Change-Id: I9c01bfc05417f07b9265692a02b6aaba37c507f2
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-on: https://review.gerrithub.io/431529
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Iddf357ad9a2a5d078591312ee545264d5775756b
Reviewed-on: https://review.gerrithub.io/429974
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
`remove_virtio_bdev` RPC can be used instead. It deletes
both Virtio Block and SCSI devices.
Change-Id: I3504f8d27eb13bb7522c05041c21042153a4fa18
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The 4 different RPC commands to create Virtio bdevs
have been unified to a single, yet another RPC command
in hopes the previous ones will be eventually removed.
That happened in 18.07 and now in order to remove the
old ones we mark them deprecated.
The unified RPC command was introduced in 18.07 and
has already replaced the old, separate RPCs in our
test scripts some time ago.
This patch also removes the old RPCs from doc/bdev.md
and while here, rephrases the Virtio section a bit to
make it more readable after some alphabetization
changes from the past.
jsonrpc.md already described the old RPCs as about to
be deprecated, so there are no changes required in
there.
Change-Id: I77ebf2dde56b1f4a6e4090ed76de16a97310c1c5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Most to-do items in lib/bdev/iscsi/README have been
done a long time ago, leaving this file greatly outdated.
It is removed now and the iSCSI bdev description is
added to doc/bdev.md.
Since most of the to-do items have been done, this
patch also adds a CHANGELOG entry announcing that
iSCSI bdev is no longer in experimental state.
Change-Id: I186c9e1489547152655e1e036b27ab6bc17fcf11
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Purpose: We need to get the port info in other applications
(e.g., NVMe-oF TCP/IP transport)
Change-Id: I3a4636e764e44425436bb064cb0062c6f3e44035
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/428313
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Kulasek <tomaszx.kulasek@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
This patch added the support of RPC method to enable,
adjust, disable the bandwidth rate limit on the bdev.
And it can work together with the existing IOPS rate limit.
The RPC method has been consolidated to support both IOPS
and bandwidth rate limits as below:
usage:
rpc.py set_bdev_qos_limit [-h]
[--rw_ios_per_sec RW_IOS_PER_SEC]
[--rw_mbytes_per_sec RW_MBYTES_PER_SEC]
name
positional arguments:
name Blockdev name to set QoS. Example: Malloc0
optional arguments:
-h, --help show this help message and exit
--rw_ios_per_sec RW_IOS_PER_SEC
R/W IOs per second limit (>=10000, example: 20000).
0 means unlimited.
--rw_mbytes_per_sec RW_MBYTES_PER_SEC
R/W megabytes per second limit (>=10, example: 100).
0 means unlimited.
Change-Id: I9c03cd635280add01801a81c6a6c02f0cf85bee1
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/416511
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This series of changes is aimed at enabling spdk_mem_map_translate to
report back to the user the length of the valid mem_map up to the
function that requested the translation.
This will be useful when retrieving memory regions associated with I/O
buffers in NVMe-oF. For large I/O it will be possible that the buffer is
split over multiple MRs and the I/O will have to be split into multiple
SGLs.
Change-Id: I90da6d4d31c669a3bf046f7721923dd743c5ef21
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/425328
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
We kept this disabled by default originally because it lacked
multiple iov support needed for vhost and nvmf in-capsule data.
Now that support has been added, there is no reason to not
enable it automatically - it has no extra package dependencies,
so requiring users to specify --with-raid to configure is just
an extra unneeded step.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia9796370e12a6f93993e70083de36114a37851bd
Reviewed-on: https://review.gerrithub.io/426003
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Add a new script to enable converting
old INI config files to the new JSON-RPC
config file format.
This prepares for deprecating the INI
config file file format in the future.
Change-Id: I0f2bfa9a585ce3537772b662d8e4028ab08a554d
Signed-off-by: Pawel Kaminski <pawelx.kaminski@intel.com>
Reviewed-on: https://review.gerrithub.io/420457
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Initial support for softare AESNI_MB DPDK driver only.
Have tested (both aesni and QAT seprately and concurrrently) on underlying NVMe devices
with bdevio and a bdevperf script that runs IOs from 512B to 128K each with Q depths from
1 to 512 in powers of 2 for 30 seconds each run.
QAT can be included in the code (but not makefile) and marked as experimental
until we are ready to test in CI. It works well on 2 systems but is a big PITA to get
the hardware setup and configured for use with DPDK (IMHO).
Change-Id: If518c3df8e74e00efa18afdf194824c5e69778fc
Signed-off-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/403107
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
The function now takes a pointer as it's last argument, and copies the
size of the memory region for which the translation is validinto that
pointer.
