initialise. For example, in function new_qpair, the code run to
spdk_nvmf_qpair_disconnect, but rqpair is initialised in
poll_group_add.
Fix#557 segmentaion fault(core dump)
Change-Id: I1892e6d13e2d53dd5a7c4856d775f9b3b85da961
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450986
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
If rsp->status.sc != SUCCESS and xfer == DATA_CONTROLLER_TO_HOST,
We would not send the data WR, so clean the num_outstanding_data_wr.
Fix#728
Change-Id: I32259788e495ed76f8f02a9d871bd56356d93dc4
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450726
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
A host can use the Asynchronous Event Command to be notified of
the presense of one or more avaiable reservation notification
log pages. A reservation notificaton log page should be created
whenever an unmasked reservation notification occurs.
Change-Id: I8b83e5319725286dd0a5efc1b22d8ac4673e31e1
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/439931
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Nvmecli tool doesn't add parameter check when submitting
to NVMf target, so we add additional check in NVMf target
to prevent such cases.
Change-Id: Ieb2b3b3c22d71913f2743a0f9cdad4aba184c320
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450574
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Existing condition for updating subsystem poll group's reservation
information is wrong, when received the RELEASE command, the
reservation type may be changed to none, but it will not be
saved to the subsystem's poll group.
Change-Id: Idc177a0f03fb9611d6eda1e25a5b90caaa73d1be
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450727
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Should speed up operations, and allows us to remove the 16 byte link
object from the request structure.
Change-Id: Ie62df1f44d22580a7a7ae41c498295841d1e3064
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448080
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: To support the multiple SGL later.
Change-Id: I133a451100b736353cf98a6aaca879d290ff5b67
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448259
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This function will be exteneded later for multiple SGL
support.
Change-Id: I1f6962ec03c72e335efaa311a12d3891312fcc53
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were only using one enum from this whole struct, so there is no need
to store it. Plus the queries we use to update it are so infrequent and
only occur during connect and disconnect so I think we can save quite a
bit of space by removing this without compromising performance.
Change-Id: Icf29977a3c10cb289564fa2760a0059f07a0f8cb
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There was a lot of duplicated code here between states. I'm trying to
minimize the duplicated code without making it confusing.
Change-Id: I13183431e554c8a9f501b3385bbd7b59e2c83161
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448066
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Catch an edge case where a multi sgl request is longer than the allowed
transfer size.
Change-Id: I79779050fe951d16f1240e2c3d8cf5037e576ea2
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/440766
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is important to avoid thrash when we don't have enough buffers to
satisfy a request.
Change-Id: Id35fd492078b8e628c2118317f674f07e95d4dba
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449109
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The buffers are really specific to the request and not the wr or data
object. In the case of multiple wr requests, the maximum number of
buffers per req is equal to the number of SGEs in the NVMe-oF request
*2.
Change-Id: Ic59498bfed461d180adb2fb9a481ac5b11fa9252
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449108
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Enable parsing an nvmf request that contains an inline
nvme_sgl_last_segment_descriptor element. This is the next step
towards NVMe-oF SGL support in the NVMe-oF target.
Change-Id: Ia2f1f7054e0de8a9e2bfe4dabe6af4085e3f12c4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/428745
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
It's not standard to put a newline here - let's use a null
character instead.
Found while using nvme-cli - when creating a subsystem with
default serial number, the right justified callout text had
an extra newline in it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a81dafb4f6c30f7bf2dcebfa7a5b19cfe3ab5fc
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Changing i to iovcnt in all references to the req->iov structure will be
important when we start processing multi-sgl requests.
Change-Id: I90a9b6d872b94f846ae7d29a45dd2703eafa6175
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449201
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used by the multi-sgl version of this function as well.
Change-Id: Iafeba4836a77482fa2a158f86f1c17fe7fdeb510
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/449104
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The filter function can be used for IO commands, because all
the Admin commands related with reservations are not supported
in SPDK for now.
Change-Id: I44f0bf0017bafaee87d5f8ac03b0fd368f44c810
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436941
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This event is generated by NICs utilizing the SRQ feature when the last
RECV for that qpair is processed. I have confirmed this feature.
Change-Id: Ib6d6b6d02987f789b4d5dd3daf734e3351ee1974
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448063
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
With ASAN to run this cases, it will report issue about heap used after free
in spdk_nvmf_rdma_qpair_destroy. Resources have been released before,
change the order to in this tailq to release resources.
