Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie32a1bb144c239b923b5cbb9e608a7dfc9c05208
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/456076
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Maciej Szwed <maciej.szwed@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In Fedora release 28, plug in nvme device and run setup.sh,
the uevent is like this:
UDEV [1060.112118] add /devices/virtual/vfio/81 (vfio)
ACTION=add
DEVNAME=/dev/vfio/81
DEVPATH=/devices/virtual/vfio/81
MAJOR=509
MINOR=1
SEQNUM=8544
SUBSYSTEM=vfio
USEC_INITIALIZED=1060111894
UDEV [1060.122089] bind /devices/pci0000:d7/0000:d7:00.0/0000:d8:00.0 (pci)
ACTION=bind
DEVPATH=/devices/pci0000:d7/0000:d7:00.0/0000:d8:00.0
DRIVER=vfio-pci
ID_MODEL_FROM_DATABASE=PCIe Data Center SSD (DC P3700 SSD [2.5" SFF])
ID_PCI_CLASS_FROM_DATABASE=Mass storage controller
ID_PCI_INTERFACE_FROM_DATABASE=NVM Express
ID_PCI_SUBCLASS_FROM_DATABASE=Non-Volatile memory controller
ID_VENDOR_FROM_DATABASE=Intel Corporation
MODALIAS=pci:v00008086d00000953sv00008086sd00003703bc01sc08i02
PCI_CLASS=10802
PCI_ID=8086:0953
PCI_SLOT_NAME=0000:d8:00.0
PCI_SUBSYS_ID=8086:3703
SEQNUM=8545
SUBSYSTEM=pci
USEC_INITIALIZED=1060121805
Have tested several kernel versions such as v3.10, v4.10, v4.15, v4.19.
We didn't see an event which is like this:
ACTION=add
DRIVER=vfio-pci
Change-Id: I7299a2fb4d634edaa6bab3412ee8f363f66aae6f
Signed-off-by: JinYu <jin.yu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452053
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is the same intention as the patch for iSCSI in this series.
This change will be helpful to extract common part into a specific
helper library if necessary in future.
Change-Id: I1ce36b424ff2afb85f998149f4ef0d7153290802
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455621
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Recently DIF library refined SGL create operation by unifying
size and used count into unused count. This patch applies the
good practice in DIF library to create SGL in NVMe/TCP.
The next patch refines names of related function and variables
to be consistent in NVMe/TCP.
Change-Id: I1e73310c0e3650ede53672d76071a6c37dba82c1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455473
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This avoids dereferencing the request to get the qpair
in cases where we already know the qpair. Adding a new
variant instead of just modifying nvme_free_request()
since there are 72 calls to this function and I don't
want to change all of them.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifd6fd964e546bcd71ff180fd71d5bf5cbab79d4f
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In some cases we have the qpair already when calling
this function. So pass the qpair to avoid having
to get it from the request. This shows about a 3%
performance improvement for high IOPs single core
tests.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I22fcca560492f4e7cf5ffedd252e41a027d0dd79
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/455286
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Currently the nvme driver will always log any
request completed with error status. Some
applications may not want this behavior. So provide
an option to disable it at the controller level.
When this option is enabled, any failed requests
from queues associated with that controller
(including the admin queue) will not log the
failed request.
Of course the application will still receive
the failed status code and can decide to do its
own logging there.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia093fcd23cf321a820fd53183ee7e2dac4f9d378
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/454081
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will (finally) enable resets for fabrics
controllers.
Move some of the work previously done in enable_admin_queue
up to this new disconnect/connect logic.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6239f0c0f36192db921d33f2322b1874b9382a01
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453939
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will be used on the adminq, and set while the
qpair is connecting. It allows the qpair_process_completions
routine to know that it should still try to process completions,
even if the controller is resetting.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I377b9c934295eb5f45f03efd90c2a268defb4bd4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453938
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
For fabrics controllers, the fabrics cmds are what gets
the controller out of reset.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6804874e867466669a55dff11a0a865add8bbc99
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453937
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We cannot complete error reqs from spdk_nvme_ctrlr_reset -
this could result in completions on threads not expected
by the user for I/O queues.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2e266a2618f1791ef1a1b713d1940357f23f7bff
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453932
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We are going to use it earlier in this file in an
upcoming patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie388ca76370e53465edb73a99d191492580603c9
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453930
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This requires moving the function, but since it's so
small and the change is trivial, move and plumb it in
the same patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I69cf020736676d80c6426491865d2eb063e923df
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453739
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The RDMA transport was the only one implementing this
function, and it only does a connect - not a disconnect
followed by a connect.
A later patch will add a matching disconnect function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ib68eb0ff2f8e59f437d6d8831bb37dfddf83e9a4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453929
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Next patch will use this function earlier in the
file, so move the function now rather than in the
later patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I50de44f69d0aedffddd251d00491912fd4a0f503
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453780
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I12b4081d3cf57bda8b01911c25a9c13102a1115d
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453741
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Also fix call to this function that was treating the
print_on_error parameter as if it was dnr.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9f048e8873ae0fcf07c9c6d11329a3fb21d92bda
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453740
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This function returns a pointer to the PCIe I/O registers for a controller
or NULL if unsupported for this transport.
Used for PCIe only, other transports return NULL.
Use with caution.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: I849f9de9ad259a65b1eef9c1237345eb7195b9bf
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452927
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
These were accidentally removed in a previous
patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Idab274427c064ff8aff1cdca2dd80d7d24e8cce4
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453747
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This transport function is a complete nop now, so
remove it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5cc6ac75795a3cf5311f24e2ac293fb53d4b9f8c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453487
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This will allow us to move more of the reset-related
functionality to the common layer, as part of enabling
resets for fabrics controllers.