For now, that will always be 2MB. However that behavior can change in
the future.
This series of changes is aimed at enabling spdk_mem_map_translate to
report back to the user the length of the valid mem_map up to the
function that requested the translation.
This will be useful when retrieving memory regions associated with I/O
buffers in NVMe-oF. For large I/O it will be possible that the buffer is
split over multiple MRs and the I/O will have to be split into multiple
SGLs.
Change-Id: I8686c166ec956507f5ae55cf602341281482cb89
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/424888
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This it to prepare for RPM package. Also lower number of dependencies
needed by SPDK tools.
Update changelog to deprecate Python 2 and explicit interpeter invoking
in scripts.
Change-Id: I2497cca721cbcbadc1c99c675f8b8b7f682d5efa
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/425233
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This is an artifact from before SPDK had a configure
script or a DPDK submodule. Make configure the
only supported way for specifying the location of the
DPDK installation to use with SPDK.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I5c197c46220928bb18b97c8807755967d76ea42c
Reviewed-on: https://review.gerrithub.io/424893
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Config file pathnames have been possible on the command line
for a very long time, and all of the SPDK testing infrastructure
uses it. The default pathnames were added a very long time ago,
and now can cause weird issues like conflicting with --wait-for-rpc
when an INI config file is not passed on the command line but is
pulled in by the default pathname instead.
So remove the default pathnames.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia914ff1c9321235f79f8cc9a054ed7f099340151
Reviewed-on: https://review.gerrithub.io/424606
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This is not used anywhere, and is not something we can
set over RPC. So make this a command-line only option
(as it should be).
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I2df862cdce2f17992d2324312d5c0e98b38a8acd
Reviewed-on: https://review.gerrithub.io/423930
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Previous patches enabled users to configure CHAP secrets dynamically
by RPCs. Subsequent patches will enable users to load CHAP secrets
from JSON config file.
Loading CHAP secret file is done by default and this will conflict to
JSON config file.
Hence the path to CHAP secret file is required to specify in the config
file or JSON RPC set_iscsi_options explicitly after this patch.
Users who have used CHAP secret file are expected to specify it explicitly
and this will be no harm for them.
Besides, CHAP secret file is not oly for discovery sessions but also for
login to iSCSI targets. However there were wrong description to make user
misunderstand. Hence remove these wrong description in this patch too.
Change-Id: Ic4093cabc0c14b87e26baef4bba6b0d292e40c06
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/421467
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This feature change is done by a few patches and it is difficult
to do CHANGELOG in a patch of them. Hence use this dedicated patch.
Change-Id: I4b3957640828f8c4652a2cc0db84c37fc2a04063
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423051
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ifff553ed70ce5aa8e7bdf6d8a8e9e9afb73e8a64
Signed-off-by: Chen Wang <chenx.wang@intel.com>
Reviewed-on: https://review.gerrithub.io/423497
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
An new RPC set_iscsi_target_node_auth enables users to configure CHAP
authentication for the target node dynamically.
New setting is used for new iSCSI sessions. For existing iSCSI sessions,
new setting is not used until user logout and login again.
Try to use descriptive message in the RPC when error occurs.
Change-Id: I0bd40d92262d708c1f7de0effb208078bdf8cc41
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420974
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
An new RPC set_iscsi_discovery_auth enables users to configure
CHAP authentication for discovery sessions dynamically.
Try to use descriptive message in the RPC when error occurs.
Change-Id: I8883d5e054539cf6db091a5b79d0479e62119811
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/420976
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Current parameter names of `set_iscsi_options` and `get_iscsi_global_params`
RPC method for CHAP in discovery session may not be clear and long
compared with CHAP in login to target nodes.
This patch changes parameter names of `set_iscsi_options` and
`get_iscsi_global_params` RPC method for CHAP in discovery session
from no_discovery_auth, req_discovery_auth, req_discovery_auth_mutual,
and discovery_auth_group to disable_chap, require_chap, mutual_chap,
and chap_group, respectively.
Old parameters are still usable because decoder of them are not removed.
Change-Id: If3102f1233d57ee3cadfb733a6fc1fca14a0e972
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/423050
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
So we don't need to allocate memory (maybe failed) just for free other
memory.
Change-Id: I2c83f6acc2aa6ed79455bff90f952a2e70b44d59
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/422203
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Adds option to configure script (default is disabled)
to build SPDK shared libraries, and enhances build
correspondingly to do so. This includes the single, combined
shared library encompassing all of the SPDK static libs,
as well as production of individual SPDK shared libraries
corresponding to each of the static ones. Although the
SPDK shared libs conform with shared lib naming conventions
complete with version numbering suffixes, this does not
confer any ABI compatibility claims whatsoever at this time.