ERROR: AddressSanitizer: heap-use-after-free on address
0x6080000080e0 at pc 0x0000006e1e3f bp 0x7fd48b6c3df0 sp 0x7fd48b6c3de0
READ of size 8 at 0x6080000080e0 thread T3 (reactor_1)
0x6e1e3e in spdk_nvmf_rdma_qpair_destroy spdk/lib/nvmf/rdma.c:813
Change-Id: Ia1c12bca84955a2de60399e6b265c9b8901bb51e
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448534
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now data structure spdk_nvmf_subsystem_pg_ns_info holds all the
reservation information from the associate namespace, so for the
IO processing routine we don't need to send a message to the
subsystem's thread to check the IO command is permited or not.
Change-Id: Ib6be6abf7bf5f24c230dff80c163a1eb963e20d0
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448256
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Each subsystem's poll group will have a copy of namespace's
reservation information, for those NVMe commands which may
change the reservation state, the commnad itself should be
returned after updating each subsystem poll group's
reservation state. Then it's safe to check the reservation
state in each poll group's thread.
Change-Id: I64a5baedee9024bcac3957b29eb0330a20f21684
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446213
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Not doing so can cause us to hit asserts during the shutdown path. This
should fix an intermittent failure we are seeing on the test pool where
we hit the assert rdma_req->state != RDMA_REQUEST_STATE_FREE in
spdk_nvmf_rdma_request_process.
Note that this problem doesn't cause any data corruption when debug is
not enabled, it just causes us to probcess a subset of commands through
the state machine one extra time suring qpair shutdown.
Change-Id: Ibc36bfea87ec4089b8e2c7a915f48714fddb0b09
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447843
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will become important later on.
Change-Id: I94e5af03359e476afbc68664e43f44269ad5974c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448074
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When we have a shared receive queue, the number of outstanding items
associated with a completion queue is deterministic, and limited by how
many RECVs we have total in the SRQ. So, we can set the total size of
the Completion queue at the beginning of time and never resize it.
Change-Id: I787e4c5bbd52ac8948a323d1301f926f887cd91c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Consolidating error paths is common practice in SPDK so do that here to
make the function more uniform and save space.
Change-Id: I98c5d5f7feeb688f1d8b24f4d2d3461a43d00c1d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448191
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Array channels in the subsystem's poll group are indexed by
nsid - 1, so rename the previous num_channels to num_ms
makes more sense. Also embed the channels into a namespace
data structure here, and this can be reused in the following
patch.
Change-Id: If5d9aab4b1d5bcf7a3c22f29fa58d84752f0d4cc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446211
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This unifies the clean up path between SRQ and normal
operation.
Change-Id: I396d7e3749579f27b5bb1e89b9d6761a77ba5beb
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446979
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Depending on whether SRQ is enabled, resources may be allocated
to the rqpair or to the rpoller. Create a struct to hold these
pointers that can be used in both locations to avoid duplicated
code.
Change-Id: I2c8fc59009201d9e41721e6462a81732b529a9e0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Eugene Kochetov <evgeniik@mellanox.com>
This wasn't used anywhere.
Change-Id: I405af3c808be284d19218f3f04c1e90e33e31de8
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446977
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
The purpose is to use the single readv to read both
the payload the digest(if there is a possible one).
And this patch will be prepared to support the
multiple SGL in NVMe tcp transport later.
Change-Id: Ia30a5e0080b041a65461d2be13db4e0592a70305
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447670
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were only using one pd per device anywas, and this is necessary for
shared receive queue support.
Change-Id: I86668d5b7256277fe50836863408af2215b5adf9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Both Mellanox and Soft-RoCE NICs work with this approach.
Change-Id: I7b05e54037761c4d5e58484e1c55934c47ac1ab9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446134
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Persist through power loss feature is not supported for now.
Change-Id: Id2a5088389dc28b9d28d88c04ff819d20ea11902
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436940
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For number of registered controllers field in Reservation
Status Data Structure, we caculate all the controllers
in the subsystem which Host Identifier are same with
existing registrants.
