This assert is used to make sure that there is no
active batch (spdk_accel_batch) task is used.
If there are active batches found, it means that
we did not handle this case in a good manner.
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Change-Id: I7ea6247d2d5a40cf4f3f31cd8b1240fed4648d62
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8857
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Paul Luse <paul.e.luse@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
After compiling SPDK with `--enable-ubsan` option, ocf tests fail with the
following error:
src/ocf/mngt/ocf_mngt_common.c:170:2: runtime error: member access within
misaligned address 0x200003800188 for type 'struct ocf_cache', which requires
64 byte alignment
The mentioned line of code is `list_for_each_entry()` macro used for iterating
lists. Forcing `struct list` alignment removes the issue.
Signed-off-by: Michal Mielewczyk <michal.mielewczyk@intel.com>
Change-Id: I803dd962ff873679f42568e6f42fec7fed278f67
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8516
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Rafal Stefanowski <rafal.stefanowski@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
The assertion should verify that a clone has been found. Without the
dereference, it makes no sense, as that pointer is dereferenced earlier.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: I67fa17b33df6d507822a17ffc221a6d360985646
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8919
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Using `bs_allocate_and_copy_cluster()` instead of a zero-length write
makes it possible to inflate/decouple snapshots, as the writes would
fail with -EPERM, because the snapshots are marked as read-only.
Additionally, zero-length non-vector requests are now completed
immediately. It makes it consistent with the vector path (which already
does that) and allows us to use the zero-length reads as a context for
cluster copy.
Fixes#2028.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ib7fdee352972ecf808833aa179820d85cfab7eed
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8918
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
93c4adda4d did not take
DPDK 21.05 release into consideration.
Change-Id: I9cc6a0fb7cb600d6ad08fc9eca1cbcd5e3c25d14
Signed-off-by: Karol Latecki <karol.latecki@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8835
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Maciej Wawryk <maciejx.wawryk@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
36b5a69bb0 "trace: fix the snprintf warning issue"
2ac1521581 "test/compress: fix Wstringop-overflow warnings"
These patches are needed to make sure SPDK's refs can be compiled
under GCC 11 (e.g. fedora34).
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I7e3800351b02506c99ba8ac7f4d40312867e1ab9
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8790
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
The data buffer isn't available at the beginning.
Change-Id: Ieeb1a297ff52dfdc6cd999d04862a0cd96483650
Signed-off-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8932
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
There were a few references to "SPDK thread context", which are no longer
relevant in the current codebase. Additionally clean up another XXX to be
clearer as to the context, and fix two minor typos.
Signed-off-by: John Levon <john.levon@nutanix.com>
Change-Id: I2aeda8aaa0edc973fdb67feccc32d792c5f7292e
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8548
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Thanos Makatos <thanos.makatos@nutanix.com>
If the process doesn't terminate before we try to create a new iscsi
node, the socket might still be in use by that process causing the
`bind()` call to fail.
Fixes#2052.
Signed-off-by: Konrad Sztyber <konrad.sztyber@intel.com>
Change-Id: Ic6c32774b3c3d7008b1089f151fc933177f28aac
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8902
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Jim Harris <james.r.harris@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Split the NVMe controller reset into pre-init and reinit stages so
that the latter begins with a call to nvme_ctrlr_process_init(),
returning -EAGAIN if the controller is not yet ready so that a poller
can call it again later.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: Ia182b04e438241b139109be93f3ed858fac7f3d4
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8486
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Purpose: Only Open image on one spdk_thread
due to the limitation of librbd module in order to
eliminate the lock overhead among different
spdk_threads on operating on the same image.
Change-Id: I64c62e8ae1c3324b92cfd953b44ec08af6688530
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6812
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
BUG FIX: call nbd_bdev_hot_remove will stuck if
it is called when nbd has in-flight IOs.
nbd_bdev_hot_remove is asynchronous. It will
guarantee the stop of this nbd.
nbd hot remove test will be added later
Signed-off-by: MengjinWu <mengjin.wu@intel.com>
Change-Id: I0a0dfab31fafd3d61212ade53c74ad05dbbff268
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8039
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: GangCao <gang.cao@intel.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: <dongx.yi@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This is done since previous version is not compiling anymore under
latest fedora33.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: I8f65d5e47af81f01221eb8699c3323c3f8099f38
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8916
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Karol Latecki <karol.latecki@intel.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This is first commit that should go into latest SPDK
after the code freeze for SPDK 21.07.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: Ib8c7a0e9d8594271119e4c9d0340528003798a92
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8901
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
This parameter is still part of API spdk_sock_impl_opts
structure but it is not used. Keep it to support ABI
compatibility since it is located in the middle of the
structure and removing it may break socket opts initialization
or parsing.
