Some of the values were passed as literals rather than
values of variables.
Resulting in following errors:
08:34:32 # fio --name=fio_test --filename=/dev/nbd0 --offset=0 --size=lvol_size --rw=write --direct=1 --do_verify=1 --verify=pattern --verify_pattern=0xcc --verify_state_save=0
fio: failed parsing size=lvol_size
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If0cd104d83646c1e5c23029cdc27a18340982187
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1458
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The period was being treated as a wildcard by awk so it was improperly
parsing the libspdk_sock*.so library versions.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I37d3cfaf7bf9c29c6d5efb647e68d8a8be715a2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1513
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Run iscsicleanup once before running the tests. This is
to ensure we delete any stale entries or files if they
were not removed properly in previous test runs.
Fixes#1311
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Idb415adddfaa7cbb443377a292fae357c1707e79
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1539
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Test in event.sh take 5 seconds on CI at this time.
For the tests to run both SPDK_RUN_FUNCTIONAL_TEST
and SPDK_TEST_EVENT had to be enabled.
This served as very minor time saver, so removing
this flag shouldn't affter test times more that the
5 seconds.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ie3eaa587daf28b2efbc3cfdff5ad648b7529e7f1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1493
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Building docs is tested in autobuild_test_suite
when SPDK_TEST_AUTOBUILD is enabled.
SPDK_BUILD_DOC can be safely removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic871febdcaba708e2fbe6a55d31ec3ddb101a818
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1492
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Building "--with-shared" is tested in autobuild_test_suite
when SPDK_TEST_AUTOBUILD is enabled.
SPDK_BUILD_SHARED_OBJECT can be safely removed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I05b1d04c3e28ce72c0a4a6deb89d0b6d02e2bb67
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1491
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This kind of changes are now done through out the UTs in SPDK.
Patch here just adds them here as well.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I66fc06bbea038e328ba27bdea58b6e6479eee122
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
lvs_load, lvols_load and lvol_open were already added to the suite.
Commit 2f22884 mistakenly added those three when adding lvol_refcnt.
To remove those UT actually fixes earlier in the series were required,
as incorrect errnos were checked before and this specific order of
UTs set the right errno between them.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7188be49171b6254146c6d144f9a54a689151b60
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1486
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Simply some of the functions can be replaced with the stub
defines, so they were.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3095855c02c605fe0d66ee720a5025cdd8933873
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1485
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are three types of callbacks in lvol library:
- void(cb_arg,lvs,errno)
- void(cb_arg,lvol,errno)
- void(cb_arg,errno)
First two are used in cases where result of operation is
either lvs or lvol.
Last one is used for any operation that does not produce
either.
There is no need to keep more than one callback function
for last one, since they all are doing the same thing.
lvol_op_complete(), lvol_store_op_complete(), close_cb() and
destroy_cb() are now replaced with op_complete().
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Idd8fcf327ef56ad7d27e2e31cad9ddc44c80e5c8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1484
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There were two variables (g_lvserrno and g_lvolerrno) to
assign and check after operations.
This caused issues when developer mistakenly created callback
that assigns one and then checks the other.
This UT is ran to completion each time and only single operation
is done at once. There is no need to account for both.
This patch removes g_lvolerrno.
Next one will simplify callbacks.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7d16b1913c13de56e1df2f5e36db11f15430979b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Still testing to do both basic functionality as well as use of
various combinations of options.
Instead of using LBA range locking to protect the threads from
each other, this solution assigns a specific LBA range per target.
The LBA ranges are based on how many threads are working on any
one target.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I6a6588506a43292969fffe1baf060148d6772ee5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1207
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Without the shebang, the builtin file command assumes autotest_common.sh
is a c file. This is obviously not the case, but it messes up file type
checking when we are confirming that all files are checked against scanbuild.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I45f32b23ef01b07ce9b72caed743e6670b99055e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1311
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This file is not included in any other test files and it isn't compiled.
It appears to be a remnant of when we had distinct vhost_blk and vhost_scsi
unit tests.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I0b29d9e601f9d86b51cf8ba52ec5dc96bd02eef9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1310
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
This is to avoid spammy stderr comming from ceph/stop.sh:
+ umount /dev/loop200p2
umount: /dev/loop200p2: not mounted.
+ losetup -d /dev/loop200
losetup: /dev/loop200: detach failed: No such device or address
Change-Id: Id1ecfc5da1a530c63d454bfacc8fb36c29549f8e
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1006
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Additionally, part_dev_by_gpt() is dropped in favor of having entire
gpt setup done from within the setup function.
Change-Id: If026215138f2de20176ebc920a2427c18de991b5
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1019
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We only set the flag to false when the controller reports SGL supported
and can use byte contiguous buffer. Also check the data block's alignment
for hardware SGL.
Change-Id: Id936c49823963000d0543fc95fbb6edba3118feb
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1352
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Use serial number to identify connected nvme subsystem.
/dev/nvmeX might be taken by some other device which is
not even a part of the tests.
It also might be affected by previous tests and not
always show up with the expected name.
Fixes#1308
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I8d0e1b05f22a1263340014abdaf557f0fef5ad82
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1408
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Update spdk_thread_poll() to count SPDK thread stats correctly on multiple
SPDK threads per reactor configuration.
spdk_thread_poll() gets start time and reads TSC at end as end time,
and then gets delta between them as run time. Run time is added to idle
time or busy time according to the result of polling.
Reactor overhead is included into the next thread which calls
spdk_thread_poll() now.
spdk_thread_poll() saves the end time to the current thread to use it
as the start time of the next thread.
Unit test framework for this patch and the next patch need to access
thread->tsc_last. In the next patch, reactor will use the end time of
the current thread to the start time of the next thread in reactor_run()
to realize the idea.
Hence add an new API spdk_thread_get_last_tsc(). The corresponding
variable is named as tsc_last and it is good and is aligned with
DPDK (DPDK has used tsc_start and tsc_end as variable name). But
last_tsc will be better as API name because the last TSC value is
easier to understand.
Then add necessary unit test and update the unit test framework.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I5e465e9283c032acb427576d0c90f9e1414f2271
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1048
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Group the global parameters into the global structure
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I552b536869221efb58bc30820b7adfc01c74c293
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1388
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This function kicks off the draining process, so name it appropriately.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ic447aaa01612f6355ff4404d476419b55a3d0cff
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1386
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In practice this worked out fine because the next step did an
spdk_for_each_core() which would always complete after the
performance dump with our current event library. But just in case,
make this an explicit wait.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I07b96772ba15113cd04453243c980c6e405be872
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1385
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
More descriptive name. This is the number of outstanding
construct_job operations.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I5c79ae06a521a8b6ef930146b0ce08791370a25c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1384
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Begin shifting to a model of "jobs", each defined as a single-threaded
I/O pattern.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: If6c0cfc1a59d3acdec1e1e6ad65a16f810582aa8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1382
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There's one of these per core and it's a collection of other
jobs to run, so name it reactor.