Change-Id: Ib4de22c7020dbd8294f448f23c0c5c8c142629dd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The possible issue could be following if you shutdown NVMe-oF target
with TCP transport as an example,
=================================================================
==61022==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 560 byte(s) in 1 object(s) allocated from:
#0 0x7ffff6efcfe0 in calloc (/lib64/libasan.so.3+0xc6fe0)
#1 0x4c6216 in spdk_nvmf_tcp_listen /home/ziyeyang/spdk/lib/nvmf/tcp.c:680
Indirect leak of 48 byte(s) in 1 object(s) allocated from:
#0 0x7ffff6efcfe0 in calloc (/lib64/libasan.so.3+0xc6fe0)
#1 0x4a77b8 in spdk_posix_sock_create /home/ziyeyang/spdk/lib/sock/posix/posix.c:291
After checking the issue, it seems that we did not call
spdk_nvmf_transport_stop_listen when removing the subsystem listener.
And this patch can solve this issue.
Change-Id: Ic75d99cb0c6a3ba1c47ac79a2d8e3887b0f6b012
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/447020
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The reservation holder may release the reservation on
a namespace, release notification feature is supported
in comming patches.
Change-Id: If5d3158e691fcc782f7cf0b67a326bf62edf0531
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Unregistering by a host may cause a reservation held by the host
to be released. If a host is the last remaining reservation holder
or is the only reservation holder, then the reservation is released
when the host unregisters. This may occur with Acquire/preempt
and Register/unregister commands.
Change-Id: If59fe2fdaa69c8ad70f364618d6c281494ad6245
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446821
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A registrant can obtain a reservation on a namespace by executing
acquire command. Acquire command is associated with specific namespace.
For now only Acquire and Preempt reservation acquire action is
supported, Preempt And Abort will be supported in future.
Change-Id: Ifcbb6b414827393ffc266ceada5982b743716321
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reservations can be used by two or more hosts to coordinate
acccess to a shared namespace, host must register to a namespace
prior to establishing a reservation. Unregistering by a host
may cause a reservation release, this feature will be supported
after reservation acquire patch.
Change-Id: Id44aa1f82f30d9ecc5999a2a9a7c20b2af77774a
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/436936
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Borrow the ideas from iSCSI and optimize
the nvme_tcp_build_iovecs function.
Change-Id: I19b165b5f6dc34b4bf655157170dec5c2ce3e19a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446836
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Not all RDMA drivers fail back the dummy recv and send operations that
we send to them when destroying a qpair. We still need to free the
resources from these qpairs to avoid eating up all of the system memory
after multiple connect and disconnect events. Since we won't be getting
any more completions, the best heuristic we can use is waiting a long
time and then freeing the resources.
qpair_fini is only called from the proper polling thread so we can safely
call process_pending to flush the qpair before closing it out.
Change-Id: I61e6931d7316d1e78bad26657bb671aa451e29f4
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/443057
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In the error path, we were first decrementing a variable and then
asserting that it must be >0. These operations should occur in the
opposite order.
Change-Id: I6cec544faf17bb75cbfca3d3a3c173dc5db14f99
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: yidong0635 <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When the decision was made to uncouple the number of shared buffers from
the queue depth and allow the user to decide for themselves, the default
was also significantly lowered, which caused some issues when trying
torun performance tests (See https://github.com/spdk/spdk/issues/699).
While this is a user modifiable variable, it is still best to keep the
higher default value.
The original value was equivalent to max_queue_depth *
SPDK_NVMF_MAX_SGL_ENTRIES * 2 with the defaults for max_queue depth and
max_sgl_entries being 128 and 16 respectively. Hence 4096
fixes: 0b20f2e552
Change-Id: I809e97a10973093a2b485b85bca7160091166f70
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/446525
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
I think this simplifies the process a little bit.
Change-Id: Icc87a59c9f6fd965ef35531975b7036d85c4bc95
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445916
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We were only using one value from this array to tell us if the qpair was
idle or not. Remove this array and all of the functions that are no
longer needed after it is removed.
This series is aimed at reverting
fdec444aa8 which has been tied to
performance decreases on master.
Change-Id: Ia3627c1abd15baee8b16d07e436923d222e17ffe
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445336
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since we no longer rely on the state queues for draining qpairs, we can
get rid of most of them. We cn keep just a few, and since we don't ever
remove arbitrary elements, we can use stailqs to perform those
operations. Operations on Stailqs carry about half the overhead as
operations on tailqs
Change-Id: I8f184e6269db853619a3581d387d97a795034798
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445332
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch expose backend's bdev's PI setting to the corresponding
NVMe-oF Initiator by Ideintify command, and removes the check if
block size is 512 multiple.