Change-Id: Ib641ad7d965d68bc9ebb65dba531408d88cf6fa1
Signed-off-by: Alexey Marchuk <alexeymar@mellanox.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8914
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Implemented nvmf code to allow transports to use ZCOPY. Note ZCOPY
has to be enabled within the individual transport layer
Signed-off-by: matthewb <matthew.burbridge@hpe.com>
Change-Id: I273b3d4ab44d882c916ac39e821505e1f4211ded
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6817
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Xiaodong Liu <xiaodong.liu@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Revise the if case to avoid the assert issue.
Change-Id: I095f3d111423e17abaa1f951fe22efb3d2e851b7
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8872
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Added new entries missing from CHANGELOG.
Net library was removed so deprecation.md was modified.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I062149129aaf854b3038d1ab5291eb5e56ff35b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8897
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Sorted current entries and typo/formatting errors in
preparation for SPDK 21.07.
Signed-off-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Change-Id: I108ef6ffb65a4f3bc713696c5f2d4ef8903d192a
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8896
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Modified get_pollers_data() function to use already sorted
poller array across spdk_top.
Modified related display functions and sort_pollers() to
accomodate the change.
Deleted prepare_poller_data() and copy_pollers().
Modified show_poller() to use a single entry from pollers
array instead of all of them.
Modified refresh_pollers_tab() to handle changing
number of entries in a different manner.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I26936fbc96e7cb598a33b2fe4354b03277d88061
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8638
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Create local structs to fill with RPC data, sort and then
copy into a global poller array inside get_pollers_data().
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I545392cbdc699e4d96f1d39611a6e694e209c25d
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8234
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
get_last_run_counter() and get_last_busy_counter() upwards
Moves these functions above get_pollers_data() for use in next patch.
Moves enum sort_type to the section with struct definitions.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I795c02a660e987f5e9689dab07f14479d1026d99
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8057
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
This patch aims to reduce number of core structures.
All related functions that use global core structures are reworked.
Part of code with poller and thread counter per core is moved to
data gathering function.
Additionally deletes double newline between functions.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I31034e5d889fe24b067a407ca348ba07c58ce6b6
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8565
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
This batch_op field is not necessary because we can
use the comp_ctx->desc->opcode to judge whether it is related
a batched task or not.
Change-Id: Id329221ccf272c4c3bb8c1b5ec08433029a9a1f8
Signed-off-by: Ziye Yang <ziye.yang@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8865
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Changpeng Liu <changpeng.liu@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Community-CI: Mellanox Build Bot
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
This reverts commit 5e03beae70.
As it happens, Soft-RoCE is not capable of handling all the test cases
in the vhost suite.
Signed-off-by: Michal Berger <michalx.berger@intel.com>
Change-Id: Iccbbe3a7314cc68bb4feca700fa6d943c961bd2b
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8894
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Pawel Piatek <pawelx.piatek@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Implement bdev_nvme_reset_controller rpc, which allows the NVMe
controller to be reset over RPC. Implement bdev_nvme_reset_rpc()
which starts the reset of the controller and returns the result of
the controller reset via the callback function after it completes.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: Id98d5e56feb315b7e44e9bb5e5f495e9b1cd1de0
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8456
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
In bdev_nvme_reset_ctrlr(), get a controller reset context and start
a poller that calls spdk_nvme_ctrlr_reset_poll_async() to perform the
controller reset asynchronously.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I1e3ae42291c3b43b69c99ca56997dc1965c3ac59
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8454
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Implement an async variant of spdk_nvme_ctrlr_reset(). This initial
implementation only allocates a context and returns it to the caller,
relying on the caller to poll the context to execute the existing
spdk_nvme_ctrlr_reset() implementation.