In the longer term, this reactor will go away and each "job"
will map to a separate spdk_thread.
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ica5b19e6edb2509b48059d829e22a734acd6b298
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1381
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The revert asynchronous API doesn't run as the *real* asynchronous
way, because the drive can only support synchronous module and only
1 session is supported. The reason why we added this API is that
RPC call has the default timeout value here, while the revert may
take over several minutes, the API itself doesn't short the revert
action, so just remove it and use the synchronous API instead.
The revert action will erase all the users data and bring the drive
back to the factory state, it should run in the synchronous mode,
so just remove the asynchronous API and we can increase the timeout
value when using RPC to call this API.
Change-Id: I08a082edea6385e378399423bbb229d05f8bc262
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1232
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Inform the user that something actually happened
during the test, rather than just displaying
"Test start/end".
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I69a048a5a2fd47a3f18ea2988a06aee439c06fc3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1412
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
"ls" is not needed in for loops based on filename
expansions.
Additionally "ls" was treated as first
element of for loop which cased "No corresponding
object" message to be printed which could be
mistakenly considered a problem during the build.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: If5bfdb15410da36c98d9992cd04a02906599a3e0
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1411
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This will allow to test parts of compress bdev on systems
that do not have all types of PMDs.
Once case if for testing in VMs.
For reference on changes in execution time. Current times:
Per-patch = 8 seconds
Nightly = 84 seconds
Running the script twice in this patch, most likely doubles the time.
It is not an issue in per-patch, but if increasing nightly times is blocking
different solution could be done here.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I684569651f2290956f94fcec99cebf0fe13ba0d2
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1364
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
In case there are no /dev/nvme* devices found, the test will continue
regardless trying to pass literal glob strings as an argument to nvme.
This, of course, fails, e.g:
ci.spdk.io/public_build/autotest-per-patch_7066.html
Avoid this by generating list of the nvme devices and abort the test
gracefully in case it's empty.
Change-Id: I71628aa78a5cfc6c5696f1fc17ed3480d4c642ee
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1392
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
super->clean value signifies if blobstore was unloaded
cleanly.
If it was not, then during bs_load the _spdk_bs_recover()
procedure if called.
Meanwhile bs->clean is always set to 1 after load, causing very first
blob_persist to also re-write super block with the super->clean
set to 0. To signify that md has changed and possibly trigger
the recovery if clean bs unload does not occur.
When the re-write of super block succeeds the bs->clean is set to 0,
because further re-writes of super block are not needed on next
blob persist.
This patch resolves issue when:
1) reading super block fails - execution should backoff, to prevent
writing an empty buffer as super block !
2) writing super->clean = 0 to the super block fails - execution
again should fail, and bs->clean should not be set to 0. It will
cause next persist to attempt re-write again.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia07cc5c6c107310059b50886edb7283c176b9169
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1164
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This change verifies that not only it is possible to open
the snapshot, but also the spdk_bs_create_snapshot() reported
success.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ifb7fcc91802c838710f1f9be41090057268a5900
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1262
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
blob_create_snapshot_power_failure() test always attempted
snapshot creation until the snapshot did open.
Which meant that on bs reload after dirty shutdown,
the original blob might be in unrecoverable state.
UT did not verify create call beyond that point.
Next patch will stop after snapshot is possible to be opened,
AND the spdk_bs_create_snapshot() returned success.
This patch makes it easier to recreate same starting
conditions after snapshot did not open.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I1901b29a8319b2203a855e7879821ed3850f4917
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1261
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In general it is not possible to delete snapshot when
there are clones on top of it.
There is special case when there is just a single clone
on top that snapshot.
In such case the clone is 'merged' with snapshot.
Unallocated clusters in clone, are filled with the ones
in snapshot (if allocated there).
Similar behavior should have occurred for extent pages.
This patch adds the implementation for moving EP from
snapshot to clone along with UT.
The UT exposes the issue by allowing delete_blob
to proceed beyond just unrecoverable snapshot blob.
Fixes#1291
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib2824c5737021f8e8d9b533a4cd245c12e6fe9fa
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1163
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This patch is used to add the async network I/O support in
sock layer. If code is configured with I/O uring, --with-uring,
we can use io uring in Linux (version >=5.4-rc3).
PS: We also make VPP's default priority > uring, because
for the iSCSI or sock test linked with VPP. It tests VPP with
a given address (which is not a special VPP can only open address),
so using uring can also listen those address succefully. And if we make
uring with priority > VPP, actually, VPP will not tested in those cases.
Additionally, the current CI pool is not ready for test, we need
wait for the CI system ready. And I test on my local platform, it works.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: Ie8ee3c8ddf8d2a7264f2b382376733e002816dcc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/952
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Previously the macro SN32_LT and SN32_GT had been added to iSCSI
library. But such comparisons may be used in other libraries.
So add two inline helper functions spdk_sn32_lt() and spdk_sn32_gt()
to include/spdk/util.h.
Add unit test for these functions. These functions are located in
header file but math.c is the place if they are located in source file.
Hence add unit test as the one for math.c.
The next patch replaces the macro SN32_LT and SN32_GT by
spdk_sn32_lt() and spdk_sn32_gt() in iSCSI library, respectively.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id3e4d80fea98ad4ae1516e27b9c9e8ec6f37e7a8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1346
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The function is almost 20 lines long and it essentialy
appends two lines two a specified file. We don't need it.
Change-Id: I565de8e54aa71b04f15745456bec7b2b3b8fc178
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1288
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There's no reason not to publish those. Especially if
they're needed in other public headers.
Change-Id: I7dfc6922fcc0dfc46822ad8a16a375f997b98e84
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1041
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Overwrite ini config with json and use it in such a form throughout
the entire test run.
This patch is the beginning of the series targeting conversion of
ini config to json in blockbdev tests.
Change-Id: Ic64f24b2ea9df85ad1ba3d038a78384e6f2badf9
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/530
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Do not use iter_pci_class_code function in tests to
iterate over NVMe drives. This function can return
drives which at the moment of execution can not be
whitelisted for use.
This can result in test errors (such as simply
bdev_nvme_attach_controller RPC command failing) or
even using and deleting data from NVMe drive which
was not meant to be used in tests.
Fixes#1235
Change-Id: I82b9935fc88605b636c2096be6c71d4880a567c8
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1309
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This function removes leftover fio files, but fio is
not run in this test. Remove it.