These change enables NVMe-oF Initiator to send extended LBA payload.
Change-Id: Ia7aa8332d36f056872a515b6da90c83112edb909
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/445056
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If the current recv_state of qpair is same with the state to be set,
we will print error message. And checked the current code,
we should add a check to avoid this.
Change-Id: I49334f637c48e565e785d1fe6d0f000e18b2048a
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/445653
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Purpose: solve the coredump issue for the buffer
return later in spdk_nvmf_tcp_request_free_buffers.
If keep this statement, we cannot return the buffer
to the polling group.
Change-Id: Ib5c95ba54b37540950e654110fe6317cab507076
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/445435
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Error logs in nvmf_rdma_dump_request lead to report error about
address points to the zero page, add judgement to return.
this issue occurs in heavy load fio testing.
Change-Id: I50302be88b3af53f718e3800aa16df7c506ca4e8
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441110
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
From TP8000 spec 7.4.7,
"In response to a C2HTermReq PDU, the host shall terminate the connection.
If the host does not terminate the connection in an implementation specific
period that does not exceed 30 seconds, the controller may terminate the
connection on its own".
It means that the timeout is designed for: when the target is
sending out C2hTermReq, if the host does not terminate the connection,
the target should terminate the connection.
PS: For detecting the malicous connection without sending response
(such as no response of R2T PDU) which should be another patch.
Change-Id: I586dbb235d99aeab5d748a19b9128cd8b0cef183
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/440831
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The persistence feature can't support for now, but as the features
are mandatory for reservation, so add the two function here, and
we can enable it with future patches for power loss persist feature.
Change-Id: Ic358eda00058809bbfd6984b0861f8b6b5aabecd
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/438213
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When this structure was brought up to the generic layer, the tcp
transport was using max_io_size and the rdma transport was using
io_unit_size. In the interest of conserving memory, we should use
io_unit_size instead of max_io_size.
Change-Id: I2633306fcbfd8c3d557445959c745cb2d9a0999e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442778
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We should never be going over these limits in the respective transports,
but add asserts to check this during testing.
Change-Id: Ifcaa82ccf58546a38020b31df54ee5d1d9822b8b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This intermediate state is unused and meaningless. the qpair transitions
into this state right before calling a synchronous operation and then
transitions to active as soon as that operation completes successfully.
If the operation did not complete successfully, we were leaving qpairs
in this weird intermediate state when for all intents and purposes they
had reverted to an uninitialized state. Keeping qpairs in the
uninitialized state until they have been added to a poll group creates a
meaningful distinction between states that can be actionable from the
transport level.
Change-Id: I6de9bc424b393b6fff221aa2f4212aaa91488629
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443471
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Connections in the uninitialized state haven't been added to a poll
group yet, so submitting dummy requests to them will be pointless since
they will never be polled. We need to reject the connection and destroy
the qpair immediately.
Change-Id: Id5dd711882e1ae7c13ae32c06da2285186b00a1b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443470
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Since there are multiple events/conditions that can trigger a qpair
disconnection, we need to funnel them to a single point of entry. If
more than one of these events occurs, we can ignore all but the first
since once a disconnect starts, it can't be stopped.
Change-Id: I749c9087a25779fcd5e3fe6685583a610ad983d3
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443305
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
For devices that support fewer SGE elements than our default values, we
need to adjust the I/O unit size so that we don't ever try to submit
more SGLs than we are allowed to.
Change-Id: I316d88459380f28009cc8a3d9357e9c67b08e871
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442776
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This value was not being decremented when we got SEND completions for
write operations because we were using the recv send to indicate when we
had completed all writes associated with the request. I also erroneously
made the assumption that spdk_nvmf_rdma_request_parse_sgl would properly
reset this value to zero for all requests. However, for requests that
return SPDK_NVME_DATA_NONE rom spdk_nvmf_rdma_request_get_xfer, this
funxtion is skipped and the value is never reset. This can cause a
coherency issue on admin queues when we request multiple log files. When
the keep_alive request is resent, it can pick up an old rdma_req which
reports the wrong number of outstanding_wrs and it will permanently
increment the qpairs curr_send_depth.