Wire up spdk_nvme_ctrlr_reset() to use this async variant to verify
that NVMe controller reset still works.
Signed-off-by: Jonathan Teh <jonathan.teh@mayadata.io>
Change-Id: I75d4b75dbf5897db452ee65286aef5a4eb839fca
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8330
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Aleksey Marchuk <alexeymar@mellanox.com>
Merge core_info into rpc_core_info to increase readability.
Delete g_cores_history to reduce number of cores structures in spdk_top.
Add temporary cores structure to get_cores_data() to fill with
data from RPC call. This is to allow fields last_busy and last_idle
in g_cores_stats.cores.core_info structure to retain their values
and assign new ones with each data_thread_routine() loop.
Change core display across spdk_top accordingly (change places
where g_cores_history was used to use g_cores_stats instead)
Delete get_core_last_stats(), because it is called only in one
place and can be replaced with direct assignment of two values.
Delete last_page variable from refresh_cores_tab.
That variable was used to decide which core entries to update,
and since we collect and update data for all entries elsewhere,
this is not needed anymore.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I4a5a4c90098401876b214068725a8fce29766a12
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/6449
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
This patch aims to reduce memory needed to run spdk_top by removing some
of thread data structures and also to rework thread RPC functions.
Related functions that use thread structures for data gathering and
display will be modfied to accomodate new changes.
free_rpc_threads_stats() will be removed, because we now allocate
memory on stack instead of heap and manually freeing is no longer
needed.
Deleted last_page variable in refresh_threads(), because it was
not used.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I73c30637b26434dad7ea55a9866887b1988166b1
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8533
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Poller state does not change back from Busy to Idle after it
has finished its work and this patch aims to resolve that issue.
Added a field in poller history to store last busy_count of each
poller for later comparisons with current values.
Added a function to get last busy count of a poller.
Modified related display functions.
Fixes#2037
Change-Id: I214e41133eaf90b0f1d7995a53e577a7c1c5d33e
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8755
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
New pollers did not have a corresponding run_counter_history entry
when displaying data for the first time after they were created.
If user enabled g_interval_data and observed the creation of the poller,
application crashed due to get_last_run_counter() returning NULL pointer.
Fixes#1995
For new pollers there is no historical data and current last_run_counter,
matches the expected last_run_counter for displayed spdk_top interval.
get_last_run_counter() now returns 0 when matching run_counter_history is
missing. Avoiding dereference of a NULL pointer.
While here modified copy_pollers() to no longer get and store the last run counter
twice. When doing reset_last_counter only storing the new last run counter is needed.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I5218c9ac0f2f79da32840cf64b4083642893f5cc
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8683
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
This patch aims to reduce memory usage by deleting chain of poller structs
that depend on each other.
Reworked RPC related functions to use only one poller structure.
Reworked prepare_poller_data() and copy_pollers() to accomodate new change.
Changed display functions, which use poller data.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: I0252f93e47fec6a3298f07463aebd495697274bf
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8519
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Deletes core num variable inside refresh_cores_tab,
because it is used only in one place.
Change-Id: Ie10a7b53487da507cb8d0babab6d00eb2f9412ca
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8715
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
Currently spdk_top retains selected thread sorting for one application
loop only, because it is performed before all assignment operations are
done.
This is a problem when 'sort by core' is selected, because threads are
sorted before core assignment happens.
This patch aims to resolve that issue.
Signed-off-by: Krzysztof Karas <krzysztof.karas@intel.com>
Change-Id: Ide6d025d5e4e31a8fda713703a822e976468f326
Reviewed-on: https://review.spdk.io/gerrit/c/spdk/spdk/+/8629
Tested-by: SPDK CI Jenkins <sys_sgci@intel.com>
Community-CI: Broadcom CI <spdk-ci.pdl@broadcom.com>
Community-CI: Mellanox Build Bot
Reviewed-by: Tomasz Zawadzki <tomasz.zawadzki@intel.com>
Reviewed-by: Ben Walker <benjamin.walker@intel.com>
Reviewed-by: Shuhei Matsumoto <shuhei.matsumoto.xt@hitachi.com>
Reviewed-by: Konrad Sztyber <konrad.sztyber@intel.com>