Change-Id: I1522a018c9cc3093bd1bcb1c2361dd7b31deacbe
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1292
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
NVMe specification in ch.7.6 "Controller Initialization" suggests to
use only Set Features "Number of queues" command and says nothing
about Get Features. All required information is available after Set
Num Queues step.
Fixes#1270
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Change-Id: Ide38ba9c7f063f1d6b13bfce4232c588cc906784
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1271
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The fedora machines running unit tests will require this package to run
the ABI compliance checking tests.
Change-Id: I9f9307c04e235cb9b6f78c4908609a529a86ccba
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1137
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
We don't fail the test based on missing symbols so printing out the
information about them during tests is not super useful. Restricting the
output to what caused the test to fail will allow for simpler debugging.
Change-Id: I7b251dfe39c940074d7c8d887941adb635fd3965
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1094
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This test checks to confirm that the major version for the SO
has been incremented if symbols have been removed or changed since
the last release or the minor version if symbols have been added.
Change-Id: I2bbef858c4cb18afbb854c90782495c45605c63d
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1068
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The hardcoded path is replaced with $CONFIG_FIO_SOURCE_DIR as defined
during the compile time.
Additionally, all checks which determine if fio is available are now
based on $CONFIG_FIO_PLUGIN=y knob instead of the presence of the fio
repo.
Change-Id: Ie469747f3863c9561f53d32e8c3f29778afaaf74
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1108
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
The next patch will create poll group threads dynamically for
NVMe-oF target, and will need to wait for completion of poll group and
I/O channel destroy. This is a preparation for the next patch.
Add callback function and its argument to spdk_nvmf_poll_group_destroy(),
and to struct spdk_nvmf_poll_group, respectively.
The callback has not only cb_arg but also status as its parameters even
if the next patch always sets the status to zero. The reason is to follow
spdk_nvmf_tgt_destroy's callback and to process any case that the status
is nonzero in future.
spdk_nvmf_poll_group_destroy() sets the passed callback to the passed
poll group.
Then spdk_nvmf_tgt_destroy_poll_group() calls the held callback in the
end.
This change will ensure all pollers are being unregistered and
all I/O channels are being released.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ifb854066a5259a6029d55b88de358e3346c63f18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
When gathering test completions original grep went over all
files in repository recursively. In some cases it took
way longer than required.
This patch limits searches only to rootdir and test directories.
References #1068
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ice0bba25f2fad62516226a7b045d12b6614bead5
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1089
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
A previous fix for miscompare had a slight issue with the scenario
where we chose an offset and then discover that it's already taken
because we've wrapped to this location before the previous IO
completed. In such case, we intended to bump the offset to just go
to the next block however we only bumped the local variable so the
next IO submitted will overwrite the previous.
The fix is simply to use the previously incremented target->offset
and increment it again for the next IO.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I26661eb0631ac50cc4f86f42f1d1789d297e204d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1250
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
blob_delete_snapshot_power_failure() test always attempted
snapshot deletion until the snapshot did not open.
Which meant that on bs reload after dirty shutdown,
the snapshot was in unrecoverable state.
UT did not verify delete call beyond that point.
Next patch will stop after snapshot is unrecoverable,
AND the spdk_bs_delete_blob() returned success.
This patch makes it easier to recreate same starting
conditions after snapshot did not load.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7e14e8dadaaef4aa3287ebd376465253466b2362
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1162
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This reverts commit ea5ad0b286.
This code is moving from the nvmf target to the posix sock
layer in this series.
Change-Id: I333bdf325848e726ab82a9e6916e1bbdcd34009c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/446
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add qd=1 test in per-patch test.
Add qd=32 in nightly test.
That can find some issues in corner case.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic7e33812facaa031af52ba0217d310bf0040473c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1240
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We should wait until login fully performs before fio tests
to avoid intermittent failures.
Change-Id: I55862f5e9c7b9fbdf225036caed92c0ac935f1b1
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1251
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
On Fedora 30 we have noticed VPP 19.04 related issues:
1) Error values returned by vppctl in non-interactive mode
are not relevant to the success/fail of command.
Vppctl ALWAYS returns 0, so "-e" bash option is unable
to detect any errors.
2) We have intermittent pipefail errors (error 141) returned
by vppctl on disconnect from vpp, even though commands are
executed succesfully.
Change-Id: Ie22ea24f7e81017089b899111724d338eeb81113
Signed-off-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1214
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Enables us to test randomized data against the iSCSI target interface.
Change-Id: I56bd5bcd936b92ba152d4d5678d7124b3165c03c
Signed-off-by: Hailiang Wang <hailiangx.e.wang@intel.com>
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/509
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Now that a namespace can be depulated asynchronously now, the NVMe bdev
module should also be finalized asynchronously, after all namespaces and
controllers are deallocated.
Change-Id: Ic082fec8e31e9bd5ee1c698cd8dfca9f248776d3
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1198
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This patch adds the ability for a namespace to be depopulated
asynchronously. Currently both regular NVMe namespaces, as well as the
OCSSD ones are depopulated synchronously, but it'll be changed in the
upcoming patches.
The nvme_bdev_ctrlr.ref is now not only tracking the number of bdevs
created on that controller, but also the number of populated namespaces.
Change-Id: I7b112d9b0d41739f3dc7d427e9da340843128c54
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1197
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Add thread_count to struct spdk_reactor to count number of threads
per reactor. This number will be used in the next patch to know
if all threads are idle or not for each reactor to support CPU
power saving.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4f7cc5a6b78d85e9f8d0b539c60058c13e282759
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1169
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
ftl fio tests should not kill spdk_tgt process on exit.
Change-Id: I541e84002202a5f01bd5a2dffe31a60e02da30e9
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1179
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Since the OPAL here is just for NVMe device, so we don't need to use dev_handler as common
handler, just rename it to spdk_nvme_ctrlr. And we don't exit the initialization if
OPAL construnction had a failure. Also move the timeout initialization to construct().
Change-Id: I11f0aea961eaa3da0c6253eb03d0227f7e7e5f11
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1101
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove if/exit steps from rbd.sh and move the condition
to parent script iscsi_tgt.sh.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I86c9c659e0f8b4f544296e2ef8a861b25fd4f424
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
$ time ./test/lvol/lvol2.sh
Without rpc daemon (before):
real 0m52.195s
user 1m29.316s
sys 0m7.660s
With rpc daemon (now):
real 0m12.452s
user 0m13.505s
sys 0m3.798s
Note we only have about a half of lvol tests ported to bash atm,
so this time difference would only grow.
Change-Id: I28ec0b92f19e0c7fd48392a72f32535c1106b8be
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1058
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add rpc_cmd() bash command that sends rpc command to an
rpc.py instance permanently running in background.
This makes sending RPC commands even 17 times faster.
We make use of bash coprocesses - a builtin bash feature
that allow starting background processes with stdin and
stdout connected to pipes. rpc.py will block trying to
read stdin, effectively being always "ready" to read
an RPC command.