This change decrements num_outstanding_data_wrs on writes, and also
resets that value when the request is freed to ensure that this problem
doesn't occur again.
Change-Id: I5866af97c946a0a58c30507499b43359fb6d0f64
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443811
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The typical rdma qpair disconnect function goes through the function
_nvmf_rdma_disconnect_retry. When this function was introduced, it was
discovered that we could receive a qpair disconnect event for a given
qpair before that qpair had been assigned to a poll group. In order to
ensure that the disconnect procedure completed properly, we waited on
the current thread in _nvmf_rdma_disconnect_retry for the qpair to be
assigned a poll group before we finally disconnected. see rdma.c:2250.
Since _nvmf_rdma_disconnect_retry was not necessarily called from the
poll group's thread, we relied upon the assumption that the group
variable would never be set back to NULL. See the comment on rdma.c:
2243.
However, in _spdk_nvmf_qpair_destroy we were setting the group back to
NULL. This operation can result in the following set of operations
across multiple threads that prevent a qpair from ever being fully
destroyed.
1. thread 1: receive a disconnect event - call nvmf_rdma_disconnect
2. thread 1: from nvmf_rdma_disconnect call
spdk_nvmf_rdma_qpair_inc_refcnt - setting rqpair->refcnt to 1.
3. thread 2: call spdk_nvmf_rdma_poller_poll.
4. thread 2: in spdk_nvmf_rdma_poller_poll reap a completion with an
error status which causes us to call spdk_nvmf_qpair_disconnect -
rdma:2846
5. thread 2: spdk_nvmf_qpair_disconnect calls _spdk_nvmf_qpair_destroy which sets
qpair->group = NULL
6. thread 1: from nvmf_rdma_disconnect we call
_nvmf_rdma_disconnect_retry which checks if qpair->group == NULL. If
that is the case, we assume that the qpair has not been assigned a group
yet and send ourself a message to call _nvmf_rdma_disconnect_retry again. see rdma.c:2253
7. thread 2: from _spdk_nvmf_qpair_destroy we call
spdk_nvmf_transport_qpair_fini which results in a call to
spdk_nvmf_rdma_close_qpair. which sends dummy send and recvs to the
qpair.
8. thread 2: we call poller_poll and get completions for both the send
and recv dummy requests. This results in a call to
spdk_nvmf_rdma_qpair_destroy.
9. thread 2: spdk_nvmf_rdma_qpair_destroy checks rqpair->refcnt and when
it sees that it does not = 0 (see step 2 above) it returns without
freeing the resources. see rdma.c:629
10. thread 1: we keep churning in _nvmf_rdma_disconnect_retry sending
ourselves messages because rqpair->group is going to be null. Thread 1
never reaches line 2257 where it sends a message to call
_nvmf_rdma_qpair_disconnect. _nvmf_rdma_qpair_disconnect is the function
that decreases the rqpair->refcnt and allows us to make forward progress
on destroying the qpair.
I encountered this issue while trying to disconnect from our target
using the kernel initiator with an x722 NIC. I think the timing on this
bug comes out with that specific configuration because come of the calls
in the disconnect path on thread 1 fail causing it to take longer giving
a chance to the second thread to delete the qpair.
There are really two issues at play here. We don't have a single point
of entry for disconnecting RDMA qpairs, and we rely on the qpair->group
variable never being set back to NULL. This patch addresses the second
issue, and the next patch in the series addresses the first.
Change-Id: I65395d0bbb67edfa7bad2ddc70906606c3d83781
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/443304
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This doesn't fix any bug, but it makes more sense to leave the qpair
in the NVME_TCP_PDU_RECV_STATE_AWAIT_PDU_READY state until it
receives at least one byte.
Change-Id: Ic5f34a733a80b58f65a1334fae7e07dbded2b3d0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441811
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The management channel was used in the RDMA transport prior
to the introduction of poll groups and made its way over to
the TCP transport when it was written. Eliminate it in favor
of just using the poll group.
Change-Id: Icde631dd97a6a29190c4a4a6a10a0cb7c4f07a0e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442432
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
max_read_depth should be based on max_qp_init_read_atomic, or the
maximum number of read values that the initiator will accept as
outstanding.
