The specification states that opcode is not valid when the status
is not success. Instead, keep track of the operation type ourselves.
Change-Id: I60af4b35e761c46f5f296a61cedfca198836197f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Co-authored-by: Evgeniy Kochetov <evgeniik@mellanox.com>
Reviewed-on: https://review.gerrithub.io/430865
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
After some lengthy discussions with the RDMA experts, the only
way forward on an RDMA qp error is to disconnect it. The initiator
can create a new qp if it wants to later on.
Remove all of the error recovery code and disconnect the qp
any time an error is encountered.
Change-Id: I11e1df5aaeb8592a47ca01529cfd6a069828bd7f
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430389
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Let's just make them consistent and all with a
bdev_* format.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ia3dec7f4be2ecc765b4aa095e6b675f13d326063
Reviewed-on: https://review.gerrithub.io/429289
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Ziye Yang <optimistyzy@gmail.com>
Currently only the iscsi => scsi dependency is defined to
demonstrate how the framework behaves.
Eventually, lib/Makefile will be populated with more lines
of the form:
DEPDIRS-iscsi : scsi log conf event
This line will ensure that the iscsi subdirectory is built
after the specified dependency directories.
Then the lib/iscsi/Makefile also defines:
DEP_LIBNAMES = scsi log conf event
This line adds dependencies from the iscsi.so to the specified
libraries.
Ideally we could avoid this duplication by passing the DEPDIRS
value to the lower level Makefile, but that breaks down when we
start considering event/subsystems/* libraries. So for now we'll
need to duplicate it. Incidentally, DPDK also duplicates the
dependency information like this.
While here, remove use of $(MAKESUBDIRFLAGS) in spdk.subdirs.mk -
it was no longer used anywhere in the tree.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: If63cbc10ffa18ac6361e4210bd6196ffe88bec43
Reviewed-on: https://review.gerrithub.io/429287
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Lance Hartmann <lance.hartmann@oracle.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Put the core operation into the loop without using the found flag.
Change-Id: I6509988f11a87e7a7f0ffbad46a090837ee9de20
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/430512
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The condition that both raid_bdev and raid_bdev->base_bdev_info[i].bdev
are not NULL is already verified by matching it with base_bdev.
This is a preparation to the further refactoring in the next patch.
Change-Id: I273a31c2ff2f79caf52b59938eee547129768abe
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/430511
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Remove the duplicated operation and reorder configure() to initialize
the raid_bdev and then the bdev.
Change-Id: Ic39da1936b0755e6acd1ae62bd55a241b77f7056
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/430400
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
While here, add error message if an invalid timeout action value is found.
Change-Id: I09acec39680a640ea9bc2d7a819e4b1887ed622d
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/429874
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The crypto drivers are now always initialized at
bdev module init, so any subsequent attempts to
init them would immediately return with rc = 0.
Besides, from the code perspective, this call does
not have the proper error handling. To clean up
all of this, we remove the call entirely.
Change-Id: I8e4f5a314b8c5e83a50c668d6c8953a95d6832cc
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/430678
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Code movement only. No other changes.
Change-Id: I04cf179ecd57154172a9369926cbeaaa37e11a52
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430505
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
This event only occurs when using shared receive queues, which
the target does not currently support.
Change-Id: If155843610cf0e961b9783d4afd64b969b4316f4
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/430388
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Sasha Kotchubievsky <sashakot@mellanox.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In early development of crypto we built the lirbary using
dpdkbuild/Makefile but later due to a DPDK change we needed
to move to a newer version of the ipsec library that is now
built and installed in pkgdep.sh btu we never removed it
from the makefile.
This patch removes the extra building of the ipsec module.
Change-Id: I367618440074d952ff13c6e2098fc3a572cc785e
Signed-off-by: paul luse <paul.e.luse@intel.com>
Reviewed-on: https://review.gerrithub.io/429519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
There is no guarantee that the first io_channel created for
a LUN will be the last one destroyed. So we need to attach
the poller to the LUN, not the io_channel.