The background rpc.py is started with a new --server flag
that's described as:
> Start listening on stdin, parse each line as a regular
> rpc.py execution and create a separate connection for each command.
> Each command's output ends with either **STATUS=0 if the
> command succeeded or **STATUS=1 if it failed.
> --server is meant to be used in conjunction with bash
> coproc, where stdin and stdout are named pipes and can be
> used as a faster way to send RPC commands.
As a part of this patch I'm attaching a sample test
that runs the following rpc commands first with the regular
rpc.py, then the new rpc_cmd() function.
```
time {
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "0" ]
malloc=$($rpc bdev_malloc_create 8 512)
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "1" ]
$rpc bdev_passthru_create -b "$malloc" -p Passthru0
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "2" ]
$rpc bdev_passthru_delete Passthru0
$rpc bdev_malloc_delete $malloc
bdevs=$($rpc bdev_get_bdevs)
[ "$(jq length <<< "$bdevs")" == "0" ]
}
```
Regular rpc.py:
```
real 0m1.477s
user 0m1.289s
sys 0m0.139s
```
rpc_cmd():
```
real 0m0.085s
user 0m0.025s
sys 0m0.006s
```
autotest_common.sh will now spawn an rpc.py daemon if
it's not running yet, and it will offer rpc_cmd() function
to quickly send RPC commands. If the command is invalid or
SPDK returns with error, the bash function will return
a non-zero code and may trigger ERR trap just like a regular
rpc.py instance.
Pipes have major advantage over e.g. unix domain sockets - the pipes
will be automatically closed once the owner process exits.
This means we can create a named pipe in autotest_common.sh,
open it, then start rpc.py in background and never worry
about it again - it will be closed automatically once the
test exits. It doesn't even matter if the test is executed
manually in isolation, or as a part of the entire autotest.
(check_so_deps.sh needs to be modified not to wait for *all*
background processes to finish, but just the ones it started)
Change-Id: If0ded961b7fef3af3837b44532300dee8b5b4663
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/621
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Added new setup/cleanup functions for a suite of
unit tests that use a particular blob through out the
tests.
This simplifies the contents of particular UTs,
and brings forward focus of each UT.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib7d69b90fcbe8e6a0ba303475fcbaeb90fa110a7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/945
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some of the unit tests were only closing a blob,
without deleting it at the end of unit tests.
This is valid behaviour, but to later simplify
the setup/cleanup - a delete blob was added.
This change was made to unit tests where,
it was not focus of particular UT.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I7e338ba6fcb63af26658e8968971a6d56f70807b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1203
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Operation of closing and deleting a blob is common
throughout the tests.
This patch creates helper function ut_blob_close_and_delete(),
to do exactly that with the right asserts.
Throughout the UT this function replaces all instances where
blob is closed and deleted, when it is not the subject of
particular unit test (focus is on other functionality).
It will allow to later use it in setup/cleanup functions
for UT suite - similar to bs init.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic56594da8cd4c442b62890d62961b44771059679
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1202
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Operation of creating a blob (with or w/o opts),
then opening it through out the tests is quite common.
This patch creates helper function ut_blob_create_and_open(),
to do exactly that with the right asserts.
Throughout the UT this function replaces all instances where
blob is created and opened, when it is not the subject of
particular unit test (focus is on other functionality).
It will allow to later use it in setup/cleanup functions
for UT suite - similar to bs init.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ia541b855d154503f824bfa3909bcfeac649c5853
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1201
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Always call API on blobid that was received from blob
create, instead of relying on global one.
Where necessary added declaration and assignment.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I3529b4d5e86c1301bb64268029a57873f9f600cb
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/944
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Always call API on pointer that was received from blob
open, instead of relying on global one.
Where necessary added declaration and assignment.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I15531111201d071c471f5be79ce18ff508631677
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/943
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
A lot of unit tests require only creation of a blobstore
then unload it at the end.
This code can be made common and invoked automatically by
CUnit with CU_add_suite_with_setup_and_teardown().
Those functions are called before and after each test in suite.
This should simplify the unit tests by removing the common
code.
Following patches will add further suites with different
setup/cleanup to reduce common code even more.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I984cde2381f4461e188e06050355024a88ebfca9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Next patch in series adds setup/cleanup functions
that use g_bs for its operation.
Particular unit tests should not leave the g_bs
unassigned, if cleanup is supposed to unload it.
It applies to helper functions to reload/dirty_load.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I6e022b6c762981c2c70ebf31f4981a17f54f3591
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1182
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some of the unit tests initalized bs opts,
event if they were left unmodified.
There is no need to perform this operation,
as spdk_bs_init() can accept NULL as bs_opts parameter
to just initialize default values.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Iacea1fa9d53796b8c359b611092cc63c6bce4094
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1181
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch decreases the compile time when particular test
category is not executed by tests.
Added skipping the 'examples' dir during verification
of scanbuild scanned files. Only when examples were not
compiled.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I41e7b9d18913fd02e2b6cbe44f933ab2e0371d28
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1172
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Add the error print if there is still remaining_size in
order to provide more meaningful debug info.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7b15c9c9a630ea7ecb2d3191b73c9c99f7febf31
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1189
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There was no sync between the start of a w/r/v operation at
a specific block with the previous completion. This resulted
in data miscompares either because the initial Q depth was
sized such that a disk wrap need to occur to complete it or in
the event that an IO takes longer to complete than when bdevperf
loops back around to that offset.
Fixes#1208
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: Ifa55da54246735e7b603fafd34718965b0f27b94
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1180
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To provide some more clues when this happens.
Signed-off-by: paul luse <paul.e.luse@intel.com>
Change-Id: I098aaea906a1057e63f07c40a1ebb346a283983d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1070
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
At startup, use number of created io_target groups to detect completion
and move to the next step. By returning completion message to the
master thread, we can avoid using any atomic operation.
At shutdown, we can use spdk_for_each_channel() conveniently. Put
voluntary spdk_thread_exit() calls into the callback to
spdk_put_io_channel().
To maintain the original behavior, number of threads created is
equal to the number of cores that SPDK app uses.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I92ca4b1c1e8da0f45b47367bc2387701f4a9742f
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/890
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Output performance dump per SPDK thread by using
spdk_for_each_channel(). This change is safe even when shutdown
case because spdk_for_each_channel() is serialized if it is
called on the same thread.
Keep lcore information because it is still valuable to know which
lcore each thread ran on for.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I996a4ca2c787d04672743b09a9415145cd8d0171
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/645
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
subsystems
This is optional and most transports will not implement it.
