The net library isn't needed - everything these RPCs
do can be done externally to the SPDK application.
This library will be removed in the 21.07 release.
As part of the deprecation, mark the net RPCs as
private. This will prevent an upcoming patch from
complaining that these RPCs are not documented.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I61118820fd29e410dca763595c3d9fd01a57373d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/7592
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
To allow SO_MINOR updates on LTS for the whole year it is supported,
the major version for all components needs to be increased.
This is to prevent scenario where two versions exists with matching
versions, but conflicting ABI.
Ex. Next SPDK release adds an API call increasing the minor version,
then LTS needs just a subset of those additions.
Increasing major so version after LTS, allows the quarterly releases
to update versions as needed. Yet allowing LTS to increase minor
version separately.
Disabled test for increasing SO version without ABI change, as
that is goal of this patch. This check shall be removed with SPDK 21.04
release.
This patch:
- increases SO_VER by 1 for all components
- resets SO_MINOR to 0 for all components
- removes suppressions for ABI tests
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I44d01154430a074103bd21c7084f44932e81fe72
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6167
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
There are many duplicated codes about sending response for writing bool result.
That we need a function to do this.
Then we can reduce many codes.
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Change-Id: Ic439111b1e9ca1013f8c657ab925f0c27a7be699
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/5033
Community-CI: Broadcom CI
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There is nothing left here, so remove it.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib947d42bc577dbebb4650b1be885e05a80f8f8cf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4541
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI
This patch removes the string from register component.
Removed are all instances in libs or hardcoded in apps.
Starting with this patch literal passed to register,
serves as name for the flag.
All instances of SPDK_LOG_* were replaced with just *
in lowercase.
No actual name change for flags occur in this patch.
Affected are SPDK_LOG_REGISTER_COMPONENT() and
SPDK_*LOG() macros.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I002b232fde57ecf9c6777726b181fc0341f1bb17
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/4495
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Mellanox Build Bot
Reviewed-by: Anil Veerabhadrappa <anil.veerabhadrappa@broadcom.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Community-CI: Broadcom CI
remove only the spdk_ prefix from static functions in
the above libraries.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I59ce032c3312fa73f30c133fd62e603c1eee2859
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2365
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Also, while we are here, consolidate setting SO_SUFFIX to one spot.
Previously, it was possible for a library to slip through
without an SO version.
Signed-off-by: Seth Howell <seth.howell@intel.com>
Change-Id: I4db5fa5839502d266c6259892e5719b05134518c
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/2361
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This will allow us to keep track of compatibility issues on a
per-library basis.
Change-Id: Ib0c796adb1efe1570212a503ed660bef6f142b6e
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/1067
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
To properly return the error case when adding an existing
IP or delete a not existed IP. Proper test case is also
updated.
This is also to fix below issue:
https://github.com/spdk/spdk/issues/992
Change-Id: Ia4d3af8cc86d9bdb66b18a165510cd08f9bfa555
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/476543
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
SPDK_ERRLOG lists the function name, so remove old references that
assume it doesn't and reprint the function name.
Change-Id: I69da6ca0a25bf0eda07d8dad52bcfadf964ac715
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/469487
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
As spdk_jsonrpc_begin_result() is not allowed to return NULL we can
remove these checks. We didn't have any tests cases that goes this path
anyway.
Change-Id: I0894e76c0162591e550e70b172566b9060a6dd5f
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/c/spdk/spdk/+/459199
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This separates the network interface management code (interface.c and
net_rpc.c) from the socket abstraction layer, which allows users that
only want the socket abstraction to avoid pulling in the JSON RPC
libraries.
Change-Id: I9b00285a70bac0c74c73353cfa900d4f3b2e465f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416475
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add state_mask to each RPC method and state to RPC server, respectively.
State mask of RPC method is set at registration. State of RPC server
is changed according to the state of the SPDK.
When any RPC method is recieved, if the bit of the RPC server is on in
the state mask of the RPC method, it is allowed. Otherwise, it is
rejected.
When any RPC is rejected by state_mask control, the new error code
is returned to describe the error clearly.