While here, and related to this patch, remove the assert()
that the last channel destroyed must be on the LUN's
master thread. This assertion simply isn't true.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: I3e0dfddde2de70caec479bf1b6703f01c9d7b3a2
Reviewed-on: https://review.gerrithub.io/431375
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Liang Yan <liang.z.yan@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Previously there was no consideration for IO that were outstanding
to the crypto device when handling a reset. This patch makes sure
that those IO are completed with FAIL status prior to completing
the reset that we pass down the stack.
It does so by sending down the reset first and in the completion
using spdk_for_each_channel and the poller to quiesce each channel
allowing the crypto side to complete all IOs before we finally
complete the reset IO after the last channel is quiesced.
Resets are tracked on a per bdev basis.
Addresses github issue #449.
Change-Id: Iadb07bada1fcaad33d9f224a60d983a7eb835236
Signed-off-by: paul luse <paul.e.luse@intel.com>
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.gerrithub.io/428552
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Seth Howell <seth.howell5141@gmail.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Small language fix. But more importantly, the missing return caused
crashes because the released handle was used for the following
rados_ioctx_create.
Change-Id: Ica5efc157b89fe957a55bdee476ee70e6ccc2568
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Reviewed-on: https://review.gerrithub.io/430547
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
"get_nvme_controllers" can be used to list NVMe controllers.
Names and transport IDs of the NVMe controllers will be
reported by this method.
Change-Id: Ie59b567afc09e70475f97939e86a872af39c5d8a
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/419094
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The error message says "Failed to create rados context for
rbd_pool=..." but then included the image name.
Change-Id: Iab78df6f67753705ac422dd63b414a5ba24727b7
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Reviewed-on: https://review.gerrithub.io/430458
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With all SPDK patches in place, we can now enable dynamic
memory management for all DPDK versions >= 18.05.1
Hugepages can be still reserved with [-s|--mem-size <size>]
option at application startup, but once we use them all up,
instead of failing user allocations with -ENOMEM, we'll try
to dynamically reserve even more. This allows starting DPDK
with `--mem-size 0` and using only as many hugepages as it
was actually necessary.
Change-Id: I9e6f58ea50af2234f96a53e7a32d9e14d2df65ff
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/426828
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This helps us avoid situations where other bdev modules will break the
rte_pci_bus mappings for qat devices before we have an opportunity to
initialize the qat pmd.
Also, update the blobstore match file to handle the possibility of using
a crypto driver and improve the json_config and spdkcli scripts to
handle allocating qat_crypto drivers.
Change-Id: I7359c67d1992df1d5bb85585eca6d5c342787649
Signed-off-by: Seth Howell <seth.howell@intel.com>
Reviewed-on: https://review.gerrithub.io/430393
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
We need to resend SET_MEM_TABLE whenever memory
is hotplugged or hotremoved.
Change-Id: I9bdc975f11b07866122bc49b9cf372071c5370f2
Signed-off-by: Dariusz Stojaczyk <dariuszx.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/422582
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
By running random, 64KB, 70% write, and 30% read workload and periodical
TCP disconnection from the initiator, segmentation fault have occurred.
By investigation, when the last write task completed and dequeued
the primary write task in spdk_iscsi_task_cpl(), the primary write task
was already dequeued in spdk_clear_all_transfer_task().
This patch dequeues all primary write tasks after all outstanding
tasks complete.
After starting to exit the connection, the connection will not receive
any command. Hence waiting for completion of all pending tasks first will
avoid double dequeue safely.
Change-Id: I8e2b6b756be3a6e096675acc81cdb93fb6a7e350
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/430397
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The next patch will change spdk_iscsi_conn_destruct() to fix the
Github issue #457. This patch is a preparation to that.