Change-Id: I51e0f1289b0e61a8bdb9a719e0a2aae51ecb451c
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jacek Kalwas <jacek.kalwas@intel.com>
In the next patch a new transport call will be added to notify
transports of subsystem->listener associations. The operations the
transports may need to perform there are likely asynchronous, so make
this top level call asynchronous here in preparation.
Change-Id: I7674f56dc3ec0d127ce1026f980d436b4269cb56
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/628
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
If unit tests are not required, add option to disable them.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I387ec043fd47d3033726a51ab673752a521d45c0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1171
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This was recently made asynchronous to support virtualized transports.
However, we're moving to add a new call to associated a listener with a
subsystem to transports and the operation that needed to be asynchronous
will actually be performed there. For simplicity, make this synchronous
again.
Change-Id: Ie98136a19c58f0f9bba0d140476de3bbb38e12d7
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/881
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch makes bdevperf_construct_targets_tasks() asynchronous
by using spdk_for_each_channel().
The next patch will make performance_dump() asynchronous even when
shutdown case by using spdk_for_each_channel().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I1ebf39fe89a944d977d6f1808cf8607e8f477758
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/644
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This is a preparation to make bdevperf_construct_targets_tasks()
asynchronous by using spdk_for_each_channel() in the next patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I76c827550b2920abcba14abd7f15a3111ad10d39
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/643
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Squash changes for _bdevperf_construct_targets() and
bdevperf_free_targets() into a single patch to shrink the
patch series to reduce the burden of reviewers.
The pupose of the whole patch series is to move io_target from
core based to I/O channel based, and create SPDK thread per I/O channel.
It was not possible to create SPDK thread per core and then associate
target group with I/O channel as long as I tried.
So this patch moves io_target from core based to I/O channel based.
The later patch will create SPDK thread per I/O channel.
Each core has default reactor thread for now and so we can use
spdk_for_each_channel() even when we do not create and destroy SPDK
thread per target group yet.
The following is the detailed explanation:
_bdevperf_construct_targets():
Add a context for _bdevperf_construct_targets() to use
spdk_for_each_channel().
If g_every_core_for_each_bdev is false, set the target group to the
context and create target only on the group which matches the passed
group. If g_every_core_for_each_bdev is true, create target on all
groups.
Only the master thread can increment g_target_count. Hence hold
created number of targets temporary on the context and add it at
completion.
As a result of these changes, spdk_bdev_open() is called on the
thread which runs I/O to the bdev.
Hence bdevperf_target_gone() doesn't use message passing, and
bdevperf_complete() calls spdk_bdev_close() before sending
message to the master thread. Additionally, unregister pollers
directly in bdevperf_target_gone().
These changes also fix the potential issue that spdk_bdev_close()
would be called on the wrong thread if spdk_bdev_get_io_channel()
fails in bdevperf_submit_on_group().
bdevperf_free_targets():
Free each target on the thread which created it by using
spdk_for_each_channel().
This will make possible for us to use spdk_for_each_channel() for
performance dump even for shutdown case because
spdk_for_each_channel() is serialized if it is called on the same
thread.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I4fcdb1024adf4704d3c59215da5669dfdc6cca1b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/641
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This patch adds better check if the xattr was removed.
It will identify potential bugs when first md sync
takes precedence over the second md sync.
As per suggestion in
https://review.spdk.io/gerrit/c/spdk/spdk/+/774/6/test/unit/lib/blob/blob.c/blob_ut.c#7655
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I463f2455614ef11cc1512dc2fb1972ba1f024337
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1109
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Operation of dirty shutdown of blobstore and reloading
it occurs often enough in UT to provide a common function
to perform it.
Added ut_bs_dirty_load() to facilitate this.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I0079dfabd64eaec6495db02fe200be1d6116f0c7
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1092
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Operation of unloading and loading blobstore
occurs often enough in UT to provide a common function
to perform it.
Added ut_bs_reload() to facilitate this.
Couple occurences in this patch actually fix
test cases where mistakenly opts were not passed.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib46ed395cd134feaa540e00a334ae861872b3ef4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1091
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Couple unit tests were still refering to g_bs pointer,
rather than the one local to particular UT.
This patch fixes this.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If343eb561a48c4547d499139d76e1db6b2d7f3bf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1090
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If the hugepage we use is 2MB, the numble of hugetlbfs will exceeds
the limit of 8. we must pass "-g" to vhost_fuzz app, which will pass
"--single-file-segments" to DPDK to create a single non-physically-
continuous hugetlbfs file for all its memory.
Here we pass "-g" to vhost_fuzz app which make the script work under
both 2MB and 1GB hugepage.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: I0287584c54f03a379957d6885c23e21a1fd10c4b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1148
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Currently we will free the cache buffers in the file R/W
data path, however we can start a thread to do the cache
buffer reclaim regulary, so that we don't need to free
the cache buffer in the Rocksdb thread context. By
doing this, we can also remove the global cache buffer
lock in following patches.
Change-Id: Icb0fbc49baecd1e9d86a5fcfe400758dfc3c53a2
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/941
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
GCC9 complains:
./db/version_edit.h:134:71: error: implicitly-declared "constexpr
rocksdb::FileDescriptor::FileDescriptor(const
rocksdb::FileDescriptor&)" is deprecated [-Werror=deprecated-copy]
From what I see this can be fixed by explicitly
defining some constructors and assignment operators,
even setting them to `= default;`. I didn't dig into
this further, just ignore the warning for now.
Change-Id: Ia0ee0cc5fc1dce36f7098959d383b08855a825df
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1082
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove if/exit steps from calsoft.sh and move the condition
to parent script iscsi_tgt.sh. This still to run iscsi_tgt.sh
on systems which don't have Calsoft installed but still allows
CI to detect missed tests thanks to autorun_post.py.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I0eb186fe80b377f0c023774adf8ff321af7dfa81
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1075
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Add function to print warning with optional message
in case we'd like to skip a test.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: Iacb1031aac0e17ce80327ca826c51fb2b99a6be0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1080
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
No need to exclude the autotest_common.sh twice when
creating test list.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ice7be31a9d7d284dd411ebfd3854e075b37c0275
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1088
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
To avoid the starnge formatting, typedef has been used. But this comment
is hard to get the meaning. So stop breaking after return type for this case.
The strange formating is
struct spdk_scsi_dev *
spdk_scsi_dev_construct(const char *name, const char *bdev_name_list[],
int *lun_id_list, int num_luns, uint8_t protocol_id,
void (*hotremove_cb)(const struct spdk_scsi_lun *, void *),
void *hotremove_ctx)
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I20c30b225b3b96fa9207b4a89e3210c8a97fb1d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1050
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
It was removed for other/negative.sh test.
There is no need to keep it more for one scripts with test
as vhost configuration can set by series of rpcs.