Change-Id: I84e52b8725a286e9329d61c56f498aa2c8664ec1
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/407397
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
This patch integrates VPP userspace TCP/IP stack,
as optional network framework to be used in SPDK.
Support is done via VPP Communications Library.
Change-Id: I4c2945c76878dbf24ff2f8612e0a21615f7d87e6
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/389566
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Its possible for a net_framework to have initialization and finish
functions. This patch adds mechanism to register spdk_net_framework
and executes appropriate functions during subsystem start/finish.
Change-Id: I06d9cb6e98f843794296b833caa3c79735f06f12
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403703
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Id370631770cb2e090c3efbe95cd86db4f6168c5e
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403702
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This enables more clear division of spdk_sock_* functions
and spdk_posix_* ones.
Change-Id: I329eaf99de9390c8473b57427966dfe6af777abb
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403700
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
A net implementation should be allowed to not create a socket group.
It would basically mean that it is not participating in polling at all.
This came up during VPP integration. To enable using both types of sockets,
all types are polled within socket group. There is possibility of VPP
not being initalized at all (VPP process not running or failing connecting).
This would result in hard requirement of VPP always running when its
support is compiled into SPDK. Handling NULL here allows VPP to opt-out of
this polling.
Change-Id: Id3489eaba858ee64e8e8a924a6836720e84d9ad0
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/403699
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Automatically detect more whitespace errors.
All existing cases are fixed; only whitespace change (verify with
diff -w) except for one comment style fixup in include/spdk/nvme.h.
Change-Id: If750e54b9c8e3421ea6feda5f20184a31431631e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/402360
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Alters internal spdk_process_new_interface_msg() function
such that it returns a failure instead of exit()'ing.
Change-Id: I31c5dd9db43449f81dbb0f581258476a58aa8000
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/402165
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This allows listening on the same port on IPv4 and IPv6 simultaneously;
otherwise, the second listen call would fail with an "address in use"
error.
Change-Id: I75010a2d1ec6559653e0bda40517dc13d8f5b9a5
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/401718
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Supporting sock_groups with multiple spdk_net_impls
is a bit tricky. We cannot just allocate space off
the end of spdk_sock_group for the implementation-specific
details - we need separate allocations for each
spdk_net_impl so that one spdk_sock_group can handle
spdk_socks from multiple spdk_net_impls.
Unit tests will come in upcoming patch.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1570862a044192d30a79224f6029bf3d8157ce80
Reviewed-on: https://review.gerrithub.io/400528
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The list of net impls doesn't need to be visible outside of sock.c.
Change-Id: I8def009acb82e5cd6f1e13e797079c1a94e3c7da
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/400864
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_sock_group_impl represents the implementation of
a sock group for a given spdk_net_impl (posix, vpp, etc.)
This extra abstraction is required for enabling
spdk_sock_groups with sockets associated with different
spdk_net_impls.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I7a380cc62c59bdac98996faf0387550c234165a0
Reviewed-on: https://review.gerrithub.io/400527
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Also convert the primary spdk_sock/spdk_sock_group
routines to use the spdk_net_impl abstraction
instead of calling the posix routines directly.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I6ae8f4aae619f326f28c40f28a387ada1b263e27
Reviewed-on: https://review.gerrithub.io/400335
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is the framework for providing multiple implementations
of TCP sockets in a single application. This patch just
adds the framework - upcoming patches will convert the
existing POSIX implementation to use this framework.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I07951e71f344dfe7689c818a13d7e7113c826643
Reviewed-on: https://review.gerrithub.io/400334
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This moves the POSIX specific pieces (namely the
file descriptor) out of the common sock/sock_group
structures and into posix-specific structures.
Note that the first member of these new structures
is the respective base structure - which allows for
simple casting between the generic and implementation-
specific structure types.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ie80800e66b792627fc9dc056cbdd1fd8991f0b22
Reviewed-on: https://review.gerrithub.io/400333
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Have the main spdk_sock_group_poll_count routine
just pass an array of sock pointers to the posix
implementation function. Then the posix implementation
can just fill out which spdk_socks have data and let
the caller do the callback routines.