The device attributes object contains values for both the initiator
(remote side) and the target (local side). All attributes with the name
init in them are meant to correspond to the initiator. The
qp_read_atomic value represents the number of reads and atomic
operations that can have this device as the target. qp_init_read_atomic
represents how many read operations the initiator has said that we can
have outstanding that have the initiator's rdma device as the target.
Since this number represents how many outstanding reads we will send to
the initiator at once, we should use the qp_init_read_atomic value.
Change-Id: Iacc044e8321080de8accd9128ac3777bbb948afc
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442409
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is a holdover from before poll groups were introduced.
We just need a per-thread context for a set of connections,
so now that a poll group exists we can use that instead.
Change-Id: I1a91abf52dac6e77ea8505741519332548595c57
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442430
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The READ and ATOMIC in the comment above are capitalized, so
make this all caps too.
Change-Id: I49fae2ceb826b22953d9b26d42b95f17e2dac617
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442427
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
request.c didn't have much code, so let's collapse
it into ctrlr.c and make that the place where all
software emulator of the NVMe controller, including
request handling, is done.
Change-Id: Id7c98010cb222a414a5aa0b78bfb299a0ffc418f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440592
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Previously, all I/O commands were implemented by simply
passing them to the bdev layer. Now, some I/O commands will
be emulated. Prepare for that by moving the code for this
function to ctrlr.c, where the emulation will occur.
Change-Id: Id34e5549e5ce216d602fb347b4506fbd324eed4e
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440591
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This was previously very unmap specific. Make at least the top level
DSM call more general purpose by eliminating the unmap_ctx.
Change-Id: I9c044263e9b7e4ce7613badc36b51d00b6957d3a
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440590
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
These are left over from the removal of virtual mode over a year ago.
Change-Id: Ia797c4570bf9090346ff22ab9c7d719a78d023d0
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440589
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This was only used by the target, and it didn't actually need it.
Change-Id: Ibcef410165efdc16077da24419580ed51b087d70
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442440
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This type was actually two entirely different types for
the initiator and the target, so just make it void.
Change-Id: I15512d9d4efd790dce0fa4323b7230de66144bc6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442438
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a connection goes to close and has no I/O outstanding,
the current_recv_depth was being decremented beyond 0 and rolling over.
If the poll group then finds a successful receive completion on the next
poll (for a command that arrived prior to starting the disconnect but
hadn't been processed yet), it would trip the max queue depth check
added recently and start another disconnect process. If only one command
arrives in this window, everything actually works out ok.
However, if there are two receive completions sitting in the completion
queue after the disconnect process is started, the first one does the
double disconnect and the second one does another disconnect which ends
up dereferencing a null pointer.
Since there is always a special reserved slot for the dummy recv, don't
do decrements or increments of the current_recv_depth for the dummy
recv. This allows the code to still enforce the actual max_queue_depth
on recvs without underflowing or overflowing the counter.
Change-Id: I56c95b2424e956a3b007b25c50cbf47262245b8f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/442642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since we have different requirements for submitting RDMA read and write
operations, we should track them separately so that we don't block
writes when the device does not have enough resources for read
operations.
Change-Id: I5d6424c0e26f2f5362866d1bb21eb46700c245da
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441794
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Before, the number of WRs and the number of RDMA requests were linked by
a constant multiple. This is no longer the case so we need to make sure
that we don't overshoot the limit of WRs for the qpair.
Change-Id: I0eac75e96c25d78d0656e4b22747f15902acdab7
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439573
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This gives us more realistic control over the number of requests we can
submit.
Change-Id: Ie717912685eaa56905c32d143c7887b636c1a9e9
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441606
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
rw_depth was a misinterpretation of the spec. It is based on the value
of max_qp_rd_atom which only governs the number of read and atomic
operations. However, we were using rw_depth to block both read and write
operations which is an unnecessary restriction. write operations should
only be governed by the number of Work Requests posted to the send
queue. We currently guarantee that we will never overshoot the queue
depth for Work requests since they are embedded in the requests and
limited to a size of max_queue_depth.
Change-Id: Ib945ade4ef9a63420afce5af7e4852932345a460
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441165
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This will be necessary later on when we need to throttle send and recv
requests in software.
Change-Id: Ifb25eaabd15e101fbfc2959a08a321f80857b280
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441604
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Both initiator and target are using the minium 10 seconds
timeout value, so set it in kas field when initializing
the controller.