Change-Id: I86937a5f38641f5ce48c00836e050623c90bdd27
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/915
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Need one more malloc bdev.
Change-Id: I9884829e1683bfa0e9653f2edbb020d002b7b060
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1055
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Rewriting test cases:
- tasting_positive
- tasting_lvol_store_positive
- tasting_positive_with_different_lvol_store_cluster_size
These three python test cases were merged into one test,
as there was a lot of similarity between them.
Change-Id: Ie68568e2b6b9e574917b6b350e96b0f42c999c95
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/683
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add raid5 module and unit tests. Use './configure' with option
'--with-raid5' to enable it.
Change-Id: I9f07da8c3567fa65499444899c899adaa2e29550
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/855
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
If we did not configure with "--enable-debug". it will
trigger the compliation failure since this function is
not defined.
Change-Id: Ia1795da736be55d4dd1418a2e74edefff7797f11
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1097
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Michael Haeuptle <michaelhaeuptle@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In case something goes awfully wrong with the test which calls this
particular function, e.g:
https://ci.spdk.io/results/autotest-per-patch/builds/4787
the CI's autotest runs may be blocked for max of 15 minutes before
failing the build. Instead, introduce internal timeout for the
routine itself (default of 30s) and fail the test sooner when it
expires.
Change-Id: I2c792c1781987e80e34c1fa19ec3eef43c25e38a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1026
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
We do not want to skip tests, especially that the
'if' statement is inside the test script.
So even though the test wasn't actually ran it still
is reported as executed because "spdk_nvme_cli.sh" returned
with rc=0.
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Change-Id: I89c553aebcc1346f8f584dd86eeae1ca146e7340
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/980
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Michal Berger <michalx.berger@intel.com>
When running unittest_thread in fedora29 with memcheck, there is
error "Conditional jump or move depends on uninitialised value(s)"
in for_each_channel_unreg test.
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: I38abf4c70ff513e39232b83357d571dded8f02c3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1072
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In case the random string beggins with `-` (still a valid ascii char
that nvme supports) the rpc.py arg parser will treat it as an
additional argument instead of actual subsystem value.
To mitigate, escape the `-` in case it's the char that starts the
string.
Fixes: 1240
Change-Id: I07bd8134fb9fc16234e72e9ebd27e2b6b90d6b62
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1054
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Replaced single global write buffer with the per-io_channel write
buffers. This means that the "rwb" module and all of its references
were removed and replaced with the recently added interfaces.
Change-Id: Idc899d3a4d63a8a2bede1ac26549ed06e9a2e784
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Added queue responsible for keeping track of full, ready to be written
batches. A batch might be put on this queue in case it'd already been
filled, but could not be written out due to lack of resources or it was
written out, but failed and needs to be resent.
Change-Id: Iba49cd359425300d21b8100f13f17189e99d4c7c
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Two functions were added:
- ftl_get_addr_from_entry() returning an address pointing at a given
entry
- and it's inverse, ftl_get_entry_from_addr(), returning a write buffer
entry for a given address
Change-Id: Iea1e2e59f240f50183fdb549280a0f0b722efbef
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/906
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch adds the ftl_batch strucutre, which describes a single batch
of data to be written to the disk. It's comprised of multiple write
buffer entries (the actual number depends on the write unit size of the
underyling device).
Additionally, a function responsible for filling out a batch was added.
It iterates over available IO channels and dequeues submitted write
buffer entries until a batch is completed. The IO channel queue is
shifted, so that each time the function is called a subsequent IO
channel is used first, which guarantees that all channels are treated
fairly.
Change-Id: Ie61d8c6cb51d5c5175540c975447bc27590c5cb4
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/905
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Added functions responsible for acquiring/releasing write buffer entries
from the per-io_channel caches. They're also in charge of limiting user
writes by reducing the number of available entries to the user.
Change-Id: I23adfe36065139036f9b72a016e34fbf6eb29230
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/904
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The IO channel pointers are now stored inside an array of the device
they belong to. Once write buffer entries are tied to IO channels,
it'll provide a method for dereferencing an entry from its address.
Change-Id: Iaf401525eb0f5af8dc6047a1dc8bae11b56761d7
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is the first patch of a series that replaces single global write
buffer with per-io_channel buffers. This change is intended to improve
performance for multithreaded workloads.
This patch changes the way the ftl_io_channels are allocated by only
keeping an ftl_io_channel pointer inside spdk_io_channel's context. It
allows for delaying IO channel destruction, which in turn allows the FTL
to iterate over all exisiting IO channels without locking.
Change-Id: I5e0cab8043a2b5f747e971dd3d65ed2546c8cf26
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/900
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Follow the idea of bdev_get_iostat in module/bdev/rpc/bdev_rpc.c.
Add a global variable g_bdev_count and then set it to 1 as sentinel
value in bdev_construct_targets().
Subsequent patches will make _bdevperf_construct_targets() asynchronous.
Then bdevperf_construct_targets() will be truely asynchronous.
This patch is too small to be an independent patch but keep to
hold previous review result.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I49d0b6e6d61df65d4eb31c402f98cc4300482e20
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/639
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add a flag resched to check if reschedule operation is requested
to struct spdk_lw_thread. Add _reactor_resquest_thread_reschedule()
to set the resched flag, and add it to the case SPDK_THREAD_OP_RESCHED
in spdk_reactor_thread_op(), and return true in the case
SPDK_THREAD_OP_RESCHED in spdk_reactor_thread_op_supported().
Then _spdk_reactor_run() checks if the resched flag is true for each
thread. If true, set the resched flag to false, and remove the
thread and call _reactor_schedule_thread(). Add continue to avoid
use-after-free issue for both reschedule and terminate cases.
This idea follows voluntary thread termination and will remove our
worries for all complicated rare cases.
Add unit test case to verify this update.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I656872d32dbb469ae70f771cd0419a77236bfe18
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/500
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is necessary to avoid leaving the machine in a bad state between
test runs.
Change-Id: I2c68d2dc88f0f9f4cab099564d25a3e21eb5671c
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1027
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Since ftl supports only one core thread ftl_thread
structure is not needed anymore.
Change-Id: I66eda9249d74b3eff0c4473dcd0aba4a6135e296
Signed-off-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/548
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This reverts commit 29e9fdc857.
Nightly tests after merging the reverted patch show that it does not
pass in current state. It affected the per-patch, since the new
tests weren't added to skipped_tests list.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: If8a58cbe9ecd0e58f20c0a9ee844bc9a8ee046a3
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1045
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With this change user can defined test cases that he wants to run.
It could enable to run hotremove test cases per-patch and nightly.
Change-Id: I6876f39886a347ada4dd548a2f45b99a37207c3e
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/768
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
It comes up on failed fio runs and bloats the log.