Change-Id: Iaf1c8a3fe8514d6bbd9f61f19f87b0bb2c27e76e
Signed-off-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-on: https://review.gerrithub.io/430402
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
We always need to ensure bvdev->bdev is not NULL before
accessing it. GET_CONFIG handler was standing out in this
matter, causing segfaults when connecting to a vhost block
device that went through a bdev hotremove.
If the bdev has been hotremoved we'll now report
blocksize == 0 and blockcount == 0. From what I checked,
QEMU will still expose a virtio-blk device to the VM, but
linux (because that's what I checked) won't create a block
device for it.
Note: The behavior above can be tricky to investigate as
neither QEMU nor VM doesn't log any messages about it.
We should eventually reject any new connections to a vhost-blk
socket with hotremoved bdev, but that's a task for later.
Fixes#460
Change-Id: I266257f4b35d07f35ba03adf46cb18425f3cf39a
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/417934
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Add debug log in set feature,
spdk_nvmf_ctrlr_set_features_volatile_write_cache
to indicate the volatile write cache is disabled or enabled
according to the conditon.
Change-Id: Idc0a7fb461e2bbf1371d4a3faf5d839c7370bb65
Signed-off-by: yidong0635 <dongx.yi@intel.com>
Reviewed-on: https://review.gerrithub.io/428953
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
An example to send nvme_cmd rpc request:
scripts/rpc.py send_nvme_cmd -n Nvme0 -t admin -r c2h \
-c <base64_urlsafe encoded cmdbuf> -D 4096
nvme-rpc will be processed internally by bdev_nvme.
Change-Id: I6e731b76be0f503d48154a8b34a1e81b4b454396
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/417962
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Change-Id: I7c08591ef7f92c076fde53bfd6467f8d5d2a2429
Signed-off-by: Liu Xiaodong <xiaodong.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/430382
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
The time required to wait increases with the amount of submitted
FLR resets. Now that DPDK takes less and less time to initialize,
this starts to become an issue. We can even see on our CI within
regular tests where a single application is start-stopped in
a short period of time. This is also a problem if a device is
detached via RPC and immediately attached afterwards.
The time required to wait seems to cap at 2 seconds, so instruct
our driver to wait exactly that.
Change-Id: I18b6fbdea9b0dca5d7e1756e9ead7d97119f2fa2
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429415
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is an NVMe-specific issue and I/OA or VirtIO devices don't
need it. Additionally, the delay is now asynchronous, meaning
that potentially multiple NVMe controllers can wait all at once.
The drawback of this change is that we're needlessly waiting
even when using uio_pci_generic. However, since the delay does
not block anymore, its impact is significantly minimized.
Change-Id: I5d16a7fd7cb66c785acb687f14690e95f6188b9e
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429414
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
`remove_virtio_bdev` RPC can be used instead. It deletes
both Virtio Block and SCSI devices.
Change-Id: I3504f8d27eb13bb7522c05041c21042153a4fa18
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429909
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
The 4 different RPC commands to create Virtio bdevs
have been unified to a single, yet another RPC command
in hopes the previous ones will be eventually removed.
That happened in 18.07 and now in order to remove the
old ones we mark them deprecated.
The unified RPC command was introduced in 18.07 and
has already replaced the old, separate RPCs in our
test scripts some time ago.
This patch also removes the old RPCs from doc/bdev.md
and while here, rephrases the Virtio section a bit to
make it more readable after some alphabetization
changes from the past.
jsonrpc.md already described the old RPCs as about to
be deprecated, so there are no changes required in
there.
Change-Id: I77ebf2dde56b1f4a6e4090ed76de16a97310c1c5
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429908
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Most to-do items in lib/bdev/iscsi/README have been
done a long time ago, leaving this file greatly outdated.
It is removed now and the iSCSI bdev description is
added to doc/bdev.md.
Since most of the to-do items have been done, this
patch also adds a CHANGELOG entry announcing that
iSCSI bdev is no longer in experimental state.