This moves a fair bit of code from the posix implementation
to the common code, which will simplify the upcoming
VPP implementation.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I547821ce9875777448f433cae59e316a45c259f6
Reviewed-on: https://review.gerrithub.io/400332
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Parts of the close code (for both sock and sock_group)
is generic and will apply to every net implementation
(POSIX, VPP, etc.) - so move that generic code now.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I50b5b272b6af219a516c18c41eee5a2e00bf034d
Reviewed-on: https://review.gerrithub.io/400330
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This is a step towards abstracting the posix implementations
of these functions behind an upcoming net_implementation
abstraction. This will allow for use of multiple TCP
stacks in parallel.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I1ed7d8ae3f1a585ac7a503335c958ebb68fd057c
Reviewed-on: https://review.gerrithub.io/400329
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In early days of SPDK, there was an experimental userspace
TCP stack called libuns. The SPDK iSCSI target supported
using either the default POSIX/kernel TCP stack or this
libuns TCP stack.
libuns is no longer in use, but work has started on
supporting the FD.io VPP TCP userspace stack. Abstractions
are being put in place to allow *both* the POSIX and VPP
stacks simultaneously.
So remove the concept of a "default" net_framework that is
defined with weak symbols that can be overridden by another
object file. While here, also remove the "clear_socket_association"
concept which was specific to libuns.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I8a0385ca5ae113e34a637f835d8d69f8d510433e
Reviewed-on: https://review.gerrithub.io/400328
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
For now, this provides common abstraction for Linux epoll
and FreeBSD kqueue. It also provides the basis for future
changes where alternate userspace TCP stacks have their own
mechanism for polling a group of descriptors.
While here, remove old epoll/kqueue code in iscsi/conn.c that
was commented out when the iSCSI idle connection code was
recently removed - we now have a real implementation of it
in sock.c so the original code is no longer needed as a
reference.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I664ae32a5ff4d37711b7f534149eb0eb35942335
Reviewed-on: https://review.gerrithub.io/398969
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
This provides an abstraction layer around TCP
sockets. Previously we just used fd integers, but
we don't want to be tied to integers for alternative
userspace TCP stacks.
Future patches will do more work to enable multiple
implementations of this abstraction. For now, just
get the abstraction in place for POSIX sockets and
make all of the iSCSI changes associated with it.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I9a825e9e02eb6927c8702d205665c626f57b3771
Reviewed-on: https://review.gerrithub.io/398861
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
No functional change - this just reduces an upcoming
patch that will make further changes to this function.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic186f315b09ebadfba6120a70fac03ebb9beaffb
Reviewed-on: https://review.gerrithub.io/398856
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
The socket-related code was already broken out into
lib/net/sock.c, so break out the header portions
from include/spdk/net.h into its own sock.h.
This prepares for some upcoming changes in how
TCP sockets are abstracted, to enable alternative
userspace TCP stack implementations to be used with
SPDK.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I40b162e72ea80c235b49f10b17c2085fcfb385d4
Reviewed-on: https://review.gerrithub.io/398851
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Some upcoming changes will effectively render this moot
anyways by adding an epoll/kqueue descriptor to poll
on in all cases (not just connections that have been
idle for 5ms).
The epoll/kqueue code was just ifdef'd out instead
of removed - some of this code will be useful
and reusable with minimal changes in the upcoming
patches.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I0c354390537e6369cb3c32e78a59c300dec6d098
Reviewed-on: https://review.gerrithub.io/395553
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
This patch remove need for additional buffer when translating error code
to string.
Change-Id: Iaa60088b5c450581d3cdddbb425119b17d55a44b
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/386114
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Require braces around all conditional statements, e.g.:
if (cond)
statement();
becomes:
if (cond) {
statement();
}
This is the style used through most of the SPDK code, but several
exceptions crept in over time. Add the astyle option to make sure we
are consistent.
Change-Id: I5a71980147fe8dfb471ff42e8bc06db2124a1a7f
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/390914
Reviewed-by: <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