Change-Id: I8dd0196bfc98b3ee888aca0def83f0961fbc1197
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1010
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
The goal of this test is to make sure that proper parts of the lib
fail as they should. These particular tests focus on:
- spdk_rpc_nvmf_create_subsystem(): model and serial number checks
Change-Id: I504279d08b192d6dfe37a8a601eda44084b596d4
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/693
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Add tests for the following features:
- SPDK_NVME_FEAT_TEMPERATURE_THRESHOLD (4),
- SPDK_NVME_FEAT_ERROR_RECOVERY (5),
For Temperature Threshold feature the validity of the THSEL and TMPSEL
is covered as described in the NVMe spec (1.4):
"Figure 279: Temperature Threshold – Command Dword 11"
For the Error Recovery feature the validity of the DULBE is covered
as decribed in the NVME spec (1.4):
"Figure 280: Error Recovery – Command Dword 11"
Random value is selected for the lsb in the cdw11 (0x42).
Change-Id: Ia57ab4d79439ec315ddc9bbfdad8400aa926062a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/692
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
SPDK_AUTOTEST_DEBUG_APPS - if set to 1, all applications will be
executed with --log-flags=all
This should increase, to some extent, coverage of each application.
Change-Id: I1fc82a837abb7e94bda55f47056a120bd9be40d7
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/691
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Since there's more than one fuzz app covering different areas, rename
FUZZ_UP to VHOST_FUZZ_UP to make the type of the app clear right off
the bat.
Change-Id: I7730f1e14895d9221ec76dea0f53b5054a97be1c
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/978
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Instead of declaring each app in the actual test, source their default
declarations from a single location. Additionally, use them as arrays
now instead for easier cmdline management.
Change-Id: I0ea39403f070dc57987065ebb800e91c35de643a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/690
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Currently, this particular package is not available in fedora 31's
repos, thus don't exit the setup if its installation fails.
Change-Id: I56852ed172c95b23c92e25b1cec391b4e909f2bd
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/936
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Since '' are placed within "" they are treated as literal part of the
argument passed to configure. Due to that, configure fails to run cc
since all -W flags are treated as one.
Change-Id: I69e182f308628cc5b63bd363d3a47cf87336a59a
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1024
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Remove the prefix "spdk" from spdk_reactor_schedule_thread(), add
spdk_reactor_thread_op() and spdk_reactor_thread_op_supported().
For SPDK_THREAD_OP_NEW, spdk_reactor_thread_op() calls
_reactor_schedule_thread() and spdk_reactor_thread_op_supported()
returns true.
Then replace spdk_thread_lib_init() by spdk_thread_lib_init_ext()
with spdk_reactor_thread_op() and spdk_reactor_thread_op_supported().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I232a3b2c6bcaf4d86b0dd3cefacd3e47eadda6d8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/968
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add enum spdk_thread_op and two function typedefs spdk_thread_op_fn
and spdk_thread_op_supported_fn.
The first operation type of enum spdk_thread_op is SPDK_THREAD_OP_NEW,
and it is used as an alternative to spdk_new_thread_fn.
Add global variables, g_thread_op_fn and g_thread_op_supported_fn, and
then add spdk_thread_lib_init_ext() to initialize these.
spdk_thread_lib_init() requires both of thread_op_fn and
thread_op_supported_fn are specified or not specified.
spdk_thread_create() calls g_thread_op_fn() with SPDK_THREAD_OP_NEW
if g_new_thread_fn is NULL, g_thread_op_supported_fn is not NULL,
and g_thread_op_supported_fn(SPDK_THREAD_OP_NEW) returns true.
Update unit test to test these addition.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I56db903f62437f6ff3198248ffc5dede396c22bc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/967
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Add an unique ID for each created SPDK thread. Use a single 64 bits
variable, g_thread_id, and guard its update by the global mutex
g_devlist_mutex. For our safety, further thread creation is not
allowed if g_thread_id rolls over, and request user to restart SPDK
application.
Besides, as a minor update, move the debug log down and add ID to it
in spdk_thread_create(), and ID is added to thread_get_stats RPC and
framework_get_reactors RPC.
The thread ID will be used to set the cpumask of the running thread
to the specified value in the subsequent patches.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ic09f11d4c7175c3b89acba6a42e76063acd0d1a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/498
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is a warning triggered when holding ref to const obj and passing
to these getters.
Signed-off-by: Jacek Kalwas <jacek.kalwas@intel.com>
Change-Id: I2c7b4ea0d325d84d66923fc524273ea44a3a311b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/997
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
With the JSON configure, the base device will be opened on the
same thread (RPC thread) to handle the JSON operation. Later the
virtual device upon the base device can be opened on another
thread. At the time of virtual device destruction, the base
device is also closed at the thread where opening the virtual
device, it is actually different than the original thread where
this base device is opened through the JSON configure.
Add a thread here to record the exact thread where the base
device is opened and then later route it back to handle the base
device close operation.
Change-Id: Ib95e8d190bd87158ae1ecc6698da95ccc4ba9579
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/992
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
In the autotest, when calling kill_stub() function, there is error log
like this: "Device 0000:83:00.0 is still attached at shutdown!", so it's
better to detach the controller when exit the stub process.
But after call spdk_nvme_detach() in the stub process, there is another issue:
1. NVMe stub running as the primary process, and it will send 4 AERs.
2. Using NVMe reset tool as the secondary process.
When doing NVMe reset from the secondary process, it will abort all the
outstanding requests, so for the 4 AERs from the primary process, the 4
requests will be added to the active_proc->active_reqs list.
When calling spdk_nvme_detach() to detach a controller, there is a
assertion in the nvme_ctrlr_free_processes() at last to check the
active requests list of this active process data structure.
We can add a check before destructing the controller to poll the
completion queue, so that the active requests list can be flushed.
Change-Id: I0c473e935333a28d16f4c9fb443341fc47c5c24f
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/977
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
There are synchronous security send/receive APIs defined in nvme.h,
however, we still need the asynchronous APIs so that we can make the
OPAL library can be used in asynchronous way. As the asynchronous APIs
are already defined in nvme_ctrlr_cmd.c, so just export them to public
APIs.
Change-Id: I5646f342a4bf70faad37daa956476f05a1327bcc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/675
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Some distro installations don't provide the time package by default.
Since Bash is capable, use its time instead.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I8ca31e233c23d9c89be6afba29affe45f3f9882c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/961
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
If this call fails, for whatever reason, $ROCKSDB_CONF won't be
removed.
Change-Id: I6fff996b04415fc760d3593c0f628d2631ce96ba
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/960
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Since both stdout and stderr of the db_bench run is redirected to a
file, xtrace won't write out anything of value in case said run fails.