Change-Id: I186c9e1489547152655e1e036b27ab6bc17fcf11
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: Ie122f37ea93d431b5e35cf46e56f53aa6795ef2c
Signed-off-by: Liang Yan <liang.z.yan@intel.com>
Reviewed-on: https://review.gerrithub.io/429568
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Piotr Pelpliński <piotr.pelplinski@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Capture json version by reference so we don't need to call free() in
parse_single_response.
Change-Id: Ia97fa484ca9ff8692a15160878b625b57d7f4b9e
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/429261
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
In JSON RPC the ID is optional. Method is mandatory but user might want
to produce the name later or by using
spdk_json_write_named_string_fmt(). This patch also changes the argument
order.
Change-Id: Ifbd35b8c93e684d15731c4ba1d18bf68d1e8a068
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/429254
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If JSON structure is not known it is hard to use it with current API. To
address this gap lets add API that will give more flexibility the user.
This patch also adds proper unit tests.
Change-Id: I82eb8c8d4a562ee4c9eb5b72c69fe36004dc576e
Signed-off-by: Pawel Wodkowski <pawelx.wodkowski@intel.com>
Reviewed-on: https://review.gerrithub.io/424009
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
All PCI device management is done only by the primary process,
so there's no need to delay device initialization in secondary
processes. If device is being initialized in a secondary
process, then it must have been already initialized by the
primary.
Change-Id: I087da77f981018dabf3feed59c76b294a16ca88d
Signed-off-by: Darek Stojaczyk <dariusz.stojaczyk@intel.com>
Reviewed-on: https://review.gerrithub.io/429413
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
This indicates an out-of-spec device, so just print an error
message but don't bother retrying the AER.
While here, add status code type (sct) check for the other
status code check when an AER fails - it is not enough to
compare just the status code.
Signed-off-by: Jim Harris <james.r.harris@intel.com>
Change-Id: Ibd26549aa08d3eb4814c239b6b2c6fe95e069a54
Reviewed-on: https://review.gerrithub.io/429533
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
In the case that the subsystem in the related poll group has
NULL IO channel assigned due to some problem like out of resource,
for example, the NVMe SSD hardware itself has limited number
of IO qpairs. The subsystems in the particular poll group
could have zero valid channels. In this case, the creation of
assoicated poll group will fail and when adding the new qpair
to the specified poll group, needs to have a check and pick the
available poll group.
Change-Id: Iedee2a6375e48eb7bf899cfb0542c565c7ebd231
Signed-off-by: GangCao <gang.cao@intel.com>
Reviewed-on: https://review.gerrithub.io/423646
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
If raid bdev creation failed, the bdev still be configuring and not
register it. For those raid bdev, raid_bdev_remove_base_bdev() should
cleanup them as well.
Change-Id: If2eda8ec80e7fdeb5e551fafe57a43a27ae0f9e6
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/427331
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Previously, the difference between configuring and offline is
unclear, this patch just fixes it. The key difference should be
whether the raid bdev have ever registered. Offline is registered
before but unregistered now, and configuring has never registered.
According to the above, we should never set configuring raid bdev to
offline because it never got registered.
Change-Id: Id44ef6654e032993ffb8444e7e7ae3e43a9b0f16
Signed-off-by: wuzhouhui <wuzhouhui@kingsoft.com>
Reviewed-on: https://review.gerrithub.io/428321
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
With Identify Namespace Identification Descriptors can be
executed asynchronously, most of functions in the controller
initialization now can be executed asynchronously now, for
host with multiple controllers this can save some time during
initialization.
Change-Id: I70e3c6c2c691134d2ae4c5969288cced1538c6cc
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/428585
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Change-Id: I189ad8889c74937bf43bcf2c3029416ddb94976d
Signed-off-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-on: https://review.gerrithub.io/425705
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Chandler-Test-Pool: SPDK Automated Test System <sys_sgsw@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