Change-Id: Idda68bdfe27613ebaf706a0de497145d3f9ed766
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441995
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Currently, the code does not comply with the spec,
so remove such code for 19.01 and will add the code
which complies with the spec for 19.04
Change-Id: Icd3b2573fbc46dc2fa7a00c6672c23ea01ffe0ee
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/441985
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
If there is socket read error, we should directly disconnect
the socket instead of set the tqpair into RECV_ERROR state.
When it is in ERROR_RECV state, it does not mean that
we should close the socket immediately.
Change-Id: I975906653c13eb3fa5195799c517015435176785
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/441830
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Assigned CQ size when creating CQ may run over due to
heavy workload with too many qpairs. Enlarge it dynamically
can prevent IBV_EVENT_CQ_ERR caused by CQ's runover.
This patch fixes issue #498:
https://github.com/spdk/spdk/issues/498
Change-Id: I6c2d7194d4147d812d49d4fe787fcba5c6bbede9
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440853
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This change was provided by GitHub user vikasbrcm to fix issue 562.
I am uploading his change to facilitate testing of the issues and
possibly get it merged before the 19.01 window closes.
Change-Id: I58fb1058f68c6c02006ceed6e577be627e6dbc09
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/441611
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The controller shall treat a Keep Alive Timeout in the same manner
as connection loss. If the Keep Alive feature is in use and the
timer expires, then the controller shall:
1, stop processing commands and set the Controller Fatal Status
(CSTS,CFS) bit to '1';
2, terminate the NVMe Transport connection;
3, break the host to controller association;
A timer poller is added to each subsystem to monitor timeout event.
Change-Id: I001afab8a6764f30c39df37fa96384180d117486
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch will solve the following two cases:
1 Free the pdu resources. Add the checkout of c2h_pdu_data_cnt of the qpair.
2 Do not recyecle the req accoriding to the pdu in the send_queue, but directly
recylcing the reqs in TCP_REQUEST_STATE_TRANSFERRING_CONTROLLER_TO_HOST state.
Change-Id: I5856c3421019ec49d576d3dae4c62fefbb3925ca
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/440847
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Fix potential bug. In _spdk_nvmf_subsystem_add_ctrlr(), befor free(
ctrlr) we should free ctrlr->qpair_mask. Because we set qpair->ctrlr
= NULL, when destroy qpair the qpair_mask is not released. For the same
reason, req->qpair->ctlr = ctrlr is placed at the bottom of the function.
Change-Id: I38e268b532ff3ce87721c02f15ac4f674856d103
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440858
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This change is related to enabling multi-sgl element support in
the NVMe-oF target.
For single SGL use cases, there is a 1:1 relationship between
rdma_requests and ibv_wrs used to transfer the data associated with
the request. In the ingle SGL case that ibv_wr is embedded inside of
the spdk_nvmf_rdma_request structure as part of an rdma_request_data
structure.
However, with Multi-SGL element support, we require multiple
ibv_wrs per rdma_request. Insted of embedding these
structures inside of the rdma_request and bloating up that object, I
opted to leave the first one embedded in the object and create a pool
that requests can pull from in the Multi-SGL path.
By leaving the first request_data object embedded in the rdma_request
structure, we avoid adding the latency of requesting a mempool object
in the basic cases.
Change-Id: I7282242f1e34a32eb59b55f326a6c331d455625e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/428561
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Purpose: To avoid the buffer contention among different
polling groups if there are multiple core configurations
for NVMe-oF tcp transport.
Change-Id: I1c1b0126f3aad28f339ec8bf9355282e08cfa8db
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/c/440444
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It was possible to leak pollers if we had multiple devices in the
transport. The new err_exit path fixes this.
Change-Id: Iafd5643c67fae741113f10afe761af1988cb6a9b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/439419
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is implemented at a generic level.
Change-Id: Ibf8167e828f8da27cc26cd04e611c3f3c084319a
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440418
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This patch is used to dump the requests state if
the tqpair's resource is not freed.
Change-Id: Ic4780662558d73267d4f1ebabfc22780fafec4ec
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440846
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This is shared between all currently valid transports. Just move it up
to the generic structure. This will make implementing more shared
features on top of this a lot easier.
Change-Id: Ia896edcb7555903ba97adf862bc8d44228df2d36
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/440416
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