Example:
https://ci.spdk.io/public_build/autotest-per-patch_4071.html
To avoid looking into the file directly, try to locate last .txt that
was written out and dump its contents to stderr to increase the
visibility of what might have caused the failure.
Change-Id: Ic4873626e979130f2722a4f2d5266d93bc2bde76
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/959
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
When running unittest_nvmf in fedora29 with memcheck, there are
many errors about "Conditional jump or move depends on uninitialised
value(s)". The failed tests are:
in ctrlr_ut:
test_reservation_notification_log_page
fused_compare_and_write
in ctrlr_bdev_ut:
spdk_nvmf_bdev_ctrlr_compare_and_write_cmd
Signed-off-by: Richael Zhuang <richael.zhuang@arm.com>
Change-Id: Ib1e6a744e86876c15ee53206909364e853574dd1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/965
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
while the size of namespace is changed,
the resize event will be notified.
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Signed-off-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Signed-off-by: Allen Zhu <allenz@mellanox.com>
Change-Id: I5d85f17df898dc21c0ae1eb9f529dcb624a457ac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/849
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Always call API on pointer that was received from blobstore
initialization or load, instead of relying on global one.
Where necessary added declaration, assignment and asserts.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ic4198ac984c13a8b77428deaa32ce9864e6750c1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/942
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
CUnit provides a helper macro CU_ADD_TEST() that
simplifies using CU_add_test() function.
Test name no longer needs to be provided,
instead test is named after test function name.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I9f5d9e0d8e72ab36b2a5c04e33c336e6c0a1fa6a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/931
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Failure to prepare CUnit for tests is always a fatal error,
and application exits.
Most test managment functions in CUnit set some CU_ErrorCode,
that can be retrived by return code from a function or CU_get_error().
Thus usual structure of UT in SPDK checked every output from every
test managment function.
There is a helper function CU_set_error_action() that when set to
CUEA_ABORT, will abort the application run with proper error return code.
Along with nice error message.
For example if one were to add same UT twice:
"Aborting due to error #32: Test having this name already in suite."
Application return code set to 32.
Using CU_set_error_action(CUEA_ABORT), removes the need for error checking
on test managment functions in CUnit.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ida7de5e040b714509e79957d47a006ee518a42b8
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/930
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Expands blob_simultaneous_operations to cover case
when second md sync is perfomed without waiting for the first
one to complete.
The blob state is forced in UT, but in normal usage could be
changed by modifying xattr, allocating thin clusters or other.
Related to #1170
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I880d289cdf957d4513c080efdcb7a5d8c6b3b447
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/775
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This new UT is checking validity of md sync being run
along another md sync with changed metadata.
At this time added case where first md sync is being
interrupted by removal of xattr with second md sync.
This interruption is perfomed at increasing number of
poller executions, until the number is enough to
complete first md sync.
There are two expected states of used_md_pages array,
either with xattr or without. The state is verified
after md syncs.
This UT will be expaned in similar manner by other
operations (than xattr) that casue changes in persisted metadata.
Related to #960
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I251dca92ffc3080d8dc503a7f1ff342aa59adef9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/774
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Making use of recently added utility to poll exact number of times.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I23a9dc702c899285626522ace8ec77a9ba0f7757
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/773
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Right now functions poll_thread() and poll_threads(), polled
always until there were no further messages to process.
This allows to put next operation to execute only after
previous one completed.
Function poll_thread_times() allows to poll certain thread
for exact number of executions. If 0 is passed to max_polls,
then this function executes single message and all pollers,
until no messages are left.
With this change it is possible to only run a thread
selected number of iterations. Allowing to add another operation
without first one finishing.
It will become useful in blobstore UT, where two operations
will be executed with slight delay between them.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I4a6537695389f30130ea2fd2fd43d7b2cb2dea39
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/772
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
$rpc_server is hardcoded inside the function and can't
be empty, so remove the check for that.
Change-Id: Ic819089eb113b14a7c2407cd5ce882bcdee044bb
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/522
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
To make room for other raid module unit tests.
Change-Id: Icf8b8ff0c9051ccb4c7ebd784807370f8be1a8fb
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/853
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is a duplicate of test_hotremove_lvol_store_base,
previously known as test case 301.
Change-Id: I2e49652a0d94fc32f8193f724a254a50484844cc
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/682
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Firstly, change unmap suppor and I/O size checks to do once per
bdev. It is enough to check if unmap is supported and check if
I/O size is multiple of data block size once per bdev. Hence move
these checks from bdevperf_construct_target() to
_bdevperf_construct_targets().
Secondly, use calloc() to remove unnecessary zeroings in
bdevperf_construct_target().
Thirdly, factor out getting next io_target_group from
bdevperf_construct_target(). This is a preparation to make
bdevperf_construct_target() asynchronous by using
spdk_for_each_channel().
These may be better to break-up but these are already included in
the long patch series. So to reduce the burden of reviewers,
squash these into a single patch.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I2cb94c8aa2b6b1a1b9e9a04da533e1fd093f8f29
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/640
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Factor out constructing multiple targets for a single bdev from
bdevperf_construct_targets() into an new helper function
_bdevperf_construct_targets().
Then change the return type of bdevperf_construct_targets() to void
and continue creating targets for subsequent bdevs even if failing
for any bdev. Additionally, remove a couple of comments in the source
code to avoid misunderstanding.
These changes will make us easier to use spdk_for_each_channel()
in bdevperf_construct_targets().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: I3363931749b863c8de619939939d401f14e43d15
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/638
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Creating targets, creating tasks, and then running I/O is the actual
ordering of start-up. So adjust ordering of function calls to make
easier us to follow.
Change the return type of bdevperf_construct_targets_tasks() from
int to void, and call bdevperf_test() at the end of
bdevperf_construct_targets_tasks(). Then replace bdevperf_test() by
bdevperf_construct_targets_tasks().
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Id1396ff4ba199778300f5ddaf79db5f8f2e0ccb6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/642
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Move bdevperf_test() into bdevperf_construct_targets() from
_bdevperf_init_thread_done() and rpc_perform_tests(). Following the
last patch, this consolidation will make the code a little cleaner.
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Change-Id: Ided4653941f45ff6ac8edbea504560cc8a9fb5a0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/637
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Make sure that $rootdir and $testdir are accessible in the sourced
environment. This is to follow the convention seen throughout the
entire repo and make sure that nothing that depends on these paths
fails in case they are missing.
Change-Id: Ie20754fc7aca7aab3636cb022499e9ff2f2dd30b
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/777
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Allow ftl_io initialization with a iovec array instead of a single data
pointer. It'll make it possible to use the vector version of the IO
commands.
Change-Id: I34c1e398cea681f59321605e081366785aa29128
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/894
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Wojciech Malikowski <wojciech.malikowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Maciej Szczepaniak <maciej.szczepaniak@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