The transport qpair_enable and qpair_fail functions
acted similarly - so those are both removed now and
replaced with this new qpair_abort_reqs function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9486630ad5b807239b0b5bcde50e8cfd313695d3
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Upcoming patches will move the actual is_enabled
logic to the common layer as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9fd4d8712280295f57134ad66f8ccbfe9736d30a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453484
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
The nvme_qpair_disable functions will be going away in
an upcoming patch, so move this one bit of functionality
into a helper function in advance.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61c2de535c2230b988d56dea13b00f39cb59dcfa
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453483
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
We submit AERs to all controllers - both pcie and
fabrics. But currently we only manually abort the
aers when disabling the qpair for pcie. Make this
common instead by creating a new transport function
for aborting aers.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1e926b61b8035488cdc6e8cb4336b373732f985e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453482
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This allows us to reconnect the qpair in the future,
avoiding reallocating memory every time.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0b86d89d8ebee27125b6081fd3845718e1118d5a
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453481
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This better explains what the function is doing,
and makes the name more general so we can use it
for the adminq as well.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6b55761cb141a9a79cdef876be47995d8813b312
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453480
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This moves us towards not freeing and reallocating
this memory if and when we reconnect the qpair.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic20d3c221442f6206d161760a8bfa7f9b8989d4c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453479
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This will simplify some upcoming changes to reconnect
a qpair. In these cases we only need to re-register
the memory - we shouldn't have to allocate it again.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id8adff313f191fbf11d7502127a2b961f2ca2f6e
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/453478
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
In order to truly support multi-sgl inline requests in the RDMA
transport, we would need to increase the size of the
spdk_nvme_rdma_req object dramatically. This is because we would need
enough ibv_sge objects in it to support up to the maximum number of SGEs
supported by the target (for SPDK that is up to 16). Instead of doing
that or creating a new pool of shared ibv_sge objects to support that
case, just send split multi-sgl requests through the regular sgl path.
Change-Id: I78313bd88f3ed1cea3b772d9476a00087f49a4dd
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/452266
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Send the given NVM I/O command, I/O buffers, lists and all to
the NVMe controller.
This is a low level interface for submitting I/O commands directly.
This can only be used on PCIe controllers and qpairs.
This function allows a caller to submit an I/O request that is
COMPLETELY pre-defined, right down to the "physical" memory buffers.
It is intended for testing hardware, specifying exact buffer location,
alignment, and offset. It also allows for specific choice of PRP
and SGLs.
The driver sets the CID. EVERYTHING else is assumed set by the caller.
Needless to say, this is potentially extremely dangerous for both the host
(accidental/malicionus storage usage/corruption), and the device.
Thus its intent is for very specific hardware testing and environment
reproduction.
Signed-off-by: James Bergsten <jamesx.bergsten@intel.com>
Change-Id: I595fe02fe0dfa9c3ceba1ac116b6900357b02d2c
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451994
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reset the device to its factory defaults.
Change-Id: I43f7dc8fb7bd5226283a4762beac0e2cf016f698
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445253
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Also make some modification for invoking process in
nvme_manage tool.
Change-Id: Ib54db43d7336d3e839e7d9317c292b9a57b38f80
Signed-off-by: Chunyang Hui <chunyang.hui@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/445059
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
When a Namespace was removed all the field will be zeroed, which
may lead to being divied by zero error when IO is running, especially
with perf tool. The perf tool doesn't add hogplug support, so
we add the additional check here to avoid such issue.
Fix issues #728 and #629.
Change-Id: I0e387c8c1bd4f3d40130377e2e0f5143f43be6a3
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451762
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
logical_block_size and geometry_logical_block_size are uint32_t,
so correct conversion for endianness is used now.
Change-Id: Iaa5ff576da8bc4ca65fa21f28eb3afd30507b00a
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/451867
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
The mode of dmb oshld can guarantees cpu sequential execution,
which has less impact on performance.
Change-Id: If30b6a682a2216eecd1da039267ed4f5471afc38
Signed-off-by: h00448672 <heyang18@huawei.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/446827
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The upper levels of the stack allow for this, so we should follow that
pattern so I/O don't break here.
Change-Id: Ia862f14975a551b0675bafd7709fb7897d0d567e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450685
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The while loop in this function was structured such that if the final
child request did not contain a full number of SGE elements, it would be
truncated. We need to not only check whether we have a full number of
SGEs, but also if the current child has consumed the end of the parent
request.
Change-Id: I7df6c224e9ab66033c92d2cf1af10452f5cdfd9b
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450684
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is an attempt to fix device hotremove with VFIO.
A soft device hotremove request through sysfs [1] would
currently just block until the SPDK process manually
releases that device - e.g. upon an RPC request.
VFIO won't get unbound from the device untill userspace
releases all its resources. VFIO can signal a pending
hotremove request by kicking any file descriptor provided
by the userspace - and DPDK does provide such descriptor -
but SPDK does not listen on it.
DPDK does offer handy API to listen and in this patch
we make use of it inside our env/pci layer. Within
a DPDK callback we set an internal per-device hotremove
flag, which upper-layer SPDK drivers can poll with a new
env API - spdk_pci_device_is_removed().
The VFIO hotremove event will be sent to primary
processes only, so that's where we listen.
We make use of this new API in the NVMe hotplug poller,
which will process it just like any other supported
hotremove event.
Fixes#595Fixes#690
[1] # echo 1 > /sys/bus/pci/devices/<bdf>/remove
Change-Id: I03d88271c2089c740e232056d9340e5a640d442c
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/448927
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This avoids a data dependent load to find which
callback to call in the completion path.
Change-Id: Ifa20790a7af3332a74bc45037e589668744af797
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/450558
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