It's merely conformance with the naming conventions.
Finally, there are no built-in dependencies between SPDK
shared libs, thus requiring one to specify all needed SPDK
shared libs to resolve all symbols in the final link of an
executable wishing to use said SPDK shared libs.
Change-Id: Ia375c0e3fb6d150d45a39e84e3b226fbaea48545
Signed-off-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-on: https://review.gerrithub.io/422307
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
spdk_nvme_ns_get_sector_size returns the sector
size of the data only. This new function adds
in the metadata size, if any.
While here, modify the bdev/nvme driver to use this
function - this is needed for ongoing extended sector
size work through the bdev layer.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ic8070a7f8d29b0b2ac2a2d65e0df5f4736488351
Reviewed-on: https://review.gerrithub.io/422445
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I9b9c8f0c213dcdd4d233171daf41e96033324af6
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/421164
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Fill in some missing things based on the diff
Change-Id: I5dadd6ac31dac7e9cf483c514080f88b1429a405
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/420922
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Change the type of nvme_timeout parameter in
spdk_nvme_ctrlr_register_timeout_callback from uin32_t to uint64_t.
Reason: This will make the timeout trigger test more flexible and
will not affect the original meanings.
Also for the configuration file, still maintain the compatability
support
Change-Id: I94c90f67b2e9c57220ab82ecea11a1590d62aed4
Signed-off-by: Ziye Yang <optimistyzy@gmail.com>
Reviewed-on: https://review.gerrithub.io/419326
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This is a dependency of the DPDK crypto framework.
The submodule is currently set to our SPDK fork of the ipsec library
which is based off of the library v0.48 tag, as required by DPDK plus
one minor Makefile change on the 'spdk' branch of the fork.
Also added is a configure option '--with-crypto' and the associated
conditionals for building DPDK with or without the library dependency.
The crypto vbdev patch will use this same configure option to determine
DPDK opts as well as whether the crypto vbdev should be built or not.
Change-Id: Ib1cfd15b63b29acf3c2f7345d0d7edfd94716620
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/404983
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Raid module:
============
- SPDK raid bdev module is a new bdev module which is
responsible for striping various NVMe devices and expose the raid bdev
to bdev layer which would enhance the performance and capacity.
- It can support theoretically 256 base devices (currently it is being
tested max upto 8 base devices)
- Multiple strip sizes like 32KB, 64KB, 128KB, 256KB, 512KB etc is
supported. Most of the current testing is focused on 64KB strip size.
- New RPC commands like "create raid bdev", "destroy raid bdev" and "get raid bdevs"
are introduced to configure raid bdev dynamically in a running
SPDK system.
- Currently raid bdev configuration parameters are persisted in the
current SPDK configuration file for across reboot support. DDF will be
introduced later.
High level testing done:
=======================
- Raid bdev is created with 8 base NVMe devices via configuration
file and is exposed to initiator via existing methods. Initiator is
able to see a single NVMe namespace with capacity equal to sum of the
minimum capacities of 8 devices. Initiator was able to run raw
read/write workload, file system workload etc (tested with XFS file
system workload).
- Multiple raid bdevs are also created and exposed to initiator and
tested with file system and other workloads for read/write IO.
- LVS / LVOL are created over raid bdev and exposed to initiator.
Testing was done for raw read/write workloads and XFS file system
workloads.
- RPC testing is done where on the running SPDK system raid bdevs
are created out of NVMe base devices. These raid bdevs (and LVOLs
over raid bdevs) are then exposed to initiator and IO workload was
tested for raw read/write and XFS file system workload.
- RPC testing is done for delete raid bdevs where all raid bdevs
are deleted in running SPDK system.
- RPC testing is done for get raid bdevs where existing list of
raid bdev names is printed (it can be all raid bdevs or only
online or only configuring or only offline).
- RPC testing is done where raid bdevs and underlying NVMe devices
relationship was returned in JSON RPC commands
Change-Id: I10ae1266f8f2cca3c106e4df8c1c0993ddf435d8
Signed-off-by: Kunal Sablok <kunal.sablok@intel.com>
Reviewed-on: https://review.gerrithub.io/410484
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
This was changed in commit 8f26b74e020a ("examples: make debug flag
option consistent").
Change-Id: Id47eff11321063b684fdd4e9d2187e459065e98e
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-on: https://review.gerrithub.io/416890
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Users can set specified Admin commands or IO commands with
error status, when submitting new commands which are already
set with error status, the commands will return to the caller
with specified error code. So that users can emulate some error
status for their error condition code path.
Change-Id: I4b93c7e4f2b15a659da73b39e26bfa162eb5214e
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/410870
Tested-by: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
